HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Мушаххасоти
- Ҷилди кушодtage: 4V то 12V
- Муқовимати изолятсия (Ҷtagд):
- Ҷилди санҷишtagд [V]
- Диапазон [M]
- Қарор [M]
- Дақиқӣ
- Максимум ҷараёни санҷиш: 5.81A (at 265V); 10.10A (at 457V)
- Ҷилди санҷишtage диапазонҳо: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Муҳофизати бехатарӣ: Z Line (Line-Line, Line-Neutral, Line-PE)
- Маводҳои изолятсия: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Диапазон (мА)
- Ҳалли (mA)
- Ҳадди тамос ҷtage (ULIM): 25В, 50В
Electrical Safety Testing
- Connect the safety tester according to the specified voltagдиапазон.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
Санҷиши RCD
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltagд мувофиқи мушаххасот.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
«`
Ҷилди кушодtage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Z Line (Line-Line, Line-Neutral, Line-PE)
Диапазон []
Қарор []
Дақиқӣ
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Максимум ҷараёни санҷиш
5.81A (at 265V); 10.10A (at 457V)
Ҷилди санҷишtage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Ҷараёни хатои аввал (системаҳои IT)
Диапазон (мА)
Ҳалли (mA)
0.1 0.9
0.1
1 999
1
Ҳадди тамос ҷtage (ULIM)
25В, 50В
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
МО КУЧО ХАСТЕМ
МАКРОТЕСТG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
Санҷиши RCD (навъи парвандаи қолабӣ)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Line-PE, Line-N ҷилдиtage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Басомад:
50/60Гц 5%
RCD tripping current (Molded case type RCD General)
навъи RCD
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6мА, 10мА
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 ДАР
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
х 1
х 2
х 5
АВТО
GS
ГС
ГС
ГС
ГС
6мА 10мА 30мА
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500мА 650мА
А/Ф
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
ГС
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310 XNUMX XNUMX XNUMX
AUTO+ G S
x 1 / 2
х 1
х 2
х 5
АВТО
GS
ГС
ГС
ГС
ГС
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100мА 300мА
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500мА 650мА
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
ГС
310 310 310 310 310
АВТО+
ГС
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
МО КУЧО ХАСТЕМ
МАКРОТЕСТG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Санҷиши RCD-ҳои санҷиши таъхири ихроҷи замин (бо лавозимоти ихтиёрии RCDX10)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltagд: басомад:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Санҷиши таъхири ихроҷи замин RCD-ҳои ҷараёни қатъшавӣ (RCD General)
навъи RCD
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1IN
– 0%, +5%IN
Санҷандаи таъхири ихроҷи замин RCD-ҳо аз фосилаи вақт хориҷ мешаванд [ms] (системаи TT/TN)
x 1 / 2
х 1
х 2
х 5
АВТО
0.3А
1.0А
1.1А
3.0А
3.1А
6.5А
6.6А
10.0А
ГС
ГС
ГС
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
ГС
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
х 1
х 2
х 5
ГС
ГС
ГС
ГС
0.3А
3.0А
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1А
6.5А
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6А
10.0А
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Ҷилди санҷишtage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Диапазон []
Қарор []
Дақиқӣ (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Диапазон []
Қарор []
Дақиқӣ (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
МО КУЧО ХАСТЕМ
МАКРОТЕСТG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Тамос ҷtage (RCD ва NoTripTest)
Диапазон [V]
Қарор [V]
0 Utlim
0.1
Тамос ҷtage (EARTH test TT system)
Диапазон [V]
Қарор [V]
0 99.9
0.1
Тамос ҷtage (EARTH test TN system)
Диапазон [V]
Қарор [V]
0 99.9
0.1
100 999
1
Муқовимати замин бо усули 3-сим
Диапазон []
Қарор []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00к 49.99к
0.01к
Ҷараёни санҷиш:
<10mA 77.5Hz, Open-circuit voltagд: <20Врм
(*) Агар муқовимати зонд (Rs ё Rh) > 5 x Rmeas бошад, ба дақиқӣ 100% илова кунед
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Дақиқӣ (*)
(5.0 rdg + 3dgt)
Муқовимати хок бо усули 4-симӣ Веннер
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00к 9.99к
0.01к
10.0к 99.9к
0.1к
100к 999к
1k
1.00М 3.14М
0.01 миллион
(*) with distance d=10m, Distance “d” range:
1 10м
Ҷараёни санҷиш:
<10mA 77.5Hz, Open-circuit voltagд: <20Врм
Accuracy (*) (5.0 rdg + 3dgt)
Гардиши пайдарпаии марҳила бо усули 1-сим
Ҷилдиtage диапазони PN, P-PE[V]
Диапазони басомад
100 265
50Hz/60Hz 5%
Андоза танҳо тавассути тамоси мустақим бо қисмҳои барқии металлӣ анҷом дода мешавад (на дар қабати изолятсия)
Ҷилдиtage drop on main power lines (V%)
Диапазон (%)
Қарор (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Ҷараёни ихроҷ (аз ҷониби HT96U ихтиёрӣ clamp табдилдиҳанда)
Диапазон [mA]
Ҳалли [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Параметрҳои муҳити зист (функсияи AUX)
Параметр
Диапазон
Ҳарорат [°C]
-20°С 80°С
Ҳарорат [°F]
-4°F 176°F
Рутубати нисбӣ [%HR]
0 100%HR
Ҳаҷми баромади DCtage
0.1мВ 1.0В
0.001Lux 20.00 Lux (*)
Равшанӣ [Люкс]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Аниқии санҷиши люкс HT53 мувофиқи Синфи АА аст
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
МО КУЧО ХАСТЕМ
МАКРОТЕСТG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Андозаи параметрҳои асосӣ ва гармоника (PQA)
AC TRMS Ҷилдиtage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Дақиқӣ (1.0rdg + 1dgt)
Басомад
Диапазон [Гц]
Ҳалли [Гц]
42.5 69.0
0.01
Ҷилди иҷозатдодашудаtage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Дақиқӣ (2.0rdg + 2dgt)
AC TRMS ҷорӣ
FS clamp
Диапазон [A]
10А
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Ҳалли [А] 0.01 0.1 1
Дақиқӣ
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Диапазон [кВт]
Ҳалли [кВт]
Дақиқӣ
10А
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Диапазон [kVAr]
Ҳалли [kVAr]
Дақиқӣ
10А
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Омили барқ (@ 230В дар системаҳои 1Ph, 400V дар системаҳои 3Ph, f=50.0Hz)
Диапазон
Резолюция
Дақиқӣ
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Диапазон
Резолюция
Дақиқӣ
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Ҷилдиtagгармоникаи электронӣ (@ 230В дар системаҳои 1Ph, 400V дар системаҳои 3Ph, f=50.0Hz)
Диапазон [%]
Қарор [%]
Тартиб
Дақиқӣ
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Гармонияи ҷорӣ (f=50Hz)
Диапазон [%]
Қарор [%]
0.1 100.0
0.1
Фармоиш 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
МО КУЧО ХАСТЕМ
МАКРОТЕСТG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. МАСЪАЛАҲОИ УМУМӢ
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75мм 1.2 кг
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Аз ҳад зиёдtage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Ин асбоб ба талаботи Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Ин асбоб ба талаботи Дастури аврупоии 2011/65/EU (RoHS) ва 2012/19/EU (WEEE) қонеъ мекунад.
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
МО КУЧО ХАСТЕМ
Диенстен ван EURO-INDEX
EURO-INDEX is fabrikant, importeur en distributeur van diverse A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling via de EURO-INDEX Academy en verhuur van instrumenten.
Geautoriseerd Service Centrum EURO-INDEX b.v. is van alle vertegenwoordigde merken een Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant en beschikken over de juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.
Kalibratielaboratorium
Ons moderne service- en kalibratielaboratorium beschikt over een
RvA accreditatie naar NEN-EN-ISO/IEC 17025. Deze accreditatie
geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.
Meer info
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
Mobiele Service
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
en Zaventem beschikken wij ook over laboratoria op wielen met
de naam “Mobiele Service”. Dit biedt vertrouwde
service en kwaliteit, bij u voor de deur!
Meer info
KWS®
KWS® is een uniek servicesysteem voor uw meetinstrumenten
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digitaal beschikbaar via Mijn KWS (gratis webportaal en app).
Meer info
Verhuur van meetinstrumenten
Uitgebreid assortiment
Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Meer info
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Meer info
Servicebalie
Onderhoud, reparatie en kalibratie
Cursussen en workshops
Mobiele Service
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Ҳуҷҷатҳо / Сарчашмаҳо
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdf] Дастурҳо MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |