Akwụkwọ ntuziaka onye ọrụ LSI SVSKA2001 Data Logger Reprogramming

*Okwu*	*Ụbọchị*	*Nkọwa nke mgbanwe*
Mmalite	04/09/2020
1	17/09/2020	Gbanwee nhọrọ “Skip Flash Erase” na ibe 13 na 14
2	11/10/2021	Mbanye pen nọchiri anya yana ntụnyere ndị metụtara ya
3	20/07/2022	Dochiri uru ST-Link na STM32 Cube Programmer; iwu mkpọghe agbakwunyere; mere obere mgbanwe

Banyere akwụkwọ ntuziaka a

Enwere ike ịgbanwe ozi dị n'ime akwụkwọ ntuziaka a na-enweghị ọkwa mbụ. Ọ nweghị akụkụ nke akwụkwọ ntuziaka a enwere ike imepụtagharị, ọbụghị na igwe eletrọnịkị ma ọ bụ n'usoro, n'ọnọdụ ọ bụla, na-enweghị ikike edere mbụ nke LSI LASTEM.
LSI LASTEM nwere ikike ime mgbanwe na ngwaahịa a na-enweghị emelite akwụkwọ a n'oge. Nwebiisinka 2020-2022 LSI LASTEM. Ikike niile echekwabara.

1. Okwu mmalite

Akwụkwọ ntuziaka a na-akọwa otu esi etinye na iji ngwa SVSKA2001 maka ịmegharị data data Alpha-Log na Pluvi-One. Tupu ịga n'ihu na iji ngwa a, nwaa ngwa ngwa LSI.UpdateDeployer (lee akwụkwọ ntuziaka IST_05055).
Enwere ike iji ngwa ahụ kpọghee ndị na-edekọ data ma ọ bụrụ na akpọchiri.

Igwe eriri USB nwere:

ST-LINK/V2 software na ọkwọ ụgbọala
STM32 Cube Programmer software

firmware nke LSI LASTEM data loggers
akwụkwọ ntuziaka a (IST_03929 Data logger reprogramming kit – ntuziaka onye ọrụ)

Usoro a nwere:

na-etinye ngwanrọ mmemme yana ndị ọkwọ ụgbọala mmemme na ST-LINK/V2 na PC
ijikọ ST-LINK/V2 programmer na PC yana na onye na-ebu data

izipu firmware na onye na-ebu data ma ọ bụ ziga ya iwu mkpọghe ma ọ bụrụ na akpọchi.

2. Na-akwadebe ihe ndekọ data maka njikọ

Nhazigharị ma ọ bụ imeghe nke onye na-edepụta data na-ewere ọnọdụ site na onye mmemme ST-LINK. Iji jikọọ onye mmemme, ọ dị mkpa iwepu mbadamba eletrọnịkị nke onye na-ebu data dị ka akọwara n'okpuru.

Kpachara anya! Tupu ịga n'ihu jiri ngwaọrụ antistatic (dịka eriri nkwojiaka antistatic) iji belata, damp- ens, na-egbochi mpụta electrostatic; mwepu ma ọ bụ mwepu nke ọkụ eletrik kwụ ọtọ, nwere ike imebi akụrụngwa eletrik.

Wepu okpu abụọ ahụ wee kpughee skru abụọ ahụ edozi.

Wepu ọnụ 1÷13 na 30÷32 na bọọdụ ọnụ. Mgbe ahụ, n'akụkụ aka nri nke bọọdụ ọnụ, tinye nrụgide ọkụ ala ma n'otu oge ahụ gaa n'ime data ahụ.

logger ruo mgbe electronic mbadamba na ngosi pụta kpamkpam.

3 Ịwụnye ngwanrọ mmemme na ndị ọkwọ ụgbọala na PC

Ngwa STM32 Cube Programmer na-akwado mmemme ngwa ngwa n'ime sistemụ nke STM32 microcontrollers n'oge mmepe site na ngwa ST-LINK, ST-LINK/V2 na ST-LINK-V3.
Mara: Nọmba akụkụ nke STM32 Cube Programmer software bụ “SetupSTM32CubeProgrammer_win64.exe”.

3.1 Mmalite

Akụkụ a na-akọwa ihe achọrọ na usoro iji wụnye STM32 Cube Programmer (STM32CubeProg).

3.1.1 System chọrọ

Nhazi PC STM32CubeProg chọrọ ka opekempe:

PC nwere ọdụ ụgbọ USB yana Intel® Pentium® processor na-agba ụdị 32-bit nke otu n'ime ya
Sistemu arụ ọrụ Microsoft®:
o Windows® XP
ma Windows®7
ma Windows®10
256 Mbytes nke RAM

30 Mbytes nke ohere diski ike dị

3.1.2 Ịwụnye STM32 Cube Programmer

Soro usoro ndị a yana ntuziaka ihuenyo ka ịwụnye STM32 Cube Programmer (Stm32CubeProg):

Fanye mbanye pen LSI LASTEM na PC.
Mepee folda "STLINK-V2\en.stm32cubeprg-win64_v2-11-0".

Pịa SetupSTM32CubeProgrammer_win64.exe executable ugboro abụọ, ka ịmalite nrụnye, wee soro ihe ngosi ihuenyo (site na fig. 1 ruo fig. 13) iji wụnye ngwanro na gburugburu mmepe.

Ngwa nhazigharị ihe ndekọ data – Akwụkwọ ntuziaka onye ọrụ

3.1.3 Ịwụnye ST-LINK, ST-LINK/V2, ST-LINK/V2-1 USB ọkwọ ụgbọala bịanyere aka na Windows7, Windows8, Windows10

Onye ọkwọ ụgbọ ala USB a (STSW-LINK009) bụ maka ST-LINK/V2, ST-LINK/V2-1 na ST-LINK/V3 bọọdụ na ihe ndị ọzọ (STM8/STM32 discovery boards, STM8/STM32 evaluation boards and STM32 Nucleo boards). Ọ na-ekwupụta na sistemụ USB interfaces nwere ike inye site na ST-LINK: ST Debug, Virtual COM port na ST Bridge interfaces.
Ntị! A ghaghị ịwụnye onye ọkwọ ụgbọ ala tupu ijikọ ngwaọrụ ahụ, iji nweta ngụkọ nke ọma.
Mepee folda "STLINK-V2 ọkwọ ụgbọala" nke LSI LASTEM pen mbanye wee pịa ihe omume ugboro abụọ:

dpinst_x86.exe (maka sistemụ arụmọrụ 32-bit)
dpinst_amd64.exe (maka sistemụ arụmọrụ 64-bit)

Iji malite nrụnye ahụ, soro ntuziaka na ihuenyo (site na fig 14 ruo fig 16) iji wụnye ndị ọkwọ ụgbọala.

3.2 Njikọ ST-LINK, ST-LINK/V2, ST-LINK/V2-1, ST-LINK/V3 na ọdụ ụgbọ USB

Jikọọ eriri USB:

Micro-USB ka ST-LINK/V2
Ụdị USB-A na PC ọdụ ụgbọ mmiri USB
Ọ ga-agbanye red LED na mmemme:

3.3 Kwalite ngwa ngwa

Mepee na mgbe sekọnd ole na ole gasịrị ga-apụta na isi window
Gaa n'ihu iji kwalite famụwe dịka akọwara site na fig. 17 ka fig. 20. PC ga-ejikọta na ịntanetị.

4 Njikọ na onye na-edekọ data

Maka ijikọ data logger na programmer, gaba n'ihu dị ka ndị a:

Jikọọ eriri nwanyị / nwanyị 8 pin na njikọ ojii J13 nke njikọ kaadị (ọ bụrụ na enwere eriri ejikọrọ, kwụpụ ya) na njikọ J.TAG/ SWD nke nyocha. Mgbe ahụ jikọọ eriri ọkụ (mkpọchi njedebe 13+ na 15-) wee gbanye data logger.
. Tọọ paramita nhazi ST-LINK wee mee njikọ dị ka akọwara site na fig. 21 ruo fig. 22.

Ugbu a, ị nwere ike ịmegharị data logger (§5).

5 Na-emegharị ndị na-edekọ data

A na-echekwa firmware nke data logger na ebe nchekwa microprocessor na adreesị 0x08008000 ebe na adreesị 0x08000000 enwere mmemme buut (bootloader).
Iji bulite ngwa ngwa, soro ntuziaka nke isi §5.1.
Maka mmelite nke bootloader, soro ntuziaka nke isiakwụkwọ §0.

5.1 bulite ngwa ngwa

Pịa na nke STM32 Cube Programmer. Ọ ga-apụta Nhọrọ Erasing & Programming.
2. Pịa na "Chọgharịa" wee họrọ .bin file iji kwalite ngwaahịa (ụdị nke mbụ nke bin file A na-echekwa ya n'ụzọ FW nke LSI LASTEM pen mbanye; tupu ịga n'ihu kpọtụrụ LSI LASTEM maka ụdị kachasị ọhụrụ). Ntị! Ọ dị mkpa ịtọ ntọala ndị a:
Adreesị mmalite: 0x08008000
➢ Mafee Flash ehichapụ tupu mmemme: ahọpụtaghị
➢ Nyochaa mmemme: ahọpụtara
Pịa Malite mmemme ma chere maka njedebe mmemme mmemme.

Pịa Kwupu njikọ.
Kwupu ike na eriri na bọọdụ.
Tinyegharịa ngwaahịa ahụ n'akụkụ ọ bụla (§0, na-aga azụ).
Ntị! A ga-ebunye ngwa ngwa na 0x08008000 (Adreesị Mmalite). Ọ bụrụ na adreesị ahụ ezighi ezi, ọ dị mkpa ịkwanye bootloader (dị ka akọwara na isi nke §0), tupu ịmaliteghachi ngwa ngwa ngwa ngwa. Ntị! Mgbe nbudata ngwa ngwa ọhụrụ ahụ, onye na-abanye data na-aga n'ihu na-egosi ụdị firmware gara aga.

5.2 Mmemme bootloader

Usoro bụ otu ihe ahụ maka bulite firmware. Adreesị mmalite, File ụzọ (aha nke firmware) na paramita ndị ọzọ ga-agbanwerịrị.

Pịa na nke STM32 Cube Programmer. Ọ ga-apụta Nhọrọ Erasing & Programming
Pịa na "Chọgharịa" wee họrọ Bootloader.bin echekwara na LSI LASTEM pen mbanye (ụzọ FW). Ntị! Ọ dị mkpa ịtọ ntọala ndị a:
Adreesị mmalite: 0x08000000
➢ Kpuchie mkpochapụ Flash tupu mmemme: ahọpụtara
➢ Nyochaa mmemme: ahọpụtara

Pịa Malite mmemme ma chere maka njedebe mmemme mmemme.

Ugbu a, gaa n'ihu na bulite ngwa ngwa (lee §5.1).

6 Otu esi kpọghee ihe ndekọ data LSI LASTEM ma ọ bụrụ na akpọchiri

Enwere ike iji ngwa mmemme SVSKA2001 meghee Pluvi-One ma ọ bụ Alfa-Log data logger. Ọ nwere ike ime, n'oge ọrụ ya, na onye na-edekọ data na-akpọchi. N'ọnọdụ a ngosi agbanyụrụ na Tx/Rx green LED dị. Ịgbanye ngwá ọrụ na ịgbanyụ anaghị edozi nsogbu ahụ.

Iji kpọghee ihe ndekọ data, gaba n'ihu dị ka nke a:

Jikọọ ihe ndekọ data na onye mmemme (§0, §4).

Gbaa STM32 Cube Programmer wee pịa Jikọọ. Ozi njehie na-egosi:
Pịa OK wee , gbasaa Nchedo RDP, tọọ oke RDP ka ọ bụrụ AA
Pịa Tinye ma chere njedebe nke ọrụ ahụ

Mgbe ahụ, gaa n'ihu na mmemme nke bootloader (§5.2) na firmware (§5.1).

7 SVSKA2001 na-ewepụ ngwa mmemme mmemme

Ozugbo emechara usoro nhazigharị ahụ, kwụpụ ngwa mmemme SVSKA2001 wee mechie ihe ndekọ data dị ka akọwara n'isi nke §0, na-aga n'ihu azụ.

Gụkwuo maka akwụkwọ ntuziaka a wee budata PDF:

Akwụkwọ / akụrụngwa

LSI SVSKA2001 Data Logger Reprogramming Kit [pdf] Akwụkwọ ntuziaka onye ọrụ
Ngwa SVSKA2001 Data Logger Reprogramming Kit, SVSKA2001, SVSKA2001 Reprogramming Kit, Data Logger Reprogramming Kit, Logger Reprogramming Kit, Data Logger, Reprogramming Kit

Ntụaka

Akwụkwọ ntuziaka onye ọrụ