I-LSI SVSKA2001 Data Logger Reprogramming Kit Manual yomsebenzisi
Uhlu lokubuyekeza
| Inkinga | Usuku | Incazelo yezinguquko |
| Umsuka | 04/09/2020 | |
| 1 | 17/09/2020 | Shintsha inketho ethi “Yeqa i-Flash Erase” ekhasini le-13 nele-14 |
| 2 | 11/10/2021 | Idrayivu yokubhala eshintshiwe kanye nezinkomba ezihlobene |
| 3 | 20/07/2022 | Indawo ye-ST-Link efakwe esikhundleni se-STM32 Cube Programmer; wanezela imiyalo yokuvula; yenziwe
izinguquko ezincane |
Mayelana nale manuwali
Ulwazi oluqukethwe kule manuwali lungashintshwa ngaphandle kokwaziswa kusengaphambili. Ayikho ingxenye yale manuwali okumele iphinde ikhiqizwe, noma ngogesi noma ngomshini, ngaphansi kwanoma yisiphi isimo, ngaphandle kwemvume ebhalwe ngaphambili ye-LSI LASTEM.
I-LSI LASTEM igodla ilungelo lokwenza izinguquko kulo mkhiqizo ngaphandle kokubuyekezwa ngesikhathi kwalo mbhalo. Copyright 2020-2022 LSI LASTEM. Wonke Amalungelo Agodliwe.
1.Isingeniso
Le manuwali ichaza indlela yokufaka nokusebenzisa ikhithi ye-SVSKA2001 ukuze uhlele kabusha i-Alpha-Log ne-Pluvi- One yokuloga idatha. Ngaphambi kokuqhubeka nokusebenzisa le kit, zama isofthiwe ye-LSI.UpdateDeployer (bona imanuwali ye-IST_05055).
Ikhithi ingaphinda isetshenziselwe ukuvula abaloga bedatha uma ikhiywa.
Idrayivu yepeni ye-USB iqukethe:
- ST-LINK/V2 isofthiwe nezishayeli
- Isoftware ye-STM32 Cube Programmer
- i-firmware ye-LSI LASTEM yokuloga idatha
- le manuwali (IST_03929 Ikhithi yokuhlela kabusha i-data logger - imanuwali yomsebenzisi)
Inqubo iqukethe:
- ukufaka isofthiwe yokuhlela kanye nezishayeli zomhleli ze-ST-LINK/V2 ku-PC
- ukuxhuma umhleli we-ST-LINK/V2 ku-PC kanye nesilondolozi sedatha
- ukuthumela i-firmware kusilondolozi sedatha noma ukuyithumela imiyalo yokuvula uma kwenzeka ikhiya.
2. Ukulungiselela isiloga sedatha soxhumano
Ukuhlelwa kabusha noma ukuvulwa kwesiloga sedatha kwenzeka ngomhleli we-ST-LINK. Ukuze uxhume umklami, kuyadingeka ukususa amabhodi e-electronic we-logger yedatha njengoba kuchazwe ngezansi.
ISEXWAYISO! Ngaphambi kokuqhubeka sebenzisa isisetshenziswa esilwa nokuqina (isb. ibhande lesihlakala elilwa ne-antistatic) ukuze unciphise, damp- en, ivimbela ukukhishwa kwe-electrostatic; ukunqwabelana noma ukuchithwa kukagesi omile, kungalimaza izingxenye zikagesi.
- Susa amakepisi amabili bese uqaqa izikulufo zokulungisa ezimbili.
- Susa itheminali 1÷13 kanye ne-30÷32 ebhodini letheminali. Bese ngakwesokudla sebhodi letheminali, faka ukucindezela kokukhanya phansi futhi ngesikhathi esifanayo phushela uqonde ngaphakathi kwedatha
logger kuze kube yilapho amabhodi e-electronic kanye nesibonisi siphuma ngokuphelele.
3 Ukufaka isofthiwe yomhleli namashayeli ku-PC
Isofthiwe ye-STM32 Cube Programmer isiza ukuhlela okusheshayo kwangaphakathi kwesistimu kwezilawuli ezincane ze-STM32 phakathi nokuthuthukiswa ngamathuluzi e-ST-LINK, ST-LINK/V2 kanye ne-ST-LINK-V3.
Qaphela: Ingxenye yenombolo yesofthiwe ye-STM32 Cube Programmer ithi “SetupSTM32CubeProgrammer_win64.exe”.
3.1 Ukuqalisa
Lesi sigaba sichaza izidingo kanye nezinqubo zokufaka i-STM32 Cube Programmer (STM32CubeProg).
3.1.1 Izidingo zesistimu
Ukucushwa kwe-STM32CubeProg PC kudinga okungenani:
- I-PC enembobo ye-USB kanye nephrosesa ye-Intel® Pentium® esebenzisa inguqulo engu-32-bit yeyodwa yama-
ukulandela amasistimu wokusebenza e-Microsoft®:
o Windows® XP
o Windows® 7
o Windows® 10 - 256 Mbytes ye-RAM
- 30 Mbytes wesikhala se-hard disk esitholakalayo
3.1.2 Ukufaka i-STM32 Cube Programmer
Landela lezi zinyathelo kanye nemiyalelo esesikrinini ukuze ufake i-STM32 Cube Programmer (Stm32CubeProg):
- Faka i-LSI LASTEM pen drive ku-PC.
- Vula ifolda ethi “STLINK-V2\en.stm32cubeprg-win64_v2-11-0”.
- Chofoza kabili i-SetupSTM32CubeProgrammer_win64.exe esebenzisekayo, ukuze uqalise ukufaka, futhi ulandele imiyalo esesikrinini (kusuka ku-fig. 1 ukuya ku-fig. 13) ukuze ufake isofthiwe endaweni yokuthuthukisa.
Ikhithi yokuhlela kabusha i-data logger - Imanuwali yomsebenzisi
3.1.3 Ukufaka i-ST-LINK, ST-LINK/V2, ST-LINK/V2-1 isishayeli se-USB esisayinwe ku-Windows7, Windows8, Windows10
Lo mshayeli we-USB (STSW-LINK009) ungowamabhodi we-ST-LINK/V2, ST-LINK/V2-1 kanye ne-ST-LINK/V3 nokuphuma kokunye (amabhodi okuthola i-STM8/STM32, amabhodi okuhlola e-STM8/STM32 kanye namabhodi e-STM32 Nucleo). Imemezela ohlelweni izixhumanisi ze-USB okungenzeka zihlinzekwe yi-ST-LINK: ST Debug, imbobo ye-Virtual COM kanye nezixhumanisi ze-ST Bridge.
Qaphela! Umshayeli kufanele afakwe ngaphambi kokuxhuma idivayisi, ukuze abe nezibalo eziphumelelayo.
Vula ifolda ethi “STLINK-V2\Driver” ye-LSI LASTEM pen drive bese uchofoza kabili okusebenzisekayo:
- dpinst_x86.exe (yesistimu yokusebenza ye-32-bit)
- dpinst_amd64.exe (yesistimu yokusebenza engu-64-bit)
Ukuze uqalise ukufakwa, landela imiyalo esesikrinini (kusuka ku-fig. 14 ukuya ku-fig. 16) ukuze ufake izishayeli.
3.2 Uxhumano lwe-ST-LINK, ST-LINK/V2, ST-LINK/V2-1, ST-LINK/V3 embobeni ye-USB
Xhuma ikhebula le-USB:
- I-Micro-USB ukuya ku-ST-LINK/V2
- Uhlobo lwe-USB-A ukuya embobeni ye-USB PC
Izovula i-LED ebomvu kusihleli:
3.3 Thuthukisa i-firmware
- Vula
futhi ngemva kwemizuzwana embalwa 
izovela iwindi main
- Qhubeka nokuthuthukisa i-firmware njengoba kuchazwe ku-fig. 17 kuza. 20. I-PC kufanele ixhumeke ku-inthanethi.
4 Ukuxhumana nesilondolozi sedatha
Ukuze uxhume isiloga sedatha kumhleli, qhubeka kanje:
- Xhuma ikhebula le-8 pin Female/Female kusixhumi esimnyama se-J13 sesixhumi sekhadi (uma kunekhebula exhunyiwe, yinqamule) kanye nesixhumi esingu-J.TAG/ SWD yama-probes. Bese uxhuma ikhebula lamandla (i-terminal block 13+ kanye ne-15-) bese uvula isilondolozi sedatha.
- . Setha imingcele yokumisa ye-ST-LINK futhi wenze uxhumano njengoba kuchazwe ku-fig. 21 kuza. 22.
Manje, usuyakwazi ukuhlela kabusha isiloga sedatha (§5).
5 Ukuhlela kabusha abalogu bedatha
I-firmware yelogger yedatha igcinwa kumemori ye-microprocessor ekhelini elithi 0x08008000 ngenkathi ekhelini elithi 0x08000000 kukhona uhlelo lokuqalisa (i-bootloader).
Ukuze ulayishe i-firmware, landela imiyalelo yesahluko §5.1.
Ukuze uthole isibuyekezo se-bootloader, landela imiyalelo yesahluko §0.
5.1 Ukulayisha i-Firmware
- Chofoza
ku-STM32 Cube Programmer. Izovela inketho yokusula nokuhlela.
- 2. Chofoza okuthi “Phequlula” bese ukhetha i-.bin file ukuthuthukisa umkhiqizo (inguqulo yokuqala ye-bin file igcinwe ku-FW\ endleleni ye-LSI LASTEM pen drive; ngaphambi kokuqhubeka xhumana ne-LSI LASTEM ukuze uthole inguqulo yakamuva). QAPHELA! Kubalulekile ukusetha le mingcele:
➢ Ikheli lokuqala: 0x08008000
➢ Yeqa i-Flash Sula ngaphambi kokuhlela: akukhethiwe
➢ Qinisekisa ukuhlela: kukhethiwe
- Chofoza okuthi Qala ukuhlela bese ulinda ukuphela komsebenzi wokuhlela.
- Chofoza okuthi Nqamula.
- Nqamula amandla nekhebuli ebhodini.
- Hlanganisa kabusha umkhiqizo kuzo zonke izingxenye zawo (§0, uqhubekela emuva).
QAPHELA! I-Firmware kufanele ilayishwe kokuthi 0x08008000 (Ikheli Lokuqala). Uma ikheli lingalungile, kuyadingeka ukulayisha i-bootloader (njengoba kuchazwe esahlukweni §0), ngaphambi kokuphinda ukulayishwa kwe-firmware. QAPHELA! Ngemva kokulayisha i-firmware entsha isiloga sedatha siyaqhubeka nokubonisa inguqulo ye-firmware yangaphambilini.
5.2 Ukwenza i-bootloader
Inqubo iyafana nokulayishwa kwe-firmware. Ikheli lokuqala, File indlela (igama le-firmware) namanye amapharamitha kufanele ashintshwe.
- Chofoza ku- ye-STM32 Cube Programmer. Izovela inketho yokusula nokuhlela
- Chofoza okuthi “Phequlula” bese ukhetha i-Bootloader.bin egcinwe ku-LSI LASTEM pen drive (indlela FW\). QAPHELA! Kubalulekile ukusetha le mingcele:
➢ Ikheli lokuqala: 0x08000000
➢ Yeqa i-Flash Sula ngaphambi kokuhlela: kukhethiwe
➢ Qinisekisa ukuhlela: kukhethiwe - Chofoza okuthi Qala ukuhlela bese ulinda ukuphela komsebenzi wokuhlela.
Manje, qhubeka nokulayisha i-firmware (bona §5.1).
6 Ungawavula kanjani amaloga edatha we-LSI LASTEM uma kwenzeka kukhiywa
Ikhithi yokuhlela ye-SVSKA2001 ingasetshenziswa ukuvula i-Pluvi-One noma i-Alpha-Log data logger. Kungenzeka, ngesikhathi sokusebenza kwaso, ukuthi isilondolozi sedatha siyakhiya. Kulesi simo isibonisi sivaliwe futhi i-Tx/Rx eluhlaza ye-LED ivuliwe. Ukucisha nokuvula ithuluzi akuyixazululi inkinga.
Ukuze uvule isilondolozi sedatha, qhubeka kanje:
- Xhuma isiloga sedatha kumhleli (§0, §4).
- Qalisa i-STM32 Cube Programmer bese uchofoza Xhuma. Kuvela umlayezo wephutha:
- Chofoza OK bese, nweba i-RDP Out Protection, setha ipharamitha ye-RDP ku-AA
- Chofoza okuthi Faka bese ulinda ukuphela komsebenzi
Bese, uqhubeke nokuhlelwa kwe-bootloader (§5.2) kanye ne-firmware (§5.1).
7 SVSKA2001 ukunqanyulwa kwekhithi yokuhlela
Uma izinqubo zokuhlela kabusha seziqediwe, nqamula ikhithi yokuhlela ye-SVSKA2001 bese uvala isiqophi sedatha njengoba kuchazwe esahlukweni §0, uqhubekele emuva.
Funda okwengeziwe ngale Manuwali & Landa i-PDF:
Amadokhumenti / Izinsiza
 |
I-LSI SVSKA2001 Data Logger Reprogramming Kit [pdf] Imaniwali yosebenzisayo I-SVSKA2001 Data Logger Reprogramming Kit, SVSKA2001, SVSKA2001 Reprogramming Kit, Data Logger Reprogramming Kit, Logger Reprogramming Kit, Data Logger, Reprogramming Kit |
