AMADIVAYISI OMSINDO CL-16 Ukulawula Fader Ewumugqa Wokuqopha Imiksi

Iphaneli Views

PHEZULU 

1. U-PENY & GILES FADERS
   Ilungisa amaleveli e-fader eziteshini 1-16. -Inf ukuya +16 dB ububanzi befader. Izinzuzo ze-Fader ziboniswa ku-LCD.
2. Izinguquko ze-PFL/SEL TOGGLE
   Ihambisa i-toggle kwesokunxele, i-PFL iqondisa isiteshi esikhethiwe noma ibhasi lilodwa uma likuModi Yebhasi. Ukuhambisa i-toggle kwesokudla ukhetha imodi yokusetha yesiteshi (eyaziwa nangokuthi isiteshi se-FAT) noma ukhetha ukuthumela ibhasi kumodi yamafader uma ukuModi Yebhasi.
3.  NQA/THULISA AMAPHOSTHI W/INDANDATHO LEDS
   Zungezisa ukuze ulungise inzuzo yokunquma kokungu-1-16 kwesiteshi. Izinzuzo zokunquma ziboniswa ku-LCD.
   Cindezela ngenkathi ubambe u-Menu ukuze uthulise/ususe ukuthula amashaneli 1-16. Ama-LED ayindandatho azungezile anikeza inkomba ebonakalayo yeleveli yesiginali yesiteshi, i-PFL, isimungulu, nesimo sengalo.
   1. Ukuqina okuguquguqukayo okuluhlaza, okuphuzi/okuwolintshi, nokubomvu ngeleveli yesiginali, umsebenzi womkhawulo wangaphambi/othunyelwe kanye nokunamathisela ngokulandelana.
   2. Okuphuzi okubenyezelayo = isiteshi PFL'd.
   3. Okuluhlaza okwesibhakabhaka = isiteshi sithulisiwe
   4. Okubomvu = isiteshi sihlomile.
4. PHAKATHI AMAKHONDO EMISEBENZI ENINGI AMA-LED W/INDANDATHO
   Ama-Rotary/press ama-knobs anemisebenzi eminingi kuye ngemodi ekhethiwe. Amanani nesimo kuboniswa kumugqa wesibili we-LCD. Zungezisa noma cindezela ukuze ulungise noma uguqule amapharamitha ahlukene. Ama-LED amaringi azungezile abonisa ulwazi oluhlukile lwesimo.
   5. AMAKHONDO EMININGI EMIGQWENI EPHEZULU W/INDANDATHO AMA-LED.
   Ama-knobs ajikelezayo/cindezela anamakhono amaningi kuye ngemodi ekhethiwe. Amanani nesimo kuboniswa kumugqa ophezulu we-LCD. Zungezisa noma cindezela ukuze ulungise noma uguqule amapharamitha ahlukene. Ama-LED amaringi azungezile abonisa ulwazi oluhlukile lwesimo.
5. INKONZO YOKUMmisa
   Imisa ukurekhoda noma ukudlala. Ukucindezela okuthi Misa ngenkathi umisa amaswishi okubonisa igama lokuthatha elilandelayo ku-LCD ukuze lihlelwe ngezinkinobho zeSigcawu, Thatha, Amanothi.
6. INKINOBHO YOKUREKHODA
   Iqala ukurekhoda okusha.
   Ikhanyisa ngokubomvu uma uqopha.
7. Izinkinobho zemodi
   Ikhetha izindlela ezihlukahlukene ukuze inqume ukuthi yimaphi amamitha nolunye ulwazi oluboniswa ku-LCD kanye nomsebenzi wamafindo emisebenzi eminingi yomugqa ophezulu naphakathi kanye namaswishi okuguqula e-PFL/Sel.
8. Izinkinobho ze-METADATA
   Izinkinobho ezinqamulelayo zokuhlela ngokushesha imethadatha. Hlela Isigcawu, Thatha kanye Namanothi ngokuthatha kwamanje noma okulandelayo. Nyusa igama lesigcawu, zungelezela ukuthatha noma susa okurekhodiwe kokugcina (Ukuthatha okungamanga).
9. IZINKINOBHO EZINIKEZELWA UMSEBENZISI
   I-mappable yomsebenzisi emisebenzini ehlukahlukene ukuze ufinyelele ngokushesha
   Imisebenzi efakwe kumephu iboniswa ngenhla ku-LCD.
10. IZINKONZO ZOKUBUYISA
    Izinkinobho ezinikelwe zokuqapha ukubuyisela okuhlukahlukene kuma-headphone
11. COM THUMELA IZINKONZO
    Cindezela ukuze ukhulume. Iqondisa imakrofoni yesilayidi ekhethiwe iye ezindaweni ezilungiselelwe kumamenyu we-Com Send Routing.
12. INKONZO YEMETHA
    Cindezela ukuze ubuyele ku-LCD yasekhaya emisiwe view kanye nokusetha ngaphambilini kwe-HP. Futhi iphinda ukusebenza kwenkinobho Yemitha kuphaneli yangaphambili ye-8-Series.
13. IMENU BUTTON
    Iphinda imisebenzi eyabelwe inkinobho yeMenu kuphaneli yangaphambili ye-8-Series. Bamba bese ucindezela ibhodwe lokusika leziteshi ukuze uthulise leso siteshi. Futhi isetshenziselwa ukuthulisa amabhasi nokuphumayo ngezindlela ezifanele
14. SHINTSHA IZISHINTSHI
    Iphinda imisebenzi eyabelwe amaswishi amathathu okuguqula ngaphansi kwephaneli yangaphambili ye-LCD ye-8-Series.
15. INKUNDLA YE-HEADPHONE
    Iphinda imisebenzi ye-headphone knob kuphaneli yangaphambili ye-LCD ye-8-Series.
16. Ku-Scorpio, bamba ngenkathi ucindezela inkinobho ye-Com Rtn ukuze uvule/uvale ukuqapha kwe-Com Rtn 2 kuma-headphone. Cindezela uma isiteshi noma ibhasi lizihlalele lodwa ukuze uguqulele ekusethweni kwangaphambili kwe-headphone yamanje. Bamba ngesikhathi sokudlala ukuze ufake imodi yokukhuhla umsindo.
17. KHETHA INQUBO
    Iphinda imisebenzi yenkinobho ethi Khetha kuphaneli yangaphambili ye-LCD ye-8-Series.
18. I-LCD ESONGWA PHANSI EFUNDA UKUKHANYA KWELANGA
    Ukuboniswa kombala okhanyayo wokulinganisa, amapharamitha, izindlela, ezokuthutha, ikhodi yesikhathi, imethadatha nokuningi.
    Ukugqama kwe-LCD kusethwe ku-Menu>Controllers>CL-16>LCD Brightness menu.

Iphaneli Views

PHANSI

Iphaneli Views

EMUVA

PHAMBILI

I-LCD BONISA

1. INCAZELO YEKNOB YOMUGQA OPHEZULU
   Ichaza umsebenzi wamafindo okulawula amarowu aphezulu anemisebenzi eminingi. Umsebenzi uyashintsha kuye ngemodi ekhethiwe.
2. INCAZELO YEKNOBU YOmugqa OPHAKATHI
   Ichaza umsebenzi wamafindo okulawula amarowu amaphakathi anemisebenzi eminingi. Umsebenzi uyashintsha kuye ngemodi ekhethiwe.
3. PHAKATHI NEZINSIMU ZOMUGQA
   Ibonisa idatha efanelekile yesiteshi ngasinye noma ibhasi kuye ngokuthi yimaphi amapharamitha alungiswayo kusetshenziswa amafindo omugqa omaphakathi njengePan, Delay, HPF, EQ, Ch 17-32, Ukuzuza Kwebhasi, Umzila Webhasi, Ukuthumela Ibhasi, Amapharamitha Esiteshi se-FAT nokunye.
4. IZINKINGA EZINGAPHEZULU
   Ibonisa idatha efanelekile yesiteshi ngasinye, ibhasi, noma okukhiphayo kuye ngokuthi yimaphi amapharamitha alungiswayo kusetshenziswa amafindo emigqa ephezulu njengenzuzo Yokukhipha, i-HPF, i-EQ, Inzuzo Yebhasi, Umzila Webhasi, Ukuthumela Ibhasi, Amapharamitha Esiteshi Se-FAT nokunye.
5. INDAWO YOLWAZI OMKHULU
   Ibonisa ulwazi oluhlukahlukene oluhlanganisa ukulinganisa kwe-LR, izibali zesikhathi, imethadatha, nokuningi. Umbala wangemuva uyashintsha kuye ngesimo sokuthutha ngale ndlela elandelayo:
   • Ingemuva elibomvu = ukuqopha
   • Ingemuva elimnyama = limile
   • Ingemuva eliluhlaza = ukudlala
   • Ingemuva eliluhlaza elicwebezelayo = ukudlalwa kumisiwe okwesikhashana
   • Ingemuva eliluhlaza = FFWD noma REW
6. AMAMITHA E-LR OMKHULU
   Ibonisa amamitha wemiksi yebhasi eyinhloko ye-LR kanye nesimo sengalo yokurekhoda.
7. THATHA IGAMA
   Bonisa futhi uhlele i-Thatha Igama lamanje. Cindezela okuthi Misa ngenkathi umile ukuze ubonise igama lokuthatha elilandelayo.
8. ISIGCAWU
   Bonisa futhi uhlele igama leSigcawu samanje. Cindezela okuthi Misa ngenkathi umile ukuze ubonise igama lesigcawu elilandelayo.
9. THATHA INOMBOLO
   Bonisa futhi uhlele inombolo yamanje ethi Thatha. Cindezela okuthi Misa ngenkathi umile ukuze ubonise inombolo ethi Thatha elandelayo.
10. AMANOTHI
    Bonisa futhi uhlele inombolo yamanothi amanje. Cindezela okuthi Misa ngenkathi umile ukuze ubonise amanothi alandelayo okuthi Thatha.
11. IZINKINOBHO ZOKUSEBENZA 1-5 IZINCAZELO
    Ibonisa amagama ezinqamuleli ezifakwe kumephu ezinkinobho ze-U1 - U5.
12. TIMECODE COUNTER
    Ibonisa ikhodi yesikhathi yamanje phakathi nokurekhoda nokuma kanye nekhodi yesikhathi yokudlala phakathi nokudlala.
13. ISIKHATHI ESIQINISEKILE ESISELE
    Ibonisa ukuthatha isikhathi esidlulile ngesikhathi sokurekhoda nokudlala. Ngesikhathi sokudlala, isikhathi esisele sokuthatha siboniswa ngemva kwe-'/'.
14. UKUKALWA KWE FULEMU
    Ibonisa izinga lozimele lekhodi yesikhathi samanje.
15. I-HP PRESET
    Ibonisa umthombo we-HP okhethiwe njengamanje kanye nevolumu ye-HP uma ilungiswa nge-knob ye-HP.
16. SYNC/SAMPISilinganiso
    Ibonisa umthombo wamanje wokuvumelanisa kanye ne-sampisilinganiso.
17.  BUYISA AMAmitha
    Ibonisa ukulinganisa kwawo womabili amashaneli wesignali ngayinye yokubuya.
18. ISITESHI NOMA IZINKINGA ZAMAGAMA EBHASI
    Ibonisa igama lesiteshi, ukusika, kanye nezinzuzo ze-fader uma viewamamitha wesiteshi. Ibonisa inombolo yebhasi kanye nenzuzo yebhasi lapho viewamamitha webhasi. Lezi zinkambu zishintsha umbala wazo ngale ndlela elandelayo:
    • Ingemuva elimnyama/umbhalo ompunga = isiteshi sivaliwe noma akukho mthombo okhethiwe.
    • Ingemuva elimpunga/umbhalo omhlophe = isiteshi/ibhasi livuliwe futhi likhishiwe izikhali.
    • Ingemuva elibomvu/umbhalo omhlophe = isiteshi/ibhasi livuliwe futhi lihlomile.
    • Ingemuva eliluhlaza/umbhalo omhlophe = isiteshi/ibhasi lithulisiwe.
19. IZITESHI EZxhumene
    Izinkambu zolwazi lwesiteshi ziyahlanganiswa uma iziteshi zixhunywa.
20. ISITESHI NOMA AMAmitha WEBHASI
    Ibonisa ukulinganisa kwesiteshi noma kwebhasi kuye ngemodi ekhethiwe.
21. UMBALA ONGAWUWENZIWA CH. IZIKHOMBISI ZAMAQEMBU
    Amashaneli anenkomba yombala ofanayo ahlanganisiwe. Khetha ukuthi imuphi umbala osebenza eqenjini ku-CL-16>Imenyu Yombala Weqembu.
22. I-METER VIEW NAME
    • Ibonisa '1-16' uma viewIsiteshi esingu-1-16 amamitha
    • Ibonisa '17-32' uma viewIsiteshi esingu-17-32 amamitha
    • Ibonisa igama lesiteshi nini viewngesiteshi se-FAT
    • Ibonisa 'Amabhasi' uma viewAmamitha webhasi
    • Ibonisa Inombolo Yebhasi uma viewngemodi yokuthumela ebhasini
23. INDAWO YOLWAZI LOKUSHAYELA/YAMANDLA
    • Ibonisa i-SSD, i-SD1, ne-SD2 isikhathi esisele sokurekhoda.
    • Ibonisa impilo yomthombo wamandla we-8-Series kanye ne-CL-16 kanye nevolumutage.

Ixhumeka Ku-8-Series-Mix-Recorder Yakho
Qala ngakho kokubili i-CL-16 kanye nerekhoda yakho ye-8-Series mixer-powered down.

1. Usebenzisa ikhebuli ye-USB-A eya ku-USB-B, xhuma imbobo ye-USB-A ye-8-Series embobeni ye-CL-16 USB-B.
2. Xhuma ijekhi ye-headphone ye-8-Series' 1/4” TRS kujekhi we-CL-16's 1/4” TRS “To 8-Series Headphone Out” usebenzisa ikhebuli ehlinzekiwe.
3. Xhuma umthombo wamandla ongu-10-18 V DC usebenzisa i-4-pin XLR (F) kokokufaka kwe-DC kwe-CL-16. Umthombo wamandla awufakiwe.
4. Amandla ku-8-Series Mixer-Rekhoda. Bheka kumhlahlandlela ofanele we-8-Series ukuze uthole yonke imiyalelo yokusebenza nemininingwane.

Ivula/Vala amandla 

1. Amandla ku-8-Series Mixer-Rekhoda. Uma i-8-Series isinamandla, izoqala ngokuzenzakalelayo i-CL-16.
2. Ukuze ucime, vele upheyiphe inkinobho yokuguqula amandla angu-8-Series uye endaweni yokucisha. I-CL-16 nayo izophela amandla.

Ikhipha i-CL-16 ku-8-Series
I-CL-16 ingaxhunywa/ingaxhunywa ku-8-Series kuyilapho ivuliwe ngaphandle kokulimala kunoma iyiphi iyunithi. Uma i-CL-16 inqanyuliwe, i-“Control Surface Unplugged” iboniswa ku-LCD ye-8-Series. Awekho amaleveli azoshintsha. Okwamanje:
Lindela izinguquko ezingazelelwe zeleveli uma Izilawuli>I-Soft Fader/I-trim Pickup inganikwa amandla njengoba amaleveli omsindo manje azonqunywa ama-trim nama-fader ku-8-Series.
or
Xhuma kabusha i-CL-16. Awekho amaleveli azoshintsha ngaphandle kokuthi KULUNGILE kukhethiwe.

Ibuyekeza i-CL-16 Firmware
Uma kudingekile, i-firmware ye-CL-16 ibuyekezwa ngokuzenzakalelayo lapho kubuyekezwa i-firmware ye-8-Series. Isibuyekezo se-firmware se-8-Series PRG file iqukethe idatha yokubuyekeza kokubili i-8-Series kanye ne-CL-16.
Xhuma i-CL-16 ku-8-Series futhi uqinisekise ukuthi zombili zixhunywe emithonjeni yamandla ethembekile. Buyekeza i-firmware ye-8-Series usebenzisa inqubo evamile. Uma kukhona isibuyekezo se-firmware se-CL-16 esitholakalayo, sizoqala ngokuzenzakalelayo ngemva kokuba i-8-Series isiqede inqubo yayo yokubuyekeza. Inkinobho yokumisa ye-CL-16 izokhanya ngokuphuzi ngenkathi i-CL-16 ibuyekeza. Uma isibuyekezo se-CL-16 sesiqediwe, i-combo ye-8-Series/CL-16 izovula futhi ilungele ukusetshenziswa.

Ukusebenza Kuphelileview
I-CL-16 ihlanganisa ipharadigm yomugqa wesiteshi ovamile wokuhlanganisa namandla wemisebenzi eminingi wemiksi yesimanje yedijithali. Uma usujwayelane nezilawuli ezahlukahlukene, izindlela ezihlukene namamitha ahambisana nazo views, amandla amakhulu engxube/rekhoda yakho ye-8-Series azobonakala. Yonke imisebenzi engu-8-Series (iziteshi, amabhasi, okuphumayo, imethadatha yamamenyu, amakhomu) ingalawulwa kusukela ku-CL-16. Nakuba ulwazi oluningi luvezwa ku-CL-16 LCD, i-8-Series LCD isahlinzeka ngolwazi oluwusizo lapho yenza imisebenzi ethile isib. umzila, ukufakwa kombhalo.

I-Channel Strip
Izilawuli zamaphaneli aphezulu kanye namamitha azo e-LCD, amagama, namanani aqondaniswe 'emdwedweni' ome mpo ukuze iso likwazi ukuhamba ngokwemvelo phakathi kokulawula isiteshi nokuboniswa.

• I-CHANNEL TRIMS 1-16 Amabhodwe okusika angu-16 anikezelwe ekulungiseni inzuzo yokunquma amashaneli 1-16. Inzuzo yokunquma ayitholakali eziteshini 17-32. Zungezisa ibhodwe lokunquma ukuze ulungise inzuzo yalo futhi ubonise inani lenzuzo yalo ku-dB kumugqa ongezansi we-LCD. Sika ama-LED wendandatho yebhodwe abonisa ileveli yesiteshi (ukuqina okuguquguqukayo okuluhlaza), ukukhawulela ukuphela kwesiteshi ngaphambi/kokuthunyelwe (okuphuzi/okuwolintshi), nokunamathisela (okubomvu).
• I-CHANNEL TRIMS 17-32 Cindezela okuthi Ibhange ukuze ushintshele ku-Ch 17-32 bese uzungezisa ifindo eliphezulu ukuze ulungise ukuzuza kwayo kokunquma futhi ubonise inani layo lokuzuza ku-dB kumugqa ongezansi nangaphezulu we-LCD.
• ISITESHI SITHULISA 1-16 Cindezela ibhodwe lokunquma ngenkathi ubambe u-Menu ukuze uthulise/ususe ukuthula amashaneli 1-16. Uma ithulisiwe, i-LED yeringi yebhodwe lokunquma iba luhlaza okwesibhakabhaka.
• ISITESHI SITHULISA 17-32 Cindezela okuthi Ibhange ukuze ushintshele ku-Ch 17-32 bese ucindezela inkinobho ephakathi ngenkathi ubambe u-Menu ukuze uthulise/ususe ukuthula kumashaneli 17-32. Uma ithulisiwe, i-LED yeringi ye-middle knob iba luhlaza okwesibhakabhaka.
• IZIMPAHLA ZESITESHI 1-16 I-16 Penny kanye ne-Giles faders linear zinikezelwe ekulungiseni inzuzo ye-fader yeziteshi 1-16. Shelelezisa i-fader ukuze ulungise inzuzo yaso futhi ubonise inani lenzuzo yayo ku-dB kumugqa ongezansi we-LCD.
• I-FADERS YEsiteshi 17-32 Ukuze uhlanganise iziteshi 17-32, cindezela i-Bank ukuze ushintshele ku-Ch 17-32 bese uzungezisa inkinobho ephakathi ukuze ulungise ukuzuza kwayo futhi ubonise inani layo lokuzuza ku-dB kumugqa ongezansi naphakathi we-LCD.
• Isiteshi PFLS 1-16 Uma u-Ch 1-16 amamitha eboniswa, hambisa i-toggle kwesokunxele uye ku-1-16 yesiteshi se-PFL. Uma isiteshi 1-16 siyi-PFL'd, ihambisana ne-trim pot pot I-LED icwayiza ngokuphuzi bese i-PFL 'n' icwayiza emkhakheni wama-headphone ku-Main Info Area. Hambisa ukuguqula kwesokunxele futhi noma cindezela Meter ukuze ukhansele i-PFL futhi ubuyele ekusetheni kwangaphambili kwe-HP yamanje.
• Isiteshi PFLS 17-32 Uma u-Ch 17-32 amamitha eboniswa (ngokucindezela ibhange), hambisa ukuguqula kwesokunxele uye ku-17-32 yesiteshi se-PFL. Uma isiteshi esingu-17-32 siyi-PFL'd, sihlobene neringi ye-middle knob i-LED ecwayiza ngokuphuzi bese i-PFL 'n' icwayiza emkhakheni wama-headphone ku-Main Info Area. Hambisa ukuguqula kwesokunxele futhi noma cindezela Meter ukuze ukhansele i-PFL futhi ubuyele ekusetheni kwangaphambili kwe-HP yamanje.

Amamodi/Imitha Views

I-CL-16 inezinhlobo ezahlukene zokusebenza (ezibalwe ngezansi). Ukushintsha imodi kushintsha umsebenzi wamafindo emisebenzi eminingi futhi kwezinye izimo, kushintsha Imitha ye-LCD View. Umsebenzi kanye/noma inani lamafindo emisebenzi eminingi liboniswa Ezinkambuni ze-LCD Zerowu Ephakathi Naphezulu kanye nasezinkambu zesichazi esekhoneni lesokunxele eliphezulu.

• CH 1-16 (IMETERA YASEKHAYA ENGAMENZEKILE VIEW) Cindezela inkinobho ye-Meter ukuze ubuyele njalo kule mitha yasekhaya ezenzakalelayo view. Zungezisa ama-knobs angaphezulu ukuze ulungise izinzuzo eziphumayo; cindezela bese ubamba u-Menu bese ucindezela inkinobho engenhla ukuthulisa okukhiphayo okuhambisanayo.
• I-CH 17-32 (BANK) Cindezela inkinobho ethi Bank. Inkinobho yeBhange icwayiza ngokuluhlaza kanye nemitha view izinguquko zibe ingemuva eliluhlaza. Zungezisa ama-knobs aphakathi ukuze ulungise inzuzo ye-fader ye-Ch 17-32; cindezela ngenkathi ubambe u-Menu ukuze uthulise.
  Zungezisa amaknobho angaphezulu ukuze ulungise izinzuzo zokunquma ze-Ch 17-32.
  Ukubhanga ku-Ch17-32 kungakhutshazwa ngokuzulazulela kokuthi Controllers>CL-16>Bank Disable to On.
• I-PAN CH 1-16 Cindezela inkinobho ethi Pan uma viewnge Ch 1-16. Inkinobho ye-pan ikhanyisa ipinki. Zungezisa ama-knobs aphakathi ukuze ulungise i-ch 1-16 pan; cindezela ama-knobs ukuze ubeke i-pan emaphakathi. Indawo ye-pan iboniswa ibha eluhlaza okwesibhakabhaka evundlile.
  Zungezisa ama-knobs angaphezulu ukuze ulungise izinzuzo eziphumayo; cindezela ngenkathi ubambe imenyu ukuze uthulise okukhiphayo.
• I-PAN CH 17-32 Cindezela inkinobho ethi Pan uma viewnge Ch 17-32. Inkinobho ye-pan ikhanyisa ipinki. Zungezisa ama-knobs aphakathi ukuze ulungise i-ch 17-32 pan; cindezela ama-knobs ukuze ubeke i-pan emaphakathi. Indawo ye-pan iboniswa ibha eluhlaza okwesibhakabhaka evundlile.
  Zungezisa ama-knobs angaphezulu ukuze ulungise izinzuzo eziphumayo; ngenkathi ubambe imenyu ukuze uthulise okukhiphayo.
• Ukubambezeleka/POLARITY CH 1-16 Cindezela Inkinobho Dly. Inkinobho ye-Dly ikhanyisa okuluhlaza okwesibhakabhaka ngokukhanyayo. Zungezisa ama-knobs aphakathi ukuze ulungise ukubambezeleka kuka-ch 1-16; cindezela ama-knobs ukuze uguqule i-polarity. Zungezisa ama-knobs angaphezulu ukuze ulungise izinzuzo eziphumayo; cindezela ngenkathi ubambe imenyu ukuze uthulise okukhiphayo.
  I-ARM Cindezela bese ubamba inkinobho ye-Arm (izingalo zingashintshwa kuphela uma ubambe inkinobho yengalo). Ibonisa isimo sengalo yesiteshi 1-16 kuma-LED eringi yebhodwe lokunquma kanye nesimo sengalo engu-17-32 kuyindandatho yeknob emaphakathi
  Ama-LED. Ubomvu uhlomile. Cindezela ama-knobs ukuze uguqule ingalo/unqamule. Kumodi Yamabhasi (cindezela Ibhasi), ukucindezela nokubamba Ingalo ibonisa izingalo zebhasi (Ibhasi 1, Ibhasi 2, Ibhasi L, Ibhasi R) kuma-LED eringi yeknobhu emaphakathi. Ebhasini Ithumela kumodi ye-Faders, ucindezela futhi ubambe Ingalo ikhombisa zonke izingalo:- I-Ch 1-16 izingalo kuma-LED wendandatho yebhodwe lokunquma, izingalo ze-Ch 17-32 kuma-LED endandatho yeknob emaphakathi, nezingalo zebhasi kuma-LED endandatho yeknob ephezulu.
• IMIBALA YEsiteshi Imibala yesiteshi ingasetshenziswa ukusiza ukukhomba kalula nokuhlukanisa phakathi kwemithombo yesiteshi.
  Esiteshini ngasinye 1-32, khetha umbala kokuthi Izilawuli>-
  CL-16>Imenyu yemibala yesiteshi. Umbala okhethiwe usetshenziswa ngemuva komugqa wesiteshi futhi ubhala ngaphezulu imibala emisiwe yasembonini yokumpunga koku-ch 1-16 kanye nohlaza ku-ch 17-32.
  Qaphela: Imibala yesiteshi ayivezwa ku-Bus Send On Faders view.
• AMABHASI Cindezela ukuze ubonise Ibhasi 1-10, L, amamitha angu-R kuzikrini ze-CL-16 LCD kanye ne-Bus Routing kunkinobho yebhasi ye-LCD yochungechunge oluyisi-8 ikhanyisa ebomvana ngokukhanyayo. Zungezisa amaknobho aphakathi ukuze ulungise izinzuzo eziyinhloko zeBhasi L, R, B1 – B10; hambisa i-toggle kwesokunxele uye ebhasini eyedwa; cindezela ngenkathi ubambe u-Menu ukuze uthulise. Zungezisa ama-knobs angaphezulu ukuze ulungise izinzuzo eziphumayo; cindezela ngenkathi ubambe u-Menu ukuze uthulise okukhiphayo.
• IBHASI LITHUMELA KU-FADERS CH 1-16 Cindezela inkinobho yebhasi + ukushintsha kwe-Sel. Ibhasi lihamba lodwa futhi isikrini salo somzila siboniswa ku-LCD yochungechunge oluyisi-8. Inkinobho Yebhasi icwayiza ebomvana kanye nemitha view izinguquko kungemuva eliluhlaza okwesibhakabhaka ngokukhanyayo. Cindezela amaknobho aphakathi ukuze uhambise u-Ch 1-16 oya kungaphambi kwefadi yebhasi (eluhlaza okotshani), i-postfade (iwolintshi) noma ngokuthola inzuzo (okuluhlaza okwesibhakabhaka okukhanyayo). Uma isethelwe ukuthumela inzuzo, zungezisa inkinobho ephakathi ukuze ulungise inzuzo yokuthumela. Cindezela inkinobho ethi Bank ukuze ufinyelele ukuthunyelwa kwe-ch 17-32. Zungezisa amaknobho angaphezulu ukuze ulungise izinzuzo zeBhasi ezinkulu; cindezela izinkinobho eziphezulu ukuze uthulise amabhasi.
• IBHASI LITHUMELA KU-FADERS CH 17-32 Cindezela inkinobho yebhasi + Sel toggle nini viewnge Ch 17-32. Ibhasi lihamba lodwa futhi isikrini salo somzila siboniswa ku-LCD yochungechunge oluyisi-8. Inkinobho Yebhasi icwayiza ebomvana kanye nemitha view izinguquko kungemuva eliluhlaza okwesibhakabhaka ngokukhanyayo. Cindezela ama-knobs amaphakathi ukuze uhambise u-Ch 17-32 oya kungaphambi kwefadi yebhasi (eluhlaza okotshani), i-postfade (iwolintshi) noma ngokuthumela inzuzo (okuluhlaza okwesibhakabhaka). Uma isethelwe ukuthumela inzuzo, zungezisa inkinobho ephakathi ukuze ulungise inzuzo yokuthumela. Cindezela inkinobho ethi Bank ukuze ufinyelele ukuthunyelwa kwe-Ch 1-16.
• I-HPF CH 1-16 Cindezela bese ubamba inkinobho yeBhange bese ucindezela inkinobho ethi Phenya. Zungezisa ama-knobs aphezulu ukuze ulungise i-HPF freq. Cindezela amaknobho aphakathi ukuze udlule i-HPF.
• I-EQ LF CH 1-16 Cindezela bese ubamba inkinobho yeBhange bese ucindezela Ingalo. Zungezisa ama-knobs aphezulu ukuze ulungise i-LF freq/Q. Cindezela ama-knobs aphezulu ukuze uguqule phakathi kwe-LF freq/Q. Zungezisa amaknobho aphakathi ukuze ulungise ukuzuza kwe-LF. Cindezela amaknobho aphakathi ukuze udlule u-LF. Sebenzisa i-Mic toggle ukuze ushintshe ibhendi ye-LF phakathi kwe-Valiwe/Pre/Post. Sebenzisa i-Fav toggle ukuze uguqule ibhendi ye-LF phakathi kwePeak neShelf. Lapho ulungisa amafindo e-EQ aphezulu noma amaphakathi esiteshi, ijika laso le-EQ liboniswa ku-LCD yochungechunge oluyisi-8.
• I-EQ MF CH 1-16 Cindezela bese ubamba inkinobho yasebhange bese inkinobho yeBhasi. Zungezisa ama-knobs aphezulu ukuze ulungise i-MF freq/Q. Cindezela ama-knobs aphezulu ukuze uguqule phakathi kwe-MF freq/Q. Zungezisa amaknobho aphakathi ukuze ulungise ukuzuza kwe-MF. Cindezela izinkinobho ezimaphakathi ukuze udlule i-MF. Sebenzisa i-Mic toggle ukuze ushintshe ibhendi ye-MF phakathi kwe-Valiwe/Pre/Post. Lapho ulungisa amafindo e-EQ aphezulu noma amaphakathi esiteshi, ijika laso le-EQ liboniswa ku-LCD yochungechunge oluyisi-8.
• I-EQ HF CH 1-16 Cindezela bese ubamba inkinobho ethi Bank bese inkinobho ethi Dly. Zungezisa ama-knobs aphezulu ukuze ulungise i-HF freq/Q. Cindezela ama-knobs aphezulu ukuze uguqule phakathi kwe-HF freq/Q. Zungezisa amaknobho aphakathi ukuze ulungise ukuzuza kwe-HF. Cindezela amaknobho aphakathi ukuze udlule i-HF. Sebenzisa i-Mic toggle ukuze ushintshe ibhendi ye-HF phakathi kwe-Valiwe/Pre/Post. Sebenzisa i-Fav toggle ukuze uguqule ibhendi ye-HF phakathi kwe-Peak ne-Shelf. Lapho ulungisa amafindo e-EQ aphezulu noma amaphakathi esiteshi, ijika laso le-EQ liboniswa ku-LCD yochungechunge oluyisi-8.
• CH 1-16 FAT CHANNELS Sel ukushintsha. Zungezisa futhi/noma cindezela amafindo aphezulu naphakathi ukuze ulungise amapharamitha esiteshi ahlukahlukene.
• CH 17-32 AMAFUTHA amashaneli Inkinobho yebhange + Guqula ukuthengisa. Zungezisa futhi/noma cindezela amafindo aphezulu naphakathi ukuze ulungise amapharamitha esiteshi ahlukahlukene.

ISITESHI SIKHETHA 1-32 (AMA-FAT CHANNEL) Ishaneli yamafutha igama elivame ukusetshenziswa kumakhonsoli edijithali ukuchaza imodi yokubonisa yokusetha imingcele yesiteshi esikhethiwe. Ilingana nesikrini sesiteshi ku-8-Series. Uma u-Ch 1-16 amamitha eboniswa, hambisa ukuguqula kwesokudla uye ku-'Sel' ukuze ukhethe isiteshi samafutha se-Ch 1-16. Uma u-Ch 17-32 amamitha eboniswa, hambisa ukuguqula kwesokudla uye ku-'Sel' ukuze ukhethe isiteshi samafutha se-Ch 17-32. Ukuze uphume e-Fat Channel, cindezela i-Meter noma uhambise ukushintsha kwesiteshi kwesokudla futhi. Lapho kukhethwa isiteshi samafutha:

• Imitha yesiteshi esikhethiwe ishintsha ibe ingemuva elimhlophe.
• Imitha yesiteshi esikhethiwe kanye nenombolo yesiteshi negama kuboniswa esandleni sobunxele endaweni yolwazi lweDrayivu/Amandla.
• Isiteshi esikhethiwe yi-PFL'd. Indandatho yayo ye-trim pot pot ehambisanayo icwayiza ngokuphuzi futhi i-PFL 'n' icwayiza emkhakheni wama-headphone ku-Main Info Area. Cindezela inkinobho ye-HP ukuze uguqule phakathi kwe-PFL yesiteshi kanye nokusetha ngaphambilini kwe-HP kwamanje. Lokhu kukuvumela ukuthi ugade imiksi ngisho nalapho ulungisa amapharamitha wesiteshi.
• Amaknobhu omugqa ongenhla naphakathi ashintshela kuzilawuli zepharamitha yesiteshi esikhethiwe imisebenzi yazo echazwe ezinkambini zerowu engenhla nemaphakathi kanje:

Ngaphezulu

B1 Thumela

B2 Thumela

B3 Thumela

B4 Thumela

B5 Thumela

B6 Thumela

B7 Thumela

B8 Thumela

B9 Thumela

B10 Thumela

—

I-EQ Routing

AMix

Ipani

Ibhasi L Thumela

Ibhasi R Thumela

Maphakathi

Ch Igama

Umthombo we-C

I-Dly/Polarity

Umkhawulo

I-HPF

LF Ukuzuza

I-LF Freq

LF Q

Uhlobo lwe-LF

MF Ukuzuza

I-MF Freq

MF Q

Inzuzo ye-HF

I-HF Freq

HF Q

Uhlobo lwe-HF

Umugqa OPHAKATHI (KUSUKA KWESOKUNXELE KUYA KWESOKUDLA)

• Ch Igama: Cindezela inkinobho ukuze uveze isiteshi
  Hlela ikhibhodi ebonakalayo yeGama Lesiteshi kusibonisi se-8-Series. Sebenzisa ikhibhodi ye-USB noma ama-Select Knob, HP knob, kanye namaswishi e-Toggle eduze nekhona elingezansi kwesokudla le-CL-16 ukuze uhlele igama lesiteshi (ithrekhi).
• Umthombo we-C: Cindezela inkinobho ukuze uveze isikrini somthombo wesiteshi kusibonisi se-8-Series. Bese uzungezisa inkinobho ethi Khetha ukuze ugqamise umthombo, bese ucindezela ukuze uwukhethe.
• I-Dly/Polarity (Ch 1-16 kuphela): Cindezela inkinobho ukuze uguqule i-polarity – isithonjana senkundla sishintsha sibe luhlaza uma sihlanekezelwa. Zungezisa inkinobho ukuze ulungise ukubambezeleka kwesiteshi okokufaka.
• Umkhawulo: Cindezela inkinobho ukuze uvule/uvale isikhawuli
• I-HPF (Ch 1-16 kuphela): Cindezela inkinobho ukuze uvule/uvale i-HPF. Zungezisa i-knob ukuze ulungise i-HPF 3dB roll off frequency. Uma ivuliwe, inkambu nomugqa omaphakathi neringi ye-LED izobonisa okuluhlaza okwesibhakabhaka ngokukhanyayo
• I-LF Gain, LF Freq, LF Q, LF Type (Ch 1-16 kuphela): Zungezisa amafindo ukuze ulungise amanani e-LF band EQ. Cindezela noma yimaphi amafindo angu-4 ukuze udlule/ungadlulisi ibhendi ye-LF. Uma kungadluliwe, izinkambu kanye nama-LED ayindayo yomugqa omaphakathi abonisa okuwolintshi.
• I-MF Gain, MF Freq, MF Q (Ch 1-16 kuphela): Zungezisa amafindo ukuze ulungise amanani e-MF band EQ. Cindezela noma yimaphi amafindo angu-3 ukuze udlule/ungadlulisi ibhendi ye-MF. Uma kungenakugwetshwa, izinkambu kanye nama-LED ayingingi yomugqa omaphakathi abonisa aphuzi.
• I-HF Ukuzuza, i-HF Freq, i-HF Q, Uhlobo lwe-HF (Ch 1-16 kuphela): Zungezisa amafindo ukuze ulungise amanani e-HF band EQ. Cindezela noma yimaphi ama-knobs angu-4 ukuze udlule/ungadlulisi ibhendi ye-HF. Uma kungenziwanga lutho, izinkambu kanye nama-LED ayindayo emaphakathi abonisa okuluhlaza.

Umugqa PHEZULU (KUSUKA KWESOKUNXELE KUYA KWESOKUDLA):

• B1 – B10 Thumela: Cindezela inkinobho ukuze uguqule ukuthunyelwa kwebhasi okukhethiwe phakathi kwe-Vala, i-Prefade (eluhlaza okotshani), i-Postfade (owolintshi), kanye nokuthi Thumela (okuluhlaza okwesibhakabhaka). Uma isethwe kokuthi Thumela (okuluhlaza okwesibhakabhaka okukhanyayo), zungezisa inkinobho ukuze ulungise inzuzo yokuthumela yesiteshi kulelo bhasi.
• I-EQ Routing (Ch 1-16 kuphela): Zungezisa iknobhu ukuze ukhethe ukuthi i-EQ isetshenziswa i-prefade noma i-postfade noma ivaliwe.
• I-AMix: Cindezela (Ch 1-16 kuphela) iknobhu ukuze ukhethe isiteshi se-automix. Umbhalo wenkambu ubampunga uma i-automixer ivaliwe, okunsomi kwe-Dugan kunikwe amandla futhi kuluhlaza uma i-MixAssist inikwe amandla. Ku-Ch 17-32 AMix ithathelwa indawo yinzuzo ye-Trim. Zungezisa ukuze ulungise inzuzo yokusika iziteshi ezikhethiwe.
• I-Pan: Zungezisa i-knob ukuze ulungise i-pan. Cindezela inkinobho ukuze ubeke ipani elimaphakathi
• I-BusL, i-BusR: Cindezela i-knob ukuze uhambise ku-Bus L, R , i-prefade (eluhlaza okotshani), i-postfade (iwolintshi), noma ingahanjiswanga (ivaliwe).

Uyenza kanjani i-CL-16 izizwe njengengxube ye-analog
Umucu wesiteshi we-analog mixer ngokuvamile uhlanganisa ukunquma, i-fader, i-solo, i-simuted, i-pan ne-EQ. I-CL-16 inomuzwa ofanayo ngezifanisi zayo ezizinikezele, ama-trim, ama-solo (PFLs), kanye nezithulisiwe. Ngokusetha i-CL-16 ibe yimodi ye-EQ isb. LF EQ (Hold Bank then Arm), ifindo engenhla nemaphakathi yomugqa wesiteshi inikeza ukufinyelela kulawulo lwe-EQ futhi inikeze okwengeziwe kokuzwakala komcu wesiteshi se-analog.

Imiphumela
Kuzo zonke izindlela ngaphandle kwe-Fat Channel, i-EQ kanye ne-Bus Ethumela kumamodi weFader, zungezisa ama-knobs aphezulu ukuze ulungise izinzuzo eziphumayo bese ucindezela ama-knobs aphezulu ngenkathi ubambe i-Menu ukuze uthulise okukhiphayo.

Ukulawulwa Kwezokuthutha

• IMA Cindezela ukumisa ukudlala noma ukurekhoda. Inkinobho yokumisa ikhanyisa okuphuzi uma imiswa. Ngenkathi umile, cindezela okuthi misa ukuze ubonise ukuthatha okulandelayo ku-LCD.
• IREKHODI Cindezela ukuze uqale ukurekhoda ukuthatha okusha. Inkinobho yokurekhoda kanye Nendawo Yolwazi Oluyinhloko ikhanyisa ngokubomvu lapho uqopha.
• Qaphela: Buyisela emuva, Dlala futhi izilawuli zokuthutha Eziya Phambili Phambili ngokuzenzakalelayo kuzinkinobho zomsebenzisi we-U1, U2, kanye ne-U3, ngokulandelanayo.

Izinkinobho zemodi
Bheka Amamodi/Imitha Views ngenhla ukuze uthole ulwazi olwengeziwe.

• I-PAN/HPF Cindezela i-pan ukuze ushintshe ama-knobs aphakathi nezilawuli ze-pan. Ngenkathi ubambe iBhange/ALT, cindezela u-pan ukuze ushintshe amafindo aphakathi nendawo abe kuzilawuli ze-HPF.
• I-ARM/LF Cindezela bese ubamba u-Arm ukuze ubonise isimo sengalo kumafindo, bese ucindezela inkinobho ukuze uguqule ingalo/unqamule. Ngenkathi ubambe i-Bank/ALT, cindezela u-Arm ukuze ushintshe ama-knobs aphezulu naphakathi kuya kuzilawuli ze-LF EQ.
• IBHANG/ALT Cindezela ukuze ubonise futhi ulawule i-Ch 17-32.
• IBHASI/MF Cindezela ukuze ubonise futhi ulawule amabhasi. Ngenkathi ubambe i-Bank/ALT, cindezela i-Bus ukuze ushintshe ama-knobs aphezulu naphakathi kuya kuzilawuli ze-MF EQ.
• I-DLY/HF Cindezela ukuze ushintshe amafindo aphakathi ukuze ulibazise kanye nezilawuli zokuguqula i-polarity. Ngenkathi ubambe i-Bank/ALT, cindezela u-Dly ukuze ushintshe ama-knobs aphezulu naphakathi kuya kuzilawuli ze-HF EQ.

Izinkinobho Zemethadatha
Ihlela imethadatha yamanje noma elandelayo. Ngenkathi urekhoda, imethadatha yokuthatha kwamanje iyahlelwa. Ngenkathi imisiwe, ukuthatha okurekhodiwe kokugcina noma imethadatha yokuthatha okulandelayo ingahlelwa. Ngenkathi ukumodi yokuma, cindezela okuthi Misa ukuze ushintshe phakathi kokuhlela ukuthatha kwamanje nokulandelayo.

• ISIGCAWU Cindezela ukuze uhlele igama lesigcawu. Ngenkathi urekhoda, isigcawu samanje sokuthatha siyahlelwa. Ngenkathi imisiwe, ukuthatha okurekhodiwe kokugcina noma isigcawu esilandelayo singahlelwa. Ngenkathi ukumodi yokuma, cindezela okuthi misa ukuze ushintshe phakathi kokuhlela isigcawu samanje nesilandelayo.
• TAKE Cindezela ukuhlela inombolo yokuthatha. Kurekhodi, inombolo yamanje yokuthatha iyahlelwa. Esitobhini, inombolo yokugcina erekhodiwe noma elandelayo yokuthatha ingahlelwa. Ngenkathi umile, cindezela okuthi misa ukuze ushintshe phakathi kokuhlela inombolo yokuthatha yamanje nelandelayo.
• AMANOTHI Cindezela ukuze uhlele amanothi. Erekhodini, amanothi okuthathwa kwamanje ayahlelwa. Esitobhini, ukuthatha okurekhodiwe kokugcina noma okulandelayo kungahlelwa. Ngenkathi umile, cindezela ima ukuze ushintshe phakathi kokuhlela amanothi amanje kanye nalandelayo owathathayo.
• INC Cindezela ukuze ukhulise igama lesigameko. Idinga ukuthi i-
• Files>Imodi Yokunyuswa Kwesigcawu isethwe ukuze ithi Uhlamvu noma Izinombolo.
• AMANGA Cindezela ukwenza okokugcina okurekhodiwe ukuthatha ukuthatha okungamanga. Cindezela ukuze uzungelezele ukuthatha okukhethiwe.

Izinkinobho Ezinikezwa Umsebenzisi
I-CL-16 ihlinzeka ngezinkinobho ezinhlanu eziyisisekelo ezilungiselelwa umsebenzisi, U1 ukuya ku-U5 ukuze ufinyelele ngokushesha emisebenzini emihlanu eyintandokazi. Imisebenzi efakwe kumephu kulezi zinkinobho ichazwe ezinkambini Zesichazi Senkinobho Yomsebenzisi zeNdawo Yolwazi Eyinhloko ye-LCD. Yabela imisebenzi kulezi zinkinobho kokuthi Izilawuli>Ukumepha>Imodi yokufunda.
Ezinye izinqamuleli zezinkinobho zabasebenzisi ezinhlanu (ezozonke eziyishumi) zingafinyelelwa ngokubamba inkinobho ethi Bank/Alt bese ucindezela u-U1-U5. Mepha lokhu ngokubamba u-Alt bese ucindezela inkinobho ethi U kumephu>Imodi yokufunda.
Ezinye izinkinobho/izinkinobho ngakwesokunene se-CL-16 zingafakwa kumephu nakule menyu.

Buyela / Com Izinkinobho
Cindezela ukuze ugade ukubuyiselwa kuma-headphone. Uma usebenzisa i-Scorpio, qapha i-Com Rtn 2 ngokucindezela u-Com Rtn ngenkathi ucindezela inkinobho ye-HP. Inkinobho ye-Com Rtn ikhanyisa ngokuluhlaza lapho iqapha i-Com Rtn 2 kanye newolintshi lapho iqapha i-Com Rtn

1. Cindezela u-Com 1 ukuze wenze kusebenze ukuxhumana kwe-Com 1. Cindezela u-Com 2 ukuze wenze kusebenze ukuxhumana kwe-Com 2.

Inkinobho Yemitha
Cindezela ukuphuma kumodi bese ubuyela emuva kokusetha ngaphambilini kwe-HP ukuze ubuyele kumitha yasekhaya ye-ch 1-16 view.

Inkinobho Yemenyu

• Cindezela ukufaka imenyu.
• Bamba u-Menu bese ucindezela ibhodwe lokunquma ukuze uthulise isiteshi.
• Bamba Imenyu bese ucindezela isishumeki somugqa ophezulu ukuze uthulise okukhiphayo (uma isethi yomugqa ophezulu ibonisa okuphumayo)
• Bamba Imenyu bese ucindezela isishumeki serowu esimaphakathi Kumodi Yebhasi noma isishumeki serowu ephezulu kokuthi Ibhasi Thumela ngeModi yeFaders ukuze uthulise ibhasi.
• Bamba u-Menu bese uhambisa ama-toggles e-PFL kwesokunxele ukuze ufinyelele kumamenyu njengoba kuchazwe ku-System>Menu+PFL Shintsha Isenzo imenyu.
• Inquma ukuthi ukusebenza kwesikhashana kungena nini. Ukubamba inketho ekhethiwe isikhathi eside kune-threshold kuzomisa leyo nketho ukuthi isebenze njengesikhashana.

Imininingwane

Imininingwane ingashintsha ngaphandle kwesaziso sangaphambili.
Ukuze uthole ulwazi lwakamuva olutholakala kuyo yonke imikhiqizo Yamadivayisi Omsindo, vakashela yethu webindawo: www.sounddevices.com

• I-VOLTAGE 10-18 V DC ku-XLR-4. Phina 4 = +, phini 1 = umhlabathi.
• I-CURRENT DRAW (MIN) 560 mA ithule ngo-12 V DC phakathi, zonke izimbobo ze-USB zishiywe zivuliwe
• UMDLALO WAMANJE (MID) 2.93 A, izimbobo ze-USB seziphelele zomthwalo ongu-5A
• UMDLALO WAMANJE (MAX) 5.51 A, isamba sembobo yembobo ye-USB engu-10A
• I-USB-A PORTS 5 V, 1.5 A ngayinye
• I-USB-C PORTS 5 V, 3 A ngayinye
• IZITHUBA EZIKUDE, AMANDLA 5 V, 1 A atholakala ku-pin 10
• IZITHUBA EZIKUDE, OKUFAKAYO 60 k ohm okokufaka okujwayelekile Z. Vih = 3.5 V min, Vil = 1.5 V max
• IZITHUBA EZIKUDE, OKUPHUMAYO 100 ohm ohm okukhiphayo Z lapho ilungiselelwe njengokuphumayo
• UKUSHINTSHA UNYAWO 1 k ohm okokufaka okujwayelekile Z. Xhuma emhlabathini ukuze usebenze (okusebenzayo kuphansi).
• Isisindo: 4.71 kg (10 lbs 6 oz)
• UBUNGO: (HXWXD)
• ISIKRINI SIGOQWE PHANSI 8.01 cm X 43.52 cm X 32.913 cm (3.15 in. X 17.13 in. X 12.96 in.)
• ISIKRENI ESIGOQWE UP 14.64 cm X 43.52 cm X 35.90 cm (5.76 in. X 17.13 in. X 14.13 in.)

Ukusevisa amaFader
I-CL-16 ifaka izimfashini zika-Penny & Giles ezisebenziseka kalula. Ama-fader angashintshwa ngokushesha ngomzamo omncane.

I-FADER YOKUFAKA esikhundleni:
U-Penny & Giles 104 mm Linear Manual Fader PGF3210

UKUSUSA I-FADER:

1. ISINYATHELO 1 Khipha i-fader knob ngokudonsa ngobumnene phezulu.
2. ISINYATHELO 2 Susa izikulufu ezibambe i-fader endaweni. Eyodwa ngenhla
3. ISINYATHELO 3 Phenya iyunithi ukuze ufinyelele imbobo ye-fader. Susa izikulufu ezimbili bese ususa isembozo.
4. ISINYATHELO 4 Nqamula ukuxhumana kukagesi okuyi-fader ngokudonsa kancane.
5. ISINYATHELO 5 Susa i-fader. UKUFAKA I-FADER ENTSHA BUYISA IZINYATHELO EZINGAPHAMBILI:
6. ISINYATHELO 6 Faka i-fader entsha. Faka esikhundleni
   U-Penny & Giles 104 mm Linear Manual Fader PGF3210.
7. ISINYATHELO 7 Xhuma kabusha izixhumo zikagesi eziyifader.
8. ISINYATHELO 8 Faka esikhundleni sephaneli yangemuva nezikulufi zokungena ngemuva.
9. ISINYATHELO 9 Faka esikhundleni izikulufu ezimbili zefader.
10. ISINYATHELO 10 Buyisela i-fader knob.

Isimemezelo Sokuvumelana

• Igama Lomkhiqizi: Amadivayisi Omsindo, LLC
• Ikheli Lomkhiqizi: E7556 State Road 23 kanye no-33
• Reedsburg, WI 53959 USA

Thina, Amadivayisi Omsindo LLC, simemezela ngaphansi kwesibopho sethu sodwa ukuthi umkhiqizo:

• Igama lomkhiqizo: CL-16
• Inombolo Model: CL-16
• Incazelo: I-Linear Fader Control Surface ye-8-Series

kuhambisana nezidingo ezibalulekile zomthetho ofanele wokuvumelanisa weNyunyana:

• I-Electromagnetic Compatibility Directive 2014/30/EU
• I-Vol ephansitagIsiqondisi 2014/35 / EU
• I-RoHS Directive 2011/65/EU

Kusetshenziswe amazinga ahambisanayo alandelayo kanye / noma imibhalo evamile:

• Ukuphepha EN 62368-1:2014
• I-EMC EN 55032:2015, Ikilasi B
• EN 55035:2017
• Lesi Simemezelo Sokuvumelana sisebenza kumkhiqizo (imikhiqizo) esohlwini olungenhla olubekwe emakethe ye-EU ngemuva kwalokhu:
• Februwari 11, 2020
• Usuku uMat Anderson - Amadivayisi Omsindo, uMongameli we-LLC

Lo mkhiqizo uhlanganisa isofthiwe ngaphansi kwelayisensi ye-BSD: Copyright 2001-2010 Georges Menie (www.menie.org)
Wonke Amalungelo Agodliwe. Ukusatshalaliswa kabusha kanye nokusetshenziswa kumafomu omthombo nakumafomu kanambambili, ngokulungiswa noma ngaphandle, kuvunyelwe inqobo nje uma lezi zimo ezilandelayo zihlangatshezwana nazo

• Ukusatshalaliswa kabusha kwekhodi yomthombo kufanele kugcine isaziso se-copyright esingenhla, lolu hlu lwemibandela kanye nomshwana wokuzihlangula olandelayo.
• Ukusabalalisa kabusha ngendlela kanambambili kufanele kukhiqize kabusha isaziso se-copyright esingenhla, lolu hlu lwemibandela kanye nomshwana wokuzikhipha emthwalweni olandelayo embhalweni kanye/noma ezinye izinto ezinikezwe ngokusatshalaliswa.
• Akulona igama leNyuvesi yaseCalifornia,
• I-Berkeley noma amagama ababambiqhaza bayo angase asetshenziselwe ukugunyaza noma ukukhuthaza imikhiqizo ethathwe kule softhiwe ngaphandle kwemvume ebhaliwe yangaphambili.

LE SOFTWARE IHLINZEKWA AMA-REGENT KANYE NABABELEKILE “NJENGOBA YIYO'' KANYE NOMA YIZIPHI IZIQINISEKISO EZICHAZEKILE NOMA EZISETHEKILEYO, KUHLANGANISA, KODWA AKUkhawulelwe, IZIQINISEKISO EZISHIWO ZOKUTHENGISA NOKULUNGA KWENJONGO ETHILE KANYE AKUKHO INKONZO ETHILE FUTHI AKUKHO ENTJONGO ETHILE. ABABELEKILEYO BAZOBOPHEZWA NGENOMA YIYIPHI IMALI OKUQONDILE, OKUQONDILE, OKWENZAKALELAYO, OKUKHETHEKILE, ISIBONELO, NOMA OKULANDELAYO (KUHLANGANISA, KODWA AKUkhawulelwe, UKUTHENGA IZIMPAHLA NOMA IZINKONZO EZINYE ENYE; UKULAHLEKELWA KOMSEBENZI, IMINININGWANE YOMTHETHO; KUBANGELEKILE FUTHI KUNOMA YIMUPHI UMBONO WOKUBOPHEZELA, KUNGAKHATHALISEKILE, OKUNGENZEKA IMKOLELO, NOMA I-TORT (KUHLANGANISA NEBUDEBESHI NOMA OKUNYE) OKUVELA NGANOMA YIYIPHI INDLELA YOKUPHUMA UKUSETYENZISWA KWALE SOFTWARE, NOMA ENGALULWA NGOKUBA KHONA OKUNGENZEKA KOKULOKHU.

• I-Allocator yememori ye-Level Segregated Fit, inguqulo 3.1.
• Ibhalwe nguMatthew Conte Http://tlsf.baisoku.org
• Ngokusekelwe emibhalweni yokuqala kaMiguel Masmano: http://www.gii.upv.es/tlsf/main/docs
• Lokhu kuqaliswa kwabhalwa ngokwemibandela yombhalo, ngakho-ke akukho mingcele ye-GPL esebenzayo. Ilungelo lobunikazi (c) 2006-2016, Matthew Conte Wonke amalungelo agodliwe. Ukusatshalaliswa kabusha kanye nokusetshenziswa kumafomu omthombo nakumafomu kanambambili, ngokulungiswa noma ngaphandle, kuvunyelwe uma nje kuhlangatshezwana nezimo ezilandelayo:
• Ukusatshalaliswa kabusha kwekhodi yomthombo kufanele kugcine isaziso se-copyright esingenhla, lolu hlu lwemibandela kanye nomshwana wokuzihlangula olandelayo.
• Ukusabalalisa kabusha ngendlela kanambambili kufanele kukhiqize kabusha isaziso se-copyright esingenhla, lolu hlu lwemibandela kanye nomshwana wokuzikhipha emthwalweni olandelayo embhalweni kanye/noma ezinye izinto ezinikezwe ngokusatshalaliswa.
• Alikho igama lomnikazi we-copyright noma amagama abanikeli balo elingasetshenziselwa ukuvumela noma ukukhuthaza imikhiqizo etholakala kule software ngaphandle kwemvume ethile ebhaliwe.

LE SOFTWARE INIKEZELWA ABAMNTU BE-COPYRIGHT KANYE NABANIKELI “NJENGOBA YIYO” KANYE NOMA YIZIPHI IZIQINISEKISO EZICHAZEKILE NOMA EZISEMANDLA, KUHLANGANISA, KODWA AKUPHELELE, IZIQINISEKISO EZISHIWO ZOKUTHENGISWA KANYE NOBULUNGISA NGENJONGO ETHILE. AKUKHO MCIMBI ONGAYOBA NESIBOPHO NGENXA YENOMA YILUPHI OKUQONDILE, OKUQONDILE, KWEZENZAKALO, OKUKHETHEKILE, ISIBONELO, NOMA OKULANDELAYO (KUHLANGANISA, KODWA AKUkhawulelwe, UKUTHENGA IZIMPAHLA NOMA IZINKONZO, IZIMALI; UKUPHAZAMISEKA) NOMA KUBANGELWE FUTHI KUNOMA YIMUPHI UMBONO WOKUBOPHEZWA, KUNGAKHATHALISEKILE, ISIBOPHO ESIQINILE, NOMA I-TORT (KUHLANGANISA NEBUDEBEPHO NOMA OKUNYE) OKUVELA NGANOMA YIYIPHI INDLELA EKUSETSHENZISWA KWALE SOFTWARE, NOMA UMA BELULEKWA NGESIKHATHI.

Ibhokisi Leposi 576
E7556 State Rd. 23 kanye no-33 Reedsburg, Wisconsin 53959 USA
support@sounddevices.com

+ 1 608.524.0625 main
+ 1 608.524.0655 ifeksi 800.505.0625 yamahhala

www.sounddevices.com 

Amadokhumenti / Izinsiza

AMADIVAYISI OMSINDO CL-16 Ukulawula Fader Ewumugqa Wokuqopha Imiksi [pdf] Umhlahlandlela Womsebenzisi CL-16, CL-16 Linear Fader Control for Mixer Recorders, Linear Fader Control for Mixer Recorders, Fader Control for Mixer Recorders, Control for Mixer Recorders, Mixer Recorders

Izithenjwa

• Imaniwali yosebenzisayo