Raspberry Pi Pico Servo Tsav Module

Servo Tsav Module Rau Raspberry Pi Pico, 16-Channel Outputs, 16-ntsis Resolution

Nta

• Standard Raspberry Pi Pico header, txhawb nqa Raspberry Pi Pico series boards
• Mus txog 16-Channel servo / PWM tso tawm, 16-ntsis daws teeb meem rau txhua tus channel
• Kev sib xyaw 5V regulator, mus txog 3A tso zis tam sim no, tso cai rau cov roj teeb hluav taws xob los ntawm VIN davhlau ya nyob twg
• Standard servo interface, txhawb kev siv servo xws li SG90, MG90S, MG996R, thiab lwm yam.
• Tshaj tawm cov pins tsis siv ntawm Pico, nthuav dav yooj yim.

Specification

• Kev khiav hauj lwm voltage: 5V (Pico) lossis 6 ~ 12V VIN davhlau ya nyob twg.
• Logic voltagib: 3.3v.
• Servo voltage :5v.
• Tswj interface: GPIO.
• Mounting qhov loj: 3.0mm.
• Loj: 65 × 56mm.

Pinout

Hardware kev twb kev txuas

Txuas lub Rooj Tswjhwm Saib Tsav Tsheb rau Pico, thov saib xyuas cov kev taw qhia raws li USB txhob lo lo ntxhuav npo luam ntawv.

Teeb ib puag ncig

Thov xa mus rau Raspberry Pi phau ntawv qhia: https://www.raspberrypi.org/documentation/pico/tau pib

Raspberry Pi

1. Qhib lub davhlau ya nyob twg ntawm Raspberry Pi
2. Download tau thiab unzip cov demo codes rau phau ntawv Pico C / C ++ SDK

1. Tuav lub pob BOOTSEL ntawm Pico, thiab txuas USB interface ntawm Pico rau Raspberry Pi ces tso lub pob
2. Sau thiab khiav lub pico servo tsav examples.

Python

1. Raspberry Pi cov lus qhia los teeb tsa Micropython firmware rau Pico.
2. Qhib Thonny IDE, hloov kho nws yog tias koj Thonny tsis txhawb Pico.

Nyem File-> Qhib> python/Pico_Servo_Driver_Code/python/servo.py qhib tus example thiab khiav.

Cov ntaub ntawv

• Schematic
• Demo codes

Cov ntaub ntawv / Cov ntaub ntawv

Raspberry Pi Pico Servo Tsav Module [ua pdf] Cov neeg siv phau ntawv qhia Pico Servo Tsav Module, Pico Servo Tsav Module, Tsav Tsheb Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv