ProPlex Codeclock Timecode Display thiab Distribution Device

Tshajview

TMB tso cai rau nws cov neeg siv khoom rub tawm thiab luam tawm phau ntawv luam tawm hluav taws xob no rau kev siv tshaj lij xwb.
TMB txwv tsis pub luam tawm, hloov kho lossis faib cov ntaub ntawv no rau lwm lub hom phiaj, yam tsis muaj kev tso cai sau ntawv.
TMB muaj kev ntseeg siab rau qhov tseeb ntawm cov ntaub ntawv cov ntaub ntawv hauv no tab sis xav tias tsis muaj lub luag haujlwm lossis kev lav phib xaub rau ib qho kev poob uas tshwm sim los ntawm qhov tsis ncaj lossis tsis ncaj los ntawm kev ua yuam kev lossis tsis suav nrog txawm tias yog kev sib tsoo lossis lwm yam ua rau.

KHOOM PLIG

Lub ProPlex CodeClock yog ib tug tswv cuab ntawm peb LTC Device system, uas yog tsim los tsim, faib thiab saib xyuas timecode. Peb cov rugged, compact mini-enclosure tsim yog zoo meej rau desktop programmers pov rau hauv lub hnab thaum kuj tseem hloov tau txaus los nruab rau hauv khib nrog ib qho kev xaiv RackMount Kit. Nrog rau kev xaiv xim xim ntawm qhov huv si dot-matrix zaub, CodeClock yog lub cuab yeej zoo tshaj plaws los synchronize thiab saib xyuas cov sijhawm teev sijhawm.

MAIN NTA

• Loj RGB LED matrix moos qhia lub sijhawm thiab hloov xim nyob ntawm qhov xwm txheej
• Tau txais timecode dhau LTC (XLR3), MIDI (DIN), lossis USB MIDI
• Redistributes xaiv timecode hla LTC cov zis
• 3x Neutrik XLR3 outputs yog transformer-isolated thiab muaj adjustable theem (-18dBu rau +6dBu)
• OLED tswj vaj huam sib luag nrog rau cov neeg siv khoom siv tau yooj yim thiab cov duab waveform
• Built-in timecode generator muaj peev xwm khiav ntawm txhua tus qauv qauv
• Compact, hnav, rugged, txhim khu kev qha. Backpack tus phooj ywg
• Muaj cov khoom siv rackmount xaiv
• Powered ntawm USB-C. Cable retainer tiv thaiv kev tsis sib haum xeeb

TXOJ CAI

PART NUMBERS	PROUDCT npe
PPCODECLME	PROPLEX CODECLOCK TIMECODE Device
PP 1 RKITS	PROPLEX 1U RACKMOUNT KIT, me me, ib leeg
PP1RMKITSD	PROPLEX 1U RACKMOUNT KIT, ME, DUAL
PP1RMKITS + MD	PROPLEX 1U DUAL COMBINATION SMALL + MEDIUM

QHOV TSEEBVIEW

TAG NRHO DIMENSIONAL WIREFRAME DRAWINGS

SETUP

Kev Tiv Thaiv Kev Nyab Xeeb

Thov nyeem cov lus qhia no kom zoo.
Cov neeg siv phau ntawv qhia no muaj cov ntaub ntawv tseem ceeb txog kev teeb tsa, kev siv, thiab kev saib xyuas ntawm cov khoom no

• Xyuas kom lub cuab yeej txuas nrog kom raug voltage, thiab kab voltage tsis siab tshaj qhov uas tau teev tseg hauv cov cuab yeej tshwj xeeb
• Xyuas kom tseeb tias tsis muaj cov ntaub ntawv flammable nyob ze ntawm lub tsev thaum ua haujlwm
• Ib txwm siv ib qho kev ruaj ntseg cable thaum dai fixture overhead
• Ib txwm txiav tawm ntawm lub zog hluav taws xob ua ntej kev pabcuam lossis hloov fuse (yog tias tsim nyog)
• Qhov siab tshaj plaws ambient kub (Ta) yog 40 ° C (104 ° F). Tsis txhob ua haujlwm ntawm qhov kub siab tshaj qhov ntsuas no
• Thaum muaj teeb meem kev khiav hauj lwm loj, nres siv lub tsev tam sim ntawd. Kev kho yuav tsum tau ua los ntawm cov kws cob qhia, cov neeg ua haujlwm tau tso cai. Hu rau lub chaw pabcuam kev pabcuam uas nyob ze tshaj plaws. Tsuas yog OEM cov khoom seem yuav tsum tau siv
• Tsis txhob txuas lub cuab yeej mus rau lub pob dimmer
• Xyuas kom tseeb tias lub hwj chim qaum yeej tsis crimped los yog puas
• Tsis txhob txiav lub hwj chim qaum los ntawm rub lossis rub rau ntawm txoj hlua

CEEB TOOM! Tsis muaj cov neeg siv khoom siv tau nyob hauv chav tsev. Tsis txhob qhib lub tsev lossis sim kho koj tus kheej. Thaum tsis zoo li koj lub tsev yuav xav tau kev pabcuam, thov saib cov ntaub ntawv pov thawj tsawg kawg ntawm daim ntawv no

UNPACKING
Thaum tau txais ntawm chav tsev, ua tib zoo tshem lub thawv thiab xyuas cov ntsiab lus kom ntseeg tau tias txhua qhov chaw nyob thiab zoo. Qhia rau tus neeg xa khoom tam sim ntawd thiab khaws cov khoom ntim rau kev tshuaj xyuas yog tias ib qho twg zoo li puas los ntawm kev xa khoom lossis yog tias lub thawv nws tus kheej pom cov cim ntawm kev ua yuam kev. Txuag lub thawv thiab tag nrho cov khoom ntim. Yog hais tias ib chav tsev yuav tsum tau xa rov qab mus rau lub Hoobkas, nws yog ib qho tseem ceeb uas yuav tsum tau xa rov qab rau hauv lub Hoobkas thawj lub thawv thiab ntim khoom.

YUAV UA LI CAS 

• ProPlex CodeClock
• USB-C Cable
• Cable retainer clamp
• QR Code downloads daim npav

KEV PAB CUAM
Lub ProPlex CodeClock yog siv los ntawm USB-C cable txuas nrog txhua tus qauv 5 VDC phab ntsa charger lossis lub khoos phis tawj USB Chaw nres nkoj nrog cable retainer yog threaded inserts uas txuas rau USB-C cable. Nws muab qee qhov kev ntxhov siab thiab pab tiv thaiv kev tsis sib haum xeeb

INSTALLATION

Lub ProPlex CodeClock enclosure tau tsim los nrog tus programmer ncig xyuas hauv siab. Peb xav kom cov khoom siv no ua lub teeb yuag, ntim tau thiab stackable - yog li peb haum lawv nrog cov roj hmab loj loj kom lawv nyob ruaj khov ntawm ntau qhov chaw
Cov chav no kuj tau sib xws nrog Cov Khoom Siv Me Me RackMount yog tias lawv yuav tsum tau nruab ib nrab mus tas li rau cov ntawv thov ncig xyuas

RACKMOUNT INSTALLATION cov lus qhia

ProPlex RackMount Cov Khoom Siv muaj rau ob qho tib si Ib-Unit thiab Dual-Unit mounting configurations
Txhawm rau txhawm rau txhawm rau pob pob ntseg lossis cov neeg koom nrog rau ProPlex PortableMount chassis, koj yuav tsum tshem tawm ob lub chassis screws ntawm txhua sab ntawm lub hauv ntej ntawm lub chassis. Cov ntsia hlau qub no yog siv los txhawm rau txhawm rau RackMount pob ntseg thiab cov neeg koom nrog rau lub chassis
Rau kev teeb tsa ob chav tsev, ob qho tib si ntawm pem hauv ntej thiab nram qab chassis screws yuav siv

TSEEM CEEB: Nco ntsoov rov ntxig cov ntsia hlau rau hauv chav tsev tom qab lub pob ntseg raug tshem tawm. Khaws Cov Khoom Siv RackMount hauv qhov chaw nyab xeeb kom txog thaum xav tau dua. Cov khoom seem muaj nyob ntawm TMB yog tias xav tau

RACKMOUNT INSTALLATION cov lus qhia
Cov Khoom Siv Ib Leeg Me Me RackMount yog muaj ob lub pob ntseg khib, ib qho ntev thiab ib qho luv. Daim duab hauv qab no qhia txog kev ua tiav ntawm RackMount Kit. Cov pob ntseg khib no yog tsim los ua symmetrical, kom lub pob ntseg luv thiab ntev tuaj yeem hloov pauv tau.

Cov Khoom Siv Dual-Unit Small RackMount muaj ob lub pob ntseg luv luv ntxiv rau ob tus neeg koom nrog. Daim duab hauv qab no qhia txog kev ua tiav ntawm RackMount Kit. Qhov kev teeb tsa no yuav tsum muaj OB qhov chaw koom nrog txuas ntawm ob sab pem hauv ntej thiab nram qab

INSTALLING DUAL JOINERS
Cov Khoom Siv Dual-Unit Small RackMount suav nrog FOUR txuas txuas thiab FOUR countersunk tiaj tus taub hau screws. Cov kev sib txuas no yog tsim los ua zes rau hauv ib leeg thiab tau ruaj ntseg nrog cov screws thiab threaded qhov.
Txhua qhov txuas txuas yog tib yam. Tsuas yog tig qhov kev sib txuas sib txuas thiab kab hauv qhov kev teeb tsa los nruab rau ntawm sab laug lossis sab xis ntawm cov chav sib txuas.

Kev ua haujlwm

Lub ProPlex CodeBride tuaj yeem teeb tsa tau yooj yim nrog lub onboard OLED zaub thiab cov nyees khawm navigation nyob rau pem hauv ntej ntawm chav tsev.

MENU MAP

TSEV KAWM NTAWV
Lub CodeClock muaj 2 HOME SCREENS uas tso saib qhov sib txawv ntawm cov sijhawm xa tuaj. Lub voj voog nruab nrab ntawm cov ntxaij vab tshaus no los ntawm nias ib qhokhawm

Tsev Screen 1
Cov hom ntawv thiab tus nqi ntawm cov sij hawm xa tuaj tuaj qhia nyob rau sab saum toj ntawm lub vijtsam nrog rau qhov tseem ceeb tam sim no.
Oscillogram thiab voltage theem bar hauv qab qhia theem teeb liab los ntawm LTC qhov chaw tsuas yog tuaj

Nco tseg: Qhov zoo tshaj plaws LTC hauv chav yuav tsum zoo li lub voj voog square nrog cov zis siab. Yog tias qib qis dhau, sim ua kom qhov ntim ntawm qhov chaw los txhim kho lub teeb liab

Tsev Screen 2
Lub vijtsam no qhia txog txhua qhov chaw ntawm lub sijhawm uas CodeClock tuaj yeem ntes tau
Qhov twg los xij uas suav tias yog siv tau yuav raug qhia nrog lub ntsej muag tom qab

Lub ntsiab lus qhia

Lub Main Menu tuaj yeem nkag tau los ntawm nias lub khawm thiab feem ntau ntawm cov kev xaiv tuaj yeem tawm ntawm qhov khawm
Scroll nrog lub khawm thiab paub meej tias xaiv nrog lub khawm.

Nco tseg: Tsis yog txhua cov ntawv qhia zaub mov yuav haum rau ntawm lub vijtsam ntaus ntawv yog li koj yuav tsum tau txav mus rau qee cov ntawv qhia zaub mov. Sab xis ntawm feem ntau cov ntawv qhia zaub mov yuav tso saib ib qho scroll bar uas yuav pab qhia qhov tob ntawm scroll navigation

LTC tso zis hom
Qhia li cas LTC timecode raug xa rov qab
Hom Passive: Cov LTC nkag los yog lub cev txuas nrog LTC OUT cov chaw nres nkoj los ntawm kev xa tawm thiab cov teeb liab tsis hloov pauv
Hom tsis nquag: LTC timecode tau rov tsim dua lub sijhawm thiab theem teeb liab
Siv ces kom paub meej tias xaiv nrog rau khawm kom voj voog ntawm hom. Qhov taw qhia hnub asterisk yuav qhia txog qib kev tso zis tam sim noTimecode Generator
Lub CodeClock tuaj yeem ua kom huv, siab tso tawm LTC tawm ntawm peb qhov chaw nres nkoj XLR3 (nyob rau tom qab ntawm txhua chav)
Siv cov khawm, ces paub meej tias xaiv nrog lub khawm kom voj voog ntawm ntau lub tshuab hluav taws xob xaiv

Hom ntawv: Xaiv ntawm cov qauv kev lag luam sib txawv FPS tus nqi 23.976, 24, 25, 29.97ND, 29.97DF, thiab 30 FPS
Pib Sijhawm: Qhia lub sijhawm pib ntawm HH:MM:SS:FF siv cov nyees khawm navigation
Cov ntaub ntawv siv: qhia cov neeg siv cov ntaub ntawv hauv 0x00000000 hex hom Ua Si, Ncua Sijhawm, Rov Qab: cov neeg siv kev ua si rov qab rau cov sijhawm tsim tawm.

Nco tseg: koj yuav tsum nyob twj ywm ntawm qhov screen no kom tsis tu ncua siv lub tshuab hluav taws xob LTC. Yog tias koj tawm ntawm qhov screen no, lub tshuab hluav taws xob yuav nres tau txais, thiab qhov chaw tam sim no yuav hloov mus rau qhov chaw nquag tom ntej

Screen Brightness
Muaj 4 qhov teeb tsa Brightness rau ntu zaub:

TAG NRHO HIGH NORMAL LOW
Siv cov khawm, ces paub meej tias nrog cov khawm xaiv ntawm ntau qib. Qhov taw qhia hnub qub yuav qhia txog qib kev tshuaj ntsuam tam sim no

Cov zis theem
Boost lossis txiav cov zis theem ntawm +6 dBu rau -12 dBu. Txhua yam kev tso tawm ntawm ob lub chaw nres nkoj XLR3 raug cuam tshuam los ntawm kev hloov qib no. Qhov no suav nrog:

• Generator tso zis
• Rov xa cov timecode tawm tswv yim los ntawm lwm cov khoom siv

Siv cov khawm, ces paub meej tias nrog cov khawm xaiv ntawm ntau theem tso zis. Qhov taw qhia hnub asterisk yuav qhia txog qib kev tso zis tam sim no

Moos Xim
Lub CodeClock tso cai rau tus neeg siv los hloov kho cov xim ntawm RGB ntu lossis siv peb 'auto' zaub
Siv cov khawm, ces paub meej tias nrog cov khawm xaiv ntawm ob hom xim. Qhov taw qhia hnub qub yuav qhia txog hom kev xaiv tam sim no

Auto Xim: Lub moos xim yuav hloov xim xim nyob ntawm lub xeev ntawm lub teeb liab

Xim Ntsiab:

Xim Xim
Tus neeg siv tuaj yeem kho cov xim RGB nrog tus lej hex

• Siv xaiv thiab highlight ib tug lej, ces nias kom paub meej tias xaiv
• Ces siv hloov tus nqi (los ntawm 0-F) thiab nias rov cawm.
• Thaum koj hloov tus nqi, koj yuav tsum pom lub moos xim siv zog hloov hauv cov lus teb rau koj qhov hloov
• RGB siv qhov tseem ceeb yog sawv cev los ntawm hom: 0x (r-value) (g-tus nqi) (b-tus nqi)
• Qhov twg 0xF00 yog tag nrho liab, 0x0F0 yog tag nrho ntsuab thiab 0x00F yog tag nrho xiav
• Thaum cov xim xav tau tshwm sim, teeb lub OK khawm ntawm qhov screen thiab nias cawm

Pre-roll Frames
Pre-roll yog tus naj npawb ntawm cov thav ntawv siv tau los xav txog lub sijhawm sijhawm kom siv tau thiab pib xa mus rau cov khoom tawm

Siv cov khawm kom pom tus nqi Pre-roll, ces nias khawm hloov
Siv cov khawm kom teeb tsa Pre-yob ntas (1-30) thiab rau txuag tus nqi
Nco tseg: Cov kwj dej nquag yuav ib txwm qhia cov LTC cov kwj tawm los ntawm 1st tau txais ncej, tsis hais txog Pre-roll nqis

Cov ntaub ntawv ntaus ntawv
Device Info qhia cov ntaub ntawv xwm txheej ntawm chav tsev.
Cov ntaub ntawv nthuav tawm yog:
Ntaus lub npe
FWJ version
FW Build date
Xovxwm tawm mus

Cov Khoom Kho Khoom Siv Kho Dua
Siv cov khawm kom pom YES, ces nias khawm kom nkag mus rau hauv Bootloader hom. Lub CodeClock screen yuav tsum tso ib daim ntawv rau
"Siv USB los hloov kho firmware" qhia rau koj paub tias nws yog npaj txhij
Tam sim no lub cuab yeej yuav tsum teb rau cov hloov tshiab xa los ntawm Tiva Programmer software - mus saib tmb.com ua los yog email techsupport@tmb.com rau cov ntaub ntawv hais txog kev hloov tshiab tam sim no thiab cov lus qhia ntxiv
Nco tseg: Nyob rau hauv cov ntaub ntawv ntawm nkag mus rau hauv lub bootloader yuam kev, koj yuav tsum tau lub hwj chim voj voog lub cuab yeej tawm thiab rov qab mus rau ib txwm ua hauj lwm

Kev ua haujlwm Passive
CodeClock muaj peev xwm ua haujlwm passive, qhov twg tsis xav tau lub zog
kom dhau LTC los ntawm kev tawm tswv yim mus rau cov zis. Peb tsim CodeClock kom txhua qhov tso zis siv ib qho kev sib cais transformer los pab tswj kev ua haujlwm tsis zoo.
Kev rho tawm yuav pab kom tsis txhob muaj cov voj voog hauv av thiab lwm yam teeb meem teeb meem suab nrov ntawm lub hauv paus thiab tus txais, thiab ntawm cov neeg txais.
Txawm li cas los xij, qhov kev siv ntawm cov transformers no qhia txog qhov attenuation (insertion poob) rau lub teeb liab ntawm <1dB raug rau 2dB max.

Qhov kev poob qis ntxiv no feem ntau tsis tseem ceeb thiab yuav tsum tsis muaj teeb meem rau feem ntau. Tab sis yog tias LTC teeb liab qis pib nrog, ces lub teeb liab yuav txo qis mus rau theem uas nws tsis ua haujlwm.

Cov lus pom zoo kom txo qis

Peb ib txwm pom zoo kom muaj lub taub hau zoo thaum ua haujlwm nrog timecode. LTC yuav tsum tsis txhob yog sinusoidal zoo li suab - theej, nws yog ib tug digital teeb liab uas yog encoded nyob rau hauv lub square suab yoj
Thaum pom LTC, koj feem ntau xav pom qhov siab-amplitude square-wave nrog ntxhab ascents
Ib qho tseem ceeb sib txawv ntawm lub suab thiab LTC yog cov teeb liab uas tau txais. Ib qho "clipped" lossis overloaded teeb liab feem ntau yog ib yam dab tsi uas yuav tsum tsis txhob nyob rau hauv cov suab paj nruag, tab sis tej zaum nws yuav tsim nyog rau qhov tseeb LTC timecode synchronization
Lub hom phiaj yog kom muaj LTC nkag los ntawm 0dBu (775mV), uas kuj yog qhov kev tso tawm ua ntej rau CodeClock nquag thiab lwm yam LTC tsev neeg cov khoom siv.
Yog tias LTC cov teeb liab tuaj tsawg, koj yuav tsum tau txhawb nqa qib ntawm daim npav suab hauv lub kaw lus. Ntau npaum li cas yuav nyob ntawm qhov chaw

Laptop suab card

• Ua-nyob rau hauv lub suab laptop suab phaib feem ntau tsis sib npaug thiab feem ntau xav tau lub adapter los ntawm mini-jack rau XLR - qhov no ua rau poob ib ncig- 10dBu (316mV)
• Nws yog ib qho tseem ceeb kom muaj PC ntim ntawm 100% kom tsis txhob muaj teeb meem sync nrog tau txais

Professional suab phaib

• Cov khoom siv Pro feem ntau muaj cov zis ntau dua - feem ntau 70-80% txaus rau kev ua haujlwm ib txwm nrog LTC

Qhov kev pom zoo zaum kawg yog ib txwm siv cov khoom siv hluav taws xob zoo thiab cov khoom siv hluav taws xob. Cov kab hluav taws xob puas lossis cov khoom hloov pauv tuaj yeem ua rau tsis muaj teeb meem ntau dua thiab ua rau muaj teeb meem nrog LTC stability

Kev tu thiab tu

Plua plav tsim nyob rau hauv cov chaw nres nkoj txuas tuaj yeem ua rau muaj teeb meem kev ua haujlwm thiab tuaj yeem ua rau muaj kev puas tsuaj ntxiv thaum hnav thiab tsim kua muag.
CodeClock cov cuab yeej xav tau kev tu ib ntus kom tswj tau qhov kev ua tau zoo tshaj plaws, tshwj xeeb tshaj yog cov khoom siv hauv ib puag ncig hnyav

Cov hauv qab no yog cov lus qhia dav dav ntawm kev ntxuav:

• Ib txwm txiav tawm ntawm lub hwj chim ua ntej sim ua kev ntxuav
• Tos kom txog thaum chav tsev txias thiab tawm tag nrho ua ntej ntxuav
• Siv lub tshuab nqus tsev los yog cov cua qhuav kom tshem tawm cov plua plav / khib nyiab hauv thiab ib puag ncig cov khoom sib txuas
• Siv cov ntaub so ntswg los yog txhuam los so thiab buff lub chassis lub cev
• Txhawm rau ntxuav lub vijtsam navigation, siv cov cawv isopropyl nrog cov ntaub so ntswg los yog cov paj rwb dawb
• Cawv ncoo thiab q-cov lus qhia yuav pab tshem tawm cov grime thiab residue ntawm cov nyees khawm navigation

TSEEM CEEB:
Nco ntsoov tias txhua qhov chaw qhuav ua ntej sim rov siv dua

TECHNICAL SPECIFICATIONS

Tshooj Naj Npawb	PPCODECLME
Fais fab Connector	USB-C Connector nrog cable retainer los tiv thaiv kev sib tsoo fais fab tuag. Kuj xa thiab tau txais USB MIDI.
MIDI Input Connector	DIN 5-Pin Poj Niam
MIDI tso zis Connector	DIN 5-Pin Poj Niam
LTC Input Connector	Neutrik™ Combination 3-Pin XLR thiab 1/4 "TRS poj niam
LTC tso zis Connectors	Neutrik™ 3-Pin XLR Txiv neej
Kev Ua Haujlwm Voltage	5 VDC
Kev siv fais fab	4.5 W Max.
Kev khiav hauj lwm Temp.	TBA
Dimensions (HxWxD)	1.72 x 7.22 x 4.42 po [43.7 x 183.5 x 112.3 mm]
Qhov hnyav	1.4 lbs ib. [0.64 Kg]
Shipping Nyhav	1.6 lbs ib. [0.73 Kg]

LIMITED WARRANTY INFORMATION

ProPlex Data Distribution Devices raug lees paub los ntawm TMB tiv thaiv cov khoom siv tsis raug lossis kev ua haujlwm rau lub sijhawm ob (2) xyoo txij li hnub pib muag los ntawm TMB.
TMB qhov kev lees paub yuav tsum txwv rau kev kho lossis hloov ntawm ib qho twg uas ua pov thawj tias muaj qhov tsis zoo thiab qhov kev thov raug xa mus rau TMB ua ntej tas sijhawm ntawm lub sijhawm lav.

Qhov Kev Tiv Thaiv Txwv Tsis Pub Tshaj Tawm no yog void yog tias qhov tsis xws luag ntawm cov khoom yog tshwm sim los ntawm:

• Qhib lub casing, kho, lossis hloov kho los ntawm lwm tus neeg uas tsis yog TMB lossis cov neeg tshwj xeeb tau tso cai los ntawm TMB
• Kev raug mob, kev tsim txom lub cev, kev siv tsis raug, lossis kev siv cov khoom tsis raug.
• Kev puas tsuaj los ntawm xob laim, av qeeg, dej nyab, kev ua phem, kev ua tsov ua rog, lossis kev ua ntawm Vajtswv.

TMB yuav tsis ua lub luag haujlwm rau kev siv nyiaj ua haujlwm, lossis cov khoom siv, los hloov thiab / lossis kho cov khoom yam tsis muaj TMB tau ntawv tso cai ua ntej. Ib qho kev kho ntawm cov khoom lag luam hauv thaj teb, thiab cov nqi ua haujlwm cuam tshuam, yuav tsum tau tso cai ua ntej los ntawm TMB. Cov nqi thauj khoom ntawm kev tiv thaiv kev kho yog cais 50/50: Cov neeg siv khoom them nyiaj xa khoom tsis raug rau TMB; TMB them rau nkoj kho khoom, thauj khoom hauv av, rov qab rau Cov Neeg Siv Khoom.
Qhov kev lees paub no tsis suav nrog kev puas tsuaj lossis cov nqi ntawm txhua yam.

Daim Ntawv Tso Cai Xa Khoom Rov Qab (RMA) Tus Naj Npawb yuav tsum tau txais los ntawm TMB ua ntej xa rov qab cov khoom lag luam tsis zoo rau kev lav lossis kho tsis tau lav. Yog xav paub ntxiv txog kev kho, thov hu rau TMB ntawm email ntawm TechSupport@tmb.com los yog xov tooj ntawm ob peb qhov chaw hauv qab no:

TMB US
527 Park Ave.
San Fernando, CA 91340 NWS

Tebchaws Meskas
Xov tooj: +1 818.899.8818
TMB UK
21 Armstrong Txoj Kev
Southall, UB2 4SD

England
Tel: +44 (0) 20.8574.9700
Koj tseem tuaj yeem tiv tauj TMB ncaj qha los ntawm email ntawm TechSupport@tmb.com

Rov qab txheej txheem

Thov hu rau TMB thiab thov daim pib kho thiab xa rov qab Daim Ntawv Tso Cai Muag Khoom Ua ntej xa khoom mus kho. Npaj los muab tus qauv naj npawb, serial tooj, thiab cov lus piav qhia luv luv ntawm qhov ua rau xa rov qab nrog rau qhov chaw nyob xa rov qab thiab cov ntaub ntawv tiv tauj. Thaum daim pib kho tau tiav lawm, RMA # thiab cov lus qhia rov qab yuav raug xa los ntawm email rau kev tiv tauj file.

Kom meej meej sau cov pob khoom xa tuaj nrog ATTN: RMA#. Thov xa rov qab cov khoom siv them ua ntej thiab hauv cov ntim khoom thaum twg ua tau. TSIS TXHOB suav nrog cables lossis accessories (tshwj tsis yog qhia lwm yam). Yog tias tsis muaj cov ntim khoom qub, nco ntsoov ntim kom zoo thiab tiv thaiv txhua yam khoom siv. TMB tsis muaj lub luag haujlwm rau kev thauj khoom puas tsuaj los ntawm kev ntim khoom tsis txaus los ntawm tus xa khoom.

Freight hu tags yuav tsis raug xa tawm rau kev kho tsheb thauj mus los rau TMB, tab sis TMB yuav them tus nqi thauj khoom xa rov qab rau tus neeg siv khoom yog tias qhov kho tau tsim nyog rau kev pabcuam warranty. Kev kho tsis muaj kev lav phib xaub yuav dhau los ua cov txheej txheem hais los ntawm tus kws tshaj lij uas tau muab rau kev kho. Tag nrho cov nqi cuam tshuam rau cov khoom, kev ua haujlwm thiab xa rov qab yuav tsum tau tso cai sau ua ntej ua haujlwm tiav.

TMB muaj txoj cai siv nws tus kheej txiav txim siab los kho lossis hloov cov khoom thiab txiav txim siab txog qhov lav ntawm txhua yam khoom siv.

Tiv tauj xov xwm

LOS ANGELES HEADQUARTERS

527 Park Avenue | San Fernando, CA 91340, USA Tel: +1 818.899.8818 | Fax: +1 818.899.8813 sales@tmb.com

TMB 24/7 TECH SUPPORT
Teb Chaws Asmeskas/Canada: +1.818.794.1286
Tus Hu Dawb: 1.877.862.3833 (1.877.TMB.DUDE) UK: +44 (0) 20.8574.9739
Tus Hu Dawb: 0800.652.5418
techsupport@tmb.com

LOS ANGELES +1 818.899.8818 LONDON +44 (0)20.8574.9700 NEW YORK +1 201.896.8600 BEIJING +86 10.8492.1587 CANADA +1 5198.5818. ib 8886

Lub tuam txhab kev pabcuam tag nrho muab kev txhawb nqa kev pabcuam, kev pabcuam rau cov neeg siv khoom, thiab ua raws.
Muab cov khoom lag luam thiab kev pabcuam rau kev lag luam, kev lom zem, kev tsim vaj tsev, kev teeb tsa, kev tiv thaiv, tshaj tawm, kev tshawb fawb, kev sib txuas lus, thiab kev lag luam kos npe.Servicing thoob ntiaj teb kev lag luam los ntawm cov chaw ua haujlwm hauv Los Angeles, London, New York, Toronto, Riga thiab Beijing.

www.tmb.com ua

Cov ntaub ntawv / Cov ntaub ntawv

ProPlex Codeclock Timecode Display thiab Distribution Device [ua pdf] Tus neeg siv phau ntawv Codeclock Timecode Display thiab Distribution Device, Timecode Display and Distribution Device, Display and Distribution Device, Distribution Device

Cov ntaub ntawv

• Cov neeg siv phau ntawv