LSI SVSKA2001 Data Logger Reprogramming Kit User Manual
Lenane la litlhahlobo
| Hlahisa | Letsatsi | Tlhaloso ea liphetoho |
| Tšimoloho | 04/09/2020 | |
| 1 | 17/09/2020 | Fetola khetho ea "Skip Flash Erase" leqepheng la 13 le 14 |
| 2 | 11/10/2021 | Pene drive e nchafalitsoeng le litšupiso tse amanang le tsona |
| 3 | 20/07/2022 | Sesebelisoa sa ST-Link se nkeloe sebaka ka STM32 Cube Programmer; litaelo tse eketsehileng tsa ho notlolla; entsoe
liphetoho tse nyane |
Mabapi le bukana ena
Lintlha tse bukeng ena li ka fetoloa ntle le tsebiso pele. Ha ho karolo ea bukana ena e ka hlahisoang bocha, eseng ka mokhoa oa elektroniki kapa ka mochini, tlas'a maemo afe kapa afe, ntle le tumello e ngotsoeng pele ho LSI LASTEM.
LSI LASTEM e na le tokelo ea ho etsa liphetoho sehlahisoa sena ntle le ho ntlafatsa tokomane ena ka nako. Copyright 2020-2022 LSI LASTEM. Litokelo tsohle li sirelelitsoe.
1.Selelekela
Bukana ena e hlalosa mokhoa oa ho kenya le ho sebelisa lisebelisoa tsa SVSKA2001 bakeng sa ho hlophisa bocha li-reprogram tsa Alpha-Log le Pluvi- One. Pele u tsoela pele ka tšebeliso ea khithi ena, leka LSI.UpdateDeployer software (sheba buka ea IST_05055).
Kit e ka boela ea sebelisoa ho notlolla li-logger tsa data haeba ho notletsoe.
USB pene drive e na le:
- ST-LINK/V2 software le bakhanni
- STM32 Cube Programmer software
- firmware ea LSI LASTEM data loggers
- bukana ena (IST_03929 Data logger reprogramming Kit – Bukana ea mosebelisi)
Mokhoa ona o kenyelletsa:
- ho kenya software ea ho etsa mananeo le li-driver tsa ST-LINK/V2 ho PC
- ho hokahanya ST-LINK/V2 programmer ho PC le ho data logger
- ho romela firmware ho data logger kapa ho e romella litaelo tsa ho notlolla ha ho ka koaloa.
2. Ho lokisetsa data logger bakeng sa kgokelo
Ho hlophisa bocha kapa ho notlolla sepoloto sa data ho etsahala ka ST-LINK programmer. Ho hokahanya moqapi, hoa hlokahala ho tlosa liboto tsa elektronike tsa logger ea data joalokaha ho hlalositsoe ka tlase.
TLHOKOMELO! Pele o tsoela pele sebelisa sesebelisoa sa antistatic (mohlala, leqhoele la letsoho le thibelang boemo) ho fokotsa, damp- en, e thibela ho tsoa ha electrostatic; ho bokellana kapa ho tsoa ha motlakase o sa fetoheng, ho ka senya likarolo tsa motlakase.
- Tlosa li-caps tse peli ebe o tlosa lisebelisoa tse peli tsa ho lokisa.
- Tlosa terminal 1÷13 le 30÷32 botong ea terminal. Ebe ka lehlakoreng le letona la boto ea terminal, sebelisa khatello e bobebe ho ea tlase 'me ka nako e ts'oanang u sutumele ka hare ho data
logger ho fihlela liboto tsa elektronike le pontšo li tsoa ka ho feletseng.
3 Ho kenya software le li-driver ho PC
Software ea STM32 Cube Programmer e thusa ho potlakisa mananeo a potlakileng a tsamaiso ea li-microcontrollers tsa STM32 nakong ea nts'etsopele ka lisebelisoa tsa ST-LINK, ST-LINK/V2 le ST-LINK-V3.
Tlhokomeliso: Karolo ea karolo ea software ea STM32 Cube Programmer ke "SetupSTM32CubeProgrammer_win64.exe".
3.1 Ho qala
Karolo ena e hlalosa litlhoko le mekhoa ea ho kenya STM32 Cube Programmer (STM32CubeProg).
3.1.1 Litlhoko tsa tsamaiso
Tlhophiso ea PC ea STM32CubeProg e hloka bonyane:
- PC e nang le boema-kepe ba USB le processor ea Intel® Pentium® e sebelisang mofuta oa 32-bit oa e 'ngoe ea li
litsamaiso tse latelang tsa Microsoft®:
o Windows® XP
o Windows® 7
o Windows® 10 - 256 Mbytes ea RAM
- 30 Mbytes ea sebaka sa hard disk se teng
3.1.2 Ho kenya STM32 Cube Programmer
Latela mehato ena le litaelo tse skrineng ho kenya STM32 Cube Programmer (Stm32CubeProg):
- Kenya pene ea LSI LASTEM ho PC.
- Bula foldara "STLINK-V2\en.stm32cubeprg-win64_v2-11-0".
- Tobetsa habeli SetupSTM32CubeProgrammer_win64.exe, ho qala ho kenya, le ho latela litlhahiso tse hlahang skrineng (ho tloha ho feiga. 1 ho isa feiga. 13) ho kenya software tikolohong ea nts'etsopele.
Setsi sa reprogramming ea data logger - Buka ea mosebelisi
3.1.3 Ho kenya ST-LINK, ST-LINK/V2, ST-LINK/V2-1 mokhanni oa USB o saenetse Windows7, Windows8, Windows10
Mokhanni enoa oa USB (STSW-LINK009) ke oa liboto tsa ST-LINK/V2, ST-LINK/V2-1 le ST-LINK/V3 le lintho tse nkiloeng ho tsona (liboto tsa ho sibolla tsa STM8/STM32, liboto tsa tlhahlobo tsa STM8/STM32 le liboto tsa STM32 Nucleo). E tsebisa sisteme likhokahano tsa USB tse ka fanoang ke ST-LINK: ST Debug, Virtual COM port le ST Bridge interface.
Ela hloko! Mokhanni o tlameha ho kenngoa pele a hokahanya sesebelisoa, ho ba le palo e atlehileng.
Bula foldara "STLINK-V2\Driver" ea LSI LASTEM pene drive ebe o tobetsa habeli e ka phethisoang:
- dpinst_x86.exe (bakeng sa sistimi e sebetsang ea 32-bit)
- dpinst_amd64.exe (bakeng sa sistimi e sebetsang ea 64-bit)
Ho qala ts'ebetso, latela litlhahiso tse hlahang skrineng (ho tloha ho feiga 14 ho ea ho 16) ho kenya li-driver.
3.2 Khokahano ea ST-LINK, ST-LINK/V2, ST-LINK/V2-1, ST-LINK/V3 ho koung ea USB
Hokela thapo ya USB:
- Micro-USB ho ea ho ST-LINK/V2
- USB Type-A ho ea ho USB port PC
E tla bulela LED e khubelu ho moetsi oa lenaneo:
3.3 Ntlafatsa firmware
- Bula
mme kamora metsotswana e mmalwa 
tla hlaha ka sehloohong fensetere
- Tsoela pele ho ntlafatsa firmware joalokaha ho hlalositsoe ho tloha feiga. 17 ho ea feiga. 20. Khomphuta e tlameha ho hokeloa inthaneteng.
4 Kgokelo ho sehatisi sa data
Bakeng sa ho hokahanya logger ea data ho moetsi oa lenaneo, tsoela pele ka tsela e latelang:
- Hokela thapo ya 8 Pini ya Mosadi/Mosadi ho J13 sehokelo se ntsho sa sehokedi sa karete (haeba ho na le thapo e hoketsweng, e kgaole) le ho sehokelo J.TAG/SWD ea li-probes. Ebe o kopanya thapo ea matla (terminal block 13+ le 15-) 'me u fetole mochine oa data.
- . Beha li-parameter tsa tlhophiso ea ST-LINK 'me u etse khokahano joalo ka ha ho hlalositsoe ho feiga. 21 ho feiga. 22.
Hona joale, o khona ho hlophisa botjha data (§5).
5 Ho hlophisa bocha ba rerang data
Firmware ea data logger e bolokiloe mohopolong oa microprocessor atereseng 0x08008000 ha atereseng 0x08000000 ho na le lenaneo la boot (bootloader).
Ho kenya firmware, latela litaelo tsa khaolo §5.1.
Bakeng sa ntlafatso ea bootloader, latela litaelo tsa khaolo ea §0.
5.1 Ho kenya firmware
- Tobetsa
ho STM32 Cube Programmer. E tla hlaha khetho ea Erasing & Programming.
- 2. Tobetsa ho "Browse" 'me u khethe .bin file ho ntlafatsa sehlahisoa (mofuta oa pele oa bin file e bolokoa ho FW\ tsela ea LSI LASTEM pene drive; pele o tsoela pele ikopanye le LSI LASTEM bakeng sa mofuta oa morao-rao). HLOKOMELA! Ho bohlokoa ho theha paramente ena:
➢ Aterese ea ho qala: 0x08008000
➢ Tlola ho Hlakola ha Flash pele ho lenaneo: ha e ea khethoa
➢ Netefatsa lenaneo: khethiloe
- Tobetsa "Start programming" ebe u emela hore ts'ebetso ea lenaneo e felile.
- Tobetsa Tlosa.
- Tlosa motlakase le thapo ho tloha botong.
- Kopanya sehlahisoa likarolong tsohle tsa sona (§0, ho ea morao).
HLOKOMELA! Firmware e tlameha ho kenngoa ho 0x08008000 (Aterese ea ho Qala). Haeba aterese e fosahetse, hoa hlokahala ho kenya bootloader (joalokaha ho hlalositsoe khaolong ea §0), pele u pheta ho kenya firmware. HLOKOMELA! Ka mor'a ho kenya firmware e ncha, motlatsi oa data o tsoela pele ho bontša mofuta o fetileng oa firmware.
5.2 Lenaneo la bootloader
Mokhoa ona o tšoana le oa ho kenya firmware. Aterese ea ho qala, File tsela (lebitso la firmware) le likarolo tse ling li tlameha ho fetoloa.
- Tobetsa ho ea STM32 Cube Programmer. E tla hlaha khetho ea Erasing & Programming
- Tobetsa ho "Browse" 'me u khethe Bootloader.bin e bolokiloeng ho LSI LASTEM pene drive (tsela FW\). HLOKOMELA! Ho bohlokoa ho theha paramente ena:
➢ Aterese ea ho qala: 0x08000000
➢ Tlola ho Hlakola ha Flash pele ho lenaneo: khethiloe
➢ Netefatsa lenaneo: khethiloe - Tobetsa "Start programming" ebe u emela hore ts'ebetso ea lenaneo e felile.
Joale, tsoela pele ka ho kenya firmware (sheba §5.1).
6 Mokhoa oa ho notlolla li-logger tsa LSI LASTEM haeba ho notletsoe
The SVSKA2001 programming kit e ka sebelisoa ho notlolla Pluvi-One kapa Alpha-Log data logger. Ho ka etsahala, nakong ea ts'ebetso ea eona, hore data logger e notle. Boemong bona ponts'o e koetsoe 'me Tx/Rx e tala ea LED e buletsoe. Ho tima sesebelisoa le ho se bulela ha ho rarolle bothata.
Ho notlolla data logger, tsoela pele ka tsela e latelang:
- Hokela sepoloto sa data ho moetsi oa lenaneo (§0, §4).
- Matha STM32 Cube Programmer ebe o tobetsa Connect. Ho hlaha molaetsa oa phoso:
- Tobetsa OK, ebe, atolosa RDP Out Protection, beha parameter ea RDP ho AA
- Tobetsa Etsa kopo 'me u eme qetellong ea ts'ebetso
Ebe, tsoela pele ka lenaneo la bootloader (§5.2) le firmware (§5.1).
7 SVSKA2001 ho khaoha ha lisebelisoa tsa lenaneo
Hang ha mekhoa ea ho hlophisa bocha e se e phethiloe, khaola thipa ea lenaneo la SVSKA2001 'me u koale sepolokelo sa data joalo ka ha se hlalositsoe khaolong ea §0, u khutlela morao.
Bala haholoanyane ka Bukana ena & Khoasolla PDF:
Litokomane / Lisebelisoa
 |
LSI SVSKA2001 Data Logger Reprogramming Kit [pdf] Bukana ea Mosebelisi SVSKA2001 Data Logger Reprogramming Kit, SVSKA2001, SVSKA2001 Reprogramming Kit, Data Logger Reprogramming Kit, Logger Reprogramming Kit, Data Logger, Reprogramming Kit |
