Sehlopha sa TRANE TEMP-SVN012A-EN Low Temp Air Handling Unit

TLHOKOMELO TLHOKOMELO
Ke basebetsi ba tšoanelehang feela ba lokelang ho kenya le ho sebeletsa thepa. Ho kenya, ho qala, le ho sebeletsa lisebelisoa tsa ho futhumatsa, ho kenya moea le ho futhumatsa moea ho ka ba kotsi 'me ho hloka tsebo le koetliso e khethehileng. Lisebelisoa tse kentsoeng, tse lokisoang kapa tse fetotsoeng ka tsela e fosahetseng ke motho ea sa tšoaneleheng ho ka baka lefu kapa kotsi e mpe. Ha u sebetsana le thepa, hlokomela mehato eohle ea ho itšireletsa libukeng le ho tags, listikara, le lileibole tse khomaretsoeng thepa.

Selelekela

Bala bukana ena ka botlalo pele o sebetsa kapa o sebeletsa yuniti ena.

Ditemoso, Ditemoso, le Ditemoso
Likeletso tsa polokeho li hlaha bukeng ena kaofela ha ho hlokahala. Tšireletseho ea hau le ts'ebetso e nepahetseng ea mochini ona li itšetlehile ka ho lateloa ka thata ha litemoso tsena.

Mefuta e meraro ea likeletso e hlalosoa ka tsela e latelang:

TLHOKOMELO

E supa boemo bo ka bang kotsi, boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe.

TLHOKOMELO
E supa boemo bo ka bang kotsi, boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng. E ka boela ea sebelisoa ho lemosa khahlanong le mekhoa e sa sireletsehang.

TSEBISO
E bontša boemo bo ka fellang ka thepa kapa tšenyo ea thepa feela likotsi.

Matšoenyeho a Bohlokoa a Tikoloho
Liphuputso tsa saense li bontšitse hore lik’hemik’hale tse itseng tse entsoeng ke motho li ka ama lera la ozone la stratospheric le hlahang ka tlhaho lefatšeng ha li lokolloa sepakapakeng. Haholo-holo, tse ’maloa tsa lik’hemik’hale tse khethiloeng tse ka ’nang tsa ama lera la ozone ke lihatsetsi tse nang le Chlorine, Fluorine le Carbon (CFCs) le tse nang le Hydrogen, Chlorine, Fluorine le Carbon (HCFCs). Ha se lihatsetsi tsohle tse nang le metsoako ena tse nang le phello e tšoanang e ka bang teng tikolohong. Trane e buella tšebetso e nang le boikarabelo ea lihatsetsi tsohle.

Sehatsetsi sa Bohlokoa se Ikarabellang

Mekhoa
Trane e lumela hore mekhoa e nang le boikarabelo ea lihatsetsi e bohlokoa tikolohong, bareki ba rona le indastering ea ho futhumatsa moea. Litheknishiene tsohle tse sebetsanang le lihatsetsi li tlameha ho netefatsoa ho latela melao ea lehae. Bakeng sa USA, Molao oa Federal Clean Air Act (Karolo ea 608) o fana ka litlhoko tsa ho sebetsana, ho khutlisa, ho khutlisa le ho sebelisoa bocha ha lihatsetsi tse itseng le lisebelisoa tse sebelisoang lits'ebetsong tsena tsa lits'ebeletso. Ho feta moo, linaha kapa bomasepala ba bang ba ka ba le litlhoko tse ling tse tlamehang ho lateloa bakeng sa taolo e ikarabellang ea lihatsetsi. Tseba melao e amehang ’me u e latele.

TLHOKOMELO

Ho Hlokahala Wiring e Nepahetseng ea Tšimo le ho Thela fatše!
Ho hloleha ho latela khoutu ho ka baka lefu kapa kotsi e mpe. Lithapo tsohle tsa lebaleng li LOKELA ho etsoa ke basebetsi ba nang le litsebo. Lithapo tse kentsoeng ka mokhoa o fosahetseng le tse theiloeng fatše li baka likotsi tsa MOLELO le ELECTROCUTION. Ho qoba likotsi tsena, o TSHWANETSE ho latela ditlhoko tsa ho kenya mohala wa terata le ho thehwa fatshe jwalo ka ha ho hlalositswe ho NEC le dikhoutu tsa motlakase tsa lehae/setjhaba/setjhaba.

TLHOKOMELO

Thepa ea Tšireletso ea Motho (PPE) e ea Hlokahala!
Ho hloleha ho apara PPE e nepahetseng bakeng sa mosebetsi o ntseng o etsoa ho ka baka lefu kapa kotsi e mpe. Litheknishiene, e le hore li itšireletse likotsing tse ka bang teng tsa motlakase, tsa mechini le tsa lik'hemik'hale, LI TŠOANELA ho latela mehato ea tšireletso bukeng ena le mabapi le tags, listikara, le lileibole, hammoho le litaelo tse ka tlase:

• Pele ba kenya/sebelisa yuniti ena, litsebi li TLAMEHA ho apara PPE eohle e hlokahalang bakeng sa mosebetsi o etsoang (Ex.amples; seha liatlana/ matsoho a manganga, liatlana tsa butyl, likhalase tsa tšireletso, katiba e thata/bump cap, tšireletso ea ho oela, PPE ea motlakase le liaparo tsa arc flash). KA TSOHLE sheba Lipampiri tsa Lintlha tsa Tšireletso (SDS) le litataiso tsa OSHA bakeng sa PPE e nepahetseng.
• Ha u sebetsa ka lik'hemik'hale tse kotsi kapa haufi le tsona, KA TSOHLE u shebane le litataiso tse nepahetseng tsa SDS le OSHA/GHS (Global Harmonized System of Classification and Labeling of Chemicals) bakeng sa tlhahisoleseling mabapi le maemo a lumelletsoeng a ho pepeseha ha motho, ts'ireletso e nepahetseng ea phefumoloho le litaelo tsa ho sebetsana.
• Haeba ho na le kotsi ea ho kopana le motlakase o matlafalitsoeng, arc, kapa flash, litsebi li TŠOANELA ho apara PPE eohle ho latela OSHA, NFPA 70E, kapa litlhoko tse ling tse khethehileng tsa naha bakeng sa tšireletso ea arc flash, PELE ho sebeletsa yuniti. Le ka mohla u se ke ua FETOHA, HO KHAOTSA, KAPA BOLULOTAGHO TEKOA KA NTLE LE PPE E NEPAHETSENG EA MOHLASE LE LIAPARO TSA ARC FLASH. SEBELISA HORE LIMITA LE LISEBETSI TSA MOTLOTLO LI FEDISITSOE ARETHO E NEPAHETSENG BAKENG SA VOL E REETSOANG.TAGE.

TLHOKOMELO

 

Latela Maano a EHS!
Ho hloleha ho latela litaelo tse ka tlase ho ka baka lefu kapa kotsi e mpe.

• Basebetsi bohle ba Trane ba tlameha ho latela melaoana ea k'hamphani ea Tikoloho, Bophelo bo Botle le Polokeho (EHS) ha ba etsa mosebetsi o kang o chesang, motlakase, tšireletso ea ho oela, ho koala /tagout, refrigerant handling, etc. Moo melaoana ea lehae e leng thata ho feta maano ana, melaoana eo e nka sebaka sa maano ana.
• Basebetsi bao eseng ba Trane ba tlameha ho latela melaoana ea lehae ka linako tsohle.

TLHOKOMELO
Mekhoa ea Ts'ebeletso e Kotsi!

• Ho hloleha ho latela litemoso tsohle tse bukeng ena le ho tags, listikara le lileibole li ka fella ka lefu kapa kotsi e mpe.
• Litheknishiene, e le hore li itšireletse likotsing tse ka bang teng tsa motlakase, tsa mechini le tsa lik'hemik'hale, LI TŠOANELA ho latela mehato ea tšireletso bukeng ena le mabapi le tags, listikara le lileibole, hammoho le litaelo tse latelang: Ntle le ha ho boletsoe ka tsela e 'ngoe, khaola matla ohle a motlakase ho kenyeletsoa ho khaolla ka remoutu le ho ntša lisebelisoa tsohle tse bolokang matla joalo ka li-capacitor pele u sebeletsa. Latela ho koala ka nepo/tagtsoa mekhoa ea ho netefatsa hore matla a ke ke a matlafatsoa ka boomo. Ha ho hlokahala ho sebetsa ka lisebelisoa tsa motlakase tse phelang, e-ba le ramotlakase ea nang le mangolo kapa motho e mong ea koetliselitsoeng ho sebetsana le likarolo tsa motlakase tse phelang a etsa mesebetsi ena.

TLHOKOMELO

Voltage!
Ho hloleha ho tima motlakase pele ho ts'ebeletso ho ka baka lefu kapa kotsi e mpe. Hakolla matla ohle a motlakase, ho kenyeletsoa le likhokahano tse hole pele u sebeletsa. Latela ho koala ka nepo/tagtsoa mekhoa ea ho netefatsa hore matla a ke ke a matlafatsoa ka boomo. Netefatsa hore ha ho na motlakase o teng ka voltmeter.

TLHOKOMELO

• Likarolo Tsa Motlakase Tse Phelang!
• Ho hloleha ho latela litemoso tsohle tsa polokeho ea motlakase ha o pepesetsoa likarolo tsa motlakase o phelang ho ka baka lefu kapa kotsi e mpe.
• Ha ho hlokahala ho sebetsa ka likarolo tsa motlakase tse phelang, ho be le ramotlakase ea nang le mangolo kapa motho e mong ea koetlisitsoeng hantle ho sebetsana le likarolo tsa motlakase tse phelang a etse mesebetsi ena.

TLHOKOMELO
Phahamiso e sa Tšoanelang Yuniti!

• Ho hloleha ho phahamisa yuniti hantle boemong ba LEVEL ho ka fella ka ho theoha ha yuniti mme mohlomong ho pshatla opareitara/setegeniki se ka bakang lefu kapa kotsi e mpe, le thepa kapa tšenyo ea thepa feela.
• Lekola yuniti ea lifti e ka bang 24 cm (61 cm) ho netefatsa setsi se nepahetseng sa sebaka sa phahamiso ea khoheli. Ho qoba ho theoha ha yuniti, beha sebaka sa ho phahamisa sebaka hape haeba yuniti e sa lekana.

Likarolo Tse Potolohang!

• Hakolla matla ohle a motlakase, ho kenyeletsoa le likhokahano tse hole pele u sebeletsa. Latela ho koala ka nepo/tagtsoa mekhoa ea ho netefatsa hore matla a ke ke a matlafatsoa ka boomo.

Selelekela

Bukana ena ea ho instola e etselitsoe feela litsi tsa khiriso ho tsoa ho Trane Rental Services ea tharollo ea nakoana ea ho pholisa.

Tokomane ena e kenyelletsa:

• Litlhoko tsa mochini, motlakase, le tlhaloso e qaqileng ea mekhoa ea ts'ebetso.
• Ho qala, ho kenya lisebelisoa, litataiso tsa ho rarolla mathata, le tlhokomelo.

Ikopanye le Trane Rental Services (TRS) bakeng sa boteng ba thepa pele o odara thepa ea khiriso. Thepa e fumaneha ka lekhetlo la pele, empa e ka bolokoa ka tumellano ea khiriso e saennoeng.

Tlhaloso ea Nomoro ea Mohlala

• Digit 1, 2 - Unit Model
  RS = Litšebeletso tsa khiriso
• Digit 3, 4 - Mofuta oa Yuniti
  AL = Setsi sa Ts'ebetso ea Moea (Mocheso o tlase)
  Digit 5, 6, 7, 8 - Nominal Tonnage 0030 = Lithane tse 30
• Digit 9 - Moqtage
  F = 460/60/3
• Digit 10 - Tatelano ea Moralo 0 ho isa ho 9
  Digit 11, 12 — Moqapi ea Keketsang AA = Moqapi ea Keketsang

Mehopolo ea Likopo

Metsing

• Likarolo tsa ho sebetsana le moea o tlase li lokela ho sebelisoa feela lits'ebetsong tse sirelelitsoeng hantle.
• Likarolo tsa ho tšoara moea o tlase li etselitsoe ka ho khetheha lisebelisoa tsa mofuta oa sehatsetsi moo ho hlokahalang bakeng sa mocheso o ka tlase ho 32°F. Lits'ebetsong tsena, tšebeliso ea glycol e khothaletsoa haholo.
• Thepa ena e etselitsoe hore e behoe ka tlung. Mehato e khethehileng e tlameha ho nkuoa ho tsamaisa likhoele tsa drainage ho ea sebakeng se nepahetseng sa moaho.

Sebaka sa moea
Mefuta e meng ea mefuta ea li-unit tse sebetsanang le moea (AHU) e khona ho fana ka molumo o sa feleng sebakeng (li-unit tsa F0). Mehato e khethehileng e lokela ho nkoa e le hore lits'ebetsong tse ka holimo ho 32 ° F, fene e se ke ea feta lebelo la sefahleho la 650 FPM ho thibela ho phalla ha mongobo.

Bohlokoa: Liyuniti tse ling ha li na bokhoni ba VFD. Ho feto-fetoha ha moea ho ka finyelloa feela ka ho thibela ho phalla ha moea. Ikopanye le Trane Rental Services bakeng sa litlhahiso mabapi le ho phetha mosebetsi ona. Li-AHU tsa mofuta oa F1 li na le bokhoni ba ho fetola moea kaha li na le VFD le se qalang se bonolo.

• Yuniti ena ha e na likhokahano tsa moea tse khutlang. Li na le bokhoni ba ho hokahana le adaptara e telele ea ho lahlela (li-unit tsa F0) kapa likhokahano tse 'nè tsa 20-inch (F1 units) ho tsamaisa moea oa phepelo sebakeng seo u se khethang.

Phekolo ea Metsi
Tšila, sekala, lihlahisoa tsa kutu, le lintho tse ling tse tsoang kantle ho naha li tla ama phetiso ea mocheso hampe. Ke mokhoa o motle oa ho kenya li-strainers holimo ho li-coil tse pholileng ho thusa ho fetisa mocheso hantle.

Lisebelisoa tse ngata tsa AHU
E le ho thibela phokotso ea phepelo ea moea ka lebaka la likhoele tse hoammeng tse ngata haholo, yuniti e etsa hore ho be le nako ea nako ea ho felloa ke serame. Ha potoloho e ntse e tsoela pele, fan e tla tima 'me ho ke ke ha fanoa ka pholileng. E le ho tsoelapele ho fihlela litlhoko tsa mojaro oa moaho TRS e khothaletsa tšebeliso ea bonyane AHU e le 'ngoe ea tlatsetso ho kopana le moroalo oa pholiso ea moaho ha li-unit(li) tse ling li le mocheng oa ho thella.

Lintlha tse akaretsang

Labels	Boleng
Nomoro ea Mohlala	PCC-1L-3210-4-7.5
Maemo a Ts'ebetso a Ambient	-20°F ho isa ho 100°F(a)

• Bakeng sa maemo a tikoloho a ka tlase ho 40°F, glycol e khothaletsoa.

Lintlha tsa Airside

Labels	Boleng
Hlakola Tlhophiso ea Moea	E tshekaletseng
Flex Duct Connection Qty le boholo	(1) 36 in. round(a) (F0) units(4) 20 in. round (F1) units
Phallo ea Moea ka Lebitso (cfm)	12,100(b)
Tlosa Khatello e tsitsitseng @ Nominal Airflow	1.5 in. ESP
Boholo ba Phallo ea Moea (cfm)	24,500
Tlosa Khatello e tsitsitseng @ Maximum Airflow	0.5 in. ESP

• Ka adaptara e telele ea ho lahlela.
• Phallo ea moea ea 'nete e ipapisitse le tlhokahalo ea khatello ea kantle e sa fetoheng. Ikopanye le Trane Rental Services bakeng sa phallo e khethehileng ea moea le leseli la khatello e sa fetoheng.

Lintlha tsa Motlakase

Labels	Boleng
Phepelo ea Boholo ba Motor	7.5 hp/11 A
Potoloho ea Heater	EA-37,730 W / 47.35 A.
Phepelo lebelo la Motor	1160 rpm
Fused Disconnect/Circuit Breaker	Ee
Palo ea Lipotoloho tsa Motlakase	1
Moqtag460V	3-mohato
Khafetsa	60 Hz
Bonyane ba Potoloho Amptoropo (MCA)	61 A
Tšireletso e Felletseng ka ho Fetisisa (MOP)	80 A

Letlapa la 1. Bokhoni ba li-coil

Hlokomela: Bakeng sa tlhahisoleseding e eketsehileng ka motlakase ikopanye le Trane Rental Services.

Lintlha tsa Waterside

TSEBISO
Tšenyo ea Metsi!

• Ho hloleha ho latela litaelo tse ka tlase ho ka baka tšenyo ea metsi.
• Ha karolo e fetang e le 'ngoe e na le pan ea drain, tšoasa karolo ka 'ngoe ka bonngoe. Ho hokela li-drain tse ngata moleng o tloaelehileng ka leraba le le leng feela ho ka fella ka ho bolokoa ha condensate le tšenyo ea metsi ho sebapi sa moea kapa sebaka se kopaneng.

Labels	Boleng
Boholo ba Khokelo ea Metsi	2.5 ho
Mofuta oa Khokahano ea Metsi	Grooved
Hlapa Pipe size	2.0 in. (F0 Units) 3/4 in. (F1 Units)
Mofuta oa Khokahano ea Pipe ea Drin	Internal Pipe Thread (F0 Units) Garden Hose (F1 Units)

Letlapa la 1. Bokhoni ba li-coil

Koele Mofuta	Ho kena/ Ho tloha Mocheso oa Metsi (°F)	Metsi Phallang (gpm)	Khatello ea Khatello (e felletseng ea H₂O)	Ho kena/ Ho tloha Moea Mocheso (°F)	Koele Bokhoni (Btuh)
Metsi a Khatselitsoeng	0/3.4	70	16.17	14/6.8	105,077
	0/3.9	90	17.39	16/9.7	158,567
	0/3.1	120	27.90	16/9.4	166,583

Lintlha:

• Khetho e thehiloeng ho karolo ea 50 lekholong ea tharollo ea propylene glycol / metsi.
• Ho hlokahala khetho bakeng sa ts'ebetso ea 'nete ea AHU.
• Ikopanye le Trane Rental Services bakeng sa tlhaiso-leseling e khethehileng ea khetho.
• Khatello e phahameng ea metsi ke 150 psi (2.31 'H₂O = 1 psi).

Likaroloana

F0

• Coil ea motlakase e qhibiliha ka timer le valve ea 3-way actuated bakeng sa sepheo sa coil bypass
• Hlatsoa pan e futhumetseng ka motlakase

F1
Coil ea motlakase e qhibiliha ka timer le valve ea 3-way actuated bakeng sa sepheo sa coil bypass

• Hlatsoa pan e futhumetseng ka motlakase
• Lesaka le letšo le koahetsoeng ka lipokotho tsa fereko
• Khabinete ea taolo ea motlakase (NEMA 3R)
• Fana ka plenum e nang le likotopo tse 'ne, tse 20-inch
• Rack e nang le li-filters tse 12, 20x16x2-inch
• Daisy ketane e khonang

Litekanyo le Boima

TLHOKOMELO
Phahamiso e sa Tšoanelang Yuniti!
Ho hloleha ho phahamisa yuniti hantle maemong a LEVEL ho ka baka hore yuniti e theohe 'me mohlomong ho pshatle opareitara/setegeniki ho ka fella ka lefu kapa kotsi e mpe, le thepa kapa tšenyo ea thepa feela. Lekola yuniti ea lifti e ka bang 24 cm (61 cm) ho netefatsa setsi se nepahetseng sa sebaka sa phahamiso ea khoheli. Ho qoba ho theoha ha yuniti, beha sebaka sa ho phahamisa sebaka hape haeba yuniti e sa lekana.

Letlapa la 2. Litekanyo le Boima ba Yuniti

Yuniti	RSAL0030F0	RSAL0030F1AA-CO	RSAL0030F1CP-CY
Bolelele	9 ft. 6 ho.	8 ft. 6 ho.	8 ft. 5.5 ho.
Bophara ntle le Adapter ea Nako e Telele	4 ft. 4 ho.	5 ft. 5 ho.	6 ft. 0 ho.
Bophara bo nang le Adapter ea Long Lahlela	6 ft. 0 ho.	—	—
Bophahamo	7 ft. 2 ho.	7 ft. 3 ho.	7 ft. 9 ho.
Boima ba ho Romela	lik'hilograma tse 2,463.	lik'hilograma tse 3,280.	lik'hilograma tse 3,680.

Hlokomela: Sesebelisoa sa ho Phahamisa: Forklift kapa Crane.

Setšoantšo sa 1 RSAL0030F0

TLHOKOMELOTAGE – 460 V, 60Hz, 3PH MCA (MIN CIRCUIT AMPACITY) = 61 AMPS MOP (TŠIRELETSO E FETILENG FETA) = 80 AMPS UNIT POVER CONNECTIONS 45 8/4 MOFUTA V POVER COD E KENYELETSOE

• LIEKETSENG MOEA
  DISCHARGE AIR CONFIGURATION – HORIZONTAL DISCHARGE AIR OPENING QTY & SIZE = (1) 36 ICH RUND NOMINAL AIR FLOV = 12,100 CFM STATIC PRESSURE e NOMINAL AIR FLOV – 1.5 INCHES ESP MAXIVATIC24,500 CFLOV MAXIMUM 0.5CF AIR PRESSURE e MAX AIR FLOV = XNUMX INCHES ESP
• VATERSIDE DATA
  VATER Connection SIZE - e le INCH VATER CONNECTION TYPE = GROOVED DRAIN PIPE SIZE = 2 inch DRAIN PIP Connection MOFUTA = HARAKARE THREAD SHIPPING VEIGHT = 2,463 LBS.

Setšoantšo sa 2 RSAL0030F1AA-CO TLHOKOMELOTAGE = 4SOV, 60Hz, 3PH MCA (MIN CIRCUIT AMPACITY) - 61 AMPS MOP (MAX OVERCURRENT PROTECTION) - joalo AMPS UNIT POVER CONNECTIONS LEVITON CAM-TYPE PLUG-IN CONNECTIONS (16 SERIES) 3 POVER (II, L2, 1.3) LE 1 GROUND (G) TSENA LI AMOHELA MOFUTA O TLOANOANG OA CAM-MOFUTA RECEPTACLE DAISY-CHAIN ​​HO TSOA-TSA TŠEBELETSO MAKHOKANO (16 SERIES) 3 POVER (1-1, 1-2, 1.3) LE 1 GROUND (G) TSENA LI AMOHELA PLUG-IN E TOPANANG EA MOFUTA WA CAM

• LIEKETSENG MOEA
  DISCHARGE AIR CONFIGURATION – HORIZONTAL FLEX DUCT CONNECTION QTY & SIZE – (4) 20 INCH RUND NOMINAL AIR FLOV – 12,100 CFM STATIC PRESSURE e NOMINAL AIR FLOV – 1.5 INCHES ESP MAXIVATIC24,500CFAIR XNUMXCF - XNUMX FI PRESSURE e MAX AIR FLOV - OS INCHES ESP
• VATERSIDE DATA
  VATER Connection SIZE - e le INCH VATER CONNECTION TYPE - GROOVED DRAIN PIPE SIZE - 3/4 Inch DRAIN PIP Connection TYPE = HARE THREAD GARDEN HOSE SHIPPING VEIGHT - 3,280 LBS, FORK POCKET x7.5 DIMENSION.

Setšoantšo sa 3. RSAL0030F1CP-F1CY

TLHOKOMELOTAGE – 460V, 60Hz, 3PH MCA (MIN CIRCUIT AMPACITY) = 61 AMPS MOP TŠIRELETSO E PHETHAHETSENG) = eo AMPS

• LIEKETSENG POVER
  LEVITON CAM-TYPE PLUG-IN CONNECTIONS (16 SERIES) 3 POVER (II, L2, 1-3) LE 1 GROUND (G) TSENA LI AMOHELA RECEPACLE YA MOFUTA WA CAM .
• DAISY-Ketane E TSOA-TSOANG POVER MAHOKETSO
  LEVITON CAM-TYPE PLUG-IN CONNECTIONS (16 SERIES) 3 POVER (1-1, 1-2, 1-3) LE 1 GROUND (G) TSENA LI AMOHELA PLUG-IN YA MOFUTA WA CAM .
• LIEKETSENG MOEA
  DISCHARGE AIR CONFIGURATION = HORIZONTAL FLEX DUCT CONNECTION QTY & SIZE = (4) 20 INCH RUND NOMINAL AIR FLOV = 12,100 CFM STATIC PRESSURE e NOMINAL AIR FLOV = 1.5 INCHES ESP MAXIMIC24,500 AIR SUE = FLOV MAXIMUT0.5, FLOV XNUMX FEELA MAX AIR FLOV = XNUMX INCHES ESP
• LETSATSI LA METSI
  VATER CONNECTION SIZE - e le INCH VATER CONNECTION TYPE = GROOVED DRAIN PIPE SIZE = 3/4 Inch DRAIN PIP Connection TYPE = HARE THREAD GARDEN HOSE SHIPPING VEIGHT - 3,680 LBS. LITEKELO TSA FORK PACKET – 7.5′ x 3.5′

Mekhoa ea ts'ebetso

Setšoantšo sa 4. Li-unit tsa F0

TLHOKOMELO

• Voltage!
• Ho hloleha ho tima motlakase pele ho ts'ebeletso ho ka baka lefu kapa kotsi e mpe.

TLHOKOMELO

• Likarolo Tsa Motlakase Tse Phelang!
• Ho hloleha ho latela litemoso tsohle tsa polokeho ea motlakase ha o pepesetsoa likarolo tsa motlakase o phelang ho ka baka lefu kapa kotsi e mpe.
• Ha ho hlokahala ho sebetsa ka likarolo tsa motlakase tse phelang, ho be le ramotlakase ea nang le mangolo kapa motho e mong ea koetlisitsoeng hantle ho sebetsana le likarolo tsa motlakase tse phelang a etse mesebetsi ena.

Mokhoa oa Matla	Tlhaloso
A	Matla a masimong a etella pele ho hokela ho li-terminals L1-L2-L3 ka lehlakoreng le kenang la sekhechana se seholo sa potoloho.
	Koala sesebelisoa sa mantlha sa ho hakolla ho matlafatsa mochini oa fan fan, heater le li-circuits tsa taolo. Ha lebone la matla a matala le bulela, matla a 115V a fanoa ho potoloho ea taolo.
	Bula senotlolo se seholo ho tlosa motlakase ho yuniti. Lebone la matla le tla tima.
	The on-off switch e tlameha ho buloa bakeng sa mekhoa ea sehatsetsi le ea defrost. The on-off switch e ke ke ea ama matla kapa mekhoa ea ho potoloha. Senotlolo sa ho tima ha se hakoe motlakase.

Ho potoloha Mokhoa	Tlhaloso
B	Matla a lebaleng a etellang pele L1-L2-L3 a fana ka matla ho L1-L2-L3 ho leihlo la mohato.
	Mohlahlobi oa mohato o lekola phepelo ea motlakase e kenang bakeng sa mohato o nepahetseng le voltage. Yuniti e ke ke ea sebetsa ntle le ha mekhahlelo e meraro e le teng, 'me e le mohato o nepahetseng.
	Koala sesebelisoa se seholo sa ho hakolla ho beha yuniti mokhoeng oa ts'ebetso. Sheba lebone le potolohang. Haeba lebone la ho potoloha le butswe, mekhahlelo ea phepelo ea motlakase e felile ka tatelano 'me mochini oa fene o tla khutlela morao. Koala sesebelisoa se seholo sa ho hakolla 'me u fetole lithapo life kapa life tse peli tse kenang (mohlala, lebala la terata le isa L1 ho terminal L2, le lead lead L2 ho terminal L1).
	Haeba ho khutlisa lisebelisoa tsa motlakase ho hloleha ho tima lebone la potoloho, joale ho na le tahlehelo ea karolo kapa voltage ho se leka-lekane pakeng tsa maoto. Seta bocha sekhechana se seholo sa potoloho.
	Sheba lintlha tse 15 amp phase monitor fuse, 'me u nke sebaka ha ho hlokahala. Haeba lebone la ho potoloha le ntse le butswe ha motlakase o nyoloha, ho na le bothata mabapi le phepelo ya motlakase mme e tlameha ho lokiswa.
	Haeba lebone la matla le khantšitsoe, 'me lebone la ho potoloha le tima, yuniti e fuoa matla 'me phetoho ea fan e nepahetse.

Kheloha Mokhoa	Tlhaloso
C	Hlokomela: Motlakase oa defrost cycle ke oache ea nako e qalileng mme mocheso o felisitsoe. Rulahanya sebali sa nako le sebatli se feto-fetohang sa fene ea ho tima sehatsetsi se liehisang litlhophiso tsa thermostat ho latela tlhoko ea khoele ka 'ngoe e pholileng.
	Yuniti e ea senyeha ha mabone a matla le a defrost a khantšitsoe.
	Potoloho ea defrost e tla matlafatsa terminal 3 ka oache ea nako ho sehokelo sa heater kapa HC-1, control relay CR-1, 'me mochini oa actuator o tla beha valve ea litsela tse 3 sebakeng se bulehileng.
	Lifuthumatsi, tse behiloeng ka har'a li-coil turbo spacers ka har'a pakete ea fin, li futhumatsa mapheoana ho qhibilihisa serame se bokelletsoeng.
	Ha khoele e fihla boemong ba mocheso oa thermostat ea defrost termination TDT-1, RY e etsoa hore e qale. Nako ea ho emisa defrost le ho khutlela mokhoeng oa ho pholisa. Sebali sa defrost se na le kemiso ea nako e felileng ho raha khoele hore e se ke ea senyeha ka mor'a nako e behiloeng. Nako ea metsotso e 45 ea ho tsoa e khothaletsoa e le ts'ehetso ea pheliso ea TDT-1.

Sehatsetsi Mokhoa	Tatelano ya Tshebetso
D	Yuniti e ntse e tsidifala haeba motlakase le mabone a sehatsetsi a butswe.
	Fana ka matla ho tloha ho terminal 4 ka oache ea nako ho ea ho sehokahanyi sa motor MS-1 le koloi ea 3-way valve actuator motor ho ea sebakeng se koetsoeng.
	Motlakase oa motlakase MS-1 oa potoloho o matlafatsa ha potoloho e etsoa ka tieho ea fan ea thermostat TDT-1 RB.
	Yuniti e tla tsoelapele ka mokhoa oa ho pholisa ho fihlela sebali sa nako ea defrost se kenya tšebetsong potoloho ea defrost.

(F1) Diyuniti

Mekhoa e meraro ea mantlha ea ts'ebetso

Mokhoa	Tlhaloso
LETSELA/ LATELA	Kopanya le baesekele ea defrost. Sesebelisoa se etselitsoe ts'ebetso ea mocheso o tlase hangata bakeng sa lits'ebetso tse ka tlase ho 32 ° F. Seta: fetola yuniti ea pele ho eona MOELETSI ebe o beha yuniti ea bobeli ho LATELA. Banyalani ba lokela ho sebetsa hammoho. Ho ipapisitse le boemo ba switch switch ea fan ho mochini oa fan oa khabinete ea taolo ke VFD kapa BYPASS (qalo e bonolo). Bohlokoa: Le ka mohla u se ke ua fetola sebali sa nako ea defrost nako e telele ho feta boleng ba nako ea ho pholisa.
MOELETSI	Mokhoa o ikemetseng o nang le potoloho ea defrost. Yuniti e etselitsoe ho sebetsa ka mokhoa o ikemetseng bakeng sa lits'ebetso tse ka tlase ho 32° F. Ho ipapisitse le boemo ba switch switch ea fan ho mochini oa fan oa khabinete ea taolo ke VFD kapa BYPASS (qalo e bonolo).
AH	• Mokhoa o ikemetseng ntle le potoloho ea defrost. Yuniti e etselitsoe ho sebetsa ka mokhoa o ikemetseng bakeng sa lits'ebetso tse kaholimo ho 32° F. Koala sekhechana sa ho futhumatsa motlakase (60 amp.) e fumanehang ka hare ho khabinete ea taolo. Fetolela sebali sa defrost ho boemo ba boleng ba nako e tlase haholo. Ho ipapisitse le boemo ba switch switch ea fan ho mochini oa fan oa khabinete ea taolo ke VFD kapa BYPASS (qalo e bonolo).

Mokhoa	Tatelano ya Tshebetso
LETSELA/ LATELA	Li-unit li tsamaea ka thapo ea puisano e tšehla (e kentsoeng tšimong). Mohala o na le lithapo tse peli, tse hlano holim'a mohala o mosehla oa maoto a 30. Hokela thapo ka lehlakoreng la phanele ea taolo. Mohala ke oa puisano feela lipakeng tsa LTAH tse peli bakeng sa LETSELA/ LATELA mokhoa oa ts'ebetso 'me ha oa lokela ho sebelisoa bakeng sa ts'ebetso e ikemetseng. Matlafatsa - haeba thermostat e hloka ho pholile, the MOELETSI yuniti e sebetsa ka matla a ho pholisa ka botlalo ka metsotso e 50, ebe ka nako e le 'ngoe e fetoha ka botlalo ho defrost matla ka metsotso e 20. Hlokomela: Setting bakeng sa ho pholile ka ho feletseng le defrost capacity e ka fetoha ho tloha metsotsoana e 0.05 ho ea ho lihora tse 100 empa feme e behiloe metsotso e 50. Thermostat e romela lets'oao ka mohala oa puisano ho ea ho LATELA unit ho qala potoloho ea ho pholisa. Kamora hore nako ea potoloho ea defrost e fete, the MOELETSI unit e lula e sa sebetse ho fihlela LATELA yuniti e qala potoloho ea defrost mme e romela lets'oao ho khutlela ho MOELETSI unit ho qala ho pholisa le ho potoloha hape. The LATELA unit e lula e sa sebetse ho fihlela yuniti ea LEAD e romela lets'oao la 120V ka thapo ea likhokahano e qalang potoloho ea ho pholisa. Ka metsotso e 50, the LATELA yuniti e sebetsa ka mokhoa o felletseng oa ho pholisa. Ka mor'a potoloho ea metsotso e 50 ea ho pholisa, ho LATELA unit e kena potolohong ea metsotso e 20 ea defrost ebe e romela lets'oao la 120V ka thapo ea likhokahano ho khutlela ho MOELETSI unit ho qala potoloho ea ho pholisa. The LATELA unit e tla qeta potoloho ea defrost, 'me e lule e sa sebetse ho fihlela e khothalletsoa ho qala hape Hlokomela: Linako tsohle li ka fetoloa sebakeng. Ho phodisa potoloho - valve ea bypass e tla matlafatsa 'me metsi a batang a tla phalla ka har'a coil ea unit. Defrost cycle le ho se sebetse - valve ea bypass e fana ka matla (selemo se koala) 'me se khelosa ho phalla ha metsi a pholileng ho ea karolong ea bobeli ka lehlakoreng la liphaephe tsa 3-inch tsa LTAH. Defrost cycle - li-coil le condensate drainage pan heat elements li tla matlafatsa nako e behiloeng ea ho qhibiliha yuniti. Hlokomela: Feme e behiloe metsotso e 20 empa e ka fetoloa. Paesekele ena e sa sebetseng e tsoela pele ka nako e sa lekanyetsoang ho latela litlhophiso tsa nako. Ho palama baesekele ho tloha yuniti e 'ngoe ho ea ho e' ngoe ho boloka matla a ho pholisa a hlokahalang ho thibela mocheso sebakeng. Defrost mode e tla qhibilihisa leqhoa holim'a coil e pholileng.
MOELETSI	Matlafatsa - ha thermostat e hloka ho pholile, valve ea bypass e fana ka matla, metsi a pholileng a phalla ka har'a coil, 'me fan ea hlaha. Potoloho ea ho pholisa e tla tsoelapele ho fihlela nako e behiloeng esale pele e felile 'me yuniti e kena mocheng oa defrost. Defrost cycle - fan ea tima, valve ea bypass e fana ka matla (selemo se koala) 'me lisebelisoa tsa ho futhumatsa tsa motlakase li matlafatsa.Hlokomela: Feme e behiloe metsotso e 20 empa e ka fetoloa. Ka mor'a hore nako ea defrost e felile, LTAH e khutlela nakong ea pholileng. Ho palama baesekele ho tloha ha ho pholile ho ea ho defrost ho tsoela pele ho fihlela thermostat e khotsofetse. Ho fetola tatelano ea nako, sheba karolo ea TIMERS.
AH	Matlafatsa - thermostat e hloka ho pholile, valve ea bypass e fana ka matla, 'me fan ea qala. Ka mor'a hore thermostat e khotsofatsoe, fene ea tima, valve ea bypass e theola matla 'me e khutlisetsa tsela ea metsi a pholileng ho potoloha khoele e pholileng. Yuniti e ke ke ea potoloha ho tloha ho pholile ho ea ho futhumatsang.

Litaelo tsa ho Kenya le ho Qala

TLHOKOMELO
Mekhoa ea Ts'ebeletso e Kotsi! Ho hloleha ho latela litemoso tsohle tse bukeng ena le ho tags, listikara le lileibole li ka fella ka lefu kapa kotsi e mpe. Litheknishiene, e le hore li itšireletse likotsing tse ka bang teng tsa motlakase, tsa mechini le tsa lik'hemik'hale, LI TŠOANELA ho latela mehato ea tšireletso bukeng ena le mabapi le tags, listikara le lileibole, hammoho le litaelo tse latelang: Ntle le ha ho boletsoe ka tsela e 'ngoe, khaola matla ohle a motlakase ho kenyeletsoa ho khaolla ka remoutu le ho ntša lisebelisoa tsohle tse bolokang matla joalo ka li-capacitor pele u sebeletsa. Latela ho koala ka nepo/tagtsoa mekhoa ea ho netefatsa hore matla a ke ke a matlafatsoa ka boomo. Ha ho hlokahala ho sebetsa ka lisebelisoa tsa motlakase tse phelang, e-ba le ramotlakase ea nang le mangolo kapa motho e mong ea koetliselitsoeng ho sebetsana le likarolo tsa motlakase tse phelang a etsa mesebetsi ena.

1. Lekola likarolo tsa AHU tse kenyelletsang li-screw tsa fan bushing set, liboutu tsa motlakase, terata ea motlakase, sets'oants'o sa phanele ea taolo, le matšoao a tšenyo ea coil.
   TLHOKOMELO
   Likarolo Tse Potolohang!
   Ho hloleha ho hakolla motlakase pele ho ts'ebeletso ho ka fella ka ho potlakisa ha setsebi sa ho rema le ho seha se ka fella ka lefu kapa kotsi e mpe.
   Hakolla matla ohle a motlakase, ho kenyeletsoa le likhokahano tse hole pele u sebeletsa. Latela ho koala ka nepo/tagtsoa mekhoa ea ho netefatsa hore matla a ke ke a matlafatsoa ka boomo.
   Adapter e telele ea ho lahlela kapa molebeli oa fan e lokela ho ba teng ka linako tsohle ho thibela ho kopana ka phoso le lehare la fan.
2. Haeba adaptara e telele ea ho akhela kapa tšireletso ea fene e hloka ho fetoloa kapa ho kengoa, netefatsa hore matla ohle a motlakase yuniti a tingoe pele mosebetsi ofe kapa ofe o etsoa.
   • Ho tlosa kapa ho fetola, tlosa linate tse peli karolong e tlaase ka ho fetisisa ea molebeli kapa adaptara.
   • Ha u ntse u tšoere molebeli kapa adaptara ka letsoho le le leng, sebelisa letsoho le leng ho tlosa linate tse peli tse ka holimo. Sebelisa matsoho ka bobeli ho tlosa molebeli kapa adaptara.
3. Bakeng sa litsamaiso tse nang le oache ea defrost timer (li-unit tsa F0), netefatsa hore sebali sa nako se behiloe nako e nepahetseng ea letsatsi mme ho kentsoe lithapo tsa ho qala. Bakeng sa litsamaiso tse nang le nako ea elektronike (li-unit tsa F1), netefatsa hore li-daele tse nepahetseng li behiloe ka nako e nepahetseng.
4.  Ke khothaletso ea TRS ho hlahloba ka mahlo valve ea litsela tse 3 sebakeng se kenang hloohong ea coil ka toche le ho netefatsa hore valve e hlophisitsoe hantle. Ho etsa sena, opareitara e tla qala potoloho ea defrost mme a bule le ho koala li-unit tsa F0.
5. Ha o etsa dikgokelo tsa metsi, netefatsa hore di-fittings di kentswe le ho tiiswa ka nepo. Sena ke ho netefatsa hore ha ho na ho lutla ka har'a sistimi.
6.  Boloka sebaka se haufi le coil se butse ha u tlatsa mokelikeli ho lumella moea o qabeletsoeng ho tsoa. Koala valve ea moea hang ha mokelikeli o tsoa ka har'a valve 'me u hlahlobe hamore ea metsi ka har'a khoele.
7. Ka mor'a ho etsa likhokahano tsa metsi le ho sebelisa matla ho yuniti, lumella coil hore e be serame ebe ka bowena e etelletsa pele sebali sa nako ho qala potoloho ea defrost.
   Ela hloko cycle ea defrost ho bona hore na lisebelisoa tsohle li sebetsa hantle le hore coil ha e na serame kaofela pele tsamaiso e khutlela ho batang. Potoloho ea defrost e hlokahala feela ha serame se bokellana hoo se sitisang phallo ea moea ka khoele.
   Litlhoko tsa defrost li tla fapana ho kenngoeng ka 'ngoe mme li ka fetoha ho latela nako ea selemo le maemo a mang. Sheba karolo ea defrost ea tokomane ena bakeng sa lintlha tse ling mabapi le potoloho ea defrost.
8. Maemong a mang (F0) yuniti) ha yuniti e qala ho qala, mocheso oa kamore hangata o kaholimo ho mocheso o koalang oa thermostat ea fene (TDT-1 on wiring diagram). Ho matlafatsa li-fan ho ka 'na ha hlokahala ho kenya mohala oa nakoana oa jumper pakeng tsa li-terminals B le N. Hang ha mocheso oa kamore o le ka tlase ho +25 ° F terata ea jumper e lokela ho tlosoa.
9. Ha sistimi e sebetsa, hlahloba matla a phepelotage. Voltage e tlameha ho ba ka hare ho +/- 10 lekholong ea molumotage tšoauoa holim'a yuniti nameplate 'me mohato ho ea mohatong oa ho se leka-lekane e lokela ho ba liperesente tse 2 kapa ka tlase.
10. Sheba boemo ba thermostat ea kamore 'me u netefatse hore e sebetsa hantle.

Ts'ebetso ea Li-valve tse tharo

(F0) DiyunitiLikarolo tse sebetsanang le moea o tlase oa TRS li na le valve ea Apollo (F0) kapa Belimo (F1) 3-way actuating valve. Maemong a tloaelehileng a ts'ebetso, sena se maemong a tloaelehileng a koetsoeng. Ha ho na le serame se teng holim'a coil 'me ka mor'a hore mochine oa ho futhumatsa o buletsoe, actuator e tla matlafatsa. Sena se beha valve sebakeng se bulehileng se khelosa ho phalla ha mokelikeli ho pota-potile li-coil 'me ho qala potoloho ea defrost. Nako e laoloa ke thermostat e behiloeng ka har'a phanele ea taolo. Li-valve tsa actuating li lokela ho lekanyetsoa hantle fekthering. Haeba sena se sa lokisoa, ikopanye le TRS bakeng sa tlhaiso-leseling e batsi pele mosebetsi ofe kapa ofe o etsoa.

Fetola Li-Actuator tsa Motlakase ka Botsona
Laola boemo bo koetsoeng ba valve u sebelisa switch top le cam

1. Fetola sebaka se koetsoeng ka ho seta switch ea holimo pele.
2. Fetola shaft ea override ho fihlela actuator e koetsoe.
3.  Fetola khamera e kaholimo ho fihlela folete ea cam e lutse holim'a lever ea switch switch.
4.  Fetolela cam ho ea pele ho fihlela switch e tobetsa (e tsamaellanang le ts'ebetso ea switch), ebe u potoloha khamera ho fihlela switjha e tobetsa hape.
5. Tšoara boemo bona 'me u tiise sekoti se behiloeng holim'a khamera.

Laola boemo bo koetsoeng ba valve u sebelisa switch e ka tlase le cam

1.  Fetola sebaka se bulehileng ka ho seta switjha e ka tlase.
2.  Fetola shaft e fetelletseng ho fihlela actuator e bulehile.
3. Fetola khamera e tlase ho fihlela folete ea cam e lutse holim'a lever ea switch ea moeli.
4. Fetola khamera ho fihlela ha switjha e tobetsa (e tsamaellanang le ts'ebetso ea switjha), ebe u potoloha cam ho ea pele ho fihlela switch e tobetsa hape.
5.  Tšoara boemo bona 'me u tiise sekoti se behiloeng holim'a khamera.

Fetola actuator ntle le matla
Tobetsa tlase holim'a shaft e holimo e hokahaneng le lebokose la gear ea actuator ebe u potoloha shaft ka letsoho.

(F1) Units - Bypass Valve Positions
Setšoantšo sa 5. Boemo bo koetsoeng nakong ea selemo (bypass cycle)

Thermostat

(F0) Diyuniti
AHU e 'ngoe le e' ngoe e na le thermostat ea Danfoss e lumellang mosebelisi ho beha sebaka se lakatsehang se tlase (LSP). Mosebelisi a ka beha phapang e nepahetseng yuniti ka ho fetola boleng ba phapang le setpoint e phahameng ka ho fetisisa (HSP) bakeng sa ts'ebeliso. Sheba ka tlase mabapi le mokhoa oa ho sebelisa knob ea phetoho le spindle ea phapang ho thermostat.

Lethathamo la 3. Litekanyetso ho theha phapang

Phapang e phahameng ho tloswa e lekana le sebaka se tlase

HSP – DIFF = LSP

45° F (7° C) – 10° F (5° C) = 35° F (2° C)

Setšoantšo sa 7. Tatelano ea Thermostat ea kemiso ea ts'ebetso

(F1) Diyuniti
Taolo ea mocheso oa elektronike ea PENN A421 ke thermostat ea 120V SPDT e nang le mokhoa o bonolo oa ho tima / ho tima oa -40 ° F ho ea ho 212 ° F le e hahiloeng ka nako e thibelang nako e khutšoanyane e leng fektheri e behiloeng ho 0 (e holofetseng). Sensor ea mocheso e behiloe monyakong oa filthara ea ho khutla. The touch pad e na le likonopo tse tharo bakeng sa ho seta le ho lokisa. Lenaneo la motheo le lumella phetoho e potlakileng ea litekanyetso tsa mocheso oa ON le OFF, hammoho le mokhoa oa Sensor Failure mode (SF) le Anti-Short Cycle Delay (ASd) boleng.

Lethathamo la 4. Likhoutu tsa liphoso li hlalositsoe

Khoutu ea Phoso	Tlhaloso	Boemo ba Tsamaiso	Tharollo
SF tse benyang ka ho fapanyetsana ka OP	Sensor e bulehileng ea mocheso kapa mohala oa sensor	Mesebetsi ea tlhahiso ho latela mokhoa o khethiloeng oa sensor failure (SF)	Sheba Mokhoa oa ho rarolla mathata. Matla a ho potoloha ho hlophisa taolo bocha.
SF tse benyang ka ho fapanyetsana ka SH	Sensor e khutsufalitsoeng ea mocheso kapa mohala oa kutlo	Mesebetsi ea tlhahiso ho latela mokhoa o khethiloeng oa sensor failure (SF)	Sheba Mokhoa oa ho rarolla mathata. Matla a ho potoloha ho hlophisa taolo bocha.
EE	Ho hloleha ha lenaneo	Output e timme	Seta botjha taolo ka ho tobetsa konopo ya MENU konopo. Haeba mathata a ntse a tsoela pele, fetola taolo.

Fetola Sebaka sa Mocheso:

1. Khetha MENU ho fihlela LCD e hlaha.
2.  Khetha MENU ho fihlela LCD joale e bontša mocheso oa OFF setpoint.
3.  Khetha KAPA ho fetola boleng (mocheso o OFF ke mocheso o lakatsehang oa phaposi).
4. Ha boleng bo lakatsehang bo fihlile, khetha MENU ho boloka boleng. (indent) LCD joale e tla bonts'a ON.
5. Khetha MENU 'me LCD e tla hlahisa mocheso oa ON setpoint.
6.  Kgetha KAPA ho fetola boleng ebe o kgetha MENU ho boloka.
7.  Kamora metsotsoana e 30, molaoli o tla kheloha ho khutlela skrineng sa lapeng ebe o bonts'a mocheso oa kamore.

Hlokomela: Ha boemo bo botala ba LED bo bonesitsoe, thermostat e batla ho pholisa (letšoao la lehloa le tla hlaha).

EXAMPLE: Ho boloka mocheso oa kamore e le 5° F, beha OFF ho ​​4° F 'me u behe ON ho 5° F.

Defrost Control Litaelo

(F0) Diyuniti

Tlhaloso ea Lebala
Mehala e 'meli e nolofalitsoeng e laola ho qaleha ha sehatsetsi le nako. Mohala o ka ntle o potoloha hang ka mor'a lihora tse 24 ho theha qaleho ea potoloho. E lekantsoe ka lihora tse 1 ho isa ho tse 24 'me e amohela lithakhisa tsa nako tse kentsoeng ho fapana le linako tse lakatsehang tsa ho qala potoloho. Ho fihla ho li-cycles tse tšeletseng tsa defrost li fumaneha ka nako ea lihora tse 24. Mohala o ka hare o laola nako ea potoloho e 'ngoe le e' ngoe ea defrost mme o potoloha hang ka lihora tse 2. E lekantsoe ka li-increments tsa metsotso e 2 ho isa ho metsotso e 110 'me e na le pointer ea letsoho e bonts'ang bolelele ba potoloho ka metsotso. Nako ena e boetse e na le solenoid e kentsoeng ke thermostat kapa switch ea khatello ho emisa ho putlama.

Ho Seta Nako

1. Screw timer pins ha u daela kantle ka nako eo u batlang ho qala ka eona.
2.  Tobetsa ho pointer ea boronse ha u daela ka hare 'me u e thellele ho bontša bolelele ba potoloho ka metsotso.
3. Fetola nako ea ho seta konopo ho fihlela nako ea letsatsi e supa.
4.  Nomoro e daelang e tsamaellanang le nako ea sebele ea letsatsi ka nako eo.

(F1) Diyuniti
The defrost ea motlakase e qalisoa ke ABB multifunction timer (sheba setšoantšo bakeng sa litlhophiso tsa feme). The defrost cycle e lumella khoele hore e tlose serame sohle pele e khutlela ho pholileng. Haeba sena se sa etsahale, li-setting tsa nako li ka 'na tsa hloka ho lokisoa. Ho fetola litlhophiso, sheba karolo e ka tlase ho TIMERS. Linako tsa ho pholisa le linako tsa defrost li setiloe esale pele empa li ka hloka ho lokisoa ho latela maemo a ikhethileng a mosebetsi.

• Linako tse peli tse ka letsohong le letšehali li fana ka tieho lipakeng tsa VFD le khetho ea fan e qalang.
  Bohlokoa: Se ke oa fetola li-setting tsa li-timers tse ka ho le letšehali ho qoba kotsi ho VFD kapa ho qala ha bonolo.
• Sebali sa nako sa boraro ho tloha ka ho le letšehali se laola bolelele ba nako ea ho sebetsa ea potoloho ea ho pholisa.
• Sebali se hole-hole se laola bolelele ba nako ea ho sebetsa ha defrost cycle.

EXAMPLE: Fetola potoloho ea ho pholisa ho tloha metsotso e 50 ho ea ho lihora tse 10 ka potoloho ea metsotso e 30 ea defrost. Sena se tla fihlela linako tse ka bang peli tsa ho qhibiliha ha metsi ka metsotso e 30 nakong ea lihora tse 24.

1. Ka nako ea boraro ho tloha ka letsohong le letšehali fetola khetho ea Nako ho ea ho 10h le boleng ba Nako ho ea ho 10 (e beha potoloho ea ho pholisa ho lihora tse 10).
2. Ka nako ea bone ho tloha ka letsohong le letšehali fetola boleng ba Nako ho 3 (e beha potoloho ea defrost ho metsotso e 30).

Bakeng sa tlhaloso e qaqileng haholoanyane ea mesebetsi ea nako, bona buka ea timer e teng ka har'a phanele ea taolo. Sheba ka tlase bakeng sa litlhophiso tse tloaelehileng tsa Lead / Latela mokhoa oa nako bakeng sa potoloho e pholileng ea metsotso e 50 le potoloho ea metsotso e 20 ea defrost.

Trane - ka Trane Technologies (NYSE: TT), moqapi oa lefats'e - e theha tikoloho e ntle, e baballang matla ka tlung bakeng sa lits'ebetso tsa khoebo le tsa bolulo. Ho fumana lintlha tse ling, ka kopo etela trane.com or hanehane.com. Trane e na le leano la ntlafatso ea lintlha tsa sehlahisoa le sehlahisoa mme e na le tokelo ea ho fetola moralo le litlhaloso ntle le tsebiso. Re ikemiselitse ho sebelisa mekhoa ea khatiso e hlokolosi ka tikoloho.

TEMP-SVN012A-EN 26 Apr 2025 Supersedes CHS-SVN012-EN (March 2024)

Copyright
Tokomane ena le lintlha tse ho eona ke thepa ea Trane, 'me e se ke ea sebelisoa kapa ea hlahisoa bocha kaofela kapa karolo ea eona ntle le tumello e ngotsoeng. Trane e na le tokelo ea ho ntlafatsa khatiso ena ka nako efe kapa efe, le ho etsa liphetoho ho litaba tsa eona ntle le tlamo ea ho tsebisa motho ofe kapa ofe ka tokiso kapa phetoho e joalo.

Matšoao a khoebo
Matshwao ohle a kgwebo a hlahang tokomaneng ena ke matshwao a beng ba ona.

LBH

• P: Ke mang ea lokelang ho kenya le ho fana ka litšebeletso tsa Lekala la Tšebeliso ea Moea oa Trane Rental?
  K: Ke basebetsi ba nang le litsebo ba nang le tsebo le koetliso e khethehileng feela ba lokelang ho sebetsana le ho kenya le ho sebeletsa thepa ena ho thibela likotsi.
• P: Ke mehato efe ea ho itšireletsa e lokelang ho nkoa ha ho sebetsa thepa?
  K: Ka linako tsohle ela hloko litemoso tsa polokeho, apara PPE e nepahetseng, etsa bonnete ba hore ho na le likhoele tse nepahetseng le ho thea fatše, 'me u latele melaoana ea EHS ho qoba likotsi.

Litokomane / Lisebelisoa

Sehlopha sa TRANE TEMP-SVN012A-EN Low Temp Air Handling Unit [pdf] Tlhophiso Tataiso TEMP-SVN012A-EN, TEMP-SVN012A-EN Setsi sa Maoto a Moeeng a Tlase, TEMP-SVN012A-EN, Yuniti ya Matshwaro a Moya o Tlase, Yuniti ya Matshwaro a Moya, Yuniti ya Tshebetso ya Moya, Yuniti ya Tshebetso.

Litšupiso

• Bukana ea Mosebelisi