DAUDIN iO-GRIDm Relay Output Module User Manual
Relay Output Module List
| Chigadzirwa Kwete. | Tsanangudzo | Mashoko |
| GFAR-RM11 | 8-Channel relay module, yakadzikwa | |
| GFAR-RM21 | 4-Channel relay module, yakadzikwa |
Product Description
Iyo GFAR relay module nhevedzano yakagadzirirwa yakanangana nemaindasitiri ekushandisa. Iyo ine 4-channel uye 8-chiteshi modhi, ese ari maviri anogona kudzora AC / DC mutoro kuburikidza nekutaurirana
Yambiro (CHENJERERO):
- CHIDZIDZO ichi NDECHEKUSHANDISA CHEMUMBA CHETE, USACHISIKA KANA KUCHISHANDISA PATEMIRIRO YAKAKAKARIRA UYE PAMUNYORO WEMHANGA.
- DVISA KUdonha UYE KUBOMERA ZVIMWE ZVINO ZVINHU ZVIMWE EMAGETI ZVICHAKURWA.
- USAEDZA KUBVARURA KANA KUVHURA KAVHA PASI PANE MATINJI API KUTI UDZIVIRIRE NJODZI.
- KANA CHOKWADI CHICHISHANDISWA NEMUNHU USINA KUTAURWA NEMUgadziri, KUDZIVIRIRWA KUNOPIWA NEZVINHU ZVINOGONA KUKATADZWA.
- KUGADZIRIRA KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI KUTI CHETE CHETE SYSTEM INOPIMISA ZVINHU ZVINHU IBASA REMUUNGANIDZI WESYSTEM.
- SHANDISA NEMHURI CHETE. INPUT WIRING: ZVINONYANYA 28 AWG, 85°C, KUBUDA WIRINGI: ZVINONYANYA 28 AWG, 85°C
- KUSHANDISWA MUMUNHU WAKATORWA. TARIRA KUBHUKU ROKUPEDZISIRA ZVINHU.
- Bvisa ZVINHU ZVINHU ZVINHU ZVINOITWA USATI WASHANDISA.
- KUPIRIRA KWAKAKODZERA KUNODIWA KUTI KUDUKURE NGOZI YEKUVAKA NJODZI KANA KUBVUKA GASI IRI PAKATI PAKUCHAJA MUNDAKA. ONA VARIMI BHUKU.
Relay Output Module Specification
GFAR-RM11
| Kutsanangurwa Kwehunyanzvi | |
| Nhamba Yezvinobuda | 8 |
| Voltage Kuwedzera | 24 VDC / 5 VDC |
| Ikozvino Kushandiswa | <200 mA pa24 VDC” |
| Max Kubuda Voltage | 250 VAC / 30 VDC |
| Max Output Razvino | 10 A |
| Actuation Nguva | 10 ms yakakura |
| Reoperate Nguva | 5 ms yakakura |
| Nhaurirano Yakananga | |
| Fieldbus Protocol | Modbus RTU |
| Format | N, 8, 1 |
| Baud Rate Range | 1200-1.5 Mbps |
| General Specification | |
| Dimension (W*D*H) | 134 x 121 x 60.5mm |
| Kurema | 358g |
| Ambient tembiricha (kushanda) | -10…+60 ˚C |
| Storage Temp. | -25 ˚C…+85 ˚C |
| Humidity Inobvumidzwa (isina-condensing) | RH 95%, isina-condensing |
| Kureba Limit | < 2000 m |
| Ingress Dziviriro (IP) | IP20 |
| Kusvibisa Kuoma | II |
| Kuchengetedzwa Kubvumidzwa | CE |
| Wiring Range (IEC / UL) | 0.2 mm2 ~ 2.5 mm2 / AWG 24~12 |
| Wiring Ferrules | DN00508D,DN00708D,DN01008D,DN01510D |
GFAR-RM21
| Kutsanangurwa Kwehunyanzvi | |
| Nhamba Yezvinobuda | 4 |
| Voltage Kuwedzera | 24 VDC |
| Ikozvino Kushandiswa | <109 mA pa24 VDC” |
| Max Kubuda Voltage | 250 VAC / 30 VDC |
| Max Output Razvino | 10A |
| Actuation Nguva | 10 ms yakakura |
| Reoperate Nguva | 5 ms yakakura |
| Nhaurirano Yakananga | |
| Fieldbus Protocol | Modbus RTU |
| Format | N, 8, 1 |
| Baud Rate Range | 1200-1.5 Mbps |
| General Specification | |
| Dimension (W*D*H) | 68 x 121.8 x 60.5mm |
| Kurema | 195g |
| Ambient tembiricha (kushanda) | -10…+60 ˚C |
| Storage Temp. | -25 ˚C…+85 ˚C |
| Humidity Inobvumidzwa (isina-condensing) | RH 95%, isina-condensing |
| Kureba Limit | < 2000 m |
| Ingress Dziviriro (IP) | IP20 |
| Kusvibisa Kuoma | II |
| Kuchengetedzwa Kubvumidzwa | CE |
| Wiring Range (IEC / UL) | 0.2 mm2 ~ 2.5 mm2 / AWG 24~12 |
| Wiring Ferrules | DN00508D,DN00708D,DN01008D,DN01510D |
Relay Output Module Ruzivo
Relay Output Module Dimension
- GFAR-RM11
- GFAR-RM21
Relay Output Module Panel Ruzivo
- GFAR-RM11
Terminal block labeling 1 2 3 4 5 7 Port tsanangudzo 24V 0V 5V 0V RS485A RS485B Terminal block B port tsanangudzo:
Terminal block labeling 0 A 0B 1 A 1B 2 A 2B Port tsanangudzo NO 1 NC 1 NO 2 NC 2 NO 3 NC 3 Terminal block labeling 3A 3B COM1 COM1 Port tsanangudzo NO 4 NC 4 Commonport Commonport Terminal block C port tsananguro:
Terminal block labeling COM2 COM2 4A 4B 5A 5B Port tsanangudzo Commonport Commonport NO 5 NC 5 NO 6 NC 6 Terminal block labeling 6A 6B 7A 7B Port tsanangudzo NO 7 NC 7 NO 8 NC 8 - GFAR-RM21
Terminal block A port tsanangudzo:
| Terminal block labeling | 1 | 2 | 3 | 4 | 5 | 7 |
| Port tsanangudzo | 24V | 0V | 5V | 0V | RS485A | RS485B |
Terminal block B port tsanangudzo:
| Terminal block labeling | 0A | 0B | 1A | 1B | 2A | 2B |
| Port tsanangudzo | NO 1 | NC 1 | NO 2 | NC 2 | NO 3 | NC 3 |
| Terminal block labeling | 3A | 3B | COM | COM | ||
| Connector tsananguro | NO 4 | NC 4 | Common port |
Common port |
Module Installation/Disassembly
Installation
- Nekumberi kweiyo relay inobuda module yakatarisana newe, dzvanya module pasi nemasaini ekupinza zviteshi kudivi rekumusoro reDIN njanji.
- Dzvanya iyo module pasi uye epurasitiki clamp ichatsvedza. Ramba uchisundira pasi kusvika plastiki clamp "kudzvanya".
Kubviswa
- Shandisa screwdriver kudhonza epurasitiki clamp padivi uye bvisa iyo module kubva kuDIN njanji.
- Bvisa iyo relay inobuda module kubva kuDIN njanji mune reverse order yekuisa.
iO-GRID M Series Nhanganyaya
iO-GRID M yakatevedzana inoshandisa yakajairwa Modbus kutaurirana protocol uye inotsigira Modbus RTU/ASCII uye Modbus TCP. Ndokumbira usarudze zvigadzirwa uye fekitori controllers kuti uone system yako zvichibva pane yako yekutaurirana protocol.
iO-GRID M Zvikamu
DINKLE Bhazi
Njanji 1 kusvika 4 inotsanangurwa kune magetsi uye njanji 5 kusvika 7 inotsanangurwa yekutaurirana.
DINKLE Bhazi Rail Tsanangudzo:
| Rail | Tsanangudzo | Rail | Tsanangudzo |
| 8 | — | 4 | 0V |
| 7 | RS485B | 3 | 5V |
| 6 | — | 2 | 0V |
| 5 | RS485A | 1 | 24V |
Gateway Module
A gedhi module inoshandura pakati peModbus TCP uye Modbus RTU/ASCII. Iyo module inopa maviri seti ekunze Ethernet ports kuti abatanidze kune controller uye Internet
Kune marudzi maviri emagedhi modules aripo:
4-channel gateway module: Inopa 4 RS485 zviteshi kuti zvibatanidze kune control module Single-channel gateway module: Hapana kunze kwekubatana kweRS485 ports. Zviratidzo zveRS485 zvinoparidzirwa kuburikidza neDINKLE Bus uye I / O module.
Gateway module zvigadzirwa ruzivo:
| Chigadzirwa Kwete. | Tsanangudzo |
| GFGW-RM01N | Modbus TCP-to-Modbus RTU / ASCII gedhi module. 4 Zviteshi |
| GFGW-RM02N | Modbus TCP-to-Modbus RTU / ASCII gedhi module. 1 Port |
Kudzora module
Iyo control module inobata I / O module uye inomisa iyo gadziriso. Inopa ekunze RS485 ports yekubatanidza kune controller.
Kune marudzi maviri ekudzora modules aripo:
3-chiteshi chekudzora module:
Inopa matatu ekunze RS3 madoko, akakodzera zviteshi ane 485 kana anopfuura ekudzora mamodule. Pakati peiyo RS2 ports, 485 yacho ichave yakabatana kune controller uye control module yechiteshi chinotevera.
Imwe-chiteshi chekudzora module:
Inopa imwe chete RS485 port yekubatanidza kune controller, yakakodzera kune imwe-module zviteshi.
Dzora ruzivo rwezvigadzirwa zvemodule:
| Chigadzirwa Kwete. | Tsanangudzo |
| GFMS-RM01N | RS485 control module, Modbus RTU/ASCII 3 Ports |
| GFMS-RM01S | RS485 control module, Modbus RTU/ASCII 1 Port |
I/O Module
Dinkle inopa marudzi akasiyana eI/O modules ane mabasa akasiyana:
| Chigadzirwa Kwete. | Tsanangudzo |
| GFDI-RM01N | 16-chiteshi dhijitari yekupinda module (mabviro/kunyura) |
| GFDO-RM01N | 16-chiteshi dhijitari yekubuda module (kunyura) |
| GFDO-RM02N | 16-chiteshi dhijitari yekubuda module (Mabviro) |
| GFAR-RM11 | 8-Channel relay module, yakadzikwa |
| GFAR-RM21 | 4-Channel relay module, yakadzikwa |
| GFAI-RM10 | 4-chiteshi analog yekupinda module (± 10VDC) |
| GFAI-RM11 | 4-chiteshi analogi yekupinda module (0…10VDC) |
| GFAI-RM20 | 4-chiteshi analog yekupinda module (0… 20mA) |
| GFAI-RM21 | 4-chiteshi analog yekupinda module (4… 20mA) |
| GFAO-RM10 | 4-chiteshi analog yekubuda module (± 10VDC) |
| GFAO-RM11 | 4-chiteshi analog yekubuda module (0…10VDC) |
| GFAO-RM20 | 4-chiteshi analog yekubuda module (0… 20mA) |
| GFAO-RM21 | 4-chiteshi analog yekubuda module (4… 20mA) |
I/O Module Parameter Zvirongwa uye Nhanganyaya
I/O Module Zvirongwa uye Zvisungo
I/O Module System Configuration List
| Zita/Chigadzirwa Nha. | Tsanangudzo |
| GFDO-RM01N | 16-chiteshi dhijitari yekubuda module (kunyura) |
| GFDO-RM02N | 16-chiteshi dhijitari yekubuda module (Mabviro) |
| GFTK-RM01 | USB-kusvika-RS232 converter |
| Micro USB tambo | Inofanirwa kunge iine data yekufambisa basa |
| Computer | BSB-inoenderana |
Module Initial Setting List
| Chigadzirwa Kwete. | Tsanangudzo | ChiteshiAihwa. | Baudrate | Format |
| GFMS-RM01N | RS485 control module, RTU/ASCII | 1 | 115200 | RTU(8,N,1) |
| GFDI-RM01N | 16-chiteshi dhijitari yekupinda module (mabviro/kunyura) | 1 | 115200 | RTU(8,N,1) |
| GFDO-RM01N | 16-chiteshi dhijitari yekubuda module (kunyura) | 1 | 115200 | RTU(8,N,1) |
| GFDO-RM02N | 16-chiteshi dhijitari yekubuda module (Mabviro) | 1 | 115200 | RTU(8,N,1) |
| GFAR-RM11 | 8-Channel relay module, yakadzikwa | 1 | 115200 | RTU(8,N,1) |
| GFAR-RM21 | 4-Channel relay module, yakadzikwa | 1 | 115200 | RTU(8,N,1) |
| GFAI-RM10 | 4-chiteshi analog yekupinda module (± 10VDC) | 1 | 115200 | RTU(8,N,1) |
| GFAI-RM11 | 4-chiteshi analogi yekupinda module (0…10VDC) | 1 | 115200 | RTU(8,N,1) |
| GFAI-RM20 | 4-chiteshi analog yekupinda module (0… 20mA) | 1 | 115200 | RTU(8,N,1) |
| GFAI-RM21 | 4-chiteshi analog yekupinda module (4… 20mA) | 1 | 115200 | RTU(8,N,1) |
| GFAO-RM10 | 4-chiteshi analog yekubuda module (± 10VDC) | 1 | 115200 | RTU(8,N,1) |
| GFAO-RM11 | 4-chiteshi analog yekubuda module (0…10VDC) | 1 | 115200 | RTU(8,N,1) |
| GFAO-RM20 | 4-chiteshi analog yekubuda module (0… 20mA) | 1 | 115200 | RTU(8,N,1) |
| GFAO-RM21 | 4-chiteshi analog yekubuda module (4… 20mA) | 1 | 115200 | RTU(8,N,1) |
Setup Software Mabasa:
Iyo yekuseta software inoratidza iyo I / O module chiteshi nhamba, baud mareti uye data mafomati.
I/O Module Zvirongwa uye Zvisungo
Batanidza Micro USB port uye GFTL-RM01 (RS232 converter) pakombuta yako uye vhura iyo iO-Grid M Utility chirongwa kumisikidza I/O module parameter.
I/O module yekubatanidza mufananidzo:
I/O module yekubatanidza mufananidzo:
i-Designer Chirongwa Tutorial
- Batanidza kune I/O module uchishandisa GFTL-RM01 uye Micro USB tambo
- Dzvanya kuti utange software
- Sarudza "M Series Module Configuration"
- Dzvanya pane "Setting Module" icon
- Pinda iyo "Setting Module" peji yeM-yakatevedzana
- Sarudza mhando yemodhi zvichienderana neiyo yakabatana module
- Dzvanya pakanzi "Connect"
- Gadzira nhamba dzechiteshi cheI / O modules uye fomati yekukurukurirana (inofanirwa kudzvanya pa "Chengetedza" mushure mekuvashandura)
Relay Output Module Control Register Tsananguro
Relay Output Module Register Kukurukurirana Nzira
Shandisa Modbus RTU/ASCII kunyora mune imwe-chip relay inobuda module marejista Kero yerelay inobuda module rejista ichanyorwa ndeiyi: 0x2000
※Isina control module, waya yeRS485 yemuviri inofanirwa kubatanidzwa neadapter kutumira chiratidzo kune simba uye relay inobuda module.
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| Adapter BS-211 | 24V | 0V | 5V | 0V | 485A | ─ | 485B | ─ |
| Terminal block 0181-A106 | 24V | 0V | 5VDC | 0V | 485A | 485B |
Shandisa Modbus RTU/ASCII ine control modules kunyora mune relay inobuda marejista
Kana imwe relay inobuda module yaiswa ine control module, inozongopa iyo relay kubuda
modules 'output rekodhi rekodhi kune kero ye0x2000
Example:
Mareji maviri erelay anobuda module achange ari pakati pe0x2000 ne0x2001
※Paunenge uchishandisa control modules, RS485 inogona kubatana kudzora mamodule neBS-210 uye BS-211
Iyo gadziriso inoshandisa Modbus RTU/ASCII ine control module yekunyora mune relay inobuda modules yakanyorwa pazasi:
| Zita/Chigadzirwa Nha. | Tsanangudzo |
| GFMS-RM01S | Master Modbus RTU, 1 Port |
| GFAR-RM11 | 8-Channel relay module, yakadzikwa |
| GFAR-RM21 | 4-Channel relay module, yakadzikwa |
| 0170-0101 | RS485(2W)-ku-RS485(RJ45 interface) |
Relay Output Module Register Format Ruzivo (0x2000, inonyorwazve)
GFAR-RM11 Register Format: Channel yakavhurika-1; chiteshi chakavharwa - 0; mutengo wakachengetedzwa - 0.
| Bit15 | Bit14 | Bit13 | Bit12 | Bit11 | Bit10 | Bit9 | Bit8 | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 |
| Reserved | 8A | 7A | 6A | 5A | 4A | 3A | 2A | 1A | |||||||
Example: Iine chiteshi 1 kusvika 8 yakavhurika: 0000 0000 1111 1111 (0x00 0xFF); nezvose
nzira dzakavharwa: 0000 0000 0000 0000 (0x00 0x00).
GFAR-RM11 Register Format: Channel yakavhurika-1; chiteshi chakavharwa - 0; mutengo wakachengetedzwa - 0.
| Bit15 | Bit14 | Bit13 | Bit12 | Bit11 | Bit10 | Bit9 | Bit8 | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 |
| Reserved | 4A | 3A | 2A | 1A | |||||||||||
Example: Iine chiteshi 1 kusvika 4 yakavhurika: 0000 0000 0000 1111 (0x00 0x0F); nezvose
nzira dzakavharwa: 0000 0000 0000 0000 (0x00 0x00).
GFAR-RM20 Register Format: Channel yakavhurika-1; chiteshi chakavharwa - 0; mutengo wakachengetedzwa - 0.
Modbus basa kodhi 0x10 Kuratidzira
Shandisa Modbus RTU/ASCII kunyora mune imwe-chip relay inobuda module marejista
| Modbus basa kodhi | Kodhi yakatumirwa example(ID:0x01) | Code akapindura example(ID:0x01) |
| 0x10 | 01 10 20 00 00 01 02 00 FF | 01 01 10 20 00 00 |
※ Mumuenzaniso uyuampuye, tiri kunyora mu "0x2000" neI / O module ID ye "01" ※ Kana usingashandisi mamodule ekutaurirana, marejista achange ari pa0x2000.
Shandisa Modbus RTU / ASCII ine control modules kunyora mune relay inobuda rejista
| Modbus basa kodhi | Kodhi yakatumirwa sample(ID:0x01) | Kodhi akapindura sample(ID:0x01) |
| 0x10 | 01 10 20 00 00 01 02 00 FF | 01 01 10 20 00 00 |
※ Mumuenzaniso uyuampuye, tiri kunyora mu "0x2000" ine control module ID ye "01"
※Paunenge uchishandisa mamodule ekutaurirana, marejista anotanga pa0x2000
Zvinyorwa / Zvishandiso
 |
DAUDIN iO-GRIDm Relay Output Module [pdf] User Manual GFAR-RM11, GFAR-RM21, iO-GRIDm, iO-GRIDm Relay Output Module, Relay Output Module, Output Module |
