Vision 120 Programmable Logic Controller
Bukana ea Mosebelisi
V120-22-RA22
M91-2-RA22
Tataiso ena e fana ka lintlha tsa mantlha bakeng sa molaoli oa Unitronics V530-53-B20B.
Tlhaloso e Akaretsang
V530 OPLCs ke li-control tsa logic tse hlophisehang tse kenyelletsang phanele ea ts'ebetso e hahelletsoeng ka har'a sekirini sa monochrome, se bonts'ang keyboard ha sesebelisoa se hloka hore opareitara e kenye data.
Lipuisano
- Likou tse 2 tsa serial: RS232 (COM 1), RS232/485 (COM 2)
- 1 boema-kepe ba CANbus
- Mosebedisi a ka odara le ho kenya boema-kepe bo eketsehileng. Mefuta e fumanehang ea boema-kepe ke: RS232/RS485, le Ethernet
- Lithibelo tsa Mosebetsi oa Puisano li kenyelletsa: SMS, GPRS, MODBUS serial/IP Protocol FB e nolofalletsa PLC ho buisana le hoo e batlang e le sesebelisoa sefe kapa sefe sa kantle, ka likhokahano tsa serial kapa Ethernet.
Likhetho tsa I / O
V530 e ts'ehetsa tekanyo ea dijithale, lebelo le phahameng, analog, boima ba 'mele le mocheso oa I/So ka:
- Snap-in I/O Modules
Hokela ka morao ho molaoli ho fana ka tlhophiso ea I/O ea boto - Li-Module tsa Katoloso ea I/O
Li-I/O tsa lehae kapa tse hole li ka eketsoa ka boema-kepe ba katoloso kapa Litaelo tsa ho kenya libese tsa CAN le lintlha tse ling li ka fumanoa leqepheng la lintlha tsa tekheniki tsa module.
Boitsebiso
Mokhoa
- View & Hlophisa boleng ba tšebetso, li-setting tsa boema-kepe ba COM, RTC, le litlhophiso tsa phapang/ khanya
- Lekanya skrine ea ho ama
- Emisa, qala 'me u tsosolose PLC
Ho kenya Mokgwa wa Tlhahisoleseding, tobetsa
Mananeo Software, & Utilities
CD ea Unitronics Setup e na le software ea VisiLogic le lisebelisoa tse ling
- VisiLogic
Lokisa lisebelisoa tsa thepa habonolo 'me u ngole lisebelisoa tsa taolo ea HMI le Ladder; laeborari ea Function Block e nolofatsa mesebetsi e rarahaneng joalo ka PID. Ngola kopo ea hau, ebe u e khoasolla ho molaoli ka thapo ea lenaneo e kenyellelitsoeng ka har'a khiti. - Lisebelisoa
E kenyelletsa seva sa Uni OPC, phihlello ea Remote bakeng sa mananeo a hole le tlhahlobo, le DataXport bakeng sa ho rengoa ha data ka nako e sebetsang.
Ho ithuta ho sebelisa le ho hlophisa molaoli, hammoho le ho sebelisa lisebelisoa tse kang Remote Access, sheba ho VisiLogic Help system.
Litafole tsa Lintlha Litafole tsa data li u thusa ho theha li-parameter tsa recipe le ho etsa li-log tsa data.
Litokomane tse ling tsa sehlahisoa li ho Technical Library, e teng ho www.unitronicsplc.com.
Tšehetso ea tekheniki e fumaneha setšeng le ho tloha support@unitronics.com.
Likahare tsa Standard Kit
Taolo ea pono
Sehokelo sa phepelo ea matla a 3-pin
5-Pin sehokelo sa CANbus
Mohanyetsi oa ho emisa marang-rang oa CANbus
Betri (ha e ea kengoa)
Masakaneng a ho kenya (x4)
Tiiso ea rabara
Matšoao a Kotsi
Ha leha e le efe ea matšoao a latelang a hlaha, bala lintlha tse amanang le tsona ka hloko.
| Letšoao | Tlhaloso | Tlhaloso |
 |
Kotsi | Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa. |
 |
Tlhokomediso | Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa. |
| Tlhokomeliso | Tlhokomeliso | E-ba hlokolosi. |
- Pele o sebelisa sehlahisoa sena, mosebelisi o tlameha ho bala le ho utloisisa tokomane ena.
- Tsohle exampli-les le litšoantšo li reretsoe ho thusa ho utloisisa 'me ha li fane ka tiiso ea ts'ebetso.
Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho latela li-examples. - Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha.
- Ke basebeletsi ba nang le tsebo feela ba lokelang ho bula sesebelisoa sena kapa ho lokisa.
Ho hloleha ho latela ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe kapa tshenyo ya thepa.
▪ Se ke oa leka ho sebelisa sesebelisoa sena se nang le li-parameter tse fetang maemo a lumelletsoeng.
▪ Ho qoba ho senya sistimi, se ke oa hokela/hakolla sesebelisoa ha motlakase o buletsoe.
Mehopolo ea Tikoloho
|
▪ Se ke oa kenya libakeng tse nang le lerōle le feteletseng kapa le nang le mouoane o feteletseng, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, litšisinyeho tse tloaelehileng, kapa ho thothomela ho feteletseng, ho latela litekanyetso tse fanoeng letlapeng la lintlha tsa tekheniki tsa sehlahisoa. |
|
▪ Ho kenya moea: Ho hlokahala sebaka sa 10mm pakeng tsa mathōko a ka holimo/ka tlaase le mabota a kampetsoeng. ▪ Se ke oa beha ka metsing kapa ua lumella metsi hore a lutlele holim'a yuniti. ▪ Se ke oa lumella litšila ho oela ka har'a yuniti nakong ea ho kenya. ▪ Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase. |
UL Compliance
Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL.
Mehlala e latelang: V530-53-B20B, V530-53-B20B-J ke UL e thathamisitsoeng bakeng sa Sebaka se Tloaelehileng.
UL Sebaka se Tloaelehileng
E le hore u finyelle maemo a tloaelehileng a sebaka sa UL, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa ea 4 X.
Litekanyetso tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C, le D
Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.
- Tlhokomeliso Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C, le D, kapa libakeng tse se nang kotsi feela.
- Lithapo tsa ho kenya le tse tsoang li tlameha ho tsamaellana le mekhoa ea likhoele tsa Sehlopha sa I, Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola.
- TLHOKOMELISO—Kotsi ea Ho phatloha—ho fapanyetsana ha likarolo ho ka ’na ha sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
- TLHOKOMELISO - KOTSI EA HO PHAHLOA - Se ke oa hokela kapa ua hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- TLHOKOMELISO - Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays.
- Thepa ena e tlameha ho kengoa ho sebelisoa mekhoa ea likhoele joalo ka ha ho hlokahala bakeng sa Sehlopha sa I, Karolo ea 2 joalo ka NEC le/kapa CEC.
Phanele-Mounting
Bakeng sa li-controller tse ka hlophisoang le liphanele, molemong oa ho kopana le maemo a UL Haz Loc, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa mefuta ea 4X.
Puisano le Polokelo ea Mehopolo e Tlohang
Ha lihlahisoa li na le boema-kepe ba likhokahano tsa USB, sekotjana sa karete ea SD, kapa ka bobeli, ha se sekotjana sa karete ea SD kapa boema-kepe ba USB bo reretsoeng hore bo hoketsoe ruri, athe boema-kepe ba USB bo reretsoe ho etsa mananeo feela.
Puisano le Polokelo ea Mehopolo e Tlohang
Ha lihlahisoa li na le boema-kepe ba likhokahano tsa USB, sekotjana sa karete ea SD, kapa ka bobeli, ha se sekotjana sa karete ea SD kapa boema-kepe ba USB bo reretsoeng hore bo hoketsoe ruri, athe boema-kepe ba USB bo reretsoe ho etsa mananeo feela.
Ho ntsha/ Ho ntsha betri
Ha sehlahiswa se kentswe ka betri, o se ke wa ntsha kapa wa nkela betri sebaka ntle le haeba motlakase o timilwe, kapa sebaka seo ho tsejwa hore ha se kotsi.
Ka kopo hlokomela hore ho kgothaletswa ho boloka dintlha tsohle tse bolokiloeng ho RAM, e le ho qoba ho lahleheloa ke data ha u fetola betri ha matla a tima. Lintlha tsa letsatsi le nako le tsona li tla hloka ho hlophisoa bocha kamora ts'ebetso.
Pour respecter la norme UL des zones ordinaires, monter l'appareil sur une surface plane de type de protection 1 ou 4X
Ho kenya Battery
E le hore u boloke data haeba motlakase o tima, o tlameha ho kenya betri.
Betri e fanoa 'me e khomaretsoe sekoahelong sa betri se ka morao ho molaoli.
- Tlosa sekoaelo sa betri se bontšitsoeng leqepheng la 4. Polarity (+) e tšoailoe setšeng sa betri le betri.
- Kenya betri, ho etsa bonnete ba hore letšoao la polarity betiring ke:
– ho shebana le hodimo
– e tsamaellana le letshwao le hodima setshodi - Tlosa sekwahelo sa betri.
Ho phahamisa
Litekanyo
Ho phahamisa Panel
Pele o qala, hlokomela hore phanele e ntseng e eketseha e ke ke ea ba botenya bo fetang 5 mm.
- Etsa phanele e khaotsoeng ho ea ka litekanyo tsa setšoantšo ho ea ka ho le letona.
- Tsamaisa selaolo ho cutout, ho etsa bonnete ba hore tiiso ea rabara e teng.
- Sututsa li-brackets tse 4 ho li-slots tsa tsona mahlakoreng a molaoli joalo ka ha ho bonts'itsoe setšoantšong se ka ho le letona.
- Tiisa likurufu tsa borakete khahlano le phanele. Tšoara borakete ka mokhoa o sireletsehileng khahlano le yuniti ha u ntse u tiisa screw.
- Ha e kentsoe ka nepo, selaoli se lutse hantle ka har'a karolo e sehiloeng ea phanele joalo ka ha ho bonts'itsoe ka tlase.
Wiring
|
▪ U se ke ua tšoara lithapo tse phelang. |
|
▪ Kenya sekhechana sa potoloho se ka ntle. Itebele khahlanong le short-circuiting ka terata e kantle. ▪ Sebelisa lisebelisoa tse loketseng tsa tšireletso ea potoloho. ▪ Lithakhisa tse sa sebelisoeng ha lia lokela ho hokeloa. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa. ▪ Sheba lithapo tsohle habeli pele u bulela phepelo ea motlakase. |
| Tlhokomeliso | ▪ Ho qoba ho senya terata, u se ke ua feta torque e ka holimo ho 0.5 N·m (5 kgf·cm). ▪ U se ke ua sebelisa thini, solder kapa ntho leha e le efe terateng e hlobotsoeng e ka etsang hore khoele ea terata e khaohe. ▪ Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase. |
Mokhoa oa ho Wiring
Sebelisa li-terminals tsa crimp bakeng sa wiring; sebelisa terata ea 26-12 AWG (0.13 mm²–3.31 mm²).
- Hlobola terata ho bolelele ba 7±0.5mm (0.250-0.300 inches).
- Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
- Kenya terata ka botlalo ho theminale ho netefatsa hore ho na le khokahanyo e nepahetseng.
- Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.
▪ Lithapo tse kenyang kapa tse ntšang motlakase ha lia lokela ho tsamaisoa ka thapo e tšoanang ea li-multi-core kapa ho arolelana terata e tšoanang.
▪ Lumella voltagtšitiso ea ho theola le lerata le mela e kenang e sebelisoang sebakeng se selelele. Sebelisa terata e boholo bo lekaneng bakeng sa mojaro.
Phepelo ea motlakase
Molaoli o hloka phepelo ea motlakase ea kantle ea 12 kapa 24VDC. Kenyeletso e dumelletsweng voltagmefuta ea e ke 10.2-28.8VDC, e nang le ripple e ka tlase ho 10%.
|
▪ Motlakase o sa itšetleheng o ka sebelisoa haeba lets'oao la 0V le hokahantsoe le chassis. |
|
▪ Kenya sekhechana sa potoloho se ka ntle. Itebele khahlanong le short-circuiting ka terata e kantle. ▪ Sheba lithapo tsohle habeli pele u bulela phepelo ea motlakase. ▪ Se ke oa hokela lets'oao la 'Neutral kapa 'Line' la 110/220VAC ho phini ea 0V ea sesebelisoa. ▪ Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang. |
Earthing the Power Supply
Ho eketsa ts'ebetso ea sistimi, qoba tšitiso ea motlakase ka:
- Ho kenya molaoli holim'a phanele ea tšepe.
- Ho fafatsa phepelo ea motlakase ea molaoli: hokela pheletsong e le 'ngoe ea terata ea 14 AWG ho lets'oao la chassis; hokela pheletsong enngwe phanele.
Tlhokomeliso: Haeba ho khoneha, terata e sebelisoang ho fafatsa matla a lefats'e ha ea lokela ho feta 10 cm ka bolelele.
Leha ho le joalo, e kgothaletswa ho lefats'e molaoli maemong 'ohle.
Li-Ports tsa puisano
|
▪ Tima motlakase pele u fetola litlhophiso tsa puisano kapa likhokahano. |
| Tlhokomeliso | ▪ Lipontšo li amana le 0V ea molaoli; 0V e tšoanang e sebelisoa ke phepelo ea motlakase. ▪ Kamehla sebelisa li-adapter tse loketseng boema-kepe. ▪ Likou tsa serial ha lia aroloa. Haeba molaoli o sebelisoa ka sesebelisoa sa kantle se sa itšehla thajana, qoba matla a ka bang tengtage e fetang ± 10V. |
Lipuisano tsa Seriana
Letoto lena le na le likou tse 2 tsa mofuta oa RJ-11 le boema-kepe ba CANbus.
COM 1 ke RS232 feela. COM 2 e kanna ea hlophisoa ho RS232 kapa RS485 ka jumper joalo ka ha ho hlalositsoe leqepheng la 9. Ka kamehla, kou e setetsoe ho RS232.
Sebelisa RS232 ho khoasolla mananeo ho tsoa komporong, le ho buisana le lisebelisoa tsa serial le lits'ebetso, joalo ka SCADA.
Sebelisa RS485 ho theha marang-rang a marotholi a mangata a nang le lisebelisoa tse fihlang ho 32.
Pinouts
Li-pinouts tse ka tlase li bonts'a matšoao a rometsoeng ho tloha ho molaoli ho ea ho PC.
Ho hokela PC boema-kepe bo hlophisitsoeng ho RS485, tlosa sehokelo sa RS485, 'me u hokele PC ho PLC ka thapo ea lenaneo. Hlokomela hore sena se ka khoneha feela haeba matšoao a ho laola phallo a sa sebelisoe (e leng boemo bo tloaelehileng).
| RS232 | |
| Pin # | Tlhaloso |
| 1* | Letšoao la DTR |
| 2 | Tlhaloso ea 0V |
| 3 | Letšoao la TXD |
| 4 | Letšoao la RXD |
| 5 | Tlhaloso ea 0V |
| 6* | Letšoao la DSR |
| RS485** | Port ea Molaoli | |
| Pin # | Tlhaloso |  |
| 1 | Letšoao (+) | |
| 2 | (Lets'oao la RS232) | |
| 3 | (Lets'oao la RS232) | |
| 4 | (Lets'oao la RS232) | |
| 5 | (Lets'oao la RS232) | |
| 6 | Letshwao la B (-) | |
*Lithapo tse tloaelehileng tsa lenaneo ha li fane ka lintlha tsa khokahanyo bakeng sa Pins 1 le 6.
** Ha kou e ikamahanya le RS485, Pin 1 (DTR) e sebelisetsoa lets'oao la A, 'me lets'oao la Pin 6 (DSR) le sebelisetsoa lets'oao la B.3
RS232 ho RS485: Ho Fetola Litlhophiso tsa Jumper
Boema-kepe bo behiloe ho RS232 ka kamehla feme.
Ho fetola litlhophiso, qala ka ho tlosa Snap-in I / O Module, haeba e kentsoe, ebe u beha li-jumpers ho latela tafole e latelang.
▪ Pele o qala, ama ntho e theiloeng fatše ho ntša charger leha e le efe ea electrostatic.
▪ Pele o tlosa Snap-in I/O Module kapa o bula molaoli, o tlameha ho tima motlakase.
RS232/RS485 Litlhophiso tsa Jumper
| Jumper | 1 | 2 | 3 | 4 |
| RS232 * | A | A | A | A |
| RS485 | B | B | B | B |
| Ho felisoa ha RS485 | A | A | B | B |
Ho tlosa Snap-in I/O Module
- Fumana likonopo tse 'nè mahlakoreng a molaoli, tse peli ka lehlakoreng le leng.
- Tobetsa likonopo ebe u li tšoara fatše ho bula mochine oa ho notlela.
- Ka bonolo sisinya module ho tloha ka lehlakoreng le leng ho ea ho le leng, ho nolofatsa module ho tloha ho molaoli.
Ho kenya hape Snap-in I/O Module
- Tsamaisa litataiso tse selikalikoe ho molaoli le litataiso tse ho Snap-in I/O Module joalo ka ha ho bonts'itsoe ka tlase.
- Sebelisa esita le khatello likhutlong tsohle tse 4 ho fihlela u utloa 'tobetsa' e ikhethang. Hona joale module e kentsoe.
Etsa bonnete ba hore mahlakore le likhutlo tsohle li hlophisitsoe hantle.
CANbus
Balaoli bana ba kenyelletsa boema-kepe ba CANbus. Sebelisa sena ho theha marang-rang a taolo a arolelanoang ka ho sebelisa e 'ngoe ea liprothokholo tse latelang tsa CAN:
- E KA bula: Lilaoli tse 127 kapa lisebelisoa tsa kantle
- Lethathamo la 2 CAN
- UniCAN e nang le thepa ea Unitronics: balaoli ba 60, (li-byte tsa data tse 512 ka skena)
Boema-kepe ba CANbus bo qheletsoe ka thoko.
CANbus Wiring
Sebelisa thapo e sothehileng. Ho khothaletsoa thapo e sothehileng ea DeviceNet® e teteaneng e sirelelitsoeng.
Li-terminator tsa marang-rang: Tsena li fanoa ka molaoli. Beha li-terminators pheletsong e 'ngoe le e 'ngoe ea marang-rang a CANbus.
Ho hanyetsa ho tlameha ho behoa ho 1%, 121Ω, 1/4W.
Hokela lets'oao la fatše lefatšeng sebakeng se le seng feela, haufi le phepelo ea motlakase.
Matla a marang-rang ha a hloke ho ba qetellong ea marang-rang
Sehokelo sa CANbus
Litlhaloso tsa Tekheniki
Phepelo ea motlakase
| Keletso voltage | 12VDC kapa 24VDC |
| Sebaka se lumelletsoeng | 10.2VDC ho 28.8VDC e nang le ripple e ka tlase ho 10%. |
| Max. tshebediso ya jwale | |
| 12VDC | 470mA |
| 24VDC | 230mA |
| Tšebeliso e tloaelehileng ea matla | 5.1W |
Betri
| Ntlafatsa | Lilemo tse 7 tse tloaelehileng ho 25 ° C, bekapo ea betri bakeng sa RTC le data ea sistimi, ho kenyelletsa le data e fapaneng |
| Ho nkela sebaka | E, ntle le ho bula molaoli. |
Skrine ea Pontšo ea Graphic
| Mofuta oa LCD | Graphic, monochrome e ntšo le e tšoeu, FSTN |
| Bontša qeto, lipikselse | 320×240 (QVGA) |
| Viewsebaka | 5.7″ |
| Skrine se thetsoang | Ho hanyetsa, analogue |
| Phapang ea skrine | Ka software (Boleng ba polokelo ho SI 7) Sheba sehlooho sa Thuso sa VisiLogic Setting LCD Contrast. |
Lenaneo
| Memori ya tshebediso | 1000K | ||
| Mofuta oa operand | Bongata | Letšoao | Boleng |
| Likotoana tsa memori Lintlha tsa Memori Linomoro tse telele Mantsoe a Habeli Mehopolo E phaphamala Lisebelisoa tsa nako Libali |
4096 2048 256 64 24 192 24 |
MB MI ML DW MF T C |
Bit (khola) 16-bit 32-bit 32-bit e sa saenneng 32-bit 32-bit 16-bit |
| Litafole tsa Lintlha Lipontšo tsa HMI Nako ea ho hlahloba lenaneo |
120K (matla)/ 192K (static) Ho fihlela ho 255 30μsec ka 1K ea ts'ebeliso e tloaelehileng |
||
Puisano
Lintlha:
COM 1 e tšehetsa RS232 feela.
COM 2 e kanna ea hlophisoa hore e be RS232/RS485 ho latela litlhophiso tsa jumper joalo ka ha ho bonts'itsoe ho Tataiso ea ho Kenya ea sehlahisoa. Boemo ba feme: RS232.
Ke / Os
| Ka mojule | Palo ea li-I/O le mefuta e fapana ho ea ka mojule. E ts'ehetsa ho fihla ho 171 dijithale, lebelo le phahameng, le li-I/O tsa analoge. |
| Snap-in I/O modules | E hokela koung e ka morao; e fana ka tlhophiso ea I/O ka botong. |
| Li-module tsa katoloso | Ka adaptara, sebelisa ho fihla ho 8 I/O Katoloso ea Li-module tse kenyelletsang ho fihla ho 128 tse ling tsa I/O. Palo ea li-I/O le mefuta e fapana ho ea ka mojule. |
Litekanyo
| Boholo | 197X146.6X68.5mm ) X 7.75 ” “75.7 X2.7”) |
| Boima ba 'mele | 750g (26.5 oz) |
Ho phahamisa
| Ho kenya liphanele | Ka masakana |
Tikoloho
| Ka hare ho cabinet | IP20 / NEMA1 (nyeoe) |
| Panele e kentsoeng | IP65 / NEMA4X (phanele e ka pele) |
| Mocheso oa ts'ebetso | 0 ho isa ho 50ºC (32 ho isa ho 122ºF) |
| Mocheso oa polokelo | -20 ho 60ºC (-4 ho 140ºF) |
| Mongobo o Batlang (RH) | 5% ho isa ho 95% (ha e fokotsehe) |
Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unironic e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho tlosa ka ho sa feleng kapa ka nakoana. tse furallang mmarakeng.
Lintlha tsohle tse tokomaneng ena li fanoe "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso tsa thekiso, ho sebetsa molemong o itseng, kapa ho se tlole molao. Unironic ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Ha ho ketsahalo e ke keng ea ikarabella bakeng sa litšenyehelo tse khethehileng, tsa tšohanyetso, tse sa tobang kapa tsa litlamorao tsa mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa mabapi le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena.
Mabitso a kgwebo, matshwao a kgwebo, matshwao a kgwebo, matshwao a ditshebeletso a hlahisitsweng tokomaneng ena, ho kenyeletswa le moetso wa ona, ke thepa ya Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro mme ha o a dumellwa ho di sebedisa ntle le tumello e ngotsweng pele. tsa Unitronics kapa batho ba bang bao e ka bang beng ba tsona
Litokomane / Lisebelisoa
 |
UNITRONICS Pono ea 120 Selaoli sa Monahano se Lekanyelitsoeng [pdf] Bukana ea Mosebelisi Vision 120 Programmable Logic Controller, Vision 120, Programmable Logic Controller, Logic Controller, Controller |
