COOPER CLS DMX Decoder DMX Light Controller

Ƙayyadaddun bayanai

• Alamar: CLS-DMX-DECODER
• Shigarwa: 12-24VDC
• Fitowa: 12-24VDC
• Matsakaicin Load: 4CH x 5A, 4CH x 192W (24V)

Umarnin Amfani da samfur

Tsaro & Gargaɗi

1. Install in accordance with national and local electrical code.
2. Make sure power is OFF before starting installation or maintenance.
3. Handle the fixture with care due to sharp edges.
4. Do not install the fixture in spaces where impacts from objects can occur.

Umarnin Shigarwa

1. Kashe wuta a na'urar kashe wutar lantarki kafin shigarwa.
2. Determine the location to install components by referring to system diagrams.
3. Determine control zones as per the system guide.
4. Connect the decoder to the DMX controller following the wiring diagram.

GARGADI

• Hadarin Wuta, Girgizar Wuta, Yankewa ko wasu Hatsari na Hatsari- Shigarwa da kula da wannan samfur dole ne ƙwararren ma'aikacin lantarki yayi. Dole ne a shigar da wannan samfurin daidai da madaidaicin lambar shigarwa ta mutumin da ya saba da gini da aiki na samfur da kuma haɗarin da ke tattare da shi.
• Hadarin Wuta da Girgizar Wuta- Kashe wasu wuta kafin fara shigarwa ko ƙoƙarin kowane kulawa. Cire haɗin wutar lantarki a fuse ko na'urar kewayawa.
• Hadarin Wuta-Mafi ƙarancin 90°C masu samar da kayan aiki.
• Hadarin Ƙona- Cire haɗin wutar lantarki kuma ba da damar na'urar ta yi sanyi kafin sarrafawa ko sabis.
• Hadarin Raunin Mutum-Saboda kaifin gefuna, rike da kulawa.
• Risk of Personal Injury- Fixture not intended to be installed in a gymnasium or other space where impacts from objects can occur.
• Rashin bin waɗannan umarnin na iya haifar da mutuwa, mummunan rauni na jiki da lalacewar dukiya.

RA'AYIN ALHAKI: Cooper Lighting Solutions ba su da alhakin lalacewa ko asarar kowane nau'i wanda zai iya tasowa daga rashin dacewa, rashin kulawa, ko sakaci shigarwa, kulawa ko amfani da wannan samfurin.

MUHIMMI: Karanta a hankali kafin shigar da fixture. Riƙe don tunani na gaba.

SANARWA: Green ƙasa dunƙule bayar a dace wuri. Kar a ƙaura.

SANARWA: Ƙimar gyare-gyare na iya zama lalacewa da/ko mara ƙarfi idan ba a shigar da shi da kyau ba.

Lura: Ƙayyadaddun ƙayyadaddun bayanai da girma waɗanda ke ƙarƙashin canzawa ba tare da sanarwa ba.

HANKALI Receiving Department: Note actual fixture description of any shortage ko sanannen lalacewa akan rasidin isarwa. File da'awar gama gari (LTL) kai tsaye tare da mai ɗauka. Dole ne a gabatar da da'awar ɓoyayyen ɓoyayyiyar a cikin kwanaki 15 bayan bayarwa. Duk kayan da suka lalace, cikakke tare da shiryawa na asali dole ne a riƙe su.

TSIRA & GARGADI

1. Shigar daidai da ka'idojin lambar lantarki na ƙasa da na gida.
2. An yi niyyar shigar da wannan samfur ɗin ta ƙwararren, mai lasisin lantarki.
3. KADA KA haɗa kai tsaye zuwa babban voltage iko.
   Install with a compatible Class 2 constant voltage LED direban (power wadata).
4. An ƙididdige wannan samfurin don shigarwa na cikin gida kuma ba shi da kariya daga danshi.
5. Install appropriately rated wire between driver,decoder, and fixture. When choosing wire, factor in voltagda sauke, amperage rating, and type (in-wall rated, etc.) Inadequate wire installation may cause fire.
6. Kada a canza ko tarwatsa samfur fiye da umarni ko garanti zai zama fanko.

MAXIMUM DAISY-CHAIN DMX DECODERS
A maximum of 10x DMX Decoders may be connected together via RJ45 DMX Connection Ports. DMX signal may be extended further by installing a DMX 8-Way Splitter after the 10th DMX Decoder.

SPECS / MASU KYAUTA

	Shigarwa	Fitowa	Max Load
CLS-DMX-Decoder	12-24VDC	12-24VDC	4CH x 5A 4CH x 192W (24V)

• RDM Support: Yes
• Output PWM Frequency: 2KHz
• DMX Splitter Compatible: Yes
• Environment: Indoor Location

Kashe Wuta a Mai Rage Wuta

Determine Location To Install Components
Refer to SYSTEM DIAGRAMS.

Determine Control Zones
Determine and group fixtures to be controlled together and one (1) decoder per run is necessary.

Connect Decoder To Dmx Controller.
DMX Decoder to DMX Controller (see diagram above and wiring diagram).

Install Additional Components, Verify
Connections, Turn Main Power On At Breaker.

AIKI

DMX START CHANNEL DISPLAY

KASANCEWA

KAFA ADDININ DMX

USE THE 3 BUTTONS OF THE DMX START CHANNEL TO ADJUST THE VALUES OF THE DMX ADDRESS. THE DECODER WILL CONTROL UP TO 512 CHANNELS.

• To set the DMX address, press and hold ‘button 1’ for 2 seconds until numbers on display flash.
• Select an address based on the functionality of the primary DMX Controller (see wall / remote control installation guide). Once an address is selected, the remaining 3 channels will be utilized digitally. For example, if the decoder is addressed to 001 on the display then CH1 – 001, CH2 – 002, СН3 – 003, CН4 – 004. (see diagram on page 5 – System Diagram with DMX Wall Controller)
• Once display stops flashing, DMX address is set.
• Hold ‘button 1″ for 3 seconds to confirm the setting
• Indicator light will light red when data signal is confirmed

Cooper Lighting Solutions strongly recommends only professional DMX installers utilize the following settings. All standard DMX applications specified by Cooper Lighting Solutions do not require these settings to be adjusted.

SETTING DMX CHANNELS.
The DMX channels can be adjusted, which allows the user to conserve DMX addresses that may be wasted when programming a large DMX universe!
The factory default is 4 channels and is most commonly used: 4 channels (address 001 – 004) as highlighted in the chart below.

To change channel setting:

• Press and hold ‘button 2 and 3’ simultaneously for 2 seconds until ‘cH’ flashes on display (Fig. 2).
• Press ‘button 1’ to choose 1, 2, 3, or 4 channel outputs (Fig. 3).
• Press and hold any button for >2 seconds to set channel output.
• Hold ‘button 1’ for 3 seconds to confirm the setting

MATAKIYAR PWM
The Default PWM frequency is PF2 (2KHz)

SETTING DIMMING CURVE GAMMA VALUE
The dimming curve gamma value can be adjusted for special applications. Default dimming curve is g1.0 (Gamma 1.0)

To change channel setting:

• Press and hold ‘buttons 1, 2, and 3’ simultaneously for 3 seconds until ‘g1.0’ flashes on display (Fig. 5).
• Press ‘button 2’ and ‘button 3’ to change gamma value.
• Hold ‘button 1’ for 3 seconds to confirm the setting

TSARIN DIAGRAM

An bayar da zane mai zuwa azaman tsohonample system design. Shielded CAT (RJ45 connections) data cables are the most cost-effective solution for transmitting DMX-512 signals. Shielded XLR-3 cables are recommended for minimal EMI and require an additional adapter for connecting to DMX decoders.

Lura: Shielded cables with RJ45 connections are provided by others.

MAXIMUM RUN LENGTHS

MMG	Max Run Length of Luminaries
	STD Direba		ND Direba
W/ft	90W	60W	96W	60W
03W	30ft	20ft	32ft	20ft
05W	18ft	12ft	19ft	12ft
06W	–	–	14ft	9ft
08W	11ft	7ft	12ft	7ft

** Shigar da madaidaicin Class 2 akai voltage driver. It is recommended to load the driver no more than 80% its labeled rating for maximum longevity.
‡ Refer to driver specifications for a compatible junction box

CUTAR MATSALAR

Alama	Dalilan gama gari
Fixture responding incorrectly and/or flickering	•   Incorrect wiring. Reversing Data + and Data -will cause lights to flicker. •   Ensure compatible constant voltage driver is installed. •   Check connections of additional components.
Cannot change DMX address	•   Hold in button ‘0-5’ for 3 seconds until display flashes continuously, then set address and confirm setting.

MAXIMUM DAISY-CHAIN DMX DECODERS

A maximum of 10x DMX Decoders may be connected together via RJ45 DMX Connection Ports. DMX signal may be extended further by installing a DMX Splitter after the 10th DMX Decoder.
Consult factory for components.

VOLTAGE DROP Charts

Don mafi kyawun aiki da fitowar lumen, tabbatar an shigar da ma'aunin waya mai dacewa don rama voltage drop na low voltage da'irori.

Exampda: 24V Voltage Drop & Wire Length Chart

24V Voltage Drop & Wire Length Chart

Waya Ma'auni	10 W .42 A.	20 W .83 A.	30 W 1.3 A	40 W 1.7 A	50 W 2.1 A	60 W 2.5 A	70 W 2.9 A	80 W 3.3 A	100 W 4 A
18 AWG	134 ft.	68 ft.	45 ft.	33 ft.	27 ft.	22 ft.	19 ft.	17 ft.	14 ft.
16 AWG	215 ft.	109 ft.	72 ft.	54 ft.	43 ft.	36 ft.	31 ft.	27 ft.	22 ft.
14 AWG	345 ft.	174 ft.	115 ft.	86 ft.	69 ft.	57 ft.	49 ft.	43 ft.	36 ft.
12 AWG	539 ft.	272 ft.	181 ft.	135 ft.	108 ft.	90 ft.	77 ft.	68 ft.	56 ft.
10 AWG	784 ft.	397 ft.	263 ft.	197 ft.	158 ft.	131 ft.	112 ft.	98 ft.	82 ft.

SEE CLS-DMX-DECODER – DMX 4-CHANNEL DECODER SPECIFICATION SHEET
Don cikakkun bayanai.

Garanti da Iyakancin Alhaki
Da fatan za a koma zuwa www.cooperlighting.com/Warranty don sharuɗɗan mu.

Bayanin FCC

Wannan na'urar ta bi Sashe na 15 na Dokokin FCC.

Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
   Lura: Wanda aka ba shi ba shi da alhakin kowane canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin yin biyayya ba ta amince da su ba. Irin waɗannan gyare-gyare na iya ɓata ikon mai amfani don sarrafa kayan aiki.
   Lura: The equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off an on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Wannan na'urar tana bin iyakokin fiɗawar hasken FCC da aka tsara don yanayin da ba a sarrafa shi ba. Dole ne a shigar da sarrafa wannan kayan aiki daidai da umarnin da aka bayar kuma dole ne a shigar da eriya(s) da ake amfani da ita don wannan mai watsawa don samar da nisa na aƙalla 20 cm daga duk mutane.

Hanyoyin Haske na Cooper
18001 East Colfax Ave

Aurora, CO 80011
1-800-760-1317
www.karafarinane.com

Don sabis ko taimakon fasaha:
1-800-553-3879

Kanada Sales
281 Hillmount Rd.
Markham, ON L6C 253
1-800-863-1354

© 2023 Cooper Lighting Solutions

Duka Hakkoki
Product availability, specifications,and compliances are subject to change without notice.

FAQ

Q: What should I do if I notice any shortage ko lalacewa a kan bayarwa?
A: Note the description of any shortage or noticeable damage on the delivery receipt and file a claim with the carrier. Claims for concealed damage must be filed a cikin kwanaki 15 na bayarwa.

Q: Can the DMX signal be extended further from the RJ45 DMX connection ports?
A: Yes, the DMX signal may be extended further from the RJ45 DMX connection ports.

Q: Is the DMX decoder compatible with DMX splitters?
A: Yes, the DMX decoder is compatible with DMX splitters.

Takardu / Albarkatu

COOPER CLS DMX Decoder DMX Light Controller [pdf] Jagoran Shigarwa CLS DMX Decoder DMX Light Controller, Decoder DMX Light Controller, DMX Light Controller, Light Controller

Magana

• Manual mai amfani