HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Specifikacijos
- Atviros grandinės tūristage: Nuo 4V iki 12V
- Izoliacijos varža (nuolatinė įtampatage):
- Bandomasis ttage [V]
- Diapazonas [M]
- Resolution [M]
- Tikslumas
- Didžiausia bandymo srovė: 5.81A (at 265V); 10.10A (at 457V)
- Bandomasis ttage diapazonas: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Saugos apsauga: Z linija (linija-linija, linija-neutrali, linija-PE)
- Izoliacinės medžiagos: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Diapazonas (mA)
- Skiriamoji geba (mA)
- Apriboti kontaktą ttage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage asortimentas.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
RCD testavimas
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage pagal specifikacijas.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Atviros grandinės tūristage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage >10V
Z linija (linija-linija, linija-neutrali, linija-PE)
Diapazonas []
Rezoliucija []
Tikslumas
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Didžiausia bandymo srovė
5.81A (at 265V); 10.10A (at 457V)
Bandomasis ttage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Pirmojo gedimo srovė (IT sistemos)
Diapazonas (mA)
Skiriamoji geba (mA)
0.1 0.9
0.1
1 999
1
Apriboti kontaktą ttage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KUR MES ESAME
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
RCD bandymas (lietų korpusų tipas)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6 mA, 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, 650 mA, 1000 mA
Linija-PE, Linija-N tūriotage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Dažnis:
50/60 Hz 5 %
RCD tripping current (Molded case type RCD General)
RCD tipas
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA, 10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
„0.1 IN“
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A / F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTOMATINIS+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KUR MES ESAME
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Nuotėkio įžeminimo uždelsimo testerio RCD bandymas (su papildomu RCDX10 priedu)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Dažnis:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Įžeminimo nuotėkio uždelsimo testerio RCD suveikimo srovė (RCD bendroji informacija)
RCD tipas
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1IN
– 0%, +5%IN
Įžeminimo nuotėkio delsos testerio RCD išjungimo laiko diapazonas [ms] (TT/TN sistema)
x 1 / 2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Bandomasis ttage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Diapazonas []
Rezoliucija []
Tikslumas (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Diapazonas []
Rezoliucija []
Tikslumas (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KUR MES ESAME
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Susisiekti ttage (RCD ir „NoTripTest“)
Diapazonas [V]
Rezoliucija [V]
0 Utlim
0.1
Susisiekti ttage (EARTH test TT system)
Diapazonas [V]
Rezoliucija [V]
0 99.9
0.1
Susisiekti ttage (EARTH test TN system)
Diapazonas [V]
Rezoliucija [V]
0 99.9
0.1
100 999
1
Įžeminimo varža su 3 laidų metodu
Diapazonas []
Rezoliucija []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01 tūkst
Bandymo srovė:
<10mA 77.5Hz, Open-circuit voltage: < 20 Vrms
(*) Pridėkite 5 % prie tikslumo, jei zondo varža (Rs arba Rh) > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Tikslumas (*)
(5.0 rdg + 3dgt)
Dirvožemio varžos matavimas naudojant 4 laidų Wennerio metodą
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01 tūkst
10.0k 99.9k
0.1 tūkst
100k 999k
1k
1.00 mln. 3.14 mln
0.01 mln
(*) with distance d=10m, Distance “d” range:
1m
Bandymo srovė:
<10mA 77.5Hz, Open-circuit voltage: < 20 Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Fazių sekos sukimas naudojant 1 laido metodą
ttage diapazonas PN, P-PE[V]
Dažnių diapazonas
100 265
50Hz/60Hz 5%
Matavimas atliekamas tik tiesiogiai kontaktuojant su metalinėmis įtampingosiomis dalimis (ne ant izoliacijos apvalkalo).
ttage drop on main power lines (V%)
Diapazonas (%)
Rezoliucija (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Nuotėkio srovė (pagal HT96U pasirenkamą cl)amp keitiklis)
Diapazonas [mA]
Rezoliucija [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Aplinkos parametrai (AUX funkcija)
Parametras
Diapazonas
Temperatūra [°C]
-20°C 80°C
Temperatūra [°F]
-4°F 176°F
Santykinė drėgmė [%HR]
0 100%HR
DC išėjimo tūristage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Apšvietimas [liuksai]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) HT53 liukso zondo tikslumas atitinka AA klasę
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KUR MES ESAME
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Pagrindinių parametrų ir harmonikų matavimas (PQA)
AC TRMS ttage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Accuracy (1.0rdg + 1dgt)
Dažnis
Diapazonas [Hz]
Raiška [Hz]
42.5 69.0
0.01
Leidžiamas ttage: 15.0 459.9V ; Allowed current: 5%FS clamp FS klasėamp
Accuracy (2.0rdg + 2dgt)
AC TRMS srovė
FS klasėamp
Diapazonas [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Rezoliucija [A] 0.01 0.1 1
Tikslumas
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS klasėamp
Diapazonas [kW]
Raiška [kW]
Tikslumas
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS klasėamp
Diapazonas [kVAr]
Skiriamoji geba [kVAr]
Tikslumas
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Galios koeficientas (@ 230 V 1 fazės sistemose, 400 V 3 fazių sistemose, f = 50.0 Hz)
Diapazonas
Rezoliucija
Tikslumas
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Diapazonas
Rezoliucija
Tikslumas
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
ttage harmonikos (@ 230 V 1 fazės sistemose, 400 V 3 fazių sistemose, f = 50.0 Hz)
Diapazonas [%]
Skiriamoji geba [%]
Užsakyti
Tikslumas
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Srovės harmonikos (f=50Hz)
Diapazonas [%]
Skiriamoji geba [%]
0.1 100.0
0.1
Užsakyti 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KUR MES ESAME
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. BENDROSIOS SPECIFIKACIJOS
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75 mm 1.2 kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overvoltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Šis instrumentas atitinka Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Ši priemonė atitinka Europos direktyvų 2011/65/ES (RoHS) ir 2012/19/ES (EEĮ) reikalavimus.
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KUR MES ESAME
Diensten van EURO-INDEX
EURO-INDEX yra gamintojas, importuotojas ir platintojas iš įvairių A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling via de EURO-INDEX Academy en verhuur van instrumenten.
Geautoriseerd Service Centrum EURO-INDEX bv yra visavertis junginys iš Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door Technici die zijn opgeleid door de fabrikant en beschikken over de juiste gereedschhappen en programinė įranga. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, Evenals de sertifikavimo (ATEX, EN50379 ir kt.) blijven nepažeistas.
Kalibratielaboratorium
Ons moderne service- en kalibratielaboratorium beschikt over een
RvA akreditacija pagal NEN-EN-ISO/IEC 17025. Deze accreditatie
geldt voor grootheden, zoals gespecificeerd in de apjoms bij accreditatienummer K105.
Daugiau info
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
Mobiliojo ryšio paslauga
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
lt Zaventem beschikken wij ook over laboratoria op wielen met
de naam „Mobile Service“. Dit biedt vertrouwde
service en kwaliteit, bij u voor de deur!
Daugiau info
KWS®
KWS® yra unikali paslaugų sistema, skirta susitikti su instrumentais
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Atnaujinkite skaitmeninį kalibravimo sertifikatą per Mijn KWS (nemokamai webportalas en programėlė).
Daugiau info
Verhuur van meetinstrumenten
Uitgebreid asortimentas
Nauwkeurigheid aantoonbaar door actue kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Daugiau info
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Daugiau info
Servicebalie
Onderhoud, reparatie en kalibratie
Cursussen en seminarai
Mobiliojo ryšio paslauga
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Dokumentai / Ištekliai
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdfInstrukcijos MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |