COOPER CLS DMX Decoder DMX Light Controller
Litlhaloso
- Lebitso: CLS-DMX-DECODER
- Kenyo: 12 - 24VDC
- Sephetho: 12 - 24VDC
- Moroalo o Moholo: 4CH x 5A, 4CH x 192W (24V)
Litaelo tsa Tšebeliso ea Sehlahisoa
Polokeho & Litemoso
- Install in accordance with national and local electrical code.
- Make sure power is OFF before starting installation or maintenance.
- Handle the fixture with care due to sharp edges.
- Do not install the fixture in spaces where impacts from objects can occur.
Litaelo tsa ho Hloma
- Tima motlakase ho sekhechana sa potoloho pele o kenya.
- Determine the location to install components by referring to system diagrams.
- Etsa qeto ea libaka tsa taolo ho latela tataiso ea sistimi.
- Connect the decoder to the DMX controller following the wiring diagram.
TLHOKOMELO
- Kotsi ea Mollo, Tšisinyeho ea Motlakase, Ho Seha kapa Likotsi tse ling tsa Mahlatsipa- Ho kenya le ho hlokomela sehlahisoa sena ho tlameha ho etsoa ke setsebi sa motlakase se nang le tsebo. Sehlahisoa sena se tlameha ho kenngoa ho latela khoutu ea ho kenya e sebetsang ke motho ea tsebang kaho le ts'ebetso ea sehlahisoa le likotsi tse amehang.
- Kotsi ea Mollo le Tšhiso ea Motlakase- Etsa hore matla a itseng a TIMA pele o qala ho kenya kapa ho leka ho lokisa. Tlosa motlakase ho fuse kapa sekhechana sa potoloho.
- Kotsi ea Mollo- Bonyane 90°C phepelo ea li-conductors.
- Kotsi ea ho Chesoa - Tlosa motlakase 'me u lumelle thepa hore e phole pele o e tšoara kapa o e sebeletsa.
- Kotsi ea Kotsi ea Botho- Ka lebaka la likarolo tse bohale, tšoara ka hloko.
- Kotsi ea Kotsi ea Botho- Tokiso e sa rereloang ho kenngoa sebakeng sa boikoetliso kapa sebaka se seng moo ho ka hlahang liphello tse tsoang linthong.
- Ho hloleha ho latela litaelo tsena ho ka baka lefu, likotsi tse mpe 'meleng le tšenyo ea thepa.
TLHOKOMELO EA MOLAMO: Cooper Lighting Solutions ha e nke boikarabello bakeng sa tšenyo kapa tahlehelo ea mofuta ofe kapa ofe e ka hlahang ka lebaka la ts'ebetso e sa lokelang, e sa tsotelleng, kapa e sa tsotelleng, ho sebetsana kapa tšebeliso ea sehlahisoa sena.
BOHLOKOA: Bala ka hloko pele u kenya sesebelisoa. Boloka bakeng sa litšupiso tsa nako e tlang.
TSEBISO: Sekurufu sa mobu o motala se fanoe sebakeng se nepahetseng. Se ke oa falla.
TSEBISO: Tokiso e ka senyeha kapa ea se tsitse haeba e sa kengoa hantle.
Hlokomela: Lintlha le litekanyo li ka fetoha ntle le tsebiso.
TLHOKOMELO Receiving Department: Note actual fixture description of any shortage kapa tshenyo e hlokomelehang ho rasiti ya thomelo. File kopo ea common carrier (LTL) ka kotloloho le mojari. Litlaleho tsa tšenyo e patiloeng li tlameha ho kenngoa matsatsing a 15 ka mor'a ho pepa. Lintho tsohle tse senyehileng, tse felletseng ka liphutheloana tsa mantlha li tlameha ho bolokoa.
POLOKO LE LITEMOSO
- Kenya ho latela melao ea naha le ea lehae ea khoutu ea motlakase.
- Sehlahiswa sena se reretswe ho kenngwa le ho sebeletswa ke ramotlakase ya tshwanelehang, ya nang le laesense.
- U SE KE UA hokela ka kotloloho ho molumo o phahamengtage matla.
Install with a compatible Class 2 constant voltage LED mokhanni (phepelo ea matla). - Sehlahisoa sena se lekantsoe bakeng sa ho kenngoa ka tlung 'me ha se sireletsehe khahlanong le mongobo.
- Install appropriately rated wire between driver,decoder, and fixture. When choosing wire, factor in voltagke theoha, amperage rating, and type (in-wall rated, etc.) Inadequate wire installation may cause fire.
- Se ke oa fetola kapa oa qhaqha sehlahisoa ho feta litaelo kapa tiisetso e tla ba lefeela.
MAXIMUM DAISY-CHAIN DMX DECODERS
A maximum of 10x DMX Decoders may be connected together via RJ45 DMX Connection Ports. DMX signal may be extended further by installing a DMX 8-Way Splitter after the 10th DMX Decoder.
LIPAKENG TSA POTLAKO / MEHLALA
| Kenyeletso | Sephetho | Max Mojaro | |
| CLS-DMX-Decoder | 12 - 24VDC | 12 - 24VDC | 4CH x 5A
4CH x 192W (24V) |
- RDM Support: Ho joalo
- Output PWM Frequency: 2KHz
- DMX Splitter Compatible: Yes
- Environment: Indoor Location
Tlosa Matla ho Circuit Breaker
Determine Location To Install Components
Sheba ho LITŠOANTŠISO TSA SYSTEM.
Determine Control Zones
Determine and group fixtures to be controlled together and one (1) decoder per run is necessary.
Connect Decoder To Dmx Controller.
DMX Decoder to DMX Controller (see diagram above and wiring diagram).
Install Additional Components, Verify
Connections, Turn Main Power On At Breaker.
TS'EBETSO
DMX QALA SETŠOANTŠO
TSEBISO
PHETHA ADDRESS YA DMX
USE THE 3 BUTTONS OF THE DMX START CHANNEL TO ADJUST THE VALUES OF THE DMX ADDRESS. THE DECODER WILL CONTROL UP TO 512 CHANNELS.
- Ho seta aterese ea DMX, tobetsa o hatelle 'konopo ea 1' metsotsoana e 2 ho fihlela linomoro li hlaha skrineng.
- Khetha aterese e ipapisitseng le ts'ebetso ea "DMX Controller" ea mantlha (sheba tataiso ea ho kenya lerako / remoutu). Hang ha aterese e khethiloe, likanale tse 3 tse setseng li tla sebelisoa ka mokhoa oa digital. Bakeng sa mohlalaample, if the decoder is addressed to 001 on the display then CH1 – 001, CH2 – 002, СН3 – 003, CН4 – 004. (see diagram on page 5 – System Diagram with DMX Wall Controller)
- Hang ha pontšo e emisa ho benya, aterese ea DMX e setiloe.
- Tšoara 'konopo 1″ bakeng sa metsotsoana e 3 ho netefatsa tlhophiso
- Indicator light will light red when data signal is confirmed
Cooper Lighting Solutions strongly recommends only professional DMX installers utilize the following settings. All standard DMX applications specified by Cooper Lighting Solutions do not require these settings to be adjusted.
LIEKETSENG DMX.
The DMX channels can be adjusted, which allows the user to conserve DMX addresses that may be wasted when programming a large DMX universe!
The factory default is 4 channels and is most commonly used: 4 channels (address 001 – 004) as highlighted in the chart below.
Ho fetola litlhophiso tsa kanale:
- Press and hold ‘button 2 and 3’ simultaneously for 2 seconds until ‘cH’ flashes on display (Fig. 2).
- Tobetsa 'konopo 1' ho khetha 1, 2, 3, kapa 4 liphetho tsa kanale (setšoantšo sa 3).
- Tobetsa o hatelle konopo efe kapa efe bakeng sa > metsotswana e 2 ho seta tlhahiso ya kanale.
- Tšoara 'konopo 1' metsotsoana e 3 ho netefatsa maemo
PWM MOEKETSI
Maqhubu a kamehla a PWM ke PF2 (2KHz)
HO BEA DIMMING CURVE GAMMA VALUE
The dimming curve gamma value can be adjusted for special applications. Default dimming curve is g1.0 (Gamma 1.0)
Ho fetola litlhophiso tsa kanale:
- Press and hold ‘buttons 1, 2, and 3’ simultaneously for 3 seconds until ‘g1.0’ flashes on display (Fig. 5).
- Tobetsa 'konopo 2' le 'konopo 3' ho fetola boleng ba gamma.
- Tšoara 'konopo 1' metsotsoana e 3 ho netefatsa maemo
LIEKETSENG SENANE
Setšoantšo se latelang se fanoe e le example system design. Shielded CAT (RJ45 connections) data cables are the most cost-effective solution for transmitting DMX-512 signals. Shielded XLR-3 cables are recommended for minimal EMI and require an additional adapter for connecting to DMX decoders.
Hlokomela: Shielded cables with RJ45 connections are provided by others.
KEKETSO MATHALO LEBELE
| MMG | Max Run Length of Luminaries | |||
| STD Mokhanni | ND Mokhanni | |||
| W/ft | 90W | 60W | 96W | 60W |
| 03W | 30ft | 20ft | 32ft | 20ft |
| 05W | 18ft | 12ft | 19ft | 12ft |
| 06W | – | – | 14ft | 9ft |
| 08W | 11ft | 7ft | 12ft | 7ft |
** Kenya sehlopha sa 2 se lumellanang sa voltage driver. It is recommended to load the driver no more than 80% its labeled rating for maximum longevity.
‡ Refer to driver specifications for a compatible junction box
HO BATLE PHOSO
| Letšoao | Lebaka le Tloaelehileng |
| Sebopeho se arabelang ka mokhoa o fosahetseng le/kapa oa panya-panya | • Incorrect wiring. Reversing Data + and Data -will cause lights to flicker.
• Ensure compatible constant voltage mokhanni o kentsoe. • Check connections of additional components. |
| Ha e khone ho fetola aterese ea DMX | • Hold in button ‘0-5’ for 3 seconds until display flashes continuously, then set address and confirm setting. |
MAXIMUM DAISY-CHAIN DMX DECODERS
A maximum of 10x DMX Decoders may be connected together via RJ45 DMX Connection Ports. DMX signal may be extended further by installing a DMX Splitter after the 10th DMX Decoder.
Consult factory for components.
TLHOKOMELOTAGE LEROHANG LICHATE
Bakeng sa ts'ebetso e ntle ka ho fetisisa le tlhahiso ea lumen, etsa bonnete ba hore ho kentsoe terata e nepahetseng ho lefella voltage drop of low voltage lipotoloho.
ExampLe: 24V Moqtage Drop & Wire Length Chart
24V Moqtage Drop & Wire Length Chart
| Mohala Lekhalo | 10 W
.42 A. |
20 W
.83 A. |
30 W
1.3 A |
40 W
1.7 A |
50 W
2.1 A |
60 W
2.5 A |
70 W
2.9 A |
80 W
3.3 A |
100 W
4 A |
| 18 AWG | 134ft. | 68ft. | 45ft. | 33ft. | 27ft. | 22ft. | 19ft. | 17ft. | 14ft. |
| 16 AWG | 215ft. | 109ft. | 72ft. | 54ft. | 43ft. | 36ft. | 31ft. | 27ft. | 22ft. |
| 14 AWG | 345ft. | 174ft. | 115ft. | 86ft. | 69ft. | 57ft. | 49ft. | 43ft. | 36ft. |
| 12 AWG | 539ft. | 272ft. | 181ft. | 135ft. | 108ft. | 90ft. | 77ft. | 68ft. | 56ft. |
| 10 AWG | 784ft. | 397ft. | 263ft. | 197ft. | 158ft. | 131ft. | 112ft. | 98ft. | 82ft. |
SHEBA CLS-DMX-DECODER – DMX 4-CHANNEL DECODER SHEET SPECIATIONS
Bakeng sa lintlha tse felletseng.
Litiisetso le Moeli oa Boikarabelo
Ka kopo sheba ho www.cooperlighting.com/Warranty bakeng sa lipehelo le lipehelo tsa rona.
Phatlalatso ea FCC
Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC.
Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi.
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
Hlokomela: Motho ea fanang ka thuso ha a ikarabelle bakeng sa liphetoho leha e le life kapa liphetoho tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa ho latela melao. Liphetoho tse joalo li ka senya matla a mosebedisi a ho sebelisa thepa.
Hlokomela: The equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off an on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
- Eketsa karohano pakeng tsa thepa le moamoheli.
- Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
- Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.
Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng. Thepa ena e tlameha ho kengoa le ho sebetsoa ho latela litaelo tse fanoeng mme manakana (li)sebelisoa tse sebelisoang bakeng sa transmitter ena li tlameha ho kengoa ho fana ka sebaka sa karohano sa bonyane 20 cm ho tloha ho batho bohle.
Litharollo tsa Cooper Lighting
18001 East Colfax Ave
Aurora, CO 80011
1-800-760-1317
www.hobaneila.es
Bakeng sa tšebeletso kapa thuso ea tekheniki:
1-800-553-3879
Canada Sales
281 Hillmount Rd.
Markham, ON L6C 253
1-800-863-1354
© 2023 Cooper Leseli Litharollo
Litokelo tsohle li sirelelitsoe
Product availability, specifications,and compliances are subject to change without notice.
LBH
P: Ke lokela ho etsa'ng haeba ke hlokomela shor leha e le efetage kapa tšenyo holim'a pelehi?
A: Note the description of any shortage or noticeable damage on the delivery receipt and file a claim with the carrier. Claims for concealed damage must be filed nakong ea matsatsi a 15 a pelehi.
P: Na lets'oao la DMX le ka atolosoa ho feta ho tloha likoung tsa khokahano tsa RJ45 DMX?
A: Yes, the DMX signal may be extended further from the RJ45 DMX connection ports.
P: Na sesebelisoa sa DMX se lumellana le li-splitter tsa DMX?
A: Yes, the DMX decoder is compatible with DMX splitters.
Litokomane / Lisebelisoa
 |
COOPER CLS DMX Decoder DMX Light Controller [pdf] Tlhophiso Tataiso CLS DMX Decoder DMX Light Controller, Decoder DMX Light Controller, DMX Light Controller, Light Controller |