Buka ea Tataiso ea Taolo ea Sebaka sa COMPUTHERM Q4Z
TLHALOSO E KAKARETSO EA MOLAOLI WA LIKA
Kaha li-boilers hangata li na le sebaka se le seng sa khokahano bakeng sa li-thermostats, ho hlokahala molaoli oa libaka ho arola sistimi ea ho futhumatsa / pholileng ka libaka, ho laola li-valve tsa libaka le ho laola boiler ho tsoa ho thermostat e fetang e le 'ngoe. Mookameli oa libaka o fumana lipontšo tse fetohang ho tsoa ho li-thermostats (T1; T2; T3; T4), o laola boiler (NO - COM) mme e fana ka litaelo tsa ho bula / ho koala li-valve tsa libaka tsa ho futhumatsa (Z1; Z2; Z3; Z4, Z1-2; Z3-4; Z1-4) e amanang le thermostats.
The COMPUTHERM Q4Z balaoli ba libaka ba ka laola libaka tse 1 ho isa ho tse 4 tsa ho futhumatsa / tse pholileng, tse laoloang Li-thermostats tse sebetsang ka 1-4. Libaka li ka sebetsa ka boikemelo ho tsoa ho tse ling kapa, ha ho hlokahala, libaka tsohle li ka sebetsa ka nako e le 'ngoe.
Ho laola libaka tse fetang 4 ka nako re khothaletsa ho sebelisa 2 kapa ho feta COMPUTHERM Q4Z balaoli ba libaka (molaoli o le mong oa libaka o hlokahala ka libaka tse 1). Tabeng ena, lintlha tsa khokahanyo tsa mahala tse laolang boiler (NO - COM) e lokela ho hokeloa ho futhumatsang / sesebelisoa se pholileng ka ho lekana.
The COMPUTHERM Q4Z taolo ea libaka e fana ka monyetla oa hore li-thermostats li laole pompo kapa valve ea libaka ntle le ho qala hitara kapa pholileng. Ka tsela ena ho bonolo ho arola mochini oa ho futhumatsa / o pholileng ka libaka, ka lebaka leo ho futhumatsa / ho pholile ha kamore e 'ngoe le e' ngoe ho ka laoloang ka thoko, kahoo ho eketsa matšeliso haholo.
Ho feta moo, ho aroloa ha sistimi ea ho futhumatsa / pholileng ho tla kenya letsoho haholo phokotsong ea litšenyehelo tsa matla, kaha ka lebaka lena ke likamore tseo feela tse tla futhumatsa / pholile ka nako efe kapa efe moo ho hlokahalang.
MohlankanaampLeano la ho arola sistimi ea ho futhumatsa ka libaka e bonts'oa setšoantšong se ka tlase:
Ho tloha ka bobeli matšelisong le ntlha ea ts'ebetso ea matla ea view, ho kgothaletswa ho kenya tshebetsong switjha e fetang e le nngwe bakeng sa letsatsi ka leng. Ho feta moo, ho eletsoa hore mocheso o itekanetseng o sebelisoe feela linakong tseo, ha kamore kapa mohaho o sebelisoa, kaha ho fokotseha ho hong le ho hong ha mocheso ka 1 °C ho boloka matla a ka bang 6% nakong ea mocheso.
LINTLHA TSA KHOKANO TSA MOLAOLI WA LIKA, TSA BOHLOKOA KA HO FETISISA DATA EA BOTHEKENE.
- E 'ngoe le e' ngoe ea libaka tse 4 tsa ho futhumatsa li na le lintlha tse amanang le tsona (T1; T2; T3; T4); e 'ngoe bakeng sa thermostat ea kamore le e' ngoe bakeng sa valve ea libaka / pompo (Z1; Z2; Z3; Z4). Thermostat ea sebaka sa 1 (T1) e laola valve ea libaka / pompo ea sebaka sa 1st (Z1), thermostat ea sebaka sa 2 (T2) e laola valve ea libaka / pompo ea sebaka sa 2nd (Z2) joalo-joalo. Ho latela taelo ea ho futhumatsa ea li-thermostats, 230 V AC voltage hlaha libakeng tsa khokahano ea li-valve tsa libaka tse amanang le li-thermostats, 'me li-valve tsa libaka / lipompo tse hokahaneng le libaka tsena tsa khokahano lia buleha / qala.
Bakeng sa boiketlo ba tšebeliso, lintlha tsa ho hokahanya tse amanang le sebaka se le seng li na le 'mala o tšoanang (T1-Z1; T2-Z2, joalo-joalo). - Libaka tsa 1 le 2, ka thōko ho libaka tsa bona tse tloaelehileng tsa ho hokahanya, li boetse li na le sebaka sa ho kopanya se kopantsoeng bakeng sa valve ea libaka / pompo (Z1-2). Haeba e 'ngoe ea li-thermostats tsa pele tse peli (T1 le/kapa T1) e ka tima, e haufi le 2 V AC vol.tage hlahang ho Z1 le/kapa Z2, 230 V AC voltage hlaha ho Z1-2 hape, 'me li-valve tsa libaka/lipompo tse hokahaneng le libaka tsena tsa khokahano lia buleha/qala. Sena Z1-2 ntlha ea kgokelo e loketse ho laola di-valve/lipompo tsa libaka ka likamoreng tse joalo (mohlala, holo kapa kamore ea ho hlapela), tse se nang thermostat e arohaneng, ha li hloke ho futhumatsa ka linako tsohle empa li hloka ho futhumala ha libaka tse peli tsa 1 li chesa.
- Libaka tsa 3 le tsa 4, ka thōko ho libaka tsa bona tse tloaelehileng tsa ho hokahanya, li boetse li na le sebaka sa ho kopanya se kopantsoeng bakeng sa valve ea libaka / pompo (Z3-4). Haeba e 'ngoe ea li-thermostats tse peli tsa bobeli (T2 le/kapa T3) e tuka, e haufi le 4 V AC vol.tage hlahang ho Z3 le/kapa Z4, 230 V AC voltage hlaha ho Z3-4 hape, 'me li-valve tsa libaka/lipompo tse hokahaneng le libaka tsena tsa khokahano lia buleha/qala. Sena Z3-4 ntlha ya kgokelo e loketse ho laola di-valve/lipompo tsa libaka ka likamoreng tse joalo (mohlala, holo kapa kamore ea ho hlapela), e se nang thermostat e arohaneng, ha e hloke ho futhumatsa ka linako tsohle empa e hloka ho futhumala ha mocheso ofe kapa ofe oa libaka tse peli tsa 2nd.
- Ho feta moo, libaka tse 'nè tsa ho futhumatsa li boetse li na le sebaka sa ho kopanya se kopantsoeng bakeng sa valve ea libaka / pompo (Z1-4). Haeba e 'ngoe ea li-thermostats tse' nè (T1, T2, T3 le/kapa T4) e tima, e haufi le 230 V AC vol.tage hlahang ho Z1, Z2, Z3 le/kapa Z4, 230 V AC voltage hlaha ho Z1-4 hape, 'me pompo e hokahane le tlhahiso Z1-4 e boetse e qala. Sena Z1-4 ntlha ya kgokelo e loketse ho laola ho futhumatsa ka likamoreng tse joalo (mohlala, holo kapa kamore ea ho hlapela), e se nang thermostat e arohaneng, ha e hloke ho futhumatsa ka linako tsohle empa e hloka ho futhumatsa ha libaka tse 'nè li futhumatsa. Sebaka sena sa ho hokahanya se boetse se loketse ho laola pompo ea potoloho e bohareng, e qalang neng kapa neng ha libaka tse futhumatsang li qala.
- Ho na le li-actuator tsa zone valve tse hlokang mohato oa ho lokisa, karolo e fetotsoeng le khokahano e sa nke lehlakore hore e sebetse. Lintlha tsa khokahano tsa mohato oa ho lokisa li haufi le (KEKETSO MATLA) e bonts'itsoeng ke FL FL seka. Lihokelo tsa mohato oa ho lokisa li sebetsa feela ha sesebelisoa sa motlakase se buletsoe. Ka lebaka la khaello ea sebaka ho na le lintlha tse peli feela tsa khokahano. Ka ho kopanya mekhahlelo ea ho lokisa li-actuator tse 'nè li ka sebetsoa.
- Fuse ea 15 e ka lehlakoreng le letona la sesebelisoa sa motlakase e sireletsa likarolo tsa molaoli oa libaka ho tsoa ho khatello ea motlakase. Tabeng ea overloading fuse e khaola potoloho ea motlakase, ho sireletsa componets. Haeba fuse e khaolitse potoloho, hlahloba lisebelisoa tse hokahaneng le molaoli oa libaka pele u li bulela hape, tlosa likarolo tse robehileng le tse bakang ho jara, ebe u kenya fuse sebaka.
- Libaka tsa 1st, 2nd, 3rd le 4th le tsona li na le sebaka se kopanetsoeng se nang le monyetla oa ho hokahanya se laolang boiler (NO - COM). Lintlha tsena tsa khokahano clamp koala ho latela taelo ea ho futhumatsa ea leha e le efe ea li-thermostats tse 'nè,' me sena se qala boiler.
- The NO – COM, Z1-2, Z3-4, Z1-4 liphetho tsa "zone controller" li na le ts'ebetso ea tieho, sheba Karolo ea 5 bakeng sa tlhaiso-leseling e batsi.
LEBAKA SETS'OANE
Hoa utloahala ho beha sebaka sa taolo ea libaka haufi le boiler le / kapa manifold ka tsela e itseng, e le hore e sireletsoe ho tloha ho metsi a rothang, tikoloho e nang le lerōle le lik'hemik'hale tse mabifi, mocheso o feteletseng le tšenyo ea mechine.
HO KENYA MOLAOLI WA LIKA LE HO E KENYA HO SEBELISA
Ela hloko! Sesebelisoa se tlameha ho kenngoa le ho kopanngoa ke setsebi se tšoanelehang! Pele o kenya taolo ea libaka ts'ebetsong etsa bonnete ba hore molaoli oa libaka kapa lisebelisoa tse hokahaneng le eona ha li hokahane le 230 V mains vol.tage. Ho fetola sesebelisoa ho ka baka ts'oaetso ea motlakase kapa ho hloleha ha sehlahisoa.
Ela hloko! Re khothaletsa hore u rale sistimi ea ho futhumatsa eo u batlang ho e laola ka molaoli oa libaka oa COMPUTHERM Q4Z e le hore sebaka sa ho futhumatsa se ka potoloha sebakeng se koetsoeng sa li-valve tsohle tsa libaka ha pompo e potolohang e buloa. Sena se ka etsoa ka potoloho ea mocheso e bulehileng ka ho sa feleng kapa ka ho kenya valve ea by-pass.
Ela hloko! E khantšitsoe boemo ba 230 V AC voltage hlaha ka liphello tsa libaka, palo e kholo ea mojaro ke 2 A (0,5 A inductive). Tlhahisoleseding ena e lokela ho nkoa ha ho kenngoa
Boholo ba lintlha tsa khokahanyo tsa COMPUTHERM Q4Z taolo ea libaka e lumella bonyane lisebelisoa tse 2 kapa tse 3 ho hokahana ka ho bapa le sebaka sefe kapa sefe sa ho futhumatsa. Haeba ho hlokahala ho feta mona bakeng sa libaka tse futhumatsang (mohlala, li-valve tsa libaka tse 4), joale likhoele tsa lisebelisoa li lokela ho kopanngoa pele li hokeloa ho molaoli oa libaka.
Ho kenya "zone controller", latela mehato ena:
- Tlosa karolo e ka morao ea sesebelisoa ho tloha phanele ea eona e ka pele ka ho lokolla li-screw tse ka tlase ho sekoaelo. Ka sena, lintlha tsa khokahanyo tsa thermostats, li-valve tsa libaka / lipompo, boiler le motlakase li fumaneha.
- Khetha sebaka sa "zone controller" haufi le boiler le / kapa manifold 'me u thehe masoba leboteng bakeng sa ho kenya.
- Sireletsa boto ea taolo ea libaka leboteng u sebelisa li-screws tse fanoeng.
- Hokela lithapo tsa lisebelisoa tsa ho futhumatsa tse hlokahalang (lithapo tsa thermostats, li-valve tsa libaka / lipompo le boiler) le lithapo tsa phepelo ea motlakase joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
- Tlosa sekoahelo se ka pele sa sesebelisoa 'me u se sireletse ka li-screws tse ka tlaase ho sekoahelo.
- Hokela "zone controller" ho marang-rang a 230 V.
Tabeng ea ho sebelisa li-valve tsa electro-thermal zone tse sebetsang butle-butle le libaka tsohle li koetsoe ha boiler bo sa sebetse, joale boiler bo lokela ho qalisoa ka ho lieha ho sireletsa pompo ea boiler. Tabeng ea ho sebelisa li-valve tsa electrothermal zone tse sebetsang ka potlako 'me libaka tsohle li koetsoe ha boiler e sa sebetse, joale li-valve li lokela ho koala ka ho lieha ho sireletsa pompo ea boiler. Sheba Karolo ea 5 bakeng sa lintlha tse ling mabapi le mesebetsi ea tieho.
TIISETSO MAHLANYA
Ha ho etsoa libaka tsa ho futhumatsa - e le ho sireletsa lipompo - ho eletsoa ho boloka bonyane potoloho e le 'ngoe ea ho futhumatsa e sa koaloang ke valve ea libaka (mohlala, potoloho ea kamore ea ho hlapela). Haeba ho se na libaka tse joalo, joale e le ho thibela mokhoa oa ho futhumatsa ho tloha ketsahalong eo ho eona lipotoloho tsohle tse futhumatsang li koetsoeng empa pompo e fetoloa, molaoli oa libaka o na le mefuta e 'meli ea ho lieha ho sebetsa.
Bulela tieho
Haeba ts'ebetso ena e kentsoe 'me lihlahisoa tsa li-thermostats li tima, joale e le ho bula li-valve tsa potoloho e futhumatsang pele u qala pompo (s), molaoli oa libaka. NO-COM le Z1-4 tlhahiso, 'me ho itšetlehile ka sebaka seo Z1-2 or Z3-4 tlhahiso e buleha feela kamora ho lieha ha metsotso e 4 ho tloha ho lets'oao la 1 la ho bulela li-thermostats, ha 230 V e hlaha hanghang tlhahisong ea sebaka seo (mohlala. Z2). Ho lieha ho khothaletsoa ka ho khetheha haeba li-valve tsa libaka li buloa / li koetsoe ke li-electrothermal actuators tse sebetsang butle, hobane nako ea tsona ea ho bula / ho koala e ka bang. 4 mets. Haeba bonyane sebaka se le seng se se se ntse se butswe, tshebetso ya ho dieha ha Turn on e ke ke ya kenngwa tshebetsong ha thermostats e buletswe.
Boemo bo sebetsang ba ts'ebetso ea ho lieha ea Turn on e bonts'oa ke khanya e putsoa ea LED e nang le linako tsa metsotsoana e 3.
Haeba "M / M” konopo e tlanya ha Turn on delay e ntse e sebetsa (blue LED e benya ka nako ea metsotsoana e 3), LED e emisa ho benya ebe e bontša mokhoa oa hajoale oa ho sebetsa (Automatic/Manual). Ebe mokhoa oa ho sebetsa o ka fetoloa ka ho tobetsa "M / M” konopo hape. Kamora metsotsoana e 10, LED e putsoa e tsoela pele ho benya ka linako tse 3-metsotsoana ho fihlela tieho e emisa.
Tima tieho
"Haeba ts'ebetso ena e kentsoe ts'ebetsong 'me liphetho tse ling tsa thermostat tsa "zone controller" li buletsoe, e le hore li-valve tsa sebaka se fanoeng li buloe nakong ea ho potoloha ha pompo, 230 V AC vol.tage nyamela ho tsoa sebakeng sa sebaka se fanoeng (mohlala Z2), tlhahiso Z1-4 'me, ho itšetlehile ka sebaka se fetotsoeng, tlhahiso Z1-2 or Z3-4 feela ka mor'a tieho ea metsotso e 6 ho tloha letšoao la ho tima la thermostat ea ho qetela, ha a ntse a NO-COM tlhahiso e tima hang hang. Ho lieha ho khothaletsoa ka ho khetheha haeba li-valve tsa libaka li buloa / li koetsoe ke li-actuator tse sebetsang ka potlako, kaha nako ea tsona ea ho bula / ho koala ke metsotsoana e seng mekae feela. Ho kenya ts'ebetso tabeng ena ho tiisa hore lipotoloho tse futhumatsang li bulehile nakong ea ho potoloha ha pompo 'me kahoo li sireletsa pompo hore e se ke ea tlala. Ts'ebetso ena e etsoa feela ha thermostat ea ho qetela e romela letšoao la ho tima ho molaoli oa libaka.
Boemo bo sebetsang ba ts'ebetso ea ho lieha ho tima ho bontšoa ke ho benya ha nako ea metsotsoana e 3 ea LED e khubelu ea sebaka sa ho qetela se tingoeng.
Ho kenya tshebetsong/ho tima tshebetso ya tieho
Ho kenya tshebetsong/ho tima mesebetsi ya tieho ya Ho bulela le ho tima, tobetsa le ho tshwara dikonopo tsa Z1 le Z2 selaolong sa libaka ka metsotsoana e 5 ho fihlela LED e putsoa e benya ka nako ea motsotsoana. O ka kenya tshebetsong/wa tima tshebetso ka ho tobetsa dikonopo Z1 le Z2. LED Z1 e bonts'a boemo ba ho lieha ha Turn on, ha LED Z2 e bonts'a boemo ba ho lieha ho tima. Tshebetso e kenngwa tshebetsong ha LED e kgubedu e tsamaisanang e hoteditswe.
Ho boloka li-setting le ho khutlela ho boemo ba kamehla ema metsotsoana e 10. Ha LED e putsoa e emisa ho benya, molaoli oa libaka o qala ts'ebetso e tloaelehileng.
Mesebetsi ea ho lieha e ka khutlisetsoa ho maemo a fektheri (boemo bo sa sebetseng) ka ho tobetsa konopo ea "RESET"!
SEBELISA MOLAOLI LIBAKA
Kamora ho kenya sesebelisoa, ho se kenya ts'ebetsong le ho se bulela ka switch ea sona (boemo ON), e se e loketse ho sebetsa, e bontšoang ke boemo bo khantšitsoeng ba LED e khubelu e nang le letšoao “MATLA” le LED e putsoa e nang le letšoao "A/M" phanele e ka pele. Ka mor'a moo, ho latela taelo ea ho futhumatsa ea life kapa life tsa thermostats, li-valve tsa libaka / lipompo tse amanang le thermostat li bulehile / li qala 'me boiler le eona ea qala, hape ho nka ts'ebetso ea ho lieha ea Turn on (sheba Karolo ea 5).
Ka ho tobetsa konopo ea “A/M” (AUTO/MANUAL) konopo (fektheri ea kamehla MOSEBETSI boemo bo bontšoa ke khanya ea LED e putsoa haufi le "A/M" konopo) hoa khoneha ho hula li-thermostats le ho lokisa libaka tsa ho futhumatsa ka letsoho hore thermostat ka 'ngoe e qale. Sena se ka hlokahala ka nakoana haeba, mohlalaample, e 'ngoe ea li-thermostats e hlōlehile kapa betri ho e' ngoe ea li-thermostats e feletsoe ke nako. Ka mor'a ho tobetsa konopo ea "A/M" konopo, ho futhumatsa sebaka ka seng ho ka qalisoa ka letsoho ka ho tobetsa konopo e bontšang nomoro ea libaka. Ts'ebetso ea libaka tse kentsoeng ke taolo ea matsoho e boetse e bonts'oa ke LED e khubelu ea libaka, empa ka taolo ea matsoho, LED e putsoa e bonts'a "A/M" boemo ha bo boneswe. (Ha e le taolo ea matsoho, ho futhumatsa libaka ho sebetsa ntle le taolo ea mocheso.) Ho tsoa taolong ea matsoho, o ka khutlela ts'ebetsong ea kamehla ea feme e laoloang ke thermostat. (Koloi) ka ho tobetsa "A/M" konopo hape.
Tlhokomeliso! Moetsi ha a jare boikarabello bakeng sa ts'enyehelo e tobileng kapa e sa tobang le tahlehelo ea chelete e hlahang ha sesebelisoa se ntse se sebelisoa.
LIEKETSENG MOTS'OANE
- Phepelo voltage:
230 V AC, 50 Hz - Tšebeliso ea matla a standby:
0,15 W - Moqtage ea liphetho tsa libaka:
230 V AC, 50 Hz - Boikarabelo ba liphetho tsa libaka:
2 A (0.5 A inductive load) - Switchable voltage ea relay e laolang boiler:
230 V AC, 50 Hz - Nako e fetohang ea relay e laolang boiler:
8 A (2 A inductive load) - Nako ea ho sebetsa Bulela tieho:
metsotso e 4 - Nako ea ts'ebetso ea ho lieha ho tima:
metsotso e 6 - Mocheso oa polokelo:
-10 °C - + 40 °C - Mongobo o sebetsang:
5% - 90% (ntle le condensation) - Tšireletso khahlanong le liphello tsa tikoloho:
IP30
The COMPUTHERM Q4Z taolo ea libaka tsa mofuta o lumellana le litlhoko tsa litaelo tsa EMC 2014/30/EU, LVD 2014/35/EU le RoHS 2011/65/EU.
Moetsi:
QUANTRAX Ltd.
H-6726 Szeged, Fülemüle u. 34, Hungary
Mohala: +36 62 424 133
Fax: +36 62 424 672
E-mail: iroda@quantrax.hu
Web: www.quantrax.hu
www.computherm.info
Tšimoloho: China
Copyright © 2020 Quantrax Ltd. Litokelo tsohle li bolokiloe.
Litokomane / Lisebelisoa
 |
COMPUTHERM Q4Z Molaoli oa Libaka [pdf] Buka ea Taelo Q4Z, Q4Z Zone Controller, Mookameli oa Libaka, Mookameli |
