ABX00049 agbakwunyere Evaluation Board
Akwụkwọ ntuziaka onye nwe
Akwụkwọ ntuziaka ngwaahịa
SKU: ABX00049
Nkọwa
Arduino® Portenta X8 bụ sistemụ arụmọrụ dị elu na modul emebere iji mee ka ọgbọ Internetntanetị nke ihe na-abịa. Bọọdụ a na-ejikọta NXP® i.MX 8M Mini na-anabata Linux OS agbakwunyere na STM32H7 iji nweta ọba akwụkwọ / nka Arduino. Ọta na mbadamba ihe dị ka ịgbatị ọrụ Portenta X8 ma ọ bụ n'ụzọ ọzọ enwere ike iji ya dị ka ihe nrụtụ aka iji wulite ngwọta omenala nke gị.
Mpaghara ebumnuche
Mgbakọ Edge, ịntanetị ihe nrụpụta, sistemụ na modul, ọgụgụ isi
Atụmatụ
| Akụkụ | Nkọwa | |
| NXP® i.MX 8M Obere Nhazi |
4x Arm® Cortex®-A53 isi nyiwe ruo 1.8 GHz kwa isi. | 32KB L1-I Cache 32kB L1-D Cache 512kB L2 Cache |
| Arm® Cortex®-M4 isi ruo 400 MHz | 16 kB L1-I Cache 16 kB L2-D Cache | |
| 3D GPU (1x ndo, OpenGL® ES 2.0) | ||
| GPU 2D | ||
| 1x MIPI DSI (ụzọ anọ) nwere PHY | ||
| 1080p60 VP9 Profile 0, 2 (10-bit) ihe ndozi, HEVC/H.265 decoder, AVC/H.264 Baseline, Main, High decoder, VP8 decoder | ||
| 1080p60 AVC/H.264 mkpuchi, VP8 mkpuchi | ||
| 5x SAI (12Tx + 16Rx mpụga I2S ụzọ), ntinye 8ch PDM | ||
| 1x MIPI CSI (ụzọ anọ) nwere PHY | ||
| 2x USB 2.0 OTG njikwa nwere PHY agbakwunyere | ||
| 1x PCIe 2.0 (1-lane) nwere obere ike L1 | ||
| 1 x Gigabit Ethernet (MAC) nwere AVB na IEEE 1588, EEE Efficient Ethernet maka ike dị ala. | ||
| 4x UART (5mbps) | ||
| 4 x I2C | ||
| 3 x SPI | ||
| 4 x PWM | ||
| STM32H747XI Microcontroller |
Arm® Cortex®-M7 isi ruo 480 MHz nwere FPU nkenke ziri ezi. | 16K data + 16K ntụziaka L1 cache |
| 1x Arm® 32-bit Cortex®-M4 isi ruo 240 MHz nwere FPU, ihe na-eme ngwa ngwa ozugbo (ART Accelerator ™) | ||
| Ebe nchekwa | 2 MB nke ebe nchekwa Flash nwere nkwado ọgụgụ mgbe-dere 1 MB nke RAM | |
| Ebe nchekwa dị | NT6AN512T32AV | 2GB DDR4 DRAM dị ala |
| FEMDRW016G | 16GB Foresee® eMMC Flash modul | |
| USB-C® | Ọsọ USB dị elu | |
| Mmepụta DisplayPort | ||
| Ọrụ onye ọbịa na ngwaọrụ | ||
| Nkwado nnyefe ike | ||
| Elu Njupụta njikọ | 1 uzo PCI Express | |
| 1x 10/100/1000 Ethernet interface nwere PHY | ||
| 2 x USB HS | ||
| 4x UART (2 nwere njikwa mmiri) | ||
| 3 x I2C | ||
| 1 x kaadị SD interface | ||
| Akụkụ | Nkọwa | |
| 2x SPI (1 kesara ya na UART) | ||
| 1 x I2S | ||
| 1 x PDM ntinye | ||
| 4 uzo MIPI DSI mmepụta | ||
| 4 uzo MIPI CSI ntinye | ||
| 4x PWM mmepụta | ||
| 7x GPIO | ||
| Ntinye 8x ADC nwere VREF dị iche | ||
| Murata® 1DX Wi-Fi®/Bluetooth® Module | Wi-Fi® 802.11b/g/n 65Mbps | |
| Bluetooth® 5.1 BR/EDR/LE | ||
| NXP® SE050C2 Crypto |
Asambodo a na-ahụkarị EAL 6+ enwetara ikike ruo ọkwa OS | |
| RSA & ECC arụ ọrụ, ogologo igodo dị elu na akụkụ mgbanaka n'ọdịnihu, dị ka brainpool, Edwards, na Montgomery | ||
| AES & 3DES izo ya ezo na decryption | ||
| HMAC, CMAC, SHA-1, SHA-224/256/384/512 arụ ọrụ | ||
| HKDF, MIFARE® KDF, PRF (TLS-PSK) | ||
| Nkwado nke isi ọrụ TPM | ||
| Nchekwa flash onye ọrụ ruo 50kB | ||
| Ohu I2C (Ụdị ọsọ dị elu, 3.4Mbit/s), nna ukwu I2C (Ọsọ ọsọ, 400 kbit/s) | ||
| SCP03 (njikwa ụgbọ ala na ntinye nzere ezoro ezo na ọkwa applet na ikpo okwu) | ||
| RoHM BD71847AMWV PMIC nwere ike ime |
Dị ike voltage scaling | |
| 3.3V/2A voltage mmepụta na osisi ụgbọelu | ||
| Okpomọkụ oke | -45°C ruo +85°C | Ọ bụ naanị ọrụ dịịrị onye ọrụ ịnwale ọrụ bọọdụ na oke okpomọkụ zuru oke |
| Ozi nchekwa | Klas A | |
The Board
Ngwa Examples
Emebere Arduino® Portenta X8 maka ngwa mgbako agbakwunyere arụmọrụ dị elu n'uche, dabere na quad core NXP® i.MX 8M Mini Processor. Ụdị ụdị Portenta na-enyere aka iji ọtụtụ ọta gbasaa n'ọrụ ya.
Linux agbakwunyere: Bido ibuga ụlọ ọrụ 4.0 yana ngwugwu nkwado Linux Board na-arụ ọrụ na arụ ọrụ Arduino® Portenta X8. Jiri ngwa GNU mepụta ihe ngwọta gị n'enweghị mkpọchi teknụzụ.
Netwọk arụmọrụ dị elu: Arduino® Portenta X8 gụnyere Wi-Fi® na njikọ Bluetooth® iji mekọrịta ngwaọrụ dị iche iche nke mpụga yana netwọk na-enye mgbanwe dị elu. Na mgbakwunye, Gigabit Ethernet interface na-enye oke ọsọ yana obere latency maka ngwa kachasị achọ.
Mmepe agbakwunyere modular dị elu dị elu: Arduino® Portenta X8 bụ nnukwu ngalaba maka ịmepụta ọtụtụ ụdị azịza omenala. Njikọ njupụta dị elu na-enye ohere ịnweta ọtụtụ ọrụ, gụnyere njikọ PCIe, CAN, SAI na MIPI. N'aka nke ọzọ, jiri gburugburu Arduino nke bọọdụ emebere nke ọma dị ka ntụaka maka atụmatụ nke gị. Akpa soware Lowcode na-enye ohere maka mbugharị ngwa ngwa.
Ngwa (anaghị etinye ya)
- USB-C® Hub
- USB-C® gaa na ihe nkwụnye HDMI
Ngwaahịa ndị emetụtara
- Arduino® Portenta Breakout Board (ASX00031)
Ogo
Ọnọdụ ọrụ akwadoro
| Akara | Nkọwa | Min | Ụdị | Oke | Nkeji |
| VIN | Ntinye voltage sitere na VIN pad | 4.5 | 5 | 5.5 | V |
| VUSB | Ntinye voltage site na njikọ USB | 4.5 | 5 | 5.5 | V |
| V3V3 | 3.3 V mmepụta na ngwa onye ọrụ | 3.1 | V | ||
| I3V3 | 3.3 V mmepụta ugbu a dị maka ngwa onye ọrụ | – | – | 1000 | mA |
| VIH | Tinye ọkwa dị elu voltage | 2.31 | – | 3.3 | V |
| VIL | Tinye obere ọkwa voltage | 0 | – | 0.99 | V |
| Ọnụ ego nke IOH Max | Ugbu a na VDD-0.4 V, mmepụta setịpụrụ elu | 8 | mA | ||
| IOL Max | Ugbu a na VSS+0.4 V, ewepụtarala ihe nrụpụta dị ala | 8 | mA | ||
| VOH | Mmepụta elu voltage, 8mA | 2.7 | – | 3.3 | V |
| VOL | Mmepụta obere voltage, 8mA | 0 | – | 0.4 | V |
Oriri ike
| Akara | Nkọwa | Min | Ụdị | Oke | Nkeji |
| PBL | Oriri ike na akaghị aka | 2350 | mW | ||
| PLP | Oriri ike na ọnọdụ ike dị ala | 200 | mW | ||
| PMAX | Oriri ike kacha | 4000 | mW |
Iji ọdụ ụgbọ mmiri USB 3.0 dakọtara ga-ahụ na emezuola ihe achọrọ ugbu a maka Portenta X8. Ntụle dị egwu nke nkeji mkpokọta Portenta X8 nwere ike ịgbanwe oriri ugbu a, na-eduga n'ịgba elu ugbu a n'oge bootup. A na-enye nkezi oriri ike na tebụl dị n'elu maka ọtụtụ ọnọdụ ntụaka.
Arụ ọrụ gafereview
Ihe Ngosi
Board Topology
7.1 N'ihu View
| Ref. | Nkọwa | Ref. | Nkọwa |
| U1 | BD71847AMWV i.MX 8M Obere PMIC | U2 | MIMX8MM6CVTKZAA i.MX 8M Obere Quad IC |
| U4 | NCP383LMUAJAATXG Ngbanwe ike na-amachi ugbu a | U6 | ANX7625 MIPI-DSI/DPI ka USB Ụdị-C® akwa IC |
| U7 | MP28210 Kwụpụ ala IC | U9 | LBEE5KL1DX-883 WLAN+Bluetooth® Combo IC |
| U12 | PCMF2USB3B/CZ Bidirectional EMI Nchedo IC | U16,U21,U22,U23 | FXL4TD245UMX 4-Bit Bidirectional Voltage-level Ntụgharị IC |
| U17 | DSC6151HI2B 25MHz MEMS Oscillator | U18 | DSC6151HI2B 27MHz MEMS Oscillator |
| U19 | NT6AN512T32AV 2GB LP-DDR4 DRAM | IC1, IC2, IC3, IC4 | SN74LVC1G125DCKR 3-steeti 1.65-V ruo 5.5-V ihe nchekwa IC |
| PB1 | PTS820J25KSMTRLFS Tọgharia bọtịnụ | Dl1 | KPHHS-1005SURCK Ike Na SMD LED |
| DL2 | SMLP34RGB2W3 RGB nkịtị Anode SMD LED | Y1 | CX3225GB24000P0HPQCC 24MHz kristal |
| Y3 | DSC2311KI2-R0012 Mmepụta MEMS Oscillator Dual | J3 | CX90B1-24P USB Ụdị-C® njikọ |
| J4 | U.FL-R-SMT-1(60) Njikọ UFL |
7.2 Azụ View
| Ref. | Nkọwa | Ref. | Nkọwa |
| U3 | LM66100DCKR ezigbo diode | U5 | FEMDRW016G 16GB eMMC Flash IC |
| U8 | KSZ9031RNXIA Gigabit Ethernet Transceiver IC | U10 | FXMA2102L8X Nnweta Dual, 2-Bit Voltage Translator IC |
| U11 | Ihe nchekwa SE050C2HQ1/Z01SDZ IoT | U12, U13, U14 | PCMF2USB3B/CZ Bidirectional EMI Nchedo IC |
| U15 | NX18P3001UKZ Bidirectional ike mgba ọkụ IC | U20 | STM32H747AII6 Dual ARM® Cortex® M7/M4 IC |
| Y2 | SIT1532AI-J4-DCC-32.768E 32.768KHz MEMS Oscillator IC | NKWO, J1 | Njikọ njupụta dị elu |
| Q1 | 2N7002T-7-F N-Channel 60V 115mA MOSFET |
Nhazi
Arduino Portenta X8 na-eji nkeji nhazi anụ ahụ dabere na ARM abụọ.
8.1 NXP® i.MX 8M Obere Quad isi Microprocessor
MIMX8MM6CVTKZAA iMX8M (U2) nwere quad core ARM® Cortex® A53 na-agba ọsọ ruo 1.8 GHz maka ngwa arụmọrụ dị elu n'akụkụ ARM® Cortex® M4 na-agba ọsọ ruo 400 MHz. ARM® Cortex® A53 nwere ike iji sistemụ arụmọrụ Linux ma ọ bụ gam akporo gam akporo site na ngwugwu nkwado Board (BSP) n'ụdị multithreaded. Enwere ike ịgbasa nke a site na iji arịa soware pụrụ iche site na mmelite OTA. ARM® Cortex® M4 nwere obere ike oriri na-enye ohere njikwa ụra nke ọma yana ịrụ ọrụ kacha mma na ngwa ozugbo ma edobere ya maka ojiji n'ọdịnihu. Ndị nhazi abụọ ahụ nwere ike kesaa akụkụ na akụrụngwa niile dị na i.MX 8M Obere, gụnyere PCIe, ebe nchekwa on-chip, GPIO, GPU na Audio.
8.2 STM32 Dual Core Microprocessor
X8 gụnyere H7 agbakwunyere n'ụdị STM32H747AII6 IC (U20) nwere isi ARM® Cortex® M7 na ARM® Cortex® M4. A na-eji IC a dị ka onye na-agbasawanye I/O maka NXP® i.MX 8M Mini (U2). A na-achịkwa ihe ndị ọzọ na-akpaghị aka site na isi M7. Na mgbakwunye, isi M4 dị maka njikwa oge nke moto na igwe ndị ọzọ dị oke egwu na ọkwa ọkpụkpụ. Isi M7 na-arụ ọrụ dị ka onye ogbugbo n'etiti mpụta na i.MX 8M Mini ma na-arụ ọrụ ngwa ngwa nke na-enweghị ike ịnweta onye ọrụ. A naghị ekpughe STM32H7 na ịkparịta ụka n'Ịntanet na ekwesịrị ịhazi ya site na i.MX 8M Mini (U2).
Njikọ Wi-Fi®/Bluetooth®
Igwe ikuku Murata® LBEE5KL1DX-883 (U9) na-enye njikọ Wi-Fi® na Bluetooth® n'otu oge n'ime obere ngwugwu dabere na Cypress CYW4343W. Enwere ike ịrụ ọrụ IEEE802.11b/g/n Wi-Fi® interface dị ka ebe nnweta (AP), ọdụ (STA) ma ọ bụ dị ka ọnọdụ abụọ n'otu oge AP/STA ma na-akwado ọnụego mbufe kacha nke 65 Mbps. Bluetooth® interface na-akwado Bluetooth® Classic na Bluetooth® obere ike. Mgba ọkụ sekit antenna agbakwunyere na-enye ohere ịkekọrịta otu antenna mpụga (J4 ma ọ bụ ANT1) n'etiti Wi-Fi® na Bluetooth®. Modul U9 interfaces nwere i.MX 8M Mini (U2) site na 4bit SDIO na UART interface. Dabere na nchịkọta soware nke modul ikuku dị na Linux OS agbakwunyere, a na-akwado Bluetooth® 5.1 yana Wi-Fi® kwekọrọ na ọkọlọtọ IEEE802.11b/g/n.
Ncheta onboard
Arduino® Portenta X8 gụnyere modul ebe nchekwa ihe abụọ. A NT6AN512T32AV 2GB LP-DDR4 DRAM (U19) na 16GB Forsee eMMC Flash modul (FEMDRW016G) (U5) na-enweta na i.MX 8M Mini (U2).
Ike Crypto
The Arduino® Portenta X8 na-enyere IC larịị ihu-na-igwe nchekwa ikike site NXP® SE050C2 Crypto mgbawa (U11). Nke a na-enye asambodo nchekwa EAL 6+ nkịtị ruo ọkwa OS, yana nkwado RSA/ECC cryptographic algọridim yana nchekwa nzere. Ọ na-emekọrịta ihe na NXP® i.MX 8M Mini site na I2C.
Gigabit Ethernet
NXP® i.MX 8M Mini Quad gụnyere 10/100/1000 Ethernet njikwa na nkwado maka Energy Effeicient Ethernet (EEE), Ethernet AVB, na IEEE 1588. Achọrọ njikọ anụ ahụ dị n'èzí iji mezue interface ahụ. Enwere ike ịnweta nke a site na njikọ njupụta dị elu nwere akụrụngwa dị na mpụga dịka bọọdụ Arduino® Portenta Breakout.
Njikọ USB-C®
Njikọ USB-C® na-enye ọtụtụ nhọrọ njikọ karịa otu interface anụ ahụ:
- Nyenye ọkụ bọọdụ na ọnọdụ DFP na DRP
- Ike isi mmalite na mpụga mpụta mgbe agbanyere bọọdụ site na VIN
- Kpochapụ ọsọ ọsọ (480 Mbps) ma ọ bụ ọsọ zuru oke (12 Mbps) USB onye ọbịa / ngwaọrụ
- Expose DisplayPort mmepụta interface A na-eji interface DisplayPort mee ihe na njikọ USB ma enwere ike iji ya na eriri eriri USB dị mfe mgbe ejiri VIN kwadoro osisi ma ọ bụ na dongles nwere ike inye ike na bọọdụ ka ị na-emepụta DisplayPort na USB n'otu oge. Dongle ndị dị otú ahụ na-enyekarị ethernet n'elu ọdụ ụgbọ mmiri USB, ọdụ USB ọdụ ụgbọ mmiri 2 na ọdụ USB-C® nke enwere ike iji nye ike na sistemụ.
Ezigbo Oge elekere
The Real Time elekere na-enye ohere idobe oge nke ụbọchị na ike dị nnọọ ala.
Osisi Ike
Ọ bụ BD71847AMWV IC (U1) na-arụ ọrụ njikwa ike kachasị.
Ọrụ Board
16.1 Mmalite – IDE
Ọ bụrụ na ịchọrọ ịme mmemme Arduino® Portenta X8 gị mgbe ị na-anọghị n'ịntanetị, ịkwesịrị ịwụnye Arduino® IDE Desktop [1] Iji jikọọ njikwa Arduino® Portenta X8 na kọmputa gị, ị ga-achọ eriri USB Type-C®. Nke a na-enyekwa ike na osisi ahụ, dị ka LED gosipụtara.
16.2 Mmalite – Arduino Web Onye nchịkọta akụkọ
Bọọdụ Arduino® niile, gụnyere nke a, na-arụ ọrụ nke ọma na Arduino® Web Editor [2], site na ịwụnye ngwa mgbakwunye dị mfe. Arduino® Web A na-akwado onye nchịkọta akụkọ n'ịntanetị, ya mere ọ ga-adị ọhụrụ mgbe niile site na njirimara na nkwado maka bọọdụ niile. Soro [3] ka ịmalite itinye koodu na ihe nchọgharị wee bulite ihe osise gị na bọọdụ gị.
16.3 Mmalite – Arduino IoT igwe ojii
A na-akwado ngwaahịa Arduino® IoT niile na Arduino® IoT Cloud nke na-enye gị ohere ịbanye, eserese na nyochaa data ihe mmetụta, kpalite ihe omume, wee rụzie ụlọ ma ọ bụ azụmahịa gị.
16.4 Sampna Sketches
SampEnwere ike ịhụ sketị maka Arduino® Portenta X8 ma na “Examples” menu na Arduino® IDE ma ọ bụ na ngalaba “akwụkwọ” nke Arduino Pro websaịtị [4]
16.5 Ngwa ntanetị
Ugbu a na ị gafere isi ihe ị nwere ike ime na bọọdụ ị nwere ike nyochaa ohere na-adịghị agwụ agwụ ọ na-enye site na ịlele ọrụ na-akpali akpali na Project Hub [5], Arduino® Library Reference [6] na ụlọ ahịa dị n'ịntanetị [7] ebe ị ga-enwe ike imeju osisi gị na sensọ, actuators na ndị ọzọ.
16.6 Board Iweghachite
Bọdụ Arduino niile nwere bootloader arụnyere n'ime ya nke na-enye ohere ịmegharị bọọdụ ahụ site na USB. Ọ bụrụ na eserese na-emechi ihe nrụpụta na bọọdụ ahụ enweghị ike iru ọzọ site na USB, ọ ga-ekwe omume ịbanye ọnọdụ bootloader site na ịhazi DIP switches.
Mara: A chọrọ bọọdụ ụgbọelu dakọtara na mgba ọkụ DIP (dịka Portenta Max Carrier ma ọ bụ Portenta Breakout) iji mee ka ọnọdụ bootloader nwee ike. Enweghị ike iji Portenta X8 mee ya naanị.
Ozi igwe
Pinout
Ngwunye oghere na ihe ngosi osisi
Asambodo
| Asambodo | Nkọwa |
| CE (EU) | EN 301489-1 EN 301489-1 EN 300328 EN 62368-1 EN 62311 |
| WEEE (EU) | Ee |
| RoHS (EU) | 2011/65/(EU) 2015/863/(EU) |
| IHE (EU) | Ee |
| UKCA (UK) | Ee |
| RCM (RCM) | Ee |
| FCC (US) | NJ. Radio: Akụkụ 15.247 MPE: Akụkụ 2.1091 |
| RCM (AU) | Ee |
Nkwupụta nke Nkwekọrịta CE DoC (EU)
Anyị na-ekwupụta n'okpuru ọrụ anyị naanị na ngwaahịa ndị dị n'elu kwekọrọ na ihe ndị dị mkpa nke ntuziaka EU na-esote ya mere tozuru oke maka mmegharị n'efu n'ime ahịa nke nwere European Union (EU) na European Economic Area (EEA).
Nkwupụta nke Nkwekọrịta na EU RoHS & REACH 211 01/19/2021
bọọdụ Arduino kwekọrọ na RoHS 2 Directive 2011/65/EU nke European nzuko omeiwu na RoHS 3 Directive 2015/863/EU nke Council of 4 June 2015 na mmachi nke ojiji nke ụfọdụ ize ndụ ihe na ngwa eletriki na eletrọnịkị.
| Ihe | Oke kacha (ppm) |
| Ndu (Pb) | 1000 |
| Ogwugwu (Cd) | 100 |
| Ebere (Hg) | 1000 |
| Chromium Hexavalent (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Mwepu : Ọnweghị mpụ a na-ekwu.
Boards Arduino na-akwado nke ọma na ihe ndị metụtara European Union Regulation (EC) 1907/2006 gbasara ndebanye aha, nyocha, ikike na mmachi nke kemịkalụ (REACH). Anyị na-ekwupụta na ọ nweghị nke SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Ndepụta ndị Candidate nke ihe dị oke mkpa maka ikike nke ECHA wepụtara ugbu a, dị na ngwaahịa niile (yana ngwugwu) n'ogo zuru oke na mkpokọta nha ma ọ bụ karịa 0.1%. Dị ka ihe ọmụma anyị si mara, anyị na-ekwupụtakwa na ngwaahịa anyị enweghị nke ọ bụla n'ime ihe ndị e depụtara na "Ndepụta ikike" (Annex XIV nke ụkpụrụ REACH) na ihe dị oke egwu (SVHC) na oke ọ bụla dị mkpa dị ka akọwapụtara. site na Mgbakwunye XVII nke ndepụta Candidate bipụtara EHA (European Chemical Agency) 1907/2006/EC.
Nkwupụta mineral esemokwu
Dị ka onye zuru ụwa ọnụ na-eweta ngwá electronic na eletriki eletrik, Arduino maara ọrụ anyị na-ahụ maka iwu na ụkpụrụ gbasara Conflict Minerals, kpọmkwem Dodd-Frank Wall Street Reform and Consumer Protection Act, Nkebi 1502. Arduino anaghị ebute ma ọ bụ dozie esemokwu ozugbo. mineral dị ka Tin, Tantalum, Tungsten, ma ọ bụ ọla edo. Mineral esemokwu dị na ngwaahịa anyị n'ụdị solder, ma ọ bụ dị ka akụkụ na alloys metal. Dịka akụkụ nke mbọ anyị kwesịrị ekwesị Arduino akpọtụrụla ndị na-ebubata akụrụngwa n'ime ụdọ ọkọnọ anyị iji chọpụta na ha nọgidere na-agbaso ụkpụrụ ahụ. Dabere na ozi enwetara ugbu a, anyị na-ekwupụta na ngwaahịa anyị nwere mineral na-akpata esemokwu sitere na mpaghara enweghị esemokwu.
FCC ịkpachara anya
Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ.
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.
Nkwupụta Mkpughe Radiation FCC RF:
- Agaghị ejikọta ihe nnyefe a ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla ọzọ.
- Ngwa a na-akwado oke mkpughe radieshon RF ewepụtara maka gburugburu enweghị njikwa.
- Ekwesịrị ịwụnye akụrụngwa a ma rụọ ọrụ ya na anya kacha nta 20cm n'etiti radiator & ahụ gị.
Mara: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, dịka akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka ahụ siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ televishọn, nke enwere ike ikpebi site na ịgbanwuo ngwa ahụ, a na-agba onye ọrụ ume ka ọ gbalịa dozie ndabichi ahụ site na otu ma ọ bụ karịa n'ime usoro ndị a:
- Megharịa ma ọ bụ bugharịa antenna nnata.
- Mee ka nkewa dị n'etiti akụrụngwa na nnata.
- Jikọọ akụrụngwa n'ime oghere dị na sekit dị iche na nke ejikọrọ nnata.
- Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka
Akwụkwọ ntuziaka onye ọrụ maka ngwa redio enweghị ikike ga-enwe ọkwa ndị a ma ọ bụ nha nhata na ọnọdụ pụtara ìhè n'ime akwụkwọ ntuziaka onye ọrụ ma ọ bụ ọzọ na ngwaọrụ ma ọ bụ ha abụọ. Ngwaọrụ a na-akwado ụkpụrụ (s) RSS enweghị ikike ụlọ ọrụ Canada. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike bute ịrụ ọrụ ngwaọrụ a na-achọghị.
Ịdọ aka ná ntị IC SAR:
Ekwesịrị ịwụnye akụrụngwa a ma rụọ ọrụ ya na anya kacha nta 20 cm n'etiti radiator na ahụ gị.
Ngwa redio nwere sekit dijitalụ nwere ike ịrụ ọrụ dị iche na arụ ọrụ nke onye na-ebufe ma ọ bụ ihe mgbasa ozi metụtara, ga-agbaso ICES-003. N'ọnọdụ ndị dị otú ahụ, ihe achọrọ nnyemaaka nke RSS dị na ya na-emetụta, karịa ihe achọrọ akara na ICES-003. Ngwa dijitalụ Klas B a na-akwado Canada ICES-003.
Innovation, Science and Economic Development Canada kwadoro onye na-ebufe redio a [IC: 26792-ABX00049] ka ọ rụọ ọrụ na ụdị antenna ndị edepụtara n'okpuru ebe a, na-egosikwa uru kacha ekwe omume. Ụdị antenna adịghị etinye n'ime ndepụta a nke nwere uru karịa uru egosiri maka ụdị ọ bụla edepụtara bụ nke amachibidoro iji ngwaọrụ a.
| Onye nrụpụta antenna | Molex |
| Ihe nlereanya nke antenna | WIFI 6E Flex Cabed Side-Fed Antenna |
| Ụdị antenna | Mpụga omnidirectional dipole |
| Antenna Nweta: | 3.6dBi |
Ihe dị mkpa: Ọnọdụ okpomọkụ nke EUT enweghị ike ịgafe 85 ℃ ma ghara ịdị ala karịa -45 ℃.
N'ihi nke a, Arduino Srl na-ekwupụta na ngwaahịa a kwekọrọ na ihe ndị dị mkpa chọrọ yana ndokwa ndị ọzọ dị mkpa nke Ntuziaka 201453/EU. Ekwenyere ka ejiri ngwaahịa a na mba ndị otu EU niile.
| Ugboro ugboro | Ike nrụpụta kachasị (EIRP) |
| 2402-2480 MHz (EDR) | 12.18 dBm |
| 2402-2480 MHz (BLE) | 7.82 dBm |
| 2412-2472 MHz (2.4G Wifi) | 15.99 dBm |
Ozi ụlọ ọrụ
| Aha Ụlọ Ọrụ | Arduino SRL |
| Adreesị ụlọ ọrụ | Site na Andrea Appiani, 25 - 20900 MONZA (Ịtali) |
Akwụkwọ ntụaka
| Ref | Njikọ |
| Arduino IDE (Desktọpụ) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (igwe ojii) | https://create.arduino.cc/editor |
| Cloud IDE na-amalite | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web-editor- 4b3e4a |
| Arduino Pro Websaịtị | https://www.arduino.cc/pro |
| Hub Project | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Ntụaka ụlọ akwụkwọ | https://github.com/arduino-libraries/ |
| Ụlọ ahịa dị n'ịntanetị | https://store.arduino.cc/ |
Gbanwee Ndekọ
| Ụbọchị | Mgbanwe |
| 07/12/2022 | Ndozigharị maka asambodo |
| 30/11/2022 | Ozi Mgbakwunye |
| 24/03/2022 | Hapụ |
Arduino® Portenta X8
Emeziri: 07/12/2022
Akwụkwọ / akụrụngwa
 |
ARDUINO ABX00049 Embedded Evaluation Board [pdf] Akwụkwọ ntuziaka onye nwe ABX00049, 2AN9S-ABX00049, 2AN9SABX00049, ABX00049 Embedded Evaluation Board, Embedded Evaluation Board, ABX00049 Board Evaluation, Board Evaluation, Board |
