Abubuwan da ke ciki boye
1 GOSSEN METRAWATT SECUTEST SI+ Memory And Input Module
2 Aikace-aikace
3 Halayen Tsaro da Kariyar Tsaro
4 Farawa
5 Saiti
6 Yadda ake Nunawa da Ajiye Rahotanni
7 Kididdiga
8 Aiki tare da Barcode Reader
9 Musayar bayanai tare da PC
10 Saƙon kuskure
11 Bayanan Fasaha
12 Kulawa
13 Sabis na Gyara da Sauyawa
14 Tallafin samfur
15 Takardu / Albarkatu
15.1 Magana

GOSSEN-METRAWATT-logo

GOSSEN METRAWATT SECUTEST SI+ Memory And Input Module

GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-samfurin-Module

Daidaitaccen Kayan aikiGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 1

1 Input and memory module SECUTEST SI+,
1 kebul na USB,
1 Umarnin aiki

Ana samun software na sarrafa Driver don shigar da direban na'urar USB daga namu website.

  1. Kebul na ribbon tare da filogi na RS232 don haɗin ƙirar SI zuwa mai gwadawa
  2. Mai haɗa soket na USB don watsa bayanan da aka adana zuwa PC
  3. Siginar LED tana haskaka kore lokacin da kebul na USB ke aiki muddin an shigar da direban na'urar USB zuwa PC da aka haɗa
  4. Siginar LED tana haskaka kore lokacin da RS232 ke aiki
  5. RS232 soket haɗi don PC, Barcode reader ko RFID na'urar daukar hotan takardu
  6. Knurled dunƙule
  7. LED siginar, yana haskakawa a takaice lokacin da aka haɗa shi da kayan gwajin kuma ya kasance a kashe daga baya
  8. Share mabudiGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 2 don share haruffa ɗaya ko kammala layi dangane da maɓallin motsiGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 3
  9. Shigar da maɓalliGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 4 don kammala shigarwar kuma je zuwa ga shigarwa na gaba
  10. Makullin sarari don shigar da sarari
  11. Maɓallin ajiyaGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 6 don adana rahoton gwaji na ƙarshe
  12. Maɓallin sauyawaGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 3 don matsar da madannai daga ƙananan haruffa zuwa manyan haruffa da akasin haka
    MaɓalliGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 7 matsawa zuwa cikakken tasha (.)
    MaɓalliGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 8 canza zuwa layi ( _ )
  13. MaɓalliGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 9 don kunna SI module
  14. Matsa don gyara gubar bincike a cikin murfin SECUTEST…

Haɗin umarnin madannai don shigar da rahoto
(kawai don SECUTEST… kayan gwaji)

GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 10Yana share layin da aka sanya siginan kwamfuta akansa.
An share duk shigarwar rubutu,
GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 11muddin aka sanya siginan kwamfuta a cikin sashin shigarwar rubutu mai aiki
GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 12An share rahoton da aka adana na ƙarshe, muddin babu taga siginar SI mai aiki.
GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 13An sake saiti, an fara tsarin SI, an share duk bayanan da aka adana!
Wannan yana yiwuwa ne kawai a cikin Saita menu a ƙarƙashin Share ƙwaƙwalwar ajiya.

Aikace-aikace

Si (Storage Interface) na'urar SECUTEST SI+ na'ura ce ta musamman don waɗannan kayan gwajin masu zuwa: SECUTEST…, SECULIFE ST, RIBAR 204 da METRISO 5000 D-PI. An shigar da shi a cikin murfin mai gwadawa kuma an ɗaure shi da kn biyuurled sukurori. Sakamakon gwajin da aka ƙaddara tare da kayan gwajin ana canjawa wuri kai tsaye zuwa ƙirar SI ta layin kintinkiri.

SECUTEST Application…
Duk ƙimar da aka auna don rahotanni kusan 300 (adadin ranar aiki ɗaya) ana iya adana su a cikin wannan ƙwaƙwalwar ajiya.
Ta hanyar tashar jiragen ruwa na RS232 ko kebul na kebul, ana iya canza ma'aunin ma'auni da aka adana daga SECUTEST SI+ zuwa PC, adanawa da sarrafa su a can tare da fakitin software (misali don shirya daftari), ko buga kai tsaye zuwa cikin wanda aka riga aka yi. tsari.

Lura
Wayar da bayanai daga ƙwaƙwalwar ajiyar siginar SI zuwa PC ta hanyar RS232 ko kebul na USB yana yiwuwa ne kawai lokacin da aka haɗa na'urar SI zuwa kayan gwajin.

Lura
Wayar da bayanai daga ƙwaƙwalwar ajiyar siginar SI zuwa PC ta hanyar kebul na USB yana yiwuwa ne kawai idan kun shigar da direban na'urar da ake buƙata zuwa PC ɗin ku ta software na Kula da Direbobi.

Kebul Na'urar Direba
Software na Kula da Direbobi don shigar da direban na'urar USB gami da umarnin aiki don saukewa daga namu website https://www.gmc-instruments.de/en/services/download-center/

Shirye-shiryen Farawa Kyauta
An wuceview na sabon rahoto da ke samar da software tare da kuma ba tare da bayanan bayanai don masu gwadawa (shirgin farawa kyauta da software na demo don sarrafa bayanai, rahoto da tsara lissafin) ana bayar da su akan mu. website. Ana iya sauke waɗannan shirye-shiryen kai tsaye ko bayan rajista. https://www.gmc-instruments.de/en/services/download-center/

Ribar Aikace-aikacen 204 da METRISO 5000 D-PI
Aiki tare da waɗannan kayan aikin gwaji ya iyakance ga aikin "Shigar da sharhi ta hanyar madannai na haruffa." Waɗannan surori ne kawai suka dace a cikin wannan mahallin:

babi. 2 Halayen Tsaro da Kariyar Tsaro
babi. 3.1 Shigar da Module SI
babi. 10 Bayanan fasaha (ba tare da aikin ƙwaƙwalwar ajiya ba)
babi. 11, 12 da 13 Kulawa da Adireshi

Ma'anar Alamomin Kan Raka'a

GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 14Gargadi game da wani batu na haɗari
(A hankali: lura da takardun!)
GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 15yana nuna daidaiton EC
GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 16Ba za a iya zubar da wannan na'urar tare da sharar ba. Ana iya samun ƙarin bayani game da alamar WEEE akan Intanet a www.gossenmetrawatt.com ta hanyar shigar da kalmar bincike WEEE.

Halayen Tsaro da Kariyar Tsaro

Lokacin da aka yi amfani da SECUTEST SI+ da kyau, an tabbatar da amincin mai amfani da naúrar.
Domin saduwa da ƙa'idodin doka don daidaitawar lantarki (EMC), ana amfani da kayan filastik mai sarrafa wutar lantarki don gidaje don garkuwa. Taɓa tsarin SI a ƙarƙashin aiki na yau da kullun yana haifar da babu haɗari kamar lamba mai haɗari voltages ba ya faruwa a cikin SECUTEST SI+.

Hankali!
Gidajen tsarin SI yana da halaye masu sarrafa wutar lantarki waɗanda suka yi kama da na ƙarfe. Kada ya zo cikin haɗin gwiwa tare da sassan rayuwa.

Karanta umarnin aiki a hankali kuma gaba ɗaya kafin amfani da naúrar ku kuma bi su ta kowace fuska.

Ajiyayyen Bayanai (kayan aikin SECUTEST… kawai)
Za a iya adana ma'auni, rahoto da bayanan shigarwa cikin aminci a cikin RAM na SECUTEST SI+ ma'aji.
Muna ba ku shawara da ku aika da bayanan da aka adana akai-akai zuwa PC don hana yuwuwar asarar bayanai a cikin tsarin ajiya. Ba mu ɗaukar alhakin kowane asarar bayanai. Don sarrafa bayanai da sarrafa bayanai muna ba da shawarar fakitin software, duba shafi na 7.

Farawa

Shigar da Module SI

  • SECUTEST… kawai: Cire murfin daga murfin SECUTEST…. Don wannan dalili, danna murfin zuwa gefe.
  • Saka tsarin SI a cikin murfi kuma a ɗaure shi da kn biyuurled rike sukurori.
  • Haɗa ƙirar zuwa soket ɗin haɗin haɗin haɗin RS232 na kayan gwajin ta hanyar kebul na ribbon.
  • SECUTEST… kawai: Ƙarƙashin tsarin SI akwai ɗaki da aka tanadar a cikin murfi don adana gubar bincike. Kulle maɗaurin da aka saka a cikin ƙirar a kan madaidaicin murfi don kada gubar binciken ya faɗo lokacin da murfin ya rufe.

Kunna Module SI
Don kunna tsarin SI, dole ne a kafa haɗin kai zuwa RS232 interface na SECUTEST… kuma dole ne a haɗa kayan aikin gwaji zuwa manyan hanyoyin sadarwa.

Hankali!
Idan dai siginar lamp yana haskakawa a tsarin SI, ana yin aiki tare tsakanin kayan gwajin da tsarin SI wanda ba za a iya shigo da bayanan gwaji daga tsarin SI ba. Kada ka danna kowane maɓalli a kayan gwajin.

Farko na farko – Share ƙwaƙwalwar ajiya
Don farawa na farko, yakamata a share ƙwaƙwalwar gaba ɗaya ta hanyar sake saiti:

  • Kunna aikin menu ta latsa GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 9.
  • Zaɓi Menu na Saita sannan kuma menu Share ƙwaƙwalwar ajiya.
  • Latsa GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 13 lokaci guda.
  • Sake saita kwanan wata da lokaci bayan farawa.

Danna 1xGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 9

Zaɓi da aiwatar da ayyukan da aka jera a cikin menu ana yin su ta hanyar maɓallan da suka dace akan kayan gwajin. Sauran sarrafawar sarrafawa da masu haɗin kai yakamata su kasance ba su canzawa yayin da tsarin SI ke aiki don kada a damun zirga-zirgar bayanai.
Abun menu "Komawa" yana haifar da komawa ga nunin LC da aka gabatar kafin kunna tsarin SI.
NuniGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 18 ya nuna cewa an riga an mamaye kashi 10% na ƙarfin ajiya. Lokacin da 99% na ƙwaƙwalwar ajiya ya cika, ya kamata a watsa bayanan zuwa PC kuma a adana a can. Daga baya, dole ne a share bayanan da ke akwai kafin a iya adana sabbin bayanai zuwa ƙwaƙwalwar ajiya. In ba haka ba, saƙonnin "Cikin Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwa" suna bayyana.GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 17

Saiti

Bayan zaɓin abin menu "Setup" za ku iya aiwatar da saitunan masu zuwa:GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 19

Saita Agogo
Lura:
Da fatan za a tabbatar cewa an saita kwanan wata da lokaci ɗaya a cikin kayan gwajin da aka haɗa.GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 20

Shigar kuma Share Sama da Layi na ƙasaGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 21

Daga maballin madannai, zaku iya shigar da rubutun zaɓi waɗanda - kafin da/ko bayan sakamakon gwajin - za'a haɗa su ta atomatik a cikin buga rahoton.
Don layukan sama da ƙasa, akwai layukan 5 na haruffa 24 kowannensu.
Layukan sama da ƙasa iri ɗaya ne ga duk sakamakon gwaji a ƙwaƙwalwar ajiya.
Shigar da rubutun ta hanyar madannai.
Ana iya shigar da bayanai ta hanyar mai karanta lambar sirri (duba babi na 7, shafi na 20).

  • Za ku je layi na gaba ta danna maɓallinGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 4 key
  • Kuna iya share layin sama da ƙasa tare daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 0 kumaGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 3 makullai

Share Memory
Don share ƙwaƙwalwar ajiya, danna maɓallin GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 4key a kan SI module.
Don tsayawa, danna maɓallinGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33 key akan SECUTEST….GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 22

Lura
Tare da aikin "Ƙaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwar Ƙaƙwalwa na Ƙaƙwalwa ) da aka shigar wanda ya ƙunshi kanun labarai da layin ƙasa, nau'in na'ura, masana'anta, samfuri da cikakkun bayanai game da abokin ciniki, aikin gyarawa da ƙididdiga suna kiyaye su. Ana iya share waɗannan bayanan kawai ta hanyar sake saiti (GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 13).

Yadda ake Nunawa da Ajiye Rahotanni

Lura
Adana sakamakon aminci da gwaje-gwajen aiki gami da shigar su cikin rahotanni da ƙididdiga yana yiwuwa ne kawai bayan an yi gwaje-gwaje.
Banda: Maɓallin aikin yana cikin matsayi na "MENUE" (tsofaffin sigogi: kuma "FUNCTION-TEST"). A cikin wannan matsayi ne kawai za a iya adana sakamakon gwajin aikin ƙarshe.
Kuna iya loda sakamakon gwajin ƙarshe a cikin tsarin SI kuma ku adana shi a can ƙarƙashin lambar Ident. Ana iya buga rahoton gwajin ƙarshe sau da yawa.
Sakamakon cikakken ranar aiki (kimanin rahotanni 300) ana iya adana shi a cikin ƙwaƙwalwar ajiyar SI. Danna maɓallinGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 6 maɓalli sau da yawa yana yin rikodin bayanai iri ɗaya don sake rubutawa akai-akai.

Rahoton gwajin ta atomatik yana ƙunshe da sakamakon gwajin da suka haɗa da ƙididdigewa da ƙididdige ƙididdigewa da kuma bayanai akan duban gani. Ƙarin takamaiman bayani game da na'urar da ke ƙarƙashin gwaji, abokin ciniki da gyara za a iya haɗa su a cikin rahoton gwaji ta hanyar shigarwa ta maballin madannai ko mai karanta lambar lamba (duba babi na 7, shafi na 20).
Ana gabatar da rahoton akan LCD a cikin tagogi da yawa.

Yadda ake Nuna Rahotanni, Shigar da Ajiye Rubutu

  • Nemi menu na SI ta hanyarGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 9 key
  • Zaɓi Protocol kuma tabbatar daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33
    Na farko, an nuna sakamakon gwajin gami da ƙididdige ƙididdiga da ƙima. Nunin ya ƙunshi bayanan da ake samu kawai.

A cikin ƙarin windows waɗanda za a iya zaɓa tare daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 0 kumaGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 3 maɓallai, za ku iya nuna bayanai kan duban gani da kuma shigar da rubutu ta maballin madannai, da kuma lambobi ta hanyar mai karanta lambar (duba babi na 7, shafi na 20). Ana iya shigar da iyakar haruffa 24 cikin layi ɗaya.GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 23

Ƙare shigar da rubutu na layi ta latsa maɓallinGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 4 key. A lokaci guda, wannan yana kawo ku zuwa layi na gaba.

  • Don adanawa, danna maɓallinGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 6 key.
    GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33yana mayar da ku zuwa menu na SI.
    Lokacin adana rahoton, lambar shaida ta jere tana fitowa tsakanin kwanan wata da lokaci.GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 24

Sakamakon gwajin aikinGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 25

Hoto a hagu:
Bayani na DUT
max. 24 hali. kowanne

Hoto a dama:
Bayani akan abokin ciniki
max. 24 hali. kowanneGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 26

Bayani kan misali gyara max. Lines 10 na max.
haruffa 24 kowanneGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 27

Idan babu bayanai a cikin kayan gwajin lokacin da ake kira Protocol abun menu, saƙon yana bayyana:GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 28

Adana Rahoton atomatik
Ana keɓance duk sakamakon gwaji ta atomatik lambar shaida a jere* idan har aikin Autostore yana aiki. Bayan gwajin aminci da kuma bayan gwajin aikin, ana nuna bayanin kula da ke nuna cewa ana adana bayanan gwajin.
Lokacin da aka kashe tsarin SI, ci gaba kamar haka don kunna aikin Autostore a cikin kayan gwaji:

  • SECUTEST… kayan aikin gwaji:
    Zaɓi gwajin da ake so a aikin mai zaɓin kayan aikin gwaji.
  • tsofaffin sigogin SECUTEST 0701/0702S:
    Saita sauya mai zaɓin aikin kayan aikin gwaji zuwa matsayin MENUE.
  • Matsar da siginan kwamfuta zuwa Saita¼ kuma tabbatar da shi GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33.
  • Matsar da siginan kwamfuta zuwa Sanya¼ kuma tabbatar da GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33.
  • Matsar da siginan kwamfuta zuwa Autostore: kunna ko kashe aikin tare da GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33.

* Ya ƙunshi max. lambobi 24. Ƙididdigar tana farawa da lambobi huɗu na farko a kowace harka, farawa da 0000.

Ma'ajiyar Rahoto Mai Sauri

Idan za a yi ma'auni da yawa a jere kuma za a kimanta sakamakon daga baya, aikin "Ajiye rahoton gaggawa" yana gabatar da kansa. Ana iya yin wannan aikin bayan gwaji (gwajin aminci da/ko gwajin aiki).

  • Kunna SI module tare da GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 6.
    Wannan yana kawo ku kai tsaye zuwa filin shigar don lambar shaida. Anan zaka iya shigar da iyakar lambobi 24 kuma tabbatar daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 4
  • Don adanawa, danna maɓallinGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 6 maɓalli sau ɗaya kuma.
    Ana adana rahoton a cikin tushen bayanai na tsarin SI tare da duk bayanan da ake samu. An yi watsi da filayen bayanan da ba komai. A lokaci guda za ku koma yanayin aunawa don fara auna na gaba nan da nan.GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 29

Lura
Idan sake saiti da bazata bayan gwajin, misali ta hanyar canza matsayin canjin aikin ko cire kebul na dubawa, dole ne a sake shigar da lambar shaidar a cikin rahoton. Ana adana bayanan.

Neman Rahotannin da Aka Ajiye
Ana iya buƙatar lissafin duk rahotannin da aka adana a kowane lokaci don nunawa da buga abubuwan da ke cikin rahoton mutum ɗaya a wani kwanan wata. Rukunin farko ya ƙunshi lambobi a jere, na biyu kuma lambobin shaida. Haruffa 14 na farko na lambar shaida ana nuna su azaman matsakaicin.

  • Zaɓi Protocol kuma tabbatar da GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33.
  • Danna maɓallin taimako i akan SECUTEST….
    Jerin rahotannin da aka adana ya bayyana.
  • Zaɓi rahoton da ake so ta amfani daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 0 kumaGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 40 keys kuma tabbatar da GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33.GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 30

Matsakaicin rahotanni 10 da aka adana an nuna. Ana zaɓar rahotanni guda 10 na gaba ta hanyar lilo tare da siginan kwamfuta.
A cikin gabatar da rahoton da aka ajiye, anGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 31 a gefen dama na layin farko yana sanar da ku cewa an adana bayanan da aka auna a ƙarƙashin lamba a jere kuma saboda haka ba za a iya shigar da ƙarin bayanai ba.

Kididdiga

Gabaɗaya, ana iya rikodin bayanan ƙididdiga na matsakaicin azuzuwan kayan aiki takwas. Bayanan ƙididdiga sun haɗa da adadin kurakuran da suka faru da kuma kashinsutage na jimlar ma'auni a cikin aji ɗaya. Menu na ƙididdiga yana bayyana muddin an zaɓi ƙididdiga a cikin babban menu, duba babi na 3.2, shafi na 9.GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 32

Farawa don Rikodin Kididdigar
Inda za a yi rikodin bayanan ƙididdiga, dole ne a ayyana sunan aji mai alaƙa kafin aunawa ta zaɓin Aji. Idan an riga an shigar da sunan aji, dole ne a kunna shi.

  • Matsar da siginan kwamfuta zuwa Class kuma GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33, menu na saiti yana nunawa.
  • Matsar da siginan kwamfuta zuwa sunan aji daban kuma GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33, layin layi yana bayyana a ƙarshen rubutun.
  • Idan kana son wani sunan aji: share haruffan da ke da , ko kammala layi tare da GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 10kuma shigar da iyakar haruffa takwas ta maballin haruffan haruffa.
  • Tabbatar da GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33, siginan kwamfuta yana motsawa zuwa ginshiƙin kuskure.
  • Ƙaddara daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 40 orGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 0 ko na farko ko duka kurakurai ne kawai za a yi la'akari. Tabbatar da GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33. Alamar walƙiya tana bayyana a bayan sunan aji da aka kunna.
  • Maimaita Komawa har sai SI LCD ta daina bayyana.

Ana iya yin gwaje-gwajen aminci da gwaje-gwajen ayyuka don ajin da aka zaɓa.
Bayan fara rikodin rahoton, saitin Farko ko Duka a cikin menu na ƙididdiga ba za a iya canza shi ba.
Bayan kowane cikakken ma'auni, ƙaddamar da gwajin aminci da gwajin aiki, dole ne a adana bayanan da aka auna ta yadda za su kasance don auna ƙididdiga. Dubi "Yadda ake Nunawa da Ajiye Rahoton" a shafi na 12. Idan, bayan aunawa, Na farko ko Duk yana biye da waniGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33 alama, an adana bayanan ƙididdiga don aji daban-daban.
Duk ma'auni masu biyowa suna faɗaɗa ƙididdiga na ajin da aka kunna a lokacin ta ƙarin sakamakon da aka auna. Idan ana son yin rikodin sabbin bayanan ƙididdiga don wani aji na yanzu, ana iya share bayanan da aka adana, duba babi. 6.3 Share Bayanan Ƙididdiga.

View Bayanan Kididdiga
Zaɓi menu na Statistics don buƙatar bayanan ƙididdiga:

  • Tare daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 40 orGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 0 matsar da siginan kwamfuta zuwa Nuna kuma tabbatar da , View menu yana nunawa.
  • Zaɓi ajin bayanan ƙididdiga waɗanda kuke son gani, tabbatar da . An jera bayanan kididdiga na ajin da aka zaba.
    Haka kuma, a cikin wannan yanayin za ka iya lilo ta hanyar statistics bayanai na duk azuzuwan tare daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 40 orGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 0 makullai.GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 34GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 35

Share Bayanan Ƙididdiga

  • Tare daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 40 orGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 0 , matsar da siginan kwamfuta zuwa Share kuma latsa GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 33.
  • Zaɓi ajin bayanan da za a goge
    or
  • Zaɓi Share: duk don share bayanan kididdiga da aka adana na duk azuzuwan!GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 36

Bayan an share duk azuzuwan, aji A yana aiki kuma an saita nau'in kuskuren kowane aji zuwa Farko.

Aiki tare da Barcode Reader

Mai karanta lambar barcode Z720A ko Z502F (a matsayin na'ura) yana ba da damar duk bayanan da ake samu a cikin sigar lambar sirri don zama cikin sauri, cikin sauƙi da aminci cikin rahotannin gwaji. Irin wannan shigar da bayanai yana ba da izinin adana lokaci da ƙarancin kuɗi na bayanai masu yawa, misali don jerin ma'auni na na'urorin da aka samar tare da lambar sirri.

Haɗa Barcode Reader

  • Haɗa mai karatu zuwa RS232 dubawa na SI module.
    Dole ne taga SI LCD ta kasance mai aiki!
    Mai karanta lambar barcode yana tabbatar da haɗin kai daidai tare da siginar sauti sau biyu.

Yana saita Barcode Reader
An saita mai karanta lambar barcode Z720A ko Z502F don lambobin barcode masu zuwa: CODE 39 / CODE 128 / EAN13 (lambobi 12) *
Mai karanta lambar barcode yana shirye don aiki nan da nan lokacin da aka haɗa shi da kayan gwajin SECUTEST… ko SECUTEST SI+.
Don aiki tare da PROFITEST 204, dole ne a saita mai karanta lambar barcode tare da lambar da aka nuna a cikin umarnin aiki na adaftar mai karanta lambar. Don waɗannan kayan gwajin, Code 128 kawai zai yiwu.
Idan kuna son amfani da wasu lambobi don SECUTEST…, da fatan za a tuntuɓi Hotline na Tallafin Samfur, duba babi na 13, shafi na 26
* Z720A ko Z502F suna da faɗin binciken da ya dace don tsarawa zuwa lambar lambar EAN 128.

Musayar bayanai tare da PC

Isar da bayanai zuwa PC yana yiwuwa ne kawai lokacin da tsarin SI ya haɗa da kayan aikin gwaji, wanda, bi da bi yana haɗa zuwa manyan hanyoyin sadarwa.

  • Haɗa PC zuwa soket ɗin haɗin RS232 na module SI ta hanyar kebul na dubawa.

Saƙon kuskure

Saƙo lokacin daGOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 6 an danna maɓalli kodayake babu ƙwaƙwalwar ajiya kyauta.GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 37

Bayanan Fasaha

Abubuwan haɗin kai

  • Fasteners akan kayan gwaji 2 knurled sukurori don ɗaure a cikin murfi na kayan gwaji; watsa bayanai da aka auna da kuma samar da wutar lantarki ta hanyar kebul na ribbon da mai haɗin D-SUB mai 9-pin, don haɗawa zuwa ƙirar RS232 na kayan gwajin.
  • Hanyoyin sadarwa RS232, bidirectional, 9-pin D-SUB soket, misali don haɗi zuwa PC ko mai karanta lambar barcode, ko RFID Scanner.
    USB, 4 fil USB1.1 nau'in B, don haɗi zuwa PC
    (kawai don watsa bayanan da aka auna)

Ƙwaƙwalwar Data

  • RAM (bayanai) 100 kbytes
  • Agogo na ainihi tare da batirin kwanan wata mai goyan bayan tantanin halitta na lithium

Bayanan Bayani na RS232

  • Rubuta RS232, serial, da DIN 19241
  • Ƙa'idar aikitage 6.5V … 12V don haɗi don gwada kayan aikin
  • Amfani na yanzu 40mA na yau da kullun
  • Baud darajar 9600 bauds
  • Bambanci babu
  • Data bits 8
  • Tsaida bit 1

Lura
Za a iya sauke cikakken bayanin ƙa'idar ƙa'idar aiki daga mu website www.gossenmetrawatt.com.

Mai haɗin D-SUB mai 9-pin don haɗin tsarin SI zuwa SECUTEST 0701S mai gwadawa yana da aikin fil mai zuwa:GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 38

  1. Kunna ikon nesa "Plus"
  2. RXD
  3. TXD
  4. NC
  5. GASA
  6. Kunna ɓangarorin nesa. "KASA"
  7. NC
  8. NC
  9. +9 V

Socket ɗin haɗin D-SUB mai 9-pin don haɗi zuwa PC, mai karanta lambar barcode, da sauransu, yana da aikin fil mai zuwa:GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 39

  1. NC
  2. TXD
  3. RXD
  4. Canza shigarwar
  5. GASA
  6. +5 V
  7. CTS
  8. RTS
  9. NC

USB Interface

  • Nau'in USB 1.1
  • Ƙa'idar aikitage 5V DC 10% daga RS232 dubawa na kayan gwajin
  • Amfani na yanzu 40mA na yau da kullun
  • Baud darajar 9600 bauds
  • Bambanci babu
  • Data bits 8
  • Tsaida bit 1
  • Wurin aiki na ƙarshe Nau'in B 4 fil, 1: VCC, 2: D–, 3: D+, 4: GND

Yanayin Nuna

  • Ƙa'idar aikitage don haɗi don gwada kayan aikin 9 V + 0.5 V DC ko 8 V + 0.5 V da aka gyara
  • Yanayin zafin jiki +23 C +2 K
  • Dangi zafi 40 … 60 %

Yanayin yanayi

  • Yanayin aiki 0 C ... +40 C
  • Ma'ajiyar zafin jiki -20 C ... +60 C
  • Humidity max. 75% RH; babu magudanar ruwa

Daidaitawar Electromagnetic (EMC)

  • Tsangwama TS EN 61326-1: 2013 aji B
  • Kariyar tsoma baki EN 61326-1: 2013

Tsarin Injini

  • Nau'in kariyar IP 20 don gidaje
  • Girma 240 mm x 81 mm x 40 mm (ba tare da knurled sukurori da ribbon na USB)
  • Nauyi kusan 0.4 kg

Kulawa

Yadda ake Sake saita Module SI
Idan tsarin SI ɗin ya daina amsawa, misali saboda aikin da ba daidai ba, dole ne a fara shi:

  • Jawo filogin layi na kayan gwajin kuma sake kunna shi. Ana adana bayanan da aka adana
    or
  • Idan za a share bayanan da aka adana a lokaci guda:
    Zaɓi Menu na Saita sannan kuma abin menu Share ƙwaƙwalwar ajiya.
    Latsa GOSSEN-METRAWATT-SECUTEST-SI+-Memory-Da-Input-Module-fig 13 lokaci guda.
    Bincika lokacin saiti bayan sake saiti!

Gidaje
Ba a buƙatar kulawa ta musamman don gidaje. Tsaftace saman saman waje. Yi amfani da dan kadan dampzane mai laushi don tsaftacewa. Kauce wa yin amfani da abubuwan tsaftacewa, abrasives ko kaushi.

Dawowar Na'ura da Zubar da Haɗin Muhalli

Kayan aiki shine samfurin nau'in 9 (na'urar kulawa da kulawa) daidai da ElektroG (Dokar Na'urar Lantarki da Lantarki ta Jamus). Wannan na'urar tana ƙarƙashin umarnin WEEE. Mun gano na'urorin lantarki da na lantarki daidai da WEEE 2012/19/EU da ElektroG tare da alamar da aka nuna zuwa dama ta DIN EN 50419. Wadannan na'urori na iya zama ba za a zubar da sharar ba. Da fatan za a tuntuɓi sashin sabis ɗin mu game da dawowar tsoffin na'urori, adreshi duba babi na 12. XNUMX. Idan ka yi amfani da batura ko batura masu caji a cikin kayan aikinka ko na'urorin haɗi waɗanda ba sa aiki yadda ya kamata, dole ne a zubar dasu daidai da ƙa'idodin ƙasa. Batura ko batura masu caji na iya ƙunsar abubuwa masu cutarwa ko ƙarfe mai nauyi kamar gubar (PB), cadmium (CD) ko mercury (Hg).
Alamar da aka nuna zuwa dama tana nuna cewa batura ko batura masu caji ba za a iya zubar dasu tare da sharar ba, amma dole ne a kai su zuwa wuraren tarawa da aka tanada musamman don wannan dalili.

Sabis na Gyara da Sauyawa

Lokacin da kuke buƙatar sabis, tuntuɓi:
Sabis na GMC-I GmbH
Cibiyar Sabis
Beuthener Straße 41
90471 Nürnberg • Jamus
Waya + 49 911 817718-0
Fax + 49 911 817718-253
Imel service@gossenmetrawatt.com
www.gmci-service.com

Wannan adireshin yana aiki a Jamus kawai. Da fatan za a tuntuɓi wakilanmu ko rassanmu don sabis a wasu ƙasashe.

Tallafin samfur

Lokacin da kuke buƙatar tallafi, tuntuɓi:
Gossen Metrawatt GmbH
Layin Tallafin Samfura
Waya + 49 911 8602-0
Fax + 49 911 8602-709
Imel support@gossenmetrawatt.com

Gossen Metrawatt GmbH
Gyara a Jamus • Batun canzawa ba tare da sanarwa ba / Kurakurai ban da • Akwai sigar PDF akan Intanet
Duk alamun kasuwanci, alamun kasuwanci masu rijista, tambura, sunayen samfur, da sunayen kamfani mallakin masu su ne.

Waya + 49 911 8602-0
Fax + 49 911 8602-669
Imel info@gossenmetrawatt.com
www.gossenmetrawatt.com

Takardu / Albarkatu

GOSSEN METRAWATT SECUTEST SI+ Memory And Input Module [pdf] Jagoran Jagora
SECUTEST SI Ƙwaƙwalwar Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa na SI, Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaddamarwa )

Magana

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *