HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester

Specifikacije

• Odprto vezje voltage: 4 V do 12 V
• Izolacijska upornost (DC voltage):
  • Test voltage [V]
  • Razpon [M]
  • Resolution [M]
  • Natančnost
• Največji preskusni tok: 5.81A (at 265V); 10.10A (at 457V)
• Test voltage razponi: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
• Varnostna zaščita: Z-linija (linija-linija, linija-nevtralni vodnik, linija-PE)
• Izolacijski materiali: PVC, Rubber butyl, EPR, XLPE
• First fault current (IT systems):
  • Območje (mA)
  • Ločljivost (mA)
• Omejitev stika voltage (ULIM): 25V, 50V

Electrical Safety Testing

1. Connect the safety tester according to the specified voltage območje.
2. Select the appropriate insulation resistance test voltage.
3. Measure the insulation resistance and ensure it falls within the specified accuracy range.
4. Check the maximum test current and ensure it is within the safe limits for testing.
5. Perform first fault current tests as required.

Testiranje RCD

1. Select the RCD type and rated tripping currents for testing.
2. Set the Line-PE and Line-N voltage v skladu s specifikacijami.
3. Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.

“`

Odprto vezje voltage: Short circuit current: Nominal test current: Safety protection:

nominal test voltage ­0% +10% <6.0mA at 500V test voltage

>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage >10V

Z-linija (linija-linija, linija-nevtralni vodnik, linija-PE)

Razpon []

Ločljivost []

Natančnost

0.00 199.9 m (*) 200 1999 m (*)

0.1 m (*) 1 m (*)

(5.0 rdg + 1m) (*)

0.01 9.99 10.0 199.9

0.01 0.1

(5.0 rdg + 3dgt)

(*) By means of IMP57 optional accessory

Največji preskusni tok

5.81A (at 265V); 10.10A (at 457V)

Test voltage ranges: Protection type: Insulation materials:

100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE

Tok prve kratkostične napake (IT sistemi)

Območje (mA)

Ločljivost (mA)

0.1 0.9

0.1

1 999

1

Omejitev stika voltage (ULIM) 

25V, 50V

Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

KJE SMO

MAKROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 2 of 6

Preizkus RCD (tip z litim ohišjem)

RCD type:

AC ( ), A/F ( ), B/B+( ) ­ General (G), Selective (S) and Delayed ( )

Rated tripping currents (IN)::

6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA

Linija-PE, linija-N vol.tage:

100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+

Pogostost:

50/60Hz 5%

RCD tripping current (Molded case type ­ RCD General)

RCD tip

IN

Range IN [mA] Resolution [mA]

AC, A/F, B/B+

6 mA, 10 mA

AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN

0.1 IN

AC, A/F 500mA IN 650mA

Accuracy IN – 0%, +10%IN
– 0%, +5%IN

RCD Molded type tripping time range [ms] (TT/TN system)

x 1 / 2

x 1

x 2

x 5

AUTO

GS

GS

GS

GS

GS

6 mA 10 mA 30 mA

m

AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210

50 150 50 150
50 150 50 150
50 150 50 150

B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210

50 150 50 150

B/B+ 999 999 999 999 999 999

AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999

AC 999 999 999 999 999 999 160 210

500 mA 650 mA

A / Ž

999 999 999 999 999 999 160 210

B/B+

50 150 50 150
50 150

AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)

RCD Molded type tripping time range [ms] (IT system) (*)

GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310

AUTO+ G S

x 1 / 2

x 1

x 2

x 5

AUTO

GS

GS

GS

GS

GS

6mA AC 999 999 999 999 999 999 160 210

10mA A/F 999 999 999 999 999 999 160 210

30mA B/B+ 999 999

999 999

100 mA 300 mA

AC A/F B/B+

999 999 999

999 999 999

999 999

999 999 999

999 999 999

999 999

160 160

210 210

500 mA 650 mA

AC A/F B/B+

999 999

999 999

999 999

999 999

999 999

999 999

160 160

210 210

50 150 50 150
50 150 50 150
50 150

AC 999 999 1000mA A/F 999 999
B/B+

999 999 999 999

160 210

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country

GS
310 310 310 310 310

SAMODEJNO+
GS

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

KJE SMO

MAKROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 3 of 6

Preizkus na testerju zakasnitve uhajanja ozemljitve RCD (z dodatno opremo RCDX10)

RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Frekvenca:

AC ( ), A/F ( ), B/B+( ) ­ General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%

Tester zakasnitve uhajanja ozemljitve, izklopni tok RCD-jev (RCD splošno)

RCD tip

IN

Range IN [mA] Resolution [mA]

Accuracy IN

AC, A/F, B/B+ AC, A/F

300mA IN 1A 1.1A IN 10A

(0.3 1.1) IN

0.1IN

– 0%, +5%IN

Časovno območje izklopa testerja zakasnitve uhajanja ozemljitve RCD [ms] (sistem TT/TN)

x 1 / 2

x 1

x 2

x 5

AUTO

0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A

GS

GS

GS

AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+

AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+

G S 50 150 50 150
50 150 50 150
50 150 50 150

GS

G S 310 310 310 310 310
310 310

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)

x 1 / 2

x 1

x 2

x 5

GS

GS

GS

GS

0.3A
3.0A

AC A/F B/B+

999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250

50 150 50 150

3.1A
6.5A

AC A/F B/B+

999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250

50 150 50 150

6.6A
10.0A

AC A/F B/B+

999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country

AUTO G S

G S 310
310

NoTripTest ­ Non-trip earth loop impedance

Test voltage:

100265V (Line-PE), 50/60Hz 5%

NoTripTest ­ Systems with Neutral wire

Razpon []

Ločljivost []

Natančnost (*)

0.01 9.99

0.01

(5 reading + N/10)

10.0 199.9

0.1

(5 reading + N)

200 1999

1

(5 reading + 3N)

(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1

NoTripTest ­ Systems without Neutral wire

Razpon []

Ločljivost []

Natančnost (*)

1 1999

1

-0%, +(5.0 lettura +N)

(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

KJE SMO

MAKROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 4 of 6

Kontakt voltage (RCD in NoTripTest)

Razpon [V]

Ločljivost [V]

0 Utlim

0.1

Kontakt voltage (EARTH test ­ TT system)

Razpon [V]

Ločljivost [V]

0 99.9

0.1

Kontakt voltage (EARTH test ­ TN system)

Razpon [V]

Ločljivost [V]

0 99.9

0.1

100 999

1

Ozemljitvena upornost pri 3-žični metodi

Razpon []

Ločljivost []

0.01 9.99

0.01

10.0 99.9

0.1

100 999

1

1.00k 49.99k

0.01k

Testni tok:

<10mA ­ 77.5Hz, Open-circuit voltage: < 20Vrms

(*) Če je upornost sonde (Rs ali Rh) > 5 x Rmeas, se natančnosti doda 100 %.

Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Natančnost (*)
(5.0 rdg + 3dgt)

Upornost tal s 4-žično Wennerjevo metodo

Range [m]

Resolution [m]

0.06 9.99

0.01

10.0 99.9

0.1

100 999

1

1.00k 9.99k

0.01k

10.0k 99.9k

0.1k

100k 999k

1k

1.00M 3.14M

0.01M

(*) with distance d=10m, Distance “d” range:

1 10m

Testni tok:

<10mA ­ 77.5Hz, Open-circuit voltage: < 20Vrms

Accuracy (*) (5.0 rdg + 3dgt)

Vrtenje faznega zaporedja z enožično metodo

voltagObmočje PN, P-PE[V]

Frekvenčno območje

100 265

50Hz/60Hz 5%

Meritev se izvaja samo z neposrednim stikom s kovinskimi deli pod napetostjo (ne na izolacijskem plašču)

voltage drop on main power lines (V%)

Razpon (%)

Ločljivost (%)

0 100

0.1

Accuracy (10.0 rdg + 4dgt)

Uhajalni tok (z neobveznim HT96U clamp pretvornik)

Območje [mA]

Ločljivost [mA]

0.5 999.9

0.1

Accuracy (5.0 rdg + 2dgt)

Okoljski parametri (funkcija AUX)

Parameter

Razpon

Temperatura [°C]

-20°C 80°C

Temperatura [°F]

-4°F 176°F

Relativna vlažnost [%HR]

0 100%HR

DC izhodna voltage

0.1mV 1.0V

0.001Lux 20.00 Lux (*)

Osvetljenost [Lux]

0.1 Lux 2000 Lux (*)

1 Lux 20 kLux (*)

(*) Natančnost sonde za osvetljenost HT53 je v skladu z razredom AA

Ločljivost 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux

Accuracy (2.0rdg+2dgt)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

KJE SMO

MAKROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 5 of 6

Merjenje glavnih parametrov in harmonikov (PQA)

AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor

Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz

Accuracy (1.0rdg + 1dgt)

Pogostost

Območje [Hz]

Ločljivost [Hz]

42.5 69.0

0.01

Dovoljena voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp

Accuracy (2.0rdg + 2dgt)

AC TRMS tok

FS clamp

Razpon [A]

10A

5% FS 9.99

10A FS 200

5% FS 199.9

200A FS 3000

5% FS 2999

Range: 5 999.9 mV; Values under 5mV are zeroed

Allowed crest factor

3; Frequency: 42.5 69.0 Hz

Ločljivost [A] 0.01 0.1 1

Natančnost
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)

Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)

FS clamp

Domet [kW]

Ločljivost [kW]

Natančnost

10A

0.000 9.999

0.001

10A FS 200

0.00 999.99

0.01

1Ph: (2.0rdg + 5 dgt)

200A FS 1000

0.0 999.9

0.1

3Ph: (2.5rdg + 8 dgt)

1000A FS 3000

0 9999

1

Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)

FS clamp

Območje [kVAr]

Ločljivost [kVAr]

Natančnost

10A

0.000 9.999

0.001

10A FS 200

0.00 999.99

0.01

1Ph: (2.0rdg + 7 dgt)

200A FS 1000

0.0 999.9

0.1

3Ph: (3.0rdg + 8 dgt)

1000A FS 3000

0 9999

1

Faktor moči (pri 230 V v 1-faznih sistemih, 400 V v 3-faznih sistemih, f = 50.0 Hz)

Razpon

Resolucija

Natančnost

0.70c 1.00 0.70i

0.01

(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS

cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)

Razpon

Resolucija

Natančnost

0.70c 1.00 0.70i

0.01

(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS

voltage harmoniki (@ 230 V v 1-faznih sistemih, 400 V v 3-faznih sistemih, f = 50.0 Hz)

Razpon [%]

Ločljivost [%]

naročilo

Natančnost

0.1 100.0

0.1

01 25

(5.0rdg + 5dgt)

Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared

Tokovni harmoniki (f=50Hz)

Razpon [%]

Ločljivost [%]

0.1 100.0

0.1

Naročilo 01 9 10 17 18 25

Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

KJE SMO

MAKROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 6 of 6

2. SPLOŠNE SPECIFIKACIJE

DISPLAY AND MEMORY: Features: Memory: Communication:

Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi

POWER SUPPLY: Batteries: Battery life: Auto Power OFF:

6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)

MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:

225 x 165 x 75 mm 1.2 kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522

GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overvoltage category: Max height of use:

IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m

Ta instrument izpolnjuje zahteve Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Ta instrument izpolnjuje zahteve evropskih direktiv 2011/65/EU (RoHS) in 2012/19/EU (WEEE)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

KJE SMO

Storitve EURO-INDEX

EURO-INDEX je proizvajalec, uvoznik in distributer različnih A-merken za testiranje in srečanja. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling via de EURO-INDEX Academy en verhuur van instrumenten.

Geautoriseerd Service Center EURO-INDEX bv je van alle vertegenwoordigde merken een Geautoriseerd Service Center. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant en beschikken over de juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificiranja (ATEX, EN50379, itd.) blijven intact.

Kalibracijski laboratorij

Ons moderne service- en kalibratielaboratorium beschikt over een

RvA akreditacija v skladu z NEN-EN-ISO/IEC 17025. Deze akreditacija

geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.

Več informacij

Kijk voor een overzicht van al onze diensten na euro-index.nl/diensten

Mobilne storitve

Naast de vaste kalibratielaboratoria in Capelle aan den IJssel

en Zaventem beschikken wij ook over laboratoria op wielen met

de naam “Mobile Service”. Dit biedt vertrouwde

service en kwaliteit, bij u voor de deur!

Več informacij

KWS®

KWS® je edinstven servisni sistem za vaša srečanja

met periodiek onderhoud en kalibratie tegen vaste, lage kosten.

Uw kalibratiecertificaten zijn digitalaal beschikbaar via Mijn KWS (brezplačno webportal in aplikacija).

Več informacij

Nakup instrumentov za srečanja

Raznolik asortiman

Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat

Deskundig advies Complete levering inclusief accessoires

Več informacij

EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers

Več informacij

Storitvena balija

Onderhoud, reparatie en kalibratie

Tečaji in delavnice

Mobilne storitve

Wijzigingen voorbehouden EURO-INDEX® NL 24005

Dokumenti / Viri

HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdfNavodila MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester

Reference

• Uporabniški priročnik