HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Spesifikasi
- Sirkuit mbukak voltage: 4V kanggo 12V
- Resistansi isolasi (DC voltage):
- Tes voltage [V]
- Range [M]
- Resolution [M]
- Akurasi
- Arus tes maksimal: 5.81A (at 265V); 10.10A (at 457V)
- Tes voltage kisaran: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Proteksi safety: Z Line (Line-Line, Line-Neutral, Line-PE)
- Bahan isolasi: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Range (mA)
- Resolusi (mA)
- Batasi kontak voltage (ULIM): 25 V, 50 V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage sawetara.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
Pengujian RCD
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage miturut spesifikasi.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Sirkuit mbukak voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Z Line (Line-Line, Line-Neutral, Line-PE)
Range []
Resolusi []
Akurasi
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Tes saiki maksimal
5.81A (at 265V); 10.10A (at 457V)
Tes voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
First fault current (sistem IT)
Range (mA)
Resolusi (mA)
0.1 0.9
0.1
1 999
1
Batasi kontak voltage (ULIM)
25 V, 50 V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ING ENGGO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
Tes RCD (jinis kasus cetakan)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Line-PE, Line-N voltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Frekuensi:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
Tipe RCD
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA, 10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 IN
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1/2
x 1
x 2
x 5
OTOMATIS
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A / F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1/2
x 1
x 2
x 5
OTOMATIS
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ING ENGGO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Tes ing tester tundha bocor bumi RCDs (karo aksesori opsional RCDX10)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Frekuensi:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Earth leakage delay tester RCDs tripping current (RCD Umum)
Tipe RCD
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1 ING
– 0%, +5%IN
Penguji tundha kebocoran bumi RCDs trip out range time [ms] (sistem TT/TN)
x 1/2
x 1
x 2
x 5
OTOMATIS
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1/2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Tes voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Range []
Resolusi []
Akurasi (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Range []
Resolusi []
Akurasi (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ING ENGGO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Kontak voltage (RCD lan NoTripTest)
Range [V]
Resolusi [V]
0 Utlim
0.1
Kontak voltage (EARTH test TT system)
Range [V]
Resolusi [V]
0 99.9
0.1
Kontak voltage (EARTH test TN system)
Range [V]
Resolusi [V]
0 99.9
0.1
100 999
1
Resistansi lemah kanthi metode 3-kawat
Range []
Resolusi []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Tes saiki:
<10mA 77.5Hz, Open-circuit voltage: <20Vrms
(*) Tambah 5% kanggo akurasi yen probe resistances (Rs utawa Rh) > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Akurasi (*)
(5.0 rdg + 3dgt)
Resistivitas lemah kanthi metode Wenner 4-kawat
Jarak [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00m 3.14m
0.01M
(*) with distance d=10m, Distance “d” range:
1 10m
Tes saiki:
<10mA 77.5Hz, Open-circuit voltage: <20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Rotasi urutan fase kanthi metode 1-kawat
Voltage kisaran PN, P-PE[V]
Rentang frekuensi
100 265
50Hz/60Hz 5%
Pangukuran mung ditindakake kanthi kontak langsung karo bagean urip logam (ora ing sarung insulasi)
Voltage drop on main power lines (V%)
Range (%)
Resolusi (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Arus bocor (dening HT96U opsional clamp transduser)
Range [mA]
Resolusi [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Parameter lingkungan (fungsi AUX)
Paramèter
Range
Suhu [°C]
-20°C 80°C
Suhu [°F]
-4°F 176°F
Kelembapan relatif [%HR]
0 100%HR
DC output voltage
0.1mv 1.0v
0.001Lux 20.00 Lux (*)
Cahya [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Akurasi probe lux HT53 miturut Kelas AA
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ING ENGGO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Pengukuran parameter utama lan harmonik (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Accuracy (1.0rdg + 1dgt)
Frekuensi
Rentang [Hz]
Resolusi [Hz]
42.5 69.0
0.01
Diijini voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Accuracy (2.0rdg + 2dgt)
AC TRMS Saiki
FS clamp
Range [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Resolusi [A] 0.01 0.1 1
Akurasi
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Range [kW]
Resolusi [kW]
Akurasi
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Range [kVAr]
Resolusi [kVAr]
Akurasi
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Faktor daya (@ 230V ing sistem 1Ph, 400V ing sistem 3Ph, f=50.0Hz)
Range
Resolusi
Akurasi
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Range
Resolusi
Akurasi
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage harmonika (@230V ing sistem 1Ph, 400V ing sistem 3Ph, f=50.0Hz)
Rentang [%]
Resolusi [%]
dhawuh
Akurasi
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Harmonik saiki (f=50Hz)
Rentang [%]
Resolusi [%]
0.1 100.0
0.1
Urutan 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ING ENGGO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. SPESIFIKASI UMUM
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75 mm 1.2 kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overvoltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Instrumen iki nyukupi syarat Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Instrumen iki nyukupi syarat Petunjuk Eropa 2011/65/EU (RoHS) lan 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ING ENGGO
Diensten van EURO-INDEX
EURO-INDEX minangka pabrik, importir lan distributeur saka macem-macem A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, ook kennisdeling liwat EURO-INDEX Academy lan verhuur van instrumenten.
Geautoriseerd Service Centrum EURO-INDEX bv is van alle vertegenwoordigde merken een Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant and beschikken over the juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven utuh.
Kalibratielaboratorium
Ons moderne service- en kalibratielaboratorium beschikt liwat een
Akreditasi RvA karo NEN-EN-ISO/IEC 17025. Akreditasi
geldt voor grootheden, Zoals gespecificeerd in de scope bij accreditatienummer K105.
Infone lur
Sampeyan bisa ngetung kanthi overzicht ing euro-index.nl/diensten
Layanan seluler
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
en Zaventem beschikken wij ook liwat laboratoria op wielen ketemu
jeneng "Layanan Mobile". Dit biedt vertrouwde
layanan en kwaliteit, bij u voor de deur!
Infone lur
KWS®
KWS® minangka sistem layanan sing unik kanggo piranti sampeyan
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digitaal beschikbaar via Mijn KWS (gratis webportal ing app).
Infone lur
Verhuur van meetinstrumenten
Uitgebreid macem-macem
Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Infone lur
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Infone lur
Servicebalie
Onderhoud, reparatie lan kalibratie
Cursussen ing bengkel
Layanan seluler
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Dokumen / Sumber Daya
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdf] Pandhuan MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |