DAUDIN iO-GRIDm Relay Output Module User Manual
Relay Output Module List
| Khoom No. | Kev piav qhia | Lus hais |
| GFAR-RM11 | 8-Channel relay module, hauv av | |
| GFAR-RM21 | 4-Channel relay module, hauv av |
Product Description
GFAR relay module series yog tsim tshwj xeeb rau kev siv tshuab. Nws muaj 4-channel thiab 8-channel qauv, ob leeg tuaj yeem tswj AC / DC load los ntawm kev sib txuas lus
CEEB TOOM:
- Cov khoom siv no yog siv rau sab hauv tsev nkaus xwb, tsis txhob muab los yog siv nyob rau hauv qhov kub thiab txias ib puag ncig.
- Tsis txhob poob thiab thab lwm tus, cov khoom siv hluav taws xob yuav raug puas tsuaj.
- Tsis txhob sim txiav tawm lossis qhib lub npog hauv txhua qhov xwm txheej kom tsis txhob muaj kev phom sij.
- Yog tias cov cuab yeej siv los ntawm tus yam ntxwv tsis tau teev tseg los ntawm lub chaw tsim khoom, kev tiv thaiv muab los ntawm cov khoom siv yuav raug cuam tshuam.
- LUB INSTALLATION NTAWM TXOJ CAI TXOJ CAI NTAWM LUB SYSTEM INcorporating cov khoom yog lub luag hauj lwm ntawm lub koom haum ntawm lub SYSTEM.
- Siv nrog cov neeg siv tooj liab nkaus xwb. INput WIRING: Yam tsawg kawg 28 AWG, 85 ° C, OUTPUT TXOJ CAI: 28 AWG, 85 ° C
- SIV IB TUG TSEV KAWM NTAWV. Xa mus rau phau ntawv ENVIRONMENTAL CONDITIONS.
- DISCONNECT txhua qhov chaw ntawm kev muab khoom ua ntej muab kev pabcuam.
- YUAV TSUM TAU TXAIS KEV PAB CUAM TSHUAJ TIV THAIV KEV PAB CUAM TSHAJ PLAWS LOS NTAWM LUB CHAW UA HAUJ LWM HAUV LUB CHAW UA HAUJ LWM. XOV XWM HAIV NEEG.
Relay Output Module Specification
GFAR-RM11
| Technical Specification | |
| Number of Outputs | 8 |
| Voltage Khoom siv | 24VDC / 5VDC |
| Kev siv tam sim no | <200 mA ntawm 24 VDC” |
| Max Tso Tawm Voltage | 250VAC / 30VDC |
| Tso Tawm Me Nyuam Tam Sim No | 10 A |
| Lub Sijhawm Ua Haujlwm | 10ms mas |
| Rov ua dua Sijhawm | 5ms mas |
| Kev sib txuas lus Specification | |
| Fieldbus raws tu qauv | Modbus RTU |
| Hom ntawv | N, 8, 1 |
| Baud Rate Range | 1200-1.5 Mbps |
| General Specification | |
| Qhov Loj (W * D * H) | 134 x 121 x 60.5 mm |
| Qhov hnyav | 358 g |
| Ambient kub (kev ua haujlwm) | -10… + 60 ˚C |
| Cia Temp. | -25 ˚C… + 85 ˚C |
| Permissible Humidity (tsis-condensing) | RH 95%, tsis-condensing |
| Siab Tshaj Plaws Li | <2000 m |
| Kev tiv thaiv Ingress (IP) | IP 20 |
| Pua paug hnyav | II |
| Kev Pom Zoo Ntawm Kev Nyab Xeeb | CE |
| Cov kab hluav taws xob (IEC / UL) | 0.2mm2 ~ 2.5mm2 / AWG 24 ~ 12 |
| Txuas Ferrules | DN00508D, DN00708D, DN01008D, DN01510D |
GFAR-RM21
| Technical Specification | |
| Number of Outputs | 4 |
| Voltage Khoom siv | 24 VDC |
| Kev siv tam sim no | <109 mA ntawm 24 VDC” |
| Max Tso Tawm Voltage | 250VAC / 30VDC |
| Tso Tawm Me Nyuam Tam Sim No | 10 A |
| Lub Sijhawm Ua Haujlwm | 10ms mas |
| Rov ua dua Sijhawm | 5ms mas |
| Kev sib txuas lus Specification | |
| Fieldbus raws tu qauv | Modbus RTU |
| Hom ntawv | N, 8, 1 |
| Baud Rate Range | 1200-1.5 Mbps |
| General Specification | |
| Qhov Loj (W * D * H) | 68 x 121.8 x 60.5 mm |
| Qhov hnyav | 195 g |
| Ambient kub (kev ua haujlwm) | -10… + 60 ˚C |
| Cia Temp. | -25 ˚C… + 85 ˚C |
| Permissible Humidity (tsis-condensing) | RH 95%, tsis-condensing |
| Siab Tshaj Plaws Li | <2000 m |
| Kev tiv thaiv Ingress (IP) | IP 20 |
| Pua paug hnyav | II |
| Kev Pom Zoo Ntawm Kev Nyab Xeeb | CE |
| Cov kab hluav taws xob (IEC / UL) | 0.2mm2 ~ 2.5mm2 / AWG 24 ~ 12 |
| Txuas Ferrules | DN00508D, DN00708D, DN01008D, DN01510D |
Relay Output Module Cov Lus Qhia
Relay Output Module Dimension
- GFAR-RM11
- GFAR-RM21
Relay Output Module Vaj Huam Sib Luag Cov Lus Qhia
- GFAR-RM11
Terminal thaiv daim ntawv lo 1 2 3 4 5 7 Chaw nres nkoj txhais 24v XNUMX 0V 5V 0V RS 485 A RS485B Terminal Block B chaw nres nkoj txhais:
Terminal thaiv daim ntawv lo 0 A 0B 1 A 1B 2 A 2B Chaw nres nkoj txhais NEEJ 1 NCO 1 NEEJ 2 NCO 2 NEEJ 3 NCO 3 Terminal thaiv daim ntawv lo 3A 3B COM1 COM1 Chaw nres nkoj txhais NEEJ 4 NCO 4 Commonport Commonport Terminal Block C chaw nres nkoj txhais:
Terminal thaiv daim ntawv lo COM2 COM2 4A 4B 5A 5B Chaw nres nkoj txhais Commonport Commonport NEEJ 5 NCO 5 NEEJ 6 NCO 6 Terminal thaiv daim ntawv lo 6A 6B 7A 7B Chaw nres nkoj txhais NEEJ 7 NCO 7 NEEJ 8 NCO 8 - GFAR-RM21
Terminal Block A chaw nres nkoj txhais:
| Terminal thaiv daim ntawv lo | 1 | 2 | 3 | 4 | 5 | 7 |
| Chaw nres nkoj txhais | 24v XNUMX | 0V | 5V | 0V | RS 485 A | RS485B |
Terminal Block B chaw nres nkoj txhais:
| Terminal thaiv daim ntawv lo | 0A | 0B | 1A | 1B | 2A | 2B |
| Chaw nres nkoj txhais | NEEJ 1 | NCO 1 | NEEJ 2 | NCO 2 | NEEJ 3 | NCO 3 |
| Terminal thaiv daim ntawv lo | 3A | 3B | COM | COM | ||
| Connector txhais | NEEJ 4 | NCO 4 | Feem ntau chaw nres nkoj |
Feem ntau chaw nres nkoj |
Module Installation / Disassembly
Kev teeb tsa
- Nrog rau pem hauv ntej ntawm lub relay output module ntsib koj, nias lub module nqes nrog lub teeb liab input ports tiv thaiv sab sauv ntawm DIN rail.
- Nias lub module nqes thiab cov yas clamp yuav swb. Txuas ntxiv mus kom txog thaum cov yas clamp "nias".
Kev tshem tawm
- Siv lub hau ntswj los rub cov yas clamp sideways thiab tshem tawm lub module los ntawm DIN rail.
- Tshem tawm lub relay tso zis module los ntawm DIN rail nyob rau hauv rov qab txiav txim ntawm installation.
iO-GRID M Series Taw Qhia
iO-GRID M series siv tus qauv Modbus kev sib txuas lus raws tu qauv thiab txhawb Modbus RTU/ASCII thiab Modbus TCP. Thov xaiv cov khoom thiab lub Hoobkas tswj los txheeb xyuas koj qhov system raws li koj qhov kev sib txuas lus raws tu qauv.
iO-GRID M Cheebtsam
DINKLE Bus
Rail 1 mus rau 4 yog txhais rau lub hwj chim mov thiab rail 5 mus rau 7 yog txhais rau kev sib txuas lus.
DINKLE Bus Rail txhais lus:
| Rail | Txhais | Rail | Txhais |
| 8 | — | 4 | 0V |
| 7 | RS485B | 3 | 5V |
| 6 | — | 2 | 0V |
| 5 | RS 485 A | 1 | 24v XNUMX |
Rooj vag Module
Lub rooj vag module hloov ntawm Modbus TCP thiab Modbus RTU / ASCII. Lub module muab ob pawg ntawm cov chaw nres nkoj sab nraud Ethernet los txuas rau tus maub los thiab Is Taws Nem
Muaj ob hom rooj vag modules muaj:
4-channel rooj vag module: Muab 4 RS485 chaw nres nkoj txuas mus rau kev tswj module Ib leeg-channel rooj vag module: Tsis muaj kev sib txuas sab nraud rau RS485 cov chaw nres nkoj.Cov RS485 cov teeb liab kis tau los ntawm DINKLE Bus thiab I / O module.
Gateway module khoom cov ntaub ntawv:
| Khoom No. | Kev piav qhia |
| GFGW-RM01N | Modbus TCP-rau-Modbus RTU/ASCII rooj vag module. 4 Chaw nres nkoj |
| GFGW-RM02N | Modbus TCP-rau-Modbus RTU/ASCII rooj vag module. 1 Chaw nres nkoj |
Tswj module
Tus tswj module tswj I / O modules thiab teeb tsa cov kev teeb tsa. Muab RS485 cov chaw nres nkoj sab nraud los txuas rau tus maub los.
Muaj ob hom kev tswj modules muaj:
3-channel tswj module:
Muab 3 sab nraud RS485 chaw nres nkoj, chaw nres tsheb tsim nyog nrog 2 lossis ntau dua tswj modules. Ntawm cov chaw nres nkoj RS485, 2 ntawm lawv yuav txuas nrog tus maub los thiab tswj module ntawm qhov chaw nres tsheb tom ntej.
Ib-channel tswj module:
Muab ib qho chaw nres nkoj RS485 txuas rau tus maub los, haum rau ib qho chaw nres tsheb.
Tswj cov khoom module cov ntaub ntawv:
| Khoom No. | Kev piav qhia |
| GFMS-RM01N | RS485 tswj module, Modbus RTU / ASCII 3 Ports |
| GFMS-RM01S | RS485 tswj module, Modbus RTU / ASCII 1 Chaw nres nkoj |
I/O module
Dinkle muaj ntau hom I / O modules nrog cov haujlwm sib txawv:
| Khoom No. | Kev piav qhia |
| GFDI-RM01N | 16-channel digital input module (qhov chaw / dab dej) |
| GFDO-RM01N | 16-channel digital tso zis module (lub dab dej) |
| GFDO-RM02N | 16-channel digital output module (Qhov chaw) |
| GFAR-RM11 | 8-Channel relay module, hauv av |
| GFAR-RM21 | 4-Channel relay module, hauv av |
| GFAI-RM10 | 4-channel analog input module (± 10VDC) |
| GFAI-RM11 | 4-channel analog input module (0… 10VDC) |
| GFAI-RM20 | 4-channel analog input module (0… 20mA) |
| GFAI-RM21 | 4-channel analog input module (4… 20mA) |
| GFAO-RM10 | 4-channel analog tso zis module (± 10VDC) |
| GFAO-RM11 | 4-channel analog tso zis module (0…10VDC) |
| GFAO-RM20 | 4-channel analog tso zis module (0… 20mA) |
| GFAO-RM21 | 4-channel analog tso zis module (4… 20mA) |
I/O Module Parameter Chaw thiab Taw Qhia
I/O Module Chaw thiab Kev Sib Txuas
I/O Module System Configuration List
| Lub npe / khoom No. | Kev piav qhia |
| GFDO-RM01N | 16-channel digital tso zis module (lub dab dej) |
| GFDO-RM02N | 16-channel digital output module (Qhov chaw) |
| GFTK-RM01 | USB-rau-RS232 converter |
| Micro USB cable | Yuav tsum muaj cov ntaub ntawv hloov chaw ua haujlwm |
| Khoos phis tawj | BSB-compatible |
Module Initial Setting List
| Khoom No. | Kev piav qhia | Chaw nres tshebTsis muaj. | Baudtus nqi | Hom ntawv |
| GFMS-RM01N | RS485 tswj module, RTU / ASCII | 1 | 115200 | RTU(8,N,1) |
| GFDI-RM01N | 16-channel digital input module (qhov chaw / dab dej) | 1 | 115200 | RTU(8,N,1) |
| GFDO-RM01N | 16-channel digital tso zis module (lub dab dej) | 1 | 115200 | RTU(8,N,1) |
| GFDO-RM02N | 16-channel digital output module (Qhov chaw) | 1 | 115200 | RTU(8,N,1) |
| GFAR-RM11 | 8-Channel relay module, hauv av | 1 | 115200 | RTU(8,N,1) |
| GFAR-RM21 | 4-Channel relay module, hauv av | 1 | 115200 | RTU(8,N,1) |
| GFAI-RM10 | 4-channel analog input module (± 10VDC) | 1 | 115200 | RTU(8,N,1) |
| GFAI-RM11 | 4-channel analog input module (0… 10VDC) | 1 | 115200 | RTU(8,N,1) |
| GFAI-RM20 | 4-channel analog input module (0… 20mA) | 1 | 115200 | RTU(8,N,1) |
| GFAI-RM21 | 4-channel analog input module (4… 20mA) | 1 | 115200 | RTU(8,N,1) |
| GFAO-RM10 | 4-channel analog tso zis module (± 10VDC) | 1 | 115200 | RTU(8,N,1) |
| GFAO-RM11 | 4-channel analog tso zis module (0…10VDC) | 1 | 115200 | RTU(8,N,1) |
| GFAO-RM20 | 4-channel analog tso zis module (0… 20mA) | 1 | 115200 | RTU(8,N,1) |
| GFAO-RM21 | 4-channel analog tso zis module (4… 20mA) | 1 | 115200 | RTU(8,N,1) |
Teeb tsa Software Functions:
Lub teeb software qhia txog I/O module chaw nres tsheb tooj, baud tus nqi thiab cov ntaub ntawv tawm tswv yim.
I/O Module Chaw thiab Kev Sib Txuas
Txuas Micro USB chaw nres nkoj thiab GFTL-RM01 (RS232 converter) rau koj lub computer thiab qhib iO-Grid M Utility program los teeb tsa I/O module parameter
I/O module kev sib txuas lus piav qhia:
I/O module txuas duab:
i-Designer Program Tutorial
- Txuas mus rau I/O module siv GFTL-RM01 thiab Micro USB cable
- Nyem rau qhov tso tawm software
- Xaiv "M Series Module Configuration"
- Nyem rau ntawm "Setting Module" icon
- Nkag mus rau nplooj ntawv "Setting Module" rau M-series
- Xaiv hom hom raws li qhov txuas nrog module
- Nyem rau "Connect"
- Teeb tsa I/O modules 'chaw nres tsheb xov tooj thiab hom kev sib txuas lus (yuav tsum nyem rau ntawm "Txuag" tom qab hloov lawv)
Relay Output Module Control Sau npe piav qhia
Relay Output Module Sau npe txoj kev sib txuas lus
Siv Modbus RTU/ASCII los sau rau hauv ib qho-chip relay output module sau npe Qhov chaw nyob rau relay output module sau npe yog: 0x2000
※ Tsis muaj kev tswj hwm module, RS485 lub cev xaim yuav tsum txuas nrog lub adapter xa cov teeb liab mus rau lub zog thiab relay tso zis module
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| Tus Qauv Zauv: BS-211 | 24v XNUMX | 0V | 5V | 0V | 485 A | ─ | 485 XNUMXb | ─ |
| Terminal Thaiv 0181-A106 | 24v XNUMX | 0V | 5 VDC ua | 0V | 485 A | 485 XNUMXb |
Siv Modbus RTU/ASCII nrog tswj modules los sau rau hauv relay tso zis tso npe sau npe
Thaum lub relay tso zis module yog teem nrog ib tug tswj module, nws yuav cia li muab lub relay tso zis
modules 'cov ntaub ntawv tso tawm sau npe ntawm qhov chaw nyob ntawm 0x2000
Example:
Ob lub relay tso zis module sau npe yuav nyob nruab nrab ntawm 0x2000 thiab 0x2001
※ Thaum siv tswj modules, RS485 tuaj yeem txuas rau tswj modules nrog BS-210 thiab BS-211
Cov kev teeb tsa uas siv Modbus RTU / ASCII nrog kev tswj hwm los sau rau hauv cov khoom tso tawm relay yog teev hauv qab no:
| Lub npe / khoom No. | Kev piav qhia |
| GFMS-RM01S | Master Modbus RTU, 1 Chaw nres nkoj |
| GFAR-RM11 | 8-Channel relay module, hauv av |
| GFAR-RM21 | 4-Channel relay module, hauv av |
| 0170-0101 : kuv | RS485 (2W)-rau-RS485 (RJ45 interface) |
Relay Output Module Register Format Information (0x2000, rewritable)
GFAR-RM11 Sau npe hom: Channel qhib-1; channel kaw - 0; reserved tus nqi - 0.
| Bit15 | Bit14 | Bit13 | Bit12 | Bit11 | Bit10 | Bit9 | Bit8 | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 |
| Khaws tseg | 8A | 7A | 6A | 5A | 4A | 3A | 2A | 1A | |||||||
Example: Nrog channel 1 txog 8 qhib: 0000 0000 1111 1111 (0x00 0xFF); nrog tag nrho
cov channel raug kaw: 0000 0000 0000 0000 (0x00 0x00).
GFAR-RM11 Sau npe hom: Channel qhib-1; channel kaw - 0; reserved tus nqi - 0.
| Bit15 | Bit14 | Bit13 | Bit12 | Bit11 | Bit10 | Bit9 | Bit8 | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 |
| Khaws tseg | 4A | 3A | 2A | 1A | |||||||||||
Example: Nrog channel 1 txog 4 qhib: 0000 0000 0000 1111 (0x00 0x0F); nrog tag nrho
cov channel raug kaw: 0000 0000 0000 0000 (0x00 0x00).
GFAR-RM20 Sau npe hom: Channel qhib-1; channel kaw - 0; reserved tus nqi - 0.
Modbus muaj nuj nqi code 0x10 Ua qauv qhia
Siv Modbus RTU/ASCII los sau rau hauv ib-chip relay output module sau npe
| Modbus muaj nuj nqi code | Code xa example(ID:0x01) | Code teb example(ID:0x01) |
| 0 x 10 | 01 10 20 00 00 01 02 00 FF | 01 01 10 20 00 00 ib |
※ Hauv no example, peb tab tom sau rau hauv "0x2000" nrog rau I/O module ID ntawm "01" ※ Thaum tsis siv cov tswj kev sib txuas lus, cov ntawv sau npe yuav nyob ntawm 0x2000
Siv Modbus RTU / ASCII nrog tswj modules los sau rau hauv relay tso zis tso npe sau npe
| Modbus muaj nuj nqi code | Code xa sample(ID:0x01) | Code teb sample(ID:0x01) |
| 0 x 10 | 01 10 20 00 00 01 02 00 FF | 01 01 10 20 00 00 ib |
※ Hauv no example, peb tab tom sau hauv "0x2000" nrog rau kev tswj module ID ntawm "01"
※ Thaum siv cov tswj modules rau kev sib txuas lus, cov ntawv sau npe yuav pib ntawm 0x2000
Cov ntaub ntawv / Cov ntaub ntawv
 |
DAUDIN iO-GRIDm Relay Output Module [ua pdf] Tus neeg siv phau ntawv GFAR-RM11, GFAR-RM21, iO-GRIDm, iO-GRIDm Relay Output Module, Relay Output Module, Output Module |
