Kayan aikin PCE PCE-VR 10 Voltage Data Logger
Bayanan aminci
Da fatan za a karanta wannan littafin a hankali kuma gaba ɗaya kafin amfani da na'urar a karon farko. Ƙwararrun ma'aikata ne kawai za a iya amfani da na'urar kuma ma'aikatan PCE Instruments su gyara su. Lalacewa ko raunin da ya haifar ta rashin kiyaye littafin an cire su daga alhakinmu kuma ba garantin mu ya rufe shi ba.
- Dole ne a yi amfani da na'urar kawai kamar yadda aka bayyana a cikin wannan jagorar koyarwa. Idan aka yi amfani da shi in ba haka ba, wannan na iya haifar da yanayi mai haɗari ga mai amfani da lalacewa ga mita.
- Ana iya amfani da kayan aikin ne kawai idan yanayin muhalli (zazzabi, danshi mai dangi,…) suna cikin kewayon da aka bayyana a cikin ƙayyadaddun fasaha. Kada a bijirar da na'urar zuwa matsanancin zafi, hasken rana kai tsaye, matsanancin zafi ko danshi.
- Kada a bijirar da na'urar ga girgiza ko girgiza mai ƙarfi.
- ƙwararrun ma'aikatan PCE Instruments ne kawai ya kamata a buɗe shari'ar.
- Kada kayi amfani da kayan aiki lokacin da hannunka ya jike.
- Kada ku yi wani canje-canje na fasaha ga na'urar.
- Ya kamata a tsaftace kayan aikin tare da talla kawaiamp zane. Yi amfani da tsabtace tsaka-tsaki na pH kawai, babu abrasives ko kaushi.
- Dole ne kawai a yi amfani da na'urar tare da na'urorin haɗi daga PCE Instruments ko makamancin haka.
- Kafin kowane amfani, bincika harka don lalacewar bayyane. Idan kowace lalacewa ta ganuwa, kar a yi amfani da na'urar.
- Kada kayi amfani da kayan a cikin yanayi masu fashewa.
- Ba za a wuce iyakar ma'auni kamar yadda aka bayyana a cikin ƙayyadaddun bayanai ba a kowane hali.
- Rashin kiyaye bayanan aminci na iya haifar da lalacewa ga na'urar da rauni ga mai amfani.
Ba mu ɗauki alhakin buga kurakurai ko wasu kurakurai a cikin wannan littafin ba. Muna nuna ƙayyadaddun sharuɗɗan garantin mu waɗanda za a iya samu a cikin sharuɗɗan kasuwancin mu gabaɗaya. Idan kuna da wasu tambayoyi tuntuɓi Kayan aikin PCE. Ana iya samun bayanan tuntuɓar a ƙarshen wannan littafin.
Aiki
Mai shigar da bayanai zai iya nuna voltages tsakanin kewayon 0 … 3000 mV DC da yin rikodin tashoshi 3 a tazarar ajiya daban-daban.
Ƙayyadaddun bayanai
| Ƙayyadaddun bayanai | Bayani | |
| Kewayon aunawa | 0 … 300 mV DC | 0 … 3000 mV DC |
| Daidaiton aunawa | ± (0.5% + 0.2 mV) | ± (0.5% + 2 mV) |
| Ƙaddamarwa | 0.1 MV | 1 MV |
| Tazarar shiga cikin daƙiƙa | 1, 2, 5, 10, 30, 60, 120, 300, 600, Auto | |
| Rayuwar baturi lokacin shiga kan ƙarfin baturi | kusan 30h a 2 s log tazarar | |
| Ƙwaƙwalwar ajiya | Katin SD har zuwa 16 GB | |
| Nunawa | LCD tare da hasken baya | |
| Nuna ƙimar wartsakewa | 1 s ku | |
|
Tushen wutan lantarki |
6 x 1.5V baturi AAA | |
| Plug-in mains adaftar 9V/0.8 A | ||
| Yanayin aiki | 0 … 50 °C / 32 … 122°F / <85 % RH | |
| Girma | 132 x 80 x 32 mm | |
| Nauyi | kusan 190 g / <1 lb | |
Iyakar bayarwa
- 1 x voltage data logger PCE-VR 10 3 x tashar haɗin kai
- 1 x SD katin ƙwaƙwalwar ajiya
- 1 x bangon bango
- 1 x mannen kushin
- 6 x 1.5V baturi AAA
- 1 x littafin mai amfani
Bayanin tsarin
- 9V DC shigarwar
- Sake saita buɗe maɓalli
- Saukewa: RS232
- Ramin katin SD
- Nunawa
- LOG / Shigar da maɓalli
- Saita maɓallin
- ▼ / Maɓallin wuta
- ▲ / Maɓallin lokaci
- Ramin hawa
- Tsaya
- Bangaren baturi
- Matsakaicin sashin baturi
- Auna shigar tashar 1
- Auna shigar tashar 2
- Auna shigar tashar 3
- Bangon bango
- tashar shigar da ma'aunin haɗi 1
- tashar shigar da ma'aunin haɗi 2
- tashar shigar da ma'aunin haɗi 3
Aiki
Shirye-shiryen aunawa
- Kafin amfani da na'urar a karon farko, saka batura daidai a cikin na'urar kamar yadda aka bayyana a babi na 7. Batura suna da matuƙar mahimmanci don sarrafa agogon ciki lokacin da mitar ke kashe.
- Saka katin SD a cikin ramin katin. Yi tsarin katin kafin amfani da shi a karon farko ko kuma idan wasu na'urori sun tsara katin. Don tsara katin SD, ci gaba kamar yadda aka bayyana a babi 6.7.1
- Kunna naúrar tare da maɓallin "▼ / Power".
- Duba kwanan wata, lokaci, da samplokaci mai tsawo (Log interval).
- Danna maɓallin "▲ / Time" don kimanin. 2 seconds. Ana nuna ƙimar saiti ɗaya bayan ɗaya. Kuna iya canza kwanan wata, lokaci da sampling lokaci kamar yadda aka bayyana a cikin 6.7.2 da 6.7.3
- Tabbatar cewa an saita haruffan goma daidai. Tsohuwar haruffan ƙima shine dige. A Turai, duk da haka, waƙafi na al'ada ne. Idan ba'a saita haruffan goma daidai a cikin ƙasarku ba, wannan na iya haifar da ƙimar da ba daidai ba da rikitarwa lokacin karanta katin ƙwaƙwalwar ajiya. Kuna iya yin saitin kamar yadda aka kwatanta a ƙarƙashin babi na 6.7.5
- Kunna ko kashe maɓalli da sarrafa sautuna kamar yadda aka bayyana a babi 6.7.4
- Kunna ko kashe fitarwar RS232 da aka kwatanta a babi 6.7.6
- Saita iyakar ma'aunin da ake so kamar yadda aka bayyana a babi na 6.8
- Haɗa layin siginar zuwa matosai masu dacewa na abubuwan ma'auni, lura da madaidaicin polarity.
Hankali!
Matsakaicin shigar voltagda 3000mV. Domin mafi girma voltage, voltagDole ne a haɗa mai rabawa a sama!
Nuna bayanai
Katin SD cikakke ne ko mara kyau. Share kuma tsara katin SD. Idan mai nuna alama ya ci gaba da bayyana, maye gurbin katin SD.
Ƙarƙashin matakin baturi Sauya batura.
Babu katin SD da aka saka
- Aunawa / Shiga
- Toshe masu haɗin shigarwar ma'aunin a cikin shigar da tashar tashar da ta dace, lura da polarity daidai.
- Kunna mita tare da maɓallin "▼ / Power".
- Ana nuna ma'auni na yanzu.
- Fara aikin log ɗin
- Don fara logger, danna ka riƙe maɓallin "LOG / Shigar" na 2 seconds. Scan" yana bayyana a taƙaice a ɓangaren sama na nuni azaman tabbaci. "Datalogger" yana bayyana tsakanin nunin tashoshi 2 da 3. Harafin "Datalogger" yana walƙiya kuma ana iya jin sautin sarrafawa a lokacin saita saiti (idan ba a kashe ba).
- Fitar da aikin log
- Don fita aikin log ɗin, danna kuma riƙe maɓallin "LOG / Shigar" na 2 seconds.
- Naúrar tana komawa yanayin aunawa.
- Hasken baya
- Aikin baturi
Danna maɓallin "▼ / Power" don kunna hasken baya na nuni kusan. 6 seconds lokacin da mita ke kunne. - Babban aiki
Danna maɓallin "▼ / Power" don kunna ko kashe hasken baya na nuni lokacin da aka kunna mitar. - Kashe mita da kunnawa
• Idan ya cancanta, cire haɗin adaftar mains na filogi daga mains da mita.
• Danna ka riƙe maɓallin "▼ / Power" na tsawon daƙiƙa 2.
Don sake kunna mita, danna maɓallin "▼ / Power" a taƙaice sau ɗaya.
Ba zai yiwu a kashe mitar ba yayin da ake samar da wutar lantarki ta hanyar adaftar wutar lantarki. - Canja wurin bayanai zuwa PC
• Cire katin SD daga mita lokacin da aikin log ɗin ya ƙare. Hankali!
Cire katin SD yayin da aikin log ɗin ke gudana na iya haifar da asarar bayanai.
Saka katin SD cikin madaidaicin katin SD akan PC ko cikin mai karanta katin SD da aka haɗa da PC.
• Fara shirin maƙunsar bayanai akan PC ɗinku, buɗe file a katin SD, kuma karanta fitar da bayanai - Tsarin katin SD
- Aikin baturi
Ana ƙirƙiri wannan tsari ta atomatik akan katin SD lokacin da aka yi amfani da shi a karon farko ko bayan tsarawa:
- Babban fayil "MVA01
- File "MVA01001" tare da max. 30000 data records
- File "MVA01002" tare da max. 30000 rikodin idan MVA01001 ya cika
- da dai sauransu zuwa “MVA01099
- File "MVA02001" idan MVA01099 ya cika
- da dai sauransu zuwa “MVA10.
Example file 
Saitunan ci gaba
- Tare da kunna mita kuma ba a kunna mai shigar da bayanan ba, danna kuma ka riƙe maɓallin “SET” har sai “Set” ya bayyana akan nunin.
- Tare da maɓallin “SET”, zaku iya kiran zaɓuɓɓukan saiti masu zuwa ɗaya bayan ɗaya.
| Nuna nuni | Aiki | |
| 1 | Sd F | Tsara katin SD |
| 2 | dAt | Saita kwanan wata / lokaci |
| 3 | SP-t | Sampling time / log interval |
| 4 | BEEP | Maɓalli &/ sarrafa sautin kunnawa / kashewa |
| 5 | dEC | Halin adadi . ko , |
| 6 | rS232 | RS 232 fitarwa a kunne / kashe |
| 7 | rng | Ma'auni kewayon 300 mV ko 3000 mV |
Tsara katin SD
- Kewaya zuwa saitunan ci-gaba kamar yadda aka bayyana a sama. Da sauri Sd F yana bayyana akan nuni.
- Yi amfani da maɓallan "▼ / Power" ko "▲ / Time" don zaɓar Ee ko a'a.
- Tabbatar da zaɓi tare da maɓallin "LOG / Shigar".
- Idan ka zaɓi “eh”, dole ne ka sake tabbatar da tambayar tsaro ta latsa maɓallin “LOG/Enter”.
- Danna maɓallin "SET" akai-akai har sai kun koma yanayin aunawa ko jira 5 seconds; sannan mitar zata canza zuwa yanayin aunawa ta atomatik.
Hankali!
Idan ka zaɓi "eh" kuma tabbatar da tambayar tsaro, duk bayanan da ke cikin katin SD za a share su kuma za a sake fasalin katin SD.
Kwanan wata / lokaci
- Kewaya zuwa saitunan ci-gaba kamar yadda aka bayyana a sama.
- Danna maɓallin "SET" akai-akai har sai "dAtE" ya bayyana akan nunin. Bayan ɗan gajeren lokaci, shekara, wata da rana suna bayyana akan nunin.
- Yi amfani da maɓallin "▼ / Power" ko "▲ / Time" don zaɓar shekara ta yanzu kuma tabbatar da shigarwa tare da maɓallin "LOG / Shigar".
- Ci gaba da shigowar wata da yini kamar shigar shekara. Bayan tabbatar da ranar, sa'a, minti da na biyu zasu bayyana akan nunin.
- Ci gaba da waɗannan shigarwar kamar yadda yake tare da shekara, da sauransu.
- Danna maɓallin "SET" akai-akai har sai kun koma yanayin aunawa ko jira 5 seconds; sannan mitar zata canza zuwa yanayin aunawa ta atomatik.
Sampling lokaci / log tazara
- Kewaya zuwa saitunan ci-gaba kamar yadda aka bayyana a sama.
- Danna maɓallin "SET" akai-akai har sai "SP-t" ya bayyana akan nunin.
- Zaɓi tazarar log ɗin da ake so tare da maɓallan "▼ / Power" ko "▲ / Time" kuma tabbatar da shigarwa tare da maɓallin "LOG / Shigar". Ana iya zaɓar waɗannan abubuwa masu zuwa: 1, 2, 5, 10, 30, 60, 120, 300, 600 s da auto.
- Danna maɓallin "SET" akai-akai har sai kun koma yanayin aunawa ko jira 5 seconds; sannan mitar zata canza zuwa yanayin aunawa ta atomatik.
Hankali!
"auto" yana nufin cewa duk lokacin da aka canza ma'auni (> ± 10 lambobi), ana adana ƙimar sau ɗaya. Idan saitin ya kasance 1 seconds, ana iya rasa bayanan mutum ɗaya.
Maɓalli / sarrafa sautunan X
- Kewaya zuwa saitunan ci-gaba kamar yadda aka bayyana a sama. Danna maɓallin "SET" akai-akai har sai "bEEP" ya bayyana akan nunin.
- Yi amfani da maɓallin "▼ / Power" ko "▲ / Time" don zaɓar e ko a'a.
- Tabbatar da zaɓi tare da maɓallin "LOG / Shigar".
- Danna maɓallin "SET" akai-akai har sai kun koma yanayin aunawa ko jira 5 seconds; sannan mitar zata canza zuwa yanayin aunawa ta atomatik.
Halin adadi
- Kewaya zuwa saitunan ci-gaba kamar yadda aka bayyana a sama. Danna maɓallin "SET" akai-akai har sai "dEC" ya bayyana akan nunin.
- Yi amfani da maɓallan "▼ / Power" ko "▲ / Time" don zaɓar "Yuro" ko "Amurka". “Yuro” yayi daidai da waƙafi kuma “Amurka” yayi daidai da digon. A Turai, ana amfani da waƙafi a matsayin jigon ƙima.
- Tabbatar da zaɓi tare da maɓallin "LOG / Shigar".
- Danna maɓallin "SET" akai-akai har sai kun koma yanayin aunawa ko jira 5 seconds; sannan mitar zata canza zuwa yanayin aunawa ta atomatik.
Saukewa: RS232
- Kewaya zuwa saitunan ci-gaba kamar yadda aka bayyana a sama. Danna maɓallin "SET" akai-akai har sai "rS232" ya bayyana akan nunin.
- Yi amfani da maɓallin "▼ / Power" ko "▲ / Time" don zaɓar e ko a'a.
- Tabbatar da zaɓi tare da maɓallin "LOG / Shigar".
- Danna maɓallin "SET" akai-akai har sai kun koma yanayin aunawa ko jira 5 seconds; sannan mitar zata canza zuwa yanayin aunawa ta atomatik.
Kewayon aunawa
- Kewaya zuwa saitunan ci-gaba kamar yadda aka bayyana a sama. Danna maɓallin "SET" akai-akai har sai "rng" ya bayyana akan nunin.
- Yi amfani da maɓallin "▼ / Power" ko "▲ / Time" don zaɓar 300 mV ko 3000 mV.
- Tabbatar da zaɓi tare da maɓallin "LOG / Shigar".
- Danna maɓallin "SET" akai-akai har sai kun koma yanayin aunawa ko jira 5 seconds; sannan mitar zata canza zuwa yanayin aunawa ta atomatik.
Sauya baturi
- Sauya batura lokacin da ƙaramin baturi ya bayyana a kusurwar hagu na nuni. Ƙananan batura na iya haifar da karatun da ba daidai ba da asarar bayanai.
- Sake tsakiyar dunƙule a cikin ƙananan yanki a bayan naúrar.
- Bude dakin baturi.
- Cire batura da aka yi amfani da su kuma saka sabbin batura 6 na 1.5 V AAA daidai.
- Rufe sashin baturi kuma a ɗaure dunƙule makullin.
Sake saitin tsarin
Idan babban kuskuren tsarin ya faru, sake saita tsarin zai iya magance matsalar. Don yin wannan, danna maɓallin sake saiti tare da siriri abu yayin kunna kayan aiki. Lura cewa wannan yana sake saita saitunan ci-gaba zuwa tsohuwar masana'anta.
Saukewa: RS232
Naúrar tana da haɗin RS232 ta soket na 3.5 mm. Fitowar ita ce kitin bayanai mai lamba 16 wanda za'a iya saita shi bisa ga takamaiman buƙatun mai amfani. Ana buƙatar kebul na RS232 tare da fasali masu zuwa don haɗa naúrar zuwa PC:
Ana nuna kirtani data lambobi 16 a cikin tsari mai zuwa:
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 Lambobin suna tsaye ne don sigogi masu zuwa:
| D15 | Fara kalma |
| D14 | 4 |
| D13 | Lokacin da aka aika bayanan nuni na sama, ana aika 1 Lokacin da aka aika matsakaiciyar bayanan nuni, ana aika 2 Lokacin da aka aika ƙananan bayanan nuni, ana aika 3. |
| D12&D11 | Annunciator don nuni mA = 37 |
| D10 | Polarity
0 = Tabbatacce 1 = Mara kyau |
| D9 | Decimal point (DP), matsayi daga dama zuwa hagu 0 = Babu DP, 1= 1 DP, 2 = 2 DP, 3 = 3 DP |
| D8 zuwa D1 | Nunin nuni, D1 = LSD, D8 = MSD Ga misaliampda:
Idan nuni shine 1234, D8 … D1 shine 00001234 |
| D0 | Ƙarshen kalma |
| Baud darajar | 9600 |
| Daidaituwa | Babu daidaito |
| Data bit no. | 8 data bit |
| Dakatar kadan | 1 tasha bit |
Garanti
Kuna iya karanta sharuɗɗan garanti a cikin Babban Sharuɗɗan Kasuwancin mu waɗanda zaku iya samu anan: https://www.pce-instruments.com/english/terms.
zubarwa
Don zubar da batura a cikin EU, umarnin 2006/66/EC na Majalisar Turai ya shafi. Saboda gurɓatattun abubuwan da ke ƙunshe, batir dole ne a zubar da shi azaman sharar gida. Dole ne a ba su wuraren tattarawa da aka tsara don wannan dalili. Domin bin umarnin EU 2012/19/EU, muna mayar da na'urorin mu. Ko dai mu sake amfani da su ko kuma mu ba su ga kamfanin sake yin amfani da su wanda ke zubar da na'urorin daidai da doka. Don ƙasashen da ke wajen EU, batura, da na'urori yakamata a zubar dasu daidai da ƙa'idodin sharar gida. Idan kuna da wasu tambayoyi, tuntuɓi Kayan aikin PCE
Bayanan tuntuɓar kayan aikin PCE
Jamus
PCE Deutschland GmbH
Ina Langel 4
Saukewa: D-59872
Deutschland
Lambar waya: +49 (0) 2903 976 99 0
Fax: +49 (0) 2903 976 99 29 info@pce-instruments.com
www.pce-instruments.com/deutsch
Ƙasar Ingila
PCE Instruments UK Ltd. girma
Unit 11 Southpoint Business Park Ensign Way, Kuduampton Hampshire
Ƙasar Ingila, SO31 4RF
Lambar waya: +44 (0) 2380 98703 0
Fax: +44 (0) 2380 98703 9
info@pce-instruments.co.uk www.pce-instruments.com/hausa
Netherlands
PCE Brookhuis BV Institutenweg 15
Saukewa: 7521PH
Nederland
Phone: + 31 (0) 53 737 01 92 info@pcebenelux.nl
www.pce-instruments.com/dutch
Faransa
PCE Instruments Faransa EURL
23, Rue de Strasbourg
67250 Soultz-Sous-Forets
Faransa
Waya: +33 (0) 972 3537 17 Lambar fax: +33 (0) 972 3537 18 info@pce-france.fr
www.pce-instruments.com/french
Italiya
PCE Italia srl
Ta hanyar Pesciatina 878 / B-Interno 6 55010 Loc. Gragnano
Capannori (Lucca)
Italiya
Lambar waya: +39 0583 975 114
Fax: +39 0583 974 824
info@pce-italia.it
www.pce-instruments.com/italiano
Hong Kong
PCE Instruments HK Ltd. girma
Unit J, 21/F., Cibiyar COS
56 Tsun Yip Street
Kwan Tong
Kowloon, Hong Kong
Lambar waya: +852-301-84912
jyi@pce-instruments.com
www.pce-instruments.cn
Spain
PCE Ibérica SL
Call Mayor, 53
02500 Tobarra (Albacete)
España
Tel. : +34 967 543 548
Fax: +34 967 543 542
info@pce-iberica.es
www.pce-instruments.com/espanol
Turkiyya
PCE Teknik Cihazları Ltd.Şti. Halkalı Merkez Mah.
Pehlivan Sok. Na 6/C
34303 Küçükçekmece – İstanbul Turkiye
Lambar waya: 0212 471 11 47
Lambar waya: 0212 705 53 93
info@pce-cihazlari.com.tr
www.pce-instruments.com/turkish
Amurka ta Amurka
PCE Americas Inc. girma
1201 Jupiter Park Drive, Suite 8 Jupiter / Palm Beach
33458 fl
Amurka
Lambar waya: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
Takardu / Albarkatu
 |
Kayan aikin PCE PCE-VR 10 Voltage Data Logger [pdf] Manual mai amfani PCE-VR 10 Voltage Data Logger, PCE-VR, 10 Voltage Data Logger |
