ABX00049 Hukumar Ƙimar Ƙarfafawa
Littafin Mai shi
Littafin Maganar Samfur
Saukewa: ABX00049
Bayani
Arduino® Portenta X8 babban tsarin aiki ne akan ƙirar da aka ƙera don ƙarfafa tsararrun Intanet na Abubuwa masu zuwa. Wannan kwamiti ya haɗu da NXP® i.MX 8M Mini mai ɗaukar nauyin Linux OS tare da STM32H7 don yin amfani da ɗakunan karatu / basirar Arduino. Garkuwa da allunan jigilar kaya suna samuwa don tsawaita ayyukan Portenta X8 ko kuma ana iya amfani da su azaman ƙirar ƙira don haɓaka naku mafita na al'ada.
Yankunan Target
Ƙididdigar Edge, Intanet na masana'antu na abubuwa, tsarin kan tsarin, basirar wucin gadi
Siffofin
| Bangaren | Cikakkun bayanai | |
| NXP® i.MX 8M Mini Mai sarrafawa |
4x Arm® Cortex®-A53 core dandamali har zuwa 1.8 GHz kowace cibiya | 32KB L1-I Cache 32kB L1-D Cache 512kB L2 Cache |
| Arm® Cortex®-M4 core har zuwa 400 MHz | 16 kB L1-I Cache 16 kB L2-D Cache | |
| 3D GPU (1x inuwa, OpenGL® ES 2.0) | ||
| 2D GPU | ||
| 1 x MIPI DSI (layi 4) tare da PHY | ||
| 1080p60 VP9 Profile 0, 2 (10-bit) dikodi, HEVC/H.265 mai ƙididdigewa, AVC/H.264 Baseline, Main, Babban mai ƙididdigewa, mai rikodin VP8 | ||
| 1080p60 AVC/H.264 encoder, VP8 encoder | ||
| 5x SAI (12Tx + 16Rx I2S hanyoyin waje), shigarwar PDM 8ch | ||
| 1 x MIPI CSI (layi 4) tare da PHY | ||
| 2x USB 2.0 OTG masu kula da PHY da aka haɗa | ||
| 1x PCIe 2.0 (1-lane) tare da ƙananan ƙarancin wutar lantarki na L1 | ||
| 1 x Gigabit Ethernet (MAC) tare da AVB da IEEE 1588, EIE Efficient Ethernet (EEE) don ƙaramin iko | ||
| 4 x UART (5mbps) | ||
| 4 x I2C | ||
| 3 x SPI | ||
| 4 x PWM | ||
| Saukewa: STM32H747XI Mai sarrafawa |
Arm® Cortex®-M7 core a har zuwa 480 MHz tare da daidaitattun FPU biyu. | 16K bayanai + 16K umarni L1 cache |
| 1x Arm® 32-bit Cortex®-M4 core a har zuwa 240 MHz tare da FPU, Mai haɓakawa na ainihin lokaci (ART Accelerator™) | ||
| Ƙwaƙwalwar ajiya | 2 MB na Flash Memory tare da karanta-lokacin- rubuta goyon bayan 1 MB na RAM | |
| Memorywaƙwalwar ajiya | Saukewa: NT6AN512T32AV | 2GB Low Power DDR4 DRAM |
| FEMDRW016G | 16GB Foresee® eMMC Flash module | |
| USB-C® | USB mai sauri | |
| Fitowar DisplayPort | ||
| Mai watsa shiri da na'ura aiki | ||
| Taimakon Isar da Wuta | ||
| Babban Yawan yawa masu haɗin kai | 1 layin PCI Express | |
| 1 x 10/100/1000 Ethernet dubawa tare da PHY | ||
| 2 x USB HS | ||
| 4x UART (2 tare da sarrafa kwarara) | ||
| 3 x I2C | ||
| 1 x SDCard dubawa | ||
| Bangaren | Cikakkun bayanai | |
| 2x SPI (1 da aka raba tare da UART) | ||
| 1 x I2S | ||
| 1 x PDM shigarwa | ||
| 4 layin MIPI DSI fitarwa | ||
| Hanyar MIPI CSI mai lamba 4 | ||
| 4x PWM fitarwa | ||
| 7x GPIO | ||
| Abubuwan shigarwar 8x ADC tare da VREF daban | ||
| Murata® 1DX Wi-Fi®/Bluetooth® Module | Wi-Fi® 802.11b/g/n 65 Mbps | |
| Bluetooth® 5.1 BR/EDR/LE | ||
| NXP® SE050C2 Crypto |
Sharuɗɗan gama gari EAL 6+ an ba da izini har zuwa matakin OS | |
| Ayyukan RSA & ECC, tsayin maɓalli mai tsayi da ƙwanƙolin hujja na gaba, kamar su kwakwalwa, Edwards, da Montgomery | ||
| AES & 3DES boye-boye da yankewa | ||
| HMAC, CMAC, SHA-1, SHA-224/256/384/512 ayyuka | ||
| HKDF, MIFARE® KDF, PRF (TLS-PSK) | ||
| Goyan bayan manyan ayyukan TPM | ||
| Amintaccen ƙwaƙwalwar mai amfani da filasha har zuwa 50kB | ||
| I2C bawa (Yanayin-Mai girma, 3.4Mbit/s), I2C master (Yanayin sauri, 400 kbit/s) | ||
| SCP03 (rufin bas da rufaffen shaidar shaidar allurar akan matakin applet da dandamali) | ||
| ROHM Saukewa: BD71847AMWV PMIC mai shirye-shirye |
Dynamic voltage scaling | |
| 3.3V/2A voltage fitarwa zuwa allon ɗauka | ||
| Zazzabi iyaka | -45°C zuwa +85°C | Hakin mai amfani ne kaɗai ya gwada aikin hukumar a cikin cikakken kewayon zafin jiki |
| Bayanin aminci | Darasi A | |
Hukumar
Aikace-aikace Examples
An ƙera Arduino® Portenta X8 don babban aiki da aka haɗa da aikace-aikacen kwamfuta a hankali, dangane da quad core NXP® i.MX 8M Mini Processor. Sigar sigar Portenta tana ba da damar amfani da garkuwa da yawa don faɗaɗa kan aikin sa.
Linux Embedded: Ka fara tura masana'antu 4.0 tare da Fakitin Tallafi na Hukumar Linux wanda ke gudana akan fasalin cike da ingantaccen makamashi Arduino® Portenta X8. Yi amfani da sarkar kayan aikin GNU don haɓaka hanyoyin magance ku daga kullewar fasaha.
Babban aikin sadarwar aiki: Arduino® Portenta X8 ya haɗa da haɗin Wi-Fi® da Bluetooth® don yin hulɗa tare da kewayon na'urorin waje da cibiyoyin sadarwa masu samar da sassauci mai yawa. Bugu da ƙari, Gigabit Ethernet interface yana ba da babban sauri da ƙarancin latency don mafi yawan buƙatar aikace-aikace.
Haɓaka haɓaka haɓaka mai girma na zamani: Arduino® Portenta X8 babban naúrar ne don haɓaka kewayon mafita na al'ada. Babban mai haɗawa yana ba da dama ga ayyuka da yawa, gami da haɗin PCIe, CAN, SAI da MIPI. A madadin, yi amfani da yanayin yanayin Arduino na allunan ƙwararru da aka ƙera azaman tunani don ƙirar ku. Lowcode soware kwantena suna ba da izinin turawa cikin sauri.
Na'urorin haɗi (Ba'a Haɗe)
- USB-C® Hub
- USB-C® zuwa Adaftar HDMI
Samfura masu dangantaka
- Arduino® Portenta Breakout Board (ASX00031)
Rating
Sharuɗɗan Aiki da aka Shawarar
| Alama | Bayani | Min | Buga | Max | Naúrar |
| VIN | Shigar da kunditage daga VIN pad | 4.5 | 5 | 5.5 | V |
| VUSB | Shigar da kunditage daga kebul na USB | 4.5 | 5 | 5.5 | V |
| V3V3 | 3.3V fitarwa zuwa aikace-aikacen mai amfani | 3.1 | V | ||
| Farashin 3V3 | 3.3V fitarwa na yanzu akwai don aikace-aikacen mai amfani | – | – | 1000 | mA |
| VIH | Shigar da babban matakin voltage | 2.31 | – | 3.3 | V |
| VIL | Shigar da ƙaramin matakin voltage | 0 | – | 0.99 | V |
| Babban darajar IOH | Yanzu a VDD-0.4 V, an saita fitarwa mai girma | 8 | mA | ||
| IOL Max | A halin yanzu a VSS+0.4 V, an saita fitarwa ƙasa ƙasa | 8 | mA | ||
| VOH | Fitarwa high voltage, 8m a | 2.7 | – | 3.3 | V |
| VOL | Fitarwa low voltage, 8m a | 0 | – | 0.4 | V |
Amfanin Wuta
| Alama | Bayani | Min | Buga | Max | Naúrar |
| PBL | Amfanin wuta tare da madauki mai aiki | 2350 | mW | ||
| PLP | Yin amfani da wutar lantarki a cikin ƙarancin wutar lantarki | 200 | mW | ||
| PMAX | Matsakaicin Amfani da Wuta | 4000 | mW |
Amfani da tashar USB 3.0 mai dacewa zai tabbatar da cewa an cika buƙatun na yanzu na Portenta X8. Ƙwaƙwalwar sikeli mai ƙarfi na raka'o'in lissafin Portenta X8 na iya canza yawan amfani na yanzu, yana haifar da haɓakawa na yanzu yayin haɓakawa. An samar da matsakaicin amfani da wutar lantarki a cikin teburin da ke sama don yanayin tunani da yawa.
Aiki Ya Ƙareview
Tsarin zane
Cibiyar Topology
7.1 Gaba View
| Ref. | Bayani | Ref. | Bayani |
| U1 | BD71847AMWV i.MX 8M Mini PMIC | U2 | MIMX8MM6CVTKZAA i.MX 8M Mini Quad IC |
| U4 | NCP383LMUAJAATXG Canjin Wutar Lantarki na Yanzu | U6 | ANX7625 MIPI-DSI/DPI zuwa USB Type-C® Bridge IC |
| U7 | MP28210 Mataki Down IC | U9 | LBEE5KL1DX-883 WLAN+Bluetooth® Combo IC |
| U12 | PCMF2USB3B/CZ Bidirectional EMI Kariya IC | U16, U21, U22, U23 | FXL4TD245UMX 4-Bit Bidirectional Voltage-level Translator IC |
| U17 | DSC6151HI2B 25MHz MEMS Oscillator | U18 | DSC6151HI2B 27MHz MEMS Oscillator |
| U19 | NT6AN512T32AV 2GB LP-DDR4 DRAM | IC1, IC2, IC3, IC4 | SN74LVC1G125DCKR 3-jihar 1.65-V zuwa 5.5-V buffer IC |
| Saukewa: PB1 | PTS820J25KSMTRLFS Sake saitin Tura Button | DL1 | KPHHS-1005SURCK Ikon Akan SMD LED |
| Farashin DL2 | SMLP34RGB2W3 RGB Common Anode SMD LED | Y1 | CX3225GB24000P0HPQCC 24MHz crystal |
| Y3 | DSC2311KI2-R0012 Dual-Fitarwa MEMS Oscillator | J3 | CX90B1-24P USB Type-C® mai haɗawa |
| J4 | U.FL-R-SMT-1(60) Mai Haɗin UFL |
7.2 Baya View
| Ref. | Bayani | Ref. | Bayani |
| U3 | Saukewa: LM66100DCKR | U5 | FEMDRW016G 16GB eMMC Flash IC |
| U8 | KSZ9031RNXIA Gigabit Ethernet Transceiver IC | U10 | FXMA2102L8X Dual Supply, 2-Bit Voltage Translator IC |
| U11 | SE050C2HQ1/Z01SDZ IoT Secure Element | U12, U13, U14 | PCMF2USB3B/CZ Bidirectional EMI Kariya IC |
| U15 | NX18P3001UKZ Bidirectional ikon sauya IC | U20 | STM32H747AII6 Dual ARM® Cortex® M7/M4 IC |
| Y2 | SIT1532AI-J4-DCC-32.768E 32.768KHz MEMS Oscillator IC | j1, j2 | Manyan masu haɗin kai |
| Q1 | 2N7002T-7-F N-Channel 60V 115mA MOSFET |
Mai sarrafawa
Arduino Portenta X8 yana amfani da rukunin sarrafa jiki na tushen ARM® guda biyu.
8.1 NXP® i.MX 8M Mini Quad Core Microprocessor
MIMX8MM6CVTKZAA iMX8M (U2) yana fasalta quad core ARM® Cortex® A53 yana gudana har zuwa 1.8 GHz don manyan aikace-aikacen aiki tare da ARM® Cortex® M4 da ke gudana har zuwa 400 MHz. ARM® Cortex® A53 yana da ikon gudanar da cikakken tsarin aiki na Linux ko Android ta hanyar Fakitin Tallafi na Board (BSP) a cikin salo iri-iri. Ana iya faɗaɗa wannan ta amfani da na'urorin soware na musamman ta hanyar sabunta OTA. ARM® Cortex® M4 yana da ƙarancin amfani da wutar lantarki wanda ke ba da damar sarrafa bacci na gaba da kuma ingantaccen aiki a aikace-aikacen ainihin lokaci kuma an tanada shi don amfani na gaba. Dukansu na'urori biyu za su iya raba duk kayan aiki da albarkatun da ake samu akan i.MX 8M Mini, gami da PCIe, ƙwaƙwalwar kan-chip, GPIO, GPU da Audio.
8.2 STM32 Dual Core Microprocessor
X8 ya ƙunshi H7 da aka saka a cikin sigar STM32H747AII6 IC (U20) tare da dual core ARM® Cortex® M7 da ARM® Cortex® M4. Ana amfani da wannan IC azaman mai faɗaɗa I/O don NXP® i.MX 8M Mini (U2). Ana sarrafa na'urori ta atomatik ta hanyar M7 core. Bugu da ƙari, M4 core yana samuwa don sarrafa lokaci na injuna da sauran injunan lokaci mai mahimmanci a matakin ƙasusuwa. M7 core yana aiki azaman matsakanci tsakanin mahaɗai da i.MX 8M Mini kuma yana gudanar da firmware na mallakar mallakar mai amfani. STM32H7 ba a fallasa shi zuwa hanyar sadarwa kuma yakamata a tsara shi ta i.MX 8M Mini (U2).
Haɗin Wi-Fi®/Bluetooth®
Murata® LBEE5KL1DX-883 module mara waya (U9) a lokaci guda yana ba da haɗin haɗin Wi-Fi® da Bluetooth® a cikin ƙaramin ƙaramin kunshin dangane da Cypress CYW4343W. IEEE802.11b/g/n Wi-Fi® dubawa za a iya sarrafa shi azaman wurin samun dama (AP), tasha (STA) ko azaman yanayi biyu lokaci guda AP/STA kuma yana goyan bayan matsakaicin adadin canja wuri na 65 Mbps. Bluetooth® dubawa yana goyan bayan Bluetooth® Classic da Bluetooth® Low Energy. Haɗe-haɗen kewayawa na eriya yana ba da damar eriyar waje ɗaya (J4 ko ANT1) don rabawa tsakanin Wi-Fi® da Bluetooth®. Module U9 musaya tare da i.MX 8M Mini (U2) ta hanyar 4bit SDIO da UART interface. Dangane da tarin soware na tsarin mara waya a cikin Linux OS, ana tallafawa Bluetooth® 5.1 tare da Wi-Fi® wanda ya dace da ma'aunin IEEE802.11b/g/n.
Abubuwan Tunawa na Kan Jirgin
Arduino® Portenta X8 ya ƙunshi nau'ikan ƙwaƙwalwar ajiya guda biyu. A NT6AN512T32AV 2GB LP-DDR4 DRAM (U19) da 16GB Forsee eMMC Flash module (FEMDRW016G) (U5) ana iya samun dama ga i.MX 8M Mini (U2).
Capabilities na Crypto
Arduino® Portenta X8 yana ba da damar matakin tsaro na matakin IC gefen-zuwa-girgije ta guntuwar NXP® SE050C2 Crypto (U11). Wannan yana ba da Sharuɗɗan gama gari EAL 6+ takardar shedar tsaro har zuwa matakin OS, haka kuma RSA/ECC tallafin algorithm na ƙirƙira da ajiyar sahihanci. Yana hulɗa tare da NXP® i.MX 8M Mini ta I2C.
Gigabit Ethernet
NXP® i.MX 8M Mini Quad ya haɗa da 10/100/1000 Ethernet mai sarrafawa tare da goyan bayan Energy Effeicient Ethernet (EEE), Ethernet AVB, da IEEE 1588. Ana buƙatar mai haɗin jiki na waje don kammala dubawa. Ana iya samun damar wannan ta hanyar babban mai haɗawa mai yawa tare da bangaren waje kamar allon Arduino® Portenta Breakout.
Mai haɗa USB-C®
Mai haɗin USB-C® yana ba da zaɓuɓɓukan haɗin kai da yawa akan mahaɗin jiki guda ɗaya:
- Samar da wutar lantarki a cikin yanayin DFP da DRP
- Ikon tushe zuwa na'urorin waje lokacin da ake kunna allo ta hanyar VIN
- Bayyana Babban Gudun (480 Mbps) ko Cikakken Gudun (12 Mbps) Mai watsa shiri na Na'ura na USB
- Nuna Nunin fitarwa na DisplayPort Ana iya amfani dashi tare da kebul na USB kuma ana iya amfani dashi tare da adaftar kebul mai sauƙi lokacin da aka yi amfani da jirgi ta hanyar VIN ko tare da dongles waɗanda ke iya ba da wuta ga allo yayin fitar da DisplayPort da USB a lokaci guda. Irin waɗannan dongles yawanci suna ba da ethernet akan tashar USB, tashar USB mai tashar jiragen ruwa 2 da tashar USB-C® da za a iya amfani da ita don samar da wutar lantarki ga tsarin.
Real Time Clock
Agogon Real Time yana ba da damar kiyaye lokacin rana tare da ƙarancin wutar lantarki.
Itace Power
BD71847AMWV IC (U1) ne ke yin sarrafa wutar lantarki.
Aikin hukumar
16.1 Farawa - IDE
Idan kana son shirya Arduino® Portenta X8 naka yayin kan layi kana buƙatar shigar da Arduino® IDE Desktop [1] Don haɗa sarrafa Arduino® Portenta X8 zuwa kwamfutarka, kuna buƙatar kebul na Type-C® USB. Wannan kuma yana ba da iko ga allon, kamar yadda LED ya nuna.
16.2 Farawa - Arduino Web Edita
Duk allunan Arduino®, gami da wannan, suna aiki a waje akan Arduino® Web Edita [2], ta hanyar shigar da plugin mai sauƙi kawai. Arduino® Web Ana gudanar da edita akan layi, saboda haka koyaushe zai kasance na zamani tare da sabbin abubuwa da goyan baya ga duk allunan. Bi [3] don fara codeing akan mashigin yanar gizo kuma loda zane-zanen ku akan allo.
16.3 Farawa - Arduino IoT Cloud
Duk samfuran da aka kunna Arduino® IoT ana tallafawa akan Arduino® IoT Cloud wanda ke ba ku damar Shiga, tsarawa da tantance bayanan firikwensin, jawo abubuwan da suka faru, da sarrafa gidanku ko kasuwancin ku.
16.4 Sampda Sketches
SampZa a iya samun zane-zane na Arduino® Portenta X8 ko dai a cikin “Examples” menu a cikin Arduino® IDE ko a cikin sashin “Takardu” na Arduino Pro webshafin [4]
16.5 Albarkatun Kan layi
Yanzu da kuka bi ƙa'idodin abin da za ku iya yi tare da hukumar za ku iya bincika yuwuwar da ba ta da iyaka da take bayarwa ta hanyar duba ayyuka masu ban sha'awa akan Project Hub [5], Rubutun Laburare na Arduino® [6] da kantin sayar da kan layi [7] inda za ku iya haɗa allonku da na'urori masu auna firikwensin, masu kunnawa da ƙari.
16.6 farfadowa da na'ura
Duk allunan Arduino suna da ginanniyar bootloader wanda ke ba da damar walƙiya allon ta USB. Idan zane ya kulle na'ura mai sarrafawa kuma allon ba a iya samun shi ta hanyar USB yana yiwuwa a shigar da yanayin bootloader ta hanyar daidaita maɓallin DIP.
Lura: Ana buƙatar allo mai jituwa mai jituwa tare da masu sauya DIP (misali Portenta Max Carrier ko Portenta Breakout) don kunna yanayin bootloader. Ba za a iya kunna shi tare da Portenta X8 kadai ba.
Bayanin Injiniya
Pinout
Hawan Ramuka da Bayanin allo
Takaddun shaida
| Takaddun shaida | Cikakkun bayanai |
| CE (EU) | TS EN 301489-1 TS EN 301489-1 Farashin EN300328 TS EN 62368-1 Farashin EN62311 |
| WEEE (EU) | Ee |
| RoHS (EU) | 2011/65/(EU) 2015/863/(EU) |
| ISA (EU) | Ee |
| UKCA (Birtaniya) | Ee |
| RCM (RCM) | Ee |
| FCC (Amurka) | ID. Rediyo: Kashi na 15.247 MPE: Sashe na 2.1091 |
| RCM (AU) | Ee |
Sanarwa na Daidaitawa CE DoC (EU)
Muna ayyana ƙarƙashin alhakin mu kaɗai cewa samfuran da ke sama sun dace da mahimman buƙatun ƙa'idodin EU masu zuwa don haka sun cancanci tafiya cikin 'yanci a cikin kasuwannin da suka ƙunshi Tarayyar Turai (EU) da Yankin Tattalin Arziki na Turai (EEA).
Sanarwa na Daidaitawa ga EU RoHS & ISAUTAR 211 01/19/2021
Allolin Arduino suna bin umarnin RoHS 2 2011/65/EU na Majalisar Tarayyar Turai da RoHS 3 Directive 2015/863/EU na Majalisar 4 ga Yuni 2015 kan ƙuntata amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da lantarki.
| Abu | Matsakaicin iyaka (ppm) |
| Kai (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl) phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Keɓancewa : Ba a da'awar keɓancewa.
Al'amuran Arduino sun cika cikar buƙatun da ke da alaƙa na Dokokin Tarayyar Turai (EC) 1907/2006 game da Rijista, Ƙimar, Izini da Ƙuntata Sinadarai (ISA). Ba mu bayyana ko ɗaya daga cikin SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Jerin abubuwan da ke da matukar damuwa don ba da izini a halin yanzu da EHA ta fitar, yana nan a cikin duk samfuran (da kuma kunshin) a cikin adadi mai yawa a cikin taro daidai ko sama da 0.1%. A iyakar saninmu, muna kuma bayyana cewa samfuranmu ba su ƙunshi kowane abu daga cikin abubuwan da aka jera akan "Jerin Izini" (Annex XIV na ka'idojin REACH) da Abubuwan da ke da matukar damuwa (SVHC) a cikin kowane adadi mai mahimmanci kamar yadda aka ƙayyade. ta Annex XVII na jerin 'yan takara da ECHA (Hukumar Sinadarai ta Turai) ta buga 1907/2006/EC.
Sanarwar Ma'adinan Rikici
A matsayin mai ba da kayayyaki na duniya na kayan lantarki da na lantarki, Arduino yana sane da wajibcinmu game da dokoki da ka'idoji game da Ma'adinan Rikici, musamman Dodd-Frank Wall Street Reform and Consumer Protection Act, Sashe na 1502. Arduino ba ya samo asali ko aiwatar da rikici kai tsaye. ma'adanai irin su Tin, Tantalum, Tungsten, ko Zinariya. Ma'adanai masu rikice-rikice suna ƙunshe a cikin samfuranmu a cikin nau'in siyar, ko a matsayin wani sashi a cikin kayan haɗin ƙarfe. A matsayin wani ɓangare na ƙwazonmu mai ma'ana Arduino ya tuntuɓi masu samar da kayan aiki a cikin sarkar kayan mu don tabbatar da ci gaba da bin ƙa'idodin. Dangane da bayanan da muka samu zuwa yanzu mun bayyana cewa samfuranmu sun ƙunshi ma'adanai masu rikice-rikice waɗanda aka samo daga wuraren da babu rikici.
FCC Tsanaki
Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba
- Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
FCC RF Bayanin Bayyana Radiation:
- Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
- Wannan kayan aikin ya dace da iyakokin fiddawa na RF wanda aka tsara don muhalli mara sarrafawa.
- Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20cm tsakanin radiyo & jikin ku.
Lura: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke da'ira daban-daban daga abin da aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako
Littattafan mai amfani don na'urar rediyon da ba ta da lasisi za ta ƙunshi sanarwa mai zuwa ko makamancinta a cikin wani fili a cikin littafin jagorar mai amfani ko a madadin na'urar ko duka biyun. Wannan na'urar ta dace da ma'auni(s) na RSS na masana'antar Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama ba
- Dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.
Gargaɗi na IC SAR:
Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20 cm tsakanin radiyo da jikinka.
Na'urar rediyo mai ɗauke da da'ira na dijital wanda zai iya aiki daban da aikin mai watsawa ko abin da ke da alaƙa, zai bi ICES-003. A irin waɗannan lokuta, buƙatun lakabi na madaidaitan RSS suna aiki, maimakon buƙatun lakabi a cikin ICES-003. Wannan na'urar dijital ta Class B ta dace da ICES-003 na Kanada.
Wannan mai watsa rediyo [IC: 26792-ABX00049] Innovation, Kimiyya da Ci gaban Tattalin Arziki Kanada sun amince da shi don aiki tare da nau'ikan eriya da aka jera a ƙasa, tare da madaidaicin ƙimar da aka nuna. Nau'in eriya waɗanda ba a haɗa su cikin wannan jeri ba waɗanda ke da riba sama da matsakaicin riba da aka nuna don kowane nau'in da aka jera an haramta su don amfani da wannan na'urar.
| Mai kera Eriya | Molex |
| Antenna Model | WIFI 6E Flex Cable Side-Fed Eriya |
| Nau'in Antenna | Eriyar dipole ta omnidirectional na waje |
| Antenna Gain: | 3.6 dBi |
Muhimmi: Yanayin aiki na EUT ba zai iya wuce 85 ℃ ba kuma kada ya kasance ƙasa da -45 ℃.
Ta haka, Arduino Srl ya bayyana cewa wannan samfurin ya dace da mahimman buƙatu da sauran tanadin da suka dace na Jagoran 201453/EU. An ba da izinin amfani da wannan samfurin a duk ƙasashe membobin EU.
| Makadan mitar | Matsakaicin ƙarfin fitarwa (EIRP) |
| 2402-2480 MHz (EDR) | 12.18 dBm |
| 2402-2480 MHz (BLE) | 7.82 dBm |
| 2412-2472 MHz (2.4G Wifi) | 15.99 dBm |
Bayanin Kamfanin
| Sunan kamfani | Arduino SRL |
| Adireshin Kamfanin | Ta hanyar Andrea Appiani, 25 - 20900 MONZA (Italiya) |
Takardun Magana
| Ref | mahada |
| Arduino IDE (Desktop) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (Cloud) | https://create.arduino.cc/editor |
| Cloud IDE Ana Farawa | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web-editor- 4b3e4a |
| Arduino Pro Website | https://www.arduino.cc/pro |
| Cibiyar Aikin | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Maganar Laburare | https://github.com/arduino-libraries/ |
| Shagon Kan layi | https://store.arduino.cc/ |
Canja Log
| Kwanan wata | Canje-canje |
| 07/12/2022 | Bita don takaddun shaida |
| 30/11/2022 | Ƙarin bayani |
| 24/03/2022 | Saki |
Arduino® Portenta X8
Gyara: 07/12/2022
Takardu / Albarkatu
 |
ARDUINO ABX00049 Haɗaɗɗen Hukumar Ƙimar [pdf] Littafin Mai shi ABX00049 2AN9S-ABX00049 |
