ProPlex Codeclock Timecode Display and Distribution Device
Kuphelileview
I-TMB igunyaza amakhasimende ayo ukulanda futhi aphrinte le manuwali eshicilelwe nge-elekthronikhi ukuze isetshenziswe ngochwepheshe kuphela.
I-TMB iyakwenqabela ukukhiqizwa kabusha, ukuguqulwa noma ukusatshalaliswa kwalo mbhalo nganoma yiziphi ezinye izinjongo, ngaphandle kwemvume ebhaliwe ecacile.
I-TMB iyakwethemba ukunemba kolwazi lwedokhumenti lapha kodwa ayithwesi mthwalo noma isibopho sanoma yikuphi ukulahlekelwa okwenzeke njengomphumela oqondile noma ongaqondile wamaphutha noma ukukhishwa okungaba ngengozi noma nganoma yisiphi isizathu.
INCAZELO YOMKHIQIZO
The ProPlex CodeClock is a member of our LTC Device system, which is designed to generate, distribute and monitor timecode. Our rugged, compact mini-enclosure design is perfect for desktop programmers to throw in bag while also being flexible enough to install in a rack with an optional RackMount Kit. With custom color selection on a clean dot-matrix display, the CodeClock is the ultimate tool to synchronize and monitor timecode streams.
IZICI EZIYINHLOKO
- Large RGB LED matrix clock displays time and changes color depending on status
- Receives timecode over LTC (XLR3), MIDI (DIN), or USB MIDI
- Redistributes selected timecode over LTC outputs
- 3x Neutrik XLR3 outputs are transformer-isolated and have adjustable level (-18dBu to +6dBu)
- OLED control panel with an intuitive user interface and waveform display
- Built-in timecode generator capable of running at any standard framerate
- Iqinile, ilula, iqinile, ithembekile. I-backpack inobungane
- Izinketho ezitholakalayo zekhithi ye-rackmount
- Powered via USB-C. Cable retainer prevents accidental disconnection
UKU-ODA AMAKHODI
| IZINOMBOLO ZENGXENYE | IGAMA LEPROUDCT |
| PPCODECLME | PROPLEX CODECLOCK TIMECODE DEVICE |
| I-PP1RMKITSS | PROPLEX 1U RACKMOUNT KIT, SMALL, SINGLE |
| PP1RMKITSD | PROPLEX 1U RACKMOUNT KIT, SMALL, DUAL |
| PP1RMKITS+MD | I-PROPLEX 1U DUAL COMBINATION SMALL + MEDIUM |
IMODEL FUTHIVIEW
IMIDLALO EPHELELE YE-DIMENSIONAL WIREFRAME
SETHA
Izinyathelo Zokuphepha
Sicela ufunde le miyalo ngokucophelela.
Lo mhlahlandlela womsebenzisi uqukethe ulwazi olubalulekile mayelana nokufakwa, ukusetshenziswa, nokugcinwa kwalo mkhiqizo
- Qinisekisa ukuthi idivayisi ixhunywe kuvolumu efaneletage, kanye nalowo mugqa voltagi-e ayiphezulu kunaleyo eshiwo ekucacisweni kwedivayisi
- Qinisekisa ukuthi azikho izinto ezivuthayo eduze neyunithi ngenkathi usebenza
- Ngaso sonke isikhathi sebenzisa ikhebula lokuphepha lapho ulenga impahla phezulu
- Nqamula njalo emthonjeni wamandla ngaphambi kokusevisa noma ukufaka esikhundleni se-fuse (uma kusebenza)
- Izinga lokushisa eliphezulu le-ambient (Ta) ngu-40°C (104°F). Ungayisebenzisi iyunithi emazingeni okushisa angaphezu kwalesi silinganiso
- Uma kwenzeka kuba nenkinga enkulu yokusebenza, yeka ukusebenzisa iyunithi ngokushesha. Ukulungisa kufanele kwenziwe ngabasebenzi abaqeqeshiwe, abagunyaziwe. Xhumana nesikhungo esiseduze sosizo lobuchwepheshe esigunyaziwe. Izingxenye ezisele ze-OEM kuphela okufanele zisetshenziswe
- Ungaxhumi idivayisi kuphekhi ye-dimmer
- Qiniseka ukuthi intambo kagesi ayiboli noma ilimale
- Ungalokothi unqamule intambo yamandla ngokudonsa noma ukudonsa intambo
ISEXWAYISO! There are no user-serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please see the limited warranty information at the end of this document
UKUKHIPHA
Lapho uthola iyunithi, qaqa ibhokisi ngokucophelela futhi uhlole okuqukethwe ukuze uqinisekise ukuthi zonke izingxenye zikhona futhi zisesimweni esihle. Yazisa umthumeli ngokushesha futhi ugcine impahla yokupakisha ukuze ihlolwe uma kukhona izingxenye ezibonakala zilimele ekuthunyelweni noma uma ibhokisi ngokwalo libonisa izimpawu zokungaphathwa kahle. Londoloza ikhathoni nazo zonke izinto zokupakisha. Uma iyunithi kufanele ibuyiselwe efekthri, kubalulekile ukuthi ibuyiselwe ebhokisini lemboni yokuqala kanye nokupakishwa.
OKUHLANGANISIWE
- ProPlex CodeClock
- Ikhebula le-USB-C
- Isigcini sekhebula clamp
- Ikhadi lokulanda Ikhodi ye-QR
IZIDINGO ZAMANDLA
The ProPlex CodeClock is powered via USB-C cable connected to any standard 5 VDC wall charger or computer USB port The included cable retainer is a threaded insert which attaches to the USB-C cable. It provides some strain relief and helps prevent accidental disconnection
UKUFAKA
The ProPlex CodeClock enclosure was designed with the touring programmer in mind. We wanted these devices to be lightweight, packable and stackable – so we fitted them with oversized rubber feet to keep them stationary on most surfaces
These units are also compatible with Small RackMount Kits should they need to be semi-permanently mounted for touring applications
I-RACKMOUNT INSTALLATION IMIYALELO
ProPlex RackMount Kits are available for both Single-Unit and Dual-Unit mounting configurations
To fasten the rack ears or joiners to the ProPlex PortableMount chassis, you must remove the two chassis screws on each side at the front of the chassis. These same screws are used to securely fasten the RackMount ears and joiners to the chassis
For dual-unit configurations, both sets of front and rear chassis screws will be used
KUBALULEKILE: Be sure to reinsert the screws into the unit after ears have been removed. Store RackMount Kit in a safe location until needed again. Spare screws are available from TMB if needed
I-RACKMOUNT INSTALLATION IMIYALELO
I-Single-Unit Small RackMount Kit iqukethe amadlebe amabili e-rack, EYODWA yinde kanye NEYODWA emfushane. Umdwebo ongezansi ubonisa ukufakwa okuqediwe kwe-RackMount Kit. Lezi zindlebe ze-rack zenzelwe ukulinganisa, ukuze izindlebe ezimfishane nezinde zikwazi ukushintshaniswa.
I-Dual-Unit Small RackMount Kit inamadlebe ama-rack AMABILI amafushane kanye nezihlanganisi AMABILI. Umdwebo ongezansi ubonisa ukufakwa okuqediwe kwe-RackMount Kit. Lokhu kulungiselelwa kudinga izihlanganisi AMABILI ezimaphakathi ezinamathiselwe ngaphambili nangemuva
UKUFAKA AMAJOYINA AMABILI
The Dual-Unit Small RackMount Kit includes FOUR joining links and FOUR countersunk flat head screws. These links are designed to nest into each other and are secured with the included screws and threaded holes.
Each link piece is identical. Simply rotate the joining link and line up the installation holes to install on either the left or right side of the corresponding unit.
UKUSEBENZA
I-ProPlex CodeBride ingacushwa kalula ngesibonisi se-OLED esisebhodini nezinkinobho zokuzula ezingaphambili kweyunithi.
IMEPHU YEMENU
IKHAYA LESIHLA
The CodeClock has 2 HOME SCREENS that display different parameters of incoming timecode streams. Cycle between these screens by pressing either the
inkinobho
Isikrini Sasekhaya 1
The formats and rates of incoming timecode streams show at the top of the screen with the current active source highlighted.
The Oscillogram and voltage level bar underneath indicate signal level from incoming LTC source only
Qaphela: Ideally the LTC IN steam should resemble a square wave with high output level. If level is too low, try increasing the volume at the source to improve the signal
Isikrini Sasekhaya 2
This screen displays all sources of timecode that the CodeClock can detect
Whichever source is considered active will be highlighted with a blinking background
Imenyu Eyinhloko
I-Main Menu ingafinyelelwa ngokucindezela i 
button and majority of options can be exited via the
inkinobho
Scroll with the inkinobho bese uqinisekisa ukukhetha nge inkinobho.
Qaphela: Akuwona wonke amamenyu azongena esikrinini sedivayisi ngakho-ke uzodinga ukuskrola ukuze ufinyelele amanye amamenyu. Uhlangothi olungakwesokudla lwezikrini eziningi zemenyu luzobonisa ibha yokuskrola ezosiza ukukhombisa ukujula kokuzulazula kokuskrola
LTC Output Mode
Indicates how LTC timecode is redistributed
Imodi yokwenziwa: Incoming LTC is physically connected to LTC OUT ports through relay and signal is not altered
Imodi esebenzayo: LTC timecode has regenerated timing and signal level
Sebenzisa then to confirm selection with the button to cycle between modes. The asterisk indicator will denote the currently selected output level
Ijeneretha yekhodi yesikhathi
The CodeClock can generate clean, high output LTC out of the three isolated XLR3 ports (located on the rear of each unit)
Sebenzisa i- inkinobho, bese uqinisekisa ukukhetha nge inkinobho yokujikeleza phakathi kwezinketho ezihlukene zamajeneretha
Ifomethi: Select between different industry standard FPS rates 23.976, 24, 25, 29.97ND, 29.97DF, and 30 FPS
Isikhathi sokuqala: Specify a start time of HH:MM:SS:FF using navigation buttons
Idatha Yomsebenzisi: specify user data in 0x00000000 hex format Play, Pause, Rewind: user playback controls for generated timecode.
Qaphela: kufanele uhlale kulesi sikrini ukuze usebenzise ngokuqhubekayo ijeneretha ye-LTC. Uma uphuma kulesi sikrini, ijeneretha izoma ngokuzenzakalelayo, futhi umthombo wamanje uzoshintsha uye emthonjeni olandelayo osebenzayo
Ukukhanya Kwesikrini
There are 4 Brightness settings for the segment display:
FULL HIGH NORMAL LOW
Sebenzisa i- button, then confirm with the button to choose between the various levels. The asterisk indicator will denote the current screen level
Izinga Lokukhiphayo
Boost or cut the output level from +6 dBu to -12 dBu. Everything outputting via the two isolated XLR3 ports is affected by this level change. This includes:
- Okukhipha i-generator
- Aphinde adluliselwe amafomethi ekhodi yesikhathi asuka kokunye okokufaka
Sebenzisa i- button, then confirm with the button to choose between the various output levels. The asterisk indicator will denote the currently selected output level
Umbala Wewashi
The CodeClock allows the user to customize the display color of the RGB segments or use our ‘auto’ display
Sebenzisa i- button, then confirm with the button to choose between the two color modes. The asterisk indicator will denote the currently selected mode
Umbala Ozenzakalelayo: Clock color will change the display color depending on the state of the signal
Ukhiye Wombala:
Umbala Ongokwezifiso
User can customize the RGB color with hex digit values
- Sebenzisa to select and highlight a digit, then press ukuqinisekisa ukukhetha
- Bese usebenzisa to change value (from 0-F) and press futhi ukusindisa.
- As you alter the value, you should see the clock color intensity change in response to your edit
- RGB intensity values are represented by the format: 0x (r-value) (g-value) (b-value)
- Where 0xF00 is full red, 0x0F0 is full green and 0x00F is full blue
- When the desired color is displayed, highlight the OK button on screen and press zokonga
I-Pre-roll Frames
I-Pre-roll inombolo yozimele abavumelekile abadingekayo ukuze kucatshangelwe ukuthi umthombo wekhodi yesikhathi uvumelekile futhi uqale ukuwudlulisela kokuphumayo.
Sebenzisa i-
button to highlight the Pre-roll value, then press the button to edit
Sebenzisa i- button to set the Pre-roll frames (1-30) and to save the value
Qaphela: Active streams will always show the incoming LTC stream starting from the 1st received frame, regardless of Pre-roll settings
Ulwazi Lwedivayisi
Device Info displays status information of the unit.
The information displayed is:
Igama Ledivayisi
Uhlobo lwe-FW
FW Build date
Cindezela ukuphuma
Isibuyekezi seFirmware
Sebenzisa i- button to highlight YES, then press the button to enter Bootloader mode. The CodeClock screen should display a note to
“Use USB to Update Firmware” to let you know it is ready
Now the device should respond to updates sent from the Tiva Programmer software – visit tmb.com noma i-imeyili techsupport@tmb.com for information on currently available updates and further instructions
Qaphela: In the case of entering the bootloader accidentally, you must power cycle the device to exit and return to normal operation
I-Passive Operation
CodeClock is capable of passive operation, where no power is needed
to pass LTC through from the input to the outputs. We designed CodeClock so that each output uses an isolation transformer to help stabilize passive operation.
Isolation helps to avoid ground loops and other potential signal noise issues between the source and receiver, and among receivers.
However, the implementation of these transformers introduces an attenuation (insertion loss) to the signal at < 1dB typical to 2dB max
This additional signal level loss is normally insignificant and should cause no issue in most cases. BUT if the LTC signal was low to begin with, then the signal might attenuate to a level where it stops working.
Attenuation Recommendations
We always recommended having good headroom when working with timecode. LTC should not be sinusoidal like audio – rather, it is a digital signal that is encoded in a square audio wave
When visualizing LTC, you would generally want to see a high-amplitude square-wave with steep ascents
One fundamental difference between audio and LTC is the acceptable signal level. A “clipped” or overloaded signal is usually something to avoid in audio signals, but it may actually be necessary for accurate LTC timecode synchronization
The goal is to have incoming LTC at 0dBu (775mV), which is also the default output level for active CodeClock and the other LTC family devices
If the incoming LTC signal is low, you may need to boost the level of the sound card in the system. How much may depend on the source
Laptop sound cards
- Built-in sound laptop sound cards are usually unbalanced and often require an adapter from mini-jack to XLR – this results in loss around- 10dBu (316mV)
- It is essential to have PC volume at 100% to avoid sync issues with receives
Professional sound cards
- Pro equipment generally has a much higher output level – usually 70-80%is sufficient for normal operation with LTC
The final recommendation is to always use high-quality cables and adapters. Damaged cables or adapters can unintentionally cause more signal attenuation and lead to issues with LTC stability
UKUHLANZA KANYE NONDLO
Dust build-up in connector ports can cause performance issues and can potentially lead to further damage during normal wear and tear
CodeClock devices need occasional cleaning to maintain best performance, especially units used in harsher environmental conditions
OKULANDELAYO IMIHLAHLANDLELA EJWAYELEKILE YOKUHLANZA:
- Njalo nqamula amandla ngaphambi kokuzama noma yikuphi ukuhlanza
- Linda kuze kube yilapho iyunithi selipholile futhi selikhishwe ngokuphelele ngaphambi kokuhlanza
- Sebenzisa i-vacuum noma umoya ocindezelwe owomile ukuze ususe uthuli/imfucumfucu phakathi nezixhumi ezizungezile
- Sebenzisa ithawula elithambile noma ibhulashi ukuze usule futhi ubhuqe umzimba we-chassis
- Ukuze uhlanze isikrini sokuzulazula, sebenzisa utshwala be-isopropyl ngesicubu sokuhlanza ilensi ethambile noma ukotini wamahhala
- Amaphedi otshwala namathiphu angasiza ekususeni noma yikuphi ukungcola nezinsalela ezinkinobho zokuzulazula
KUBALULEKILE:
Qiniseka ukuthi zonke izindawo zomile ngaphambi kokuzama ukuvula amandla futhi
IMICIMBI YOBUCHWEPHESHE
| Inombolo Yengxenye | PPCODECLME |
|
Isixhumi Samandla |
USB-C Connector with cable retainer to prevent accidental power disconnection. Also transmits and receives USB MIDI. |
| Isixhumi Sokufaka se-MIDI | I-DIN 5-Pin Owesifazane |
| I-MIDI Output Connector | I-DIN 5-Pin Owesifazane |
| Isixhumi Sokufaka se-LTC | I-Neutrik™ Combination 3-Pin XLR kanye ne-1/4” TRS female |
| Izixhumi Zokukhiphayo ze-LTC | I-Neutrik™ 3-Pin XLR Male |
| I-Operating Voltage | 5 VDC |
| Ukusetshenziswa kwamandla | 4.5 W Ubukhulu. |
| ITemp Esebenzayo. | I-TBA |
| Ubukhulu (HxWxD) | 1.72 x 7.22 x 4.42 kokuthi [43.7 x 183.5 x 112.3 mm] |
| Isisindo | 1.4 lbs. [0.64kg] |
| Isisindo Sokuthumela | 1.6 lbs. [0.73kg] |
ULWAZI LWEQINISO LOKUKHAWULWA
I-ProPlex Data Distribution Devices iqinisekiswa yi-TMB ngezinto ezingasebenzi kahle noma ukwenziwa kwayo isikhathi esiyiminyaka emibili (2) kusukela ngedethi yokuthengiswa kwangempela yi-TMB.
Iwaranti ye-TMB izoba kuphela ekulungiseni noma ekufakweni esikhundleni kwanoma iyiphi ingxenye ebonakala inephutha futhi lapho isimangalo sithunyelwa kwa-TMB ngaphambi kokuphela kwesikhathi esisebenzayo sewaranti.
Lesi Siqiniseko Esikhawulelwe asisebenzi uma ububi boMkhiqizo kuwumphumela:
- Ukuvula ikesi, ukulungisa, noma ukulungiswa yinoma ubani ngaphandle kwe-TMB noma abantu abagunyazwe ngokukhethekile i-TMB
- Ingozi, ukuhlukunyezwa ngokomzimba, ukungaphathwa kahle, noma ukusetshenziswa kabi komkhiqizo.
- Umonakalo ngenxa yombani, ukuzamazama komhlaba, uzamcolo, ubuphekula, impi, noma isenzo sikaNkulunkulu.
I-TMB ngeke ithwale isibopho sanoma yimuphi umsebenzi osetshenzisiwe, noma izinto ezisetshenziswayo, ukuze kushintshwe futhi/noma kulungiswe uMkhiqizo ngaphandle kokugunyazwa okubhaliwe kwangaphambili kwe-TMB. Noma yikuphi ukulungiswa koMkhiqizo endaweni, kanye nanoma yiziphi izindleko eziphathelene nomsebenzi, kufanele kugunyazwe kusengaphambili yi-TMB. Izindleko zempahla ekulungisweni kwewaranti zihlukaniswa ngama-50/50: Ikhasimende likhokha ukuhambisa umkhiqizo onokukhubazeka ku-TMB; I-TMB ikhokhela ukuthunyelwa komkhiqizo olungisiwe, impahla ethunyelwa phansi, ibuyiselwe kuKhasimende.
Lesi siqinisekiso asibandakanyi umonakalo olandelanayo noma izindleko zanoma yiluphi uhlobo.
I-Return Merchandise Authorization (RMA) Inombolo kufanele itholwe kwa-TMB ngaphambi kokubuyiselwa kwanoma yikuphi okuthengiswayo okonakalayo ukuze kulungiswe iwaranti noma okungekhona iwaranti. Ngemibuzo yokulungisa, sicela uthinte i-TMB nge-imeyili kokuthi TechSupport@tmb.com noma ushayele ucingo kwenye yezindawo zethu ezingezansi:
TMB US
527 Park Ave.
I-San Fernando, CA 91340
I-united states
Ucingo: +1 818.899.8818
TMB UK
21 Indlela ye-Armstrong
I-Southall, UB2 4SD
ENgilandi
Ucingo: +44 (0)20.8574.9700
You may also contact TMB directly via email at TechSupport@tmb.com
INKQUBO YOKUBUYELA
Sicela uthinte i-TMB futhi ucele ithikithi lokulungisa kanye neNombolo Yokugunyazwa Yokubuyisela Ngaphambi Kokuthumela izinto eziyokhandwa. Zilungiselele ukunikeza inombolo yemodeli, inombolo ye-serial, nencazelo emfushane yembangela yembuyiselo kanye nekheli lokuthumela elibuyayo kanye nolwazi lokuxhumana. Uma ithikithi lokulungisa selicutshunguliwe, i-RMA # kanye nemiyalelo yokubuyisela izothunyelwa nge-imeyili koxhumana naye file.
Clearly label any shipping package(s) with ATTN: RMA#. Please return equipment prepaid and in the original packaging whenever possible. DO NOT include cables or accessories (unless advised otherwise). If original packaging is not available, be sure to properly pack and protect any equipment. TMB is not liable for any shipping damage resulting from inadequate packaging by the sender.
Freight call tags will not be issued for shipping repairs to TMB, but TMB will pay the freight for return to the customer if the repair qualifies for warranty service. Non-warranty repairs will undergo a quotation process by the technician assigned to the repair. All associated costs for parts, labor and return shipping must be authorized in writing before any work can be completed.
TMB reserves the right to use its own discretion to repair or replace product(s) and determine the warranty status of any equipment.
ULWAZI LOKUXHUMANA
ENKONDLO YASE-LOS ANGELES
527 Park Avenue | San Fernando, CA 91340, USA Ucingo: +1 818.899.8818 | Ifeksi: +1 818.899.8813 sales@tmb.com
TMB 24/7 UKUSEKELWA KOBUCHWEPHESHE
I-US/Canada: +1.818.794.1286
Inombolo Yamahhala: 1.877.862.3833 (1.877.TMB.DUDE) UK: +44 (0)20.8574.9739
Inombolo Yamahhala: 0800.652.5418
techsupport@tmb.com
LOS ANGELES +1 818.899.8818 LONDON +44 (0)20.8574.9700 NEW YORK +1 201.896.8600 BEIJING +86 10.8492.1587 CANADA +1 519.538.0888 RIGA +371 6389 8886
Inkampani yesevisi egcwele ehlinzeka ngosizo lobuchwepheshe, isevisi yamakhasimende, nokulandelela.
Providing products and services for the industrial, entertainment, architectural, installation, defense, broadcast, research, telecommunications, and signage industries.Servicing the global market from offices in Los Angeles, London, New York, Toronto, Riga and Beijing.
Amadokhumenti / Izinsiza
 |
ProPlex Codeclock Timecode Display and Distribution Device [pdf] Imaniwali yosebenzisayo Codeclock Timecode Display and Distribution Device, Timecode Display and Distribution Device, Display and Distribution Device, Distribution Device |