I-MFB-Tanzbar Analog Machine Drum

PHELILEVIEW

Siyabonga kithi kwaMFB. Okokuqala sithanda ukukubonga ngokuthenga i-Tanzbär. Sikwazisa kakhulu ukukhetha kwakho futhi sithemba ukuthi uzojabula kakhulu ngensimbi yakho entsha.

Yini i-Tanzbär (“Dancing Bear”)?

I-Tanzbär iyikhompuyutha yesigubhu, equkethe isizukulwane sangempela, somsindo we-analogi kanye nesilandeleli sezinyathelo esiyinkimbinkimbi kakhulu, esisekelwe kwiphethini. Idlala ukujikeleza okuthuthukisiwe kwamayunithi wesigubhu se-MFB i-MFB-522 ne-MFB-503, kanye nezinye izici ezintsha ngokuphelele kumathuluzi e-MFB.

Kwenzekani ngempela ngaphakathi eTanzbär? Lesi yisikhathi esifushaneview yemisebenzi yayo:

Ukukhiqiza umsindo:

• Izinsimbi zezigubhu eziyi-17 ezinamapharamitha angu-8 aphathekayo futhi angabekezeleleka.
• Izimbiza ezisezingeni kuzo zonke izinsimbi zomculo, kanye nevolumu enkulu (ayigcineki).
• Ukuphuma komuntu ngamunye (ngababili ngaphandle kokushaya izandla).
• I-synthesizer elula enepharamitha eyodwa ngayinye yemisindo yokuhola ne-bass.

Umlandeli:

• Amaphethini angu-144 (kumasethi angu-3 resp. 9 amabhange).
• Amathrekhi ayi-14 acupha izinsimbi zesigubhu.
• 2 amathrekhi emicimbi yenothi lokuhlela (okukhiphayo nge-MIDI ne-CV/isango).
• Inhlanganisela yenombolo yesinyathelo (1 kuya ku-32) nokukala (4) ivumela zonke izinhlobo zamasignesha esikhathi.
• Ukuguqula iphethini ye-A/B
• Umsebenzi we-Roll/Flam (ukucupha okuningi)
• Umsebenzi wamaketango (amaphethini okubopha - awagcineki).
• Landelela umsebenzi wokuthulisa

Imisebenzi elandelayo ingahlelwa kuthrekhi ngayinye (insimbi yesigubhu):

• Ubude bethrekhi (1 – 32 izinyathelo)
• Shova ukuqina
• I-track shift (ukubambezeleka okuncane kwayo yonke ithrekhi ngesilawuli se-MIDI)

Imisebenzi elandelayo ingahlelwa esinyathelweni ngasinye (insimbi yesigubhu):

• Nyathela/vala
• Izinga lokuphimisa
• Ukulungiselelwa komsindo kwensimbi yamanje
• Goba (i-pitch modulation - kuphela i-DB1, BD2, SD, toms/congas)
• I-flam (i-multi-trigger = i-flam, i-rolls njll.)
• Ipharamitha yomsindo eyengeziwe (kumathuluzi akhethiwe)

Imisebenzi elandelayo ingahlelwa esinyathelweni ngasinye (amathrekhi e-CV):

• Nyathela/vala (okuphumayo ngenothi lokuvula le-MIDI kanye +/-isango)
• I-pitch enobubanzi obuyi-octave engu-3. Okukhiphayo ngamanothi e-MIDI ne-CV
• Ileveli ye-accent (kungoma ye-bass kuphela)
• I-CV yesibili (kungoma yebhesi kuphela)

Izindlela Zokusebenza

Imodi yokuqalisa ngesandla

• Amathuluzi acupha ngezinkinobho zesinyathelo kanye/noma amanothi e-MIDI (ngesivinini).
• Ukufinyelela kumingcele yomsindo ngamafindo noma isilawuli se-MIDI.

Imodi yokudlala

• Ukukhetha iphethini
• Ukufinyelela kumingcele yomsindo ngamafindo
• Ukufinyelela kumisebenzi yokudlala (iphethini ye-A/B yokuguqula, ukugoqa, ukugcwalisa, nomsebenzi wokuthulisa, nokunye okwengeziwe)

Imodi Yokuqopha

• Ukuhlela iphethini kumodi eyodwa kwezintathu ezitholakalayo (Mathupha, Isinyathelo, noma Imodi ye-Jam)

Ukuvumelanisa

• Iwashi le-MIDI
• Vumelanisa isignali (iwashi) bese uqala/umisa okokufaka noma okukhiphayo; isihlukanisi sewashi eliphumayo

Akukubi, awu? Yebo, bekungenzeki ukubeka ifindo noma inkinobho ezinikele yomsebenzi ngamunye kuphaneli yangaphambili. Kwesinye isikhathi, izinga lomsebenzi wesibili kanye nezinhlanganisela ezithile zezinkinobho kuyadingeka ukuze ufinyelele kuzo zonke izici. Ukuqinisekisa ukuthi wena ne-Tanzbär yakho nizoba abangani maduzane, sikweluleka ukuthi ufunde leli bhukwana ngokucophelela. Lena kuzoba indlela engcono kakhulu nelula yokuhlola i-Tanzbär yakho kahle - futhi kuningi okufanele kuhlolwe. Ngakho siyakuncenga: ngicela uzihluphe ngokufunda (futhi uqonde) le f… manual.

Isixhumi esibonakalayo somsebenzisi

Njengoba kusanda kushiwo, izinkinobho eziningi ze-Tanzbär zihlanganisa umsebenzi ongaphezu kowodwa. Kuye ngemodi ekhethiwe, umsebenzi wezinkinobho ungashintsha. Isibalo esilandelayo sizokukhombisa ukuthi yiziphi izindlela nemisebenzi ehlobene nezinkinobho ezithile.

Sicela uqaphele ukuthi lokhu kumane nje kuphelileview. Ungayisebenzisa ikakhulukazi njengegayidi yokuqondisa. Isethi ephelele yemisebenzi kanye nezinyathelo ezidingekayo zokusebenza kuzochazwa kamuva embhalweni. Sicela uzizwe ukhululekile ukuqhubeka ufunda.

IZIXHUMANO NOKUSEBENZA KWAQALA

Izixhumi zamaphaneli angemuva

Amandla

• Sicela uxhume i-wart ye-12V DC lapha. Nika amandla phezulu/phansi e-Tanzbär usebenzisa inkinobho ethi ON/OFF. Sicela udonse ugesi ophuma odongeni uma ungasayisebenzisi i-Tanzbär. Sicela usebenzise kuphela ugesi ofakiwe noma onezincazelo ezifanayo ncamashi - akukho okuhlukile, sicela!

I-MIDI In1 / MIDI Ku-2 / MIDI Out

• Sicela uxhume amadivayisi we-MIDI lapha. Amakhibhodi e-MIDI namaphedi wezigubhu kufanele axhunywe ku-MIDI Ngo-1. I-MIDI Koku-2 iphatha idatha yewashi le-MIDI ngokukhethekileyo. Ngokuphuma kwe-MIDI, i-Tanzbär idlulisela idethi yenothi yawo wonke amathrekhi.

Ukuphuma komsindo

• I-Tanzbär ifaka umsindo owodwa ophumayo kanye nezinsimbi eziyisithupha ezengeziwe. Laba bakamuva bangojeke be-stereo abakhipha amasignali amathuluzi amabili lilinye - elilodwa esiteshini ngasinye (ngaphandle kwe-Clap - lona umsindo we-stereo). Sicela uhlanganise okuphumayo ngezintambo zokufaka (amakhebuli angu-Y). NgeClap, sicela usebenzise intambo yesitiriyo. Uma uxhuma ikhebula ensimbini ngaphandle, umsindo uyakhanselwa ekuphumeni okukhulu. Sicela uxhume okuyinhloko kwe-Tanzbär kusihlanganisi somsindo, ikhadi lomsindo, noma amp, ngaphambi kokuthi uphakamise i-Tanzbär.
  • BD Ngaphandle kwesobunxele: Bassdrum1, kwesokudla: Bassdrum 2
  • SD/RS Ngaphandle kwesobunxele: Snaredrum, kwesokudla: Rimshot
  • HH/CY Phuma: kwesokunxele: I-Hihat Evuliwe/Ivaliwe, kwesokudla: I-Cymbal
  • I-CP/Clap Out: ama-transient okuhlasela asatshalaliswa kuyo yonke indawo yesitiriyo
  • TO/CO Out: ama-Tom / Congas amathathu asabalale endaweni yesitiriyo
  • CB/CL Out: left: Clave, right: Cowbell

Izixhumi zephaneli ephezulu

Ephaneli eliphezulu le-Tanzbär uzothola isixhumi esibonakalayo se-CV/sango. Ikhipha isilawuli voltage (CV) namasignali esango awo womabili amathrekhi amanothi. Eduze kwalokhu, isignali yokuqalisa/yokumisa kanye nesignali yewashi idluliselwa noma yamukelwe lapha.

• I-CV1: Umphumela we-pitch-CV track 1 (i-lead synthesizer)
• I-CV2: Umphumela we-pitch CV track 2 (i-bass synthesizer)
• I-CV3: Umphumela wokulawula isihlungi se-CV track 3 (i-bass synthesizer)
• Isango1: Okukhipha ithrekhi yesiginali yesango 1 (i-lead synthesizer)
• Isango2: Okukhipha ithrekhi yesiginali yesango 2 (i-bass synthesizer)
• Qala: Ithumela noma yamukela isignali yokuqalisa/yokumisa
• Vumelanisa: Ithumela noma yamukela isignali yewashi

Ukuze uhlole izici eziningi ze-Tanzbär, ngeke udinge lutho ngaphandle koxhumo lwamandla kanye nokuphuma komsindo oyinhloko.

INDLELA YOKUDLALA/MANUAL TRIGGER

Okokuqala ake sihlole amaphethini edemo ukuze sikunikeze umbono walokho iTanzbär engayenza. Ngesikhathi esifanayo sizofunda ukuthi "ukwenziwa kanjani" ku-Tanzbär, okungukuthi, ukudlala amaphethini, ukuwashintsha kanye nokulungisa imisindo. Ukuze udlale futhi ulungise imisindo namaphethini ahlelwe ngaphambilini, sidinga i-PLAY/f0 MANUAL TRIGGER MODE. Ukuze sihlele amaphethini sizongena Kumodi Yokurekhoda esizoyihlola kamuva. Umfanekiso olandelayo ubonisa ukuqedwaview ye-Play Mode nemisebenzi yayo.

Sicela uqaphele ukuthi lokhu kumane nje kuphelileview. Ungayisebenzisa ngokuyinhloko njengendlela yokuqondisa - zonke izinyathelo zokusebenza ezidingekayo zifakwe ngokuningiliziwe embhalweni olandelayo. Ngakho-ke sicela ufunde ngokucophelela.

1. Ukucindezela Isinyathelo/Inkinobho-Instr-Ithulisa Amathrekhi resp. Izinsimbi (i-LED ebomvu = Thulisa).
2. Ukucindezela ngokuphindaphindiwe ama-Acc/Bnd ama-toggles phakathi kwama-Accent-Levels amathathu (i-LED icishiwe/eluhlaza/bomvu). I-Accent ithinta i-Roll-Fnct.
3. Iqala i-Knob-Record-Fnct.:
   • Nika amandla nge-Shift+Step11. Cindezela okuthi Khetha. Umsebenzi uyatholakala uma uthanda. Manje rekhoda ukunyakaza kweknob:
   • Bamba Umsindo + cindezela u-Instr ukuze ukhethe i-Instrument.
   • Cindezela Umsindo ukuze uqale ukurekhoda. I-LED ikhanya ize ifike ku-"1" elandelayo futhi ikhanyise ngokuqhubekayo phakathi nebha elandelayo.
   • Shintsha ama-Soundparameter knobs phakathi nebha eyodwa. (- Gcina Iphethini uma kudingeka)
4. Shintshanisa amasheya Roll-Fnct. Khanyisa cisha. Cindezela i-Instr-Taster ukuze ukhiqize i-Roll. Khetha ukulungiswa:
   • Bamba iRoll/Flam + cindezela Isinyathelo 1-4 (16th, 8th, 4th, 1/2 Note).
5. Ishintsha i-Chaining yephethini ivule/ivale:
   • Bamba uchungechunge + cindezela Izinyathelo (ayikho impendulo ye-LED okwamanje). I-Pattern Chain Ehambelanayo igcinwa okwesikhashana.
   • Cindezela u-Chain ukuze udlale futhi Uchungechunge Lwephethini.
6. Ukuguqula Iphethini ye-A/B:
   • Cindezela okuthi A/B ukuze uguqule Iphethini. Izibonisi zombala we-LED
   • A-Ingxenye impendulo.
   • B- Ingxenye. Nika amandla ukuguqula okuzenzakalelayo nge-Shift+3.
7. Inika amandla Ukukhetha Ukushova
   • Cindezela okuthi Shuffle (wonke ama-Step-LEDs flash).
   • Khetha okuthi Shova-Amandla ngesinyathelo 1-16.
   • Cindezela okuthi Shova ukuze uqinisekise futhi ushiye umsebenzi.
8. Ikhumbula Amanani Agciniwe Epharamitha Ephethini yamanje.

Ukuhlolwa kwemisindo

Ngemva nje kokunika amandla, i-MANUAL TRIGGER MODE ye-Tanzbär iyasebenza. I-LED ”Rec/ManTrig” ihlale ikhanya ngokuluhlaza. Manje usungacupha imisindo ngezinkinobho zesinyathelo/Insimbi. Ungakwazi futhi ukulungisa yonke imisindo ngezilawuli zazo ezizinikezele zepharamitha.

Imodi yokudlala

Imemori Yephethini

Inkumbulo yephethini ye-Tanzbär isebenzisa amasethi amathathu (A, B no-C) amabhange amathathu lilinye. Ibhange ngalinye linamaphethini angu-16 okwenza amaphethini angu-144 esewonke. Isethi A igcwele amaphethini asefekthri. Ibhange 1 no-2 liqukethe amabhithi amahle enziwe i-techno wizard yase-Berlin Yapacc, i-Bank 3 yezemidlalo amaphethini okuqala omshini wezigubhu we-"MFB Kult". Amasethi B no-C alinde indalo yakho emihle. Uma uthanda, okuqukethwe kwe-Setha A kungabhalwa phezu.

Ukukhetha Iphethini

Ukuze ukhethe amaphethini, i-PLAY MODE noma i-MANUAL TRIGGER MODE kufanele isebenze. I-LED Rec/ManTrig kufanele IVALIWE noma ibe LUHLAZA njalo (sicela ubhekisele ku fig.

• Bamba u-Shift + cindezela inkinobho ethi Setha A. Isethi A ikhethiwe.
• Bamba u-Shift + cindezela inkinobho yeBhange. Inkinobho yeBhange ishintsha phakathi kweBhange 1 (eliluhlaza), 2 (elibomvu) kanye no-3 (owolintshi).
• Cindezela inkinobho yesinyathelo. Uma ucindezela Isinyathelo 1, iphethini 1 iyalayishwa njll. Ama-LED Isinyathelo Esibomvu abonisa amaphethini asetshenzisiwe. Iphethini elayishiwe njengamanje ikhanyisa okuwolintshi.

Uma isilandeleli se-sequence sisebenza, ushintsho lwephethini luhlala lwenziwa kubhithi ephansi elandelayo yebha elandelayo.

Ukudlala Iphethini

Qala/misa isilandeleli\

• Cindezela okuthi Dlala. I-sequencer iqala. Cindezela Dlala futhi bese isilandeleli siyama. Lokhu kuphinda kusebenze uma i-Tanzbär ivunyelaniswa newashi le-MIDI.

Sicela uqaphele: Ngemva kokukhanyisa, i-Tanzbär kufanele isethelwe ku-PLAY MODE ukuze udlale amaphethini emuva (cindezela u-Rec/ManTrig, i-LED kufanele IVALIWE). Bese ukhetha iphethini (cindezela Iphethini, inkinobho yesinyathelo, sicela ubone ngenhla).

Lungisa i-Tempo

• Bamba okuthi Shift + hambisa inkinobho Yedatha.

Ukuze ugweme ukweqa i-tempo, ukuguqulwa kwe-tempo kwenziwa ngaso leso sikhathi lapho indawo ye-knob ifana nokusetha kwe-tempo yangaphambilini. Lapho nje ukhulula inkinobho ethi Shift, i-tempo entsha iyagcinwa. Akukho ukufunda i-tempo e-Tanzbär. Amanani ububanzi bekhava yefindo cishe. 60 BPM kuya ku-180 BPM. Kumodi yokudlala (i-Rec/ManTrig LED OFF), awukwazi ukudlala amaphethini akhona kuphela, ungawalungisa "bukhoma" ngezindlela ezimbalwa. Kule modi, izinkinobho ze-Tanzbär zivula imisebenzi ethile ezinikele. Umfanekiso olandelayo ubonisa imisebenzi yazo zonke izinkinobho ezifanele. Embhalweni olandelayo, le misebenzi izochazwa ngokuningiliziwe.

1. Thulisa Umsebenzi
   Ku-PLAY MODE, zonke izinsimbi zingathuliswa kusetshenziswa inkinobho yazo ehambisanayo Isinyathelo/Insimbi (isb. Isinyathelo 3 = BD 1, Isinyathelo 7 = Icymbal njll.). I-LED yensimbi ethulisiwe ikhanya ngokubomvu. Uma iphethini igcinwa, ukuthulisa okusebenzayo nakho kuzogcinwa. Umsebenzi wesitolo umbozwe ekhasini 23.
2. Umsebenzi we-Accent
   Imisa ama-accents kumaleveli amathathu ahlukene. Inkinobho ye-Acc/Bnd ishintsha phakathi kwamaleveli amathathu (i-LED icishiwe/eluhlaza/bomvu). Kumodi yokudlala, izinga le-Accent lithinta umsebenzi we-Roll (bona ngezansi).
3. Shintsha imisindo / umsebenzi wokuqopha i-knob
   Ku-PLAY MODE (i-LED Rec/ManTrig icishiwe) wonke amapharamitha womsindo angahlelwa kusetshenziswa amafindo awo f0 anikezelwe. Ngokushesha nje lapho iphethini ilayishwa kumemori, ipharamitha yamanje u-f0 iyahluka kusilungiselelo samanje seknobhu.
   Uma uthanda, ungarekhoda ukushintshwa kwe-knob ngaphakathi kwebha eyodwa kusilandeleli. Lokhu kwenziwa ngomsebenzi weKnob Record. Inikwe amandla nge-Shift + Isinyathelo 11 futhi ingasetshenziswa KU-PLAY MODE, uma uthanda.

Ukurekhoda ukunyakaza kwama-knob:

• Bamba u-Shift + cindezela u-CP/KnobRec ukuze unike amandla umsebenzi we-Knob Record.
• Cindezela okuthi Dlala ukuze uqale isilandeleli.
• Bamba Umsindo + cindezela inkinobho ye-Instrument ukuze ukhethe insimbi.
• Cindezela Umsindo futhi. I-Sound LED ikhanya kuze kube yilapho kufinyelelwa ukwehla kwebha elandelayo. Bese ikhanyisa njalo phakathi nesikhathi sephethini eyodwa edlala emuva.
• Ngenkathi iphethini isebenza, shintsha ama-knobs weParameter oyifunayo. Ukunyakaza kuqoshwa ngebha eyodwa/iphethini yokudlala futhi.
• Uma kudingeka okunye ukuthatha, vele ucindezele u-Sound futhi bese ulungisa ama-knobs.
• Uma ungathanda ukurekhoda amapharamitha wenye insimbi, sicela ubambe Umsindo
• + cindezela inkinobho Yensimbi ukuze ukhethe insimbi entsha. Bese ucindezela Umsindo ukuze uqale ukurekhoda. Awudingi ukumisa isilandeleli noma nini.

Ukuze ulondoloze ukusebenza kweknobhu yakho unomphela, kufanele ulondoloze iphethini

Awudingi ukubandakanya umsebenzi wokurekhoda we-knob "kuthatha" okusha ngakunye nethuluzi ngokushaya u-Shift + CP/KnobRec. Uma isinikwe amandla, ungayisebenzisa ngokuphindaphindiwe uze ukhubaze umsebenzi. Uma uvula iknobhu ngebha engaphezu kweyodwa ngenkathi “i-knob irekhoda”, okurekhodiwe kwangaphambilini kuzocishwa. Uma ungawuthandi umphumela, mane ulayishe kabusha ukulungiselelwa kwepharamitha, egcinwe kuphethini, ngokushaya okuthi Khetha. Lokhu kusiza njalo uma ungajabule ngokuqoshwa kweknobhu "thatha".

Roll Umsebenzi

I-Play Rolls:

Cha, asikhulumi ngemidlalo-ndima noma uhlobo oluthile lwama-scones lapha, kunalokho mayelana ne-jam... Sicela unike amandla i-PLAY MODE, uma ungakayikhulumi. Cindezela okuthi Roll/Flam ukuze unike amandla umsebenzi we-Roll. Qala isilandeleli njengoba umphumela uzozwakala kuphela uma isilandeleli sisebenza. Uma manje ucindezela inkinobho yesinyathelo/Insimbi, i-instrument ehambisanayo icushwa kaningi. Lo msebenzi waziwa futhi futhi udume ngokuthi ”inothi lokuphinda”. Ukulungiswa kwezibangeli kungasethwa kube amanani amane ahlukene. Zincike ekusethweni Kwesikali (sicela ubheke ikhasi 22). Ukuze ushintshe ukulungiswa, sicela ubambe i-Roll/Flam. Izinkinobho zesinyathelo 1 - 4 ziqala ukuphazima. Cindezela inkinobho eyodwa ye-Isinyathelo ukuze ukhethe ukulungiswa kwe-roll.

Roll Record:

Lolu uhlobo lwesici "sokwengeza" kumsebenzi we-Roll. Uma i-Roll Record inikwe amandla, i-roll iyadlalwa futhi ku-loop ngayinye yephethini entsha, ngisho noma ukhulula inkinobho yesinyathelo/Insimbi. Ngokucindezela u-Shift kanye nenkinobho ye-Instrument ehambisanayo, amaroli azosulwa futhi.
Ukuze unike amandla umsebenzi we-Roll Record:

• Bamba u-Shift + cindezela u-Roll Rec (Isinyathelo 10).
• Cindezela Roll Rec (Isinyathelo 10) futhi. Inkinobho ishintsha phakathi kwe-Roll Record off (i-LED eluhlaza) kanye ne-Roll Record ivuliwe (i-LED ebomvu).
• Cindezela okuthi Khetha ukuze uqinisekise futhi uvale umsebenzi.

Izinyathelo ezirekhodwe ngomsebenzi we-Roll Record zingahlelwa ku-Step Record Mode njenganoma yiziphi ezinye izinyathelo

Umsebenzi we-chain (amaphethini eketango)

Hlanganisa amaphethini angafika kwangu-16 "bukhoma" ngomsebenzi we-Chain:

• Bamba izinkinobho ze-Chain + Step ukuze ukhethe ukulandelana okufunayo kwamaphethini. Sicela uqaphele ukuthi asikho isithenjwa se-LED okwamanje.
• Cindezela u-Chain futhi ukuze unike amandla / ukhubaze umsebenzi we-Chain. I-LED ikhanyisa ngokubomvu uma i-Chain isebenza.

Ukuguqula Iphethini ye-A/B

Cindezela inkinobho ethi A/B ukuze "ushise" ingxenye yesibili yephethini (uma ikhona). I-LED ishintsha umbala wayo. Amaphethini anezinyathelo ezingaphezu kwezingu-16 aqukethe ingxenye engu-B. Ukuze unike amandla ukuguqula okuzenzakalelayo phakathi kwezingxenye zombili, sicela ubambe u-Shift + Isinyathelo 3 (i-AB ivuliwe/ivaliwe).

Shova Umsebenzi

Bamba okuthi Shova + cindezela inkinobho eyodwa yethi Isinyathelo ukuze ukhethe eyodwa kwezingu-16 ezitholakalayo zokuqina. Kumodi yokudlala, ukushova kuthinta zonke izinsimbi ngendlela efanayo.

Khetha Inkinobho

Imisa amanani epharamitha ehleliwe ibuyele kumanani agcinwe ngaphakathi kwephethini yamanje.

Uma usebenzisa imisebenzi 1 kuya ku-8 kuyilapho ukukhetha kwephethini kusebenza (Amalambu e-Pattern LED), umsebenzi ohambisanayo uzokwenziwa ngendlela echazwe ngenhla. Kwezinye izimo, ukukhetha kwephethini izovalwa. Sicela ubheke umfanekiso osekhasini 9. Kwenzeka okufanayo nasekufinyeleleni le misebenzi nge-MANUAL TRIGGER MODE.

INJINI YOMSINDO

Kulesi sahluko, sithanda ukwethula isizukulwane somsindo nemingcele yayo.

Izinsimbi

Yonke imisindo yesigubhu ingahlelwa ngokuqondile kusetshenziswa izilawuli zensimbi ngayinye. Ngaphezu kwalokho, i-Data knob yabelana ngepharamitha eyengeziwe yamathuluzi amaningi. Ingafinyelelwa ngokushesha nje lapho ithuluzi selikhethiwe.

Ipharamitha Efihliwe "Umsindo"

Kumodi Yokurekhoda (futhi Kumodi Yokurekhoda kuphela), ezinye izinsimbi zifaka enye ipharamitha "efihliwe" engafinyelelwa ngenkinobho yomsindo nezinkinobho zesinyathelo. Uma le pharamitha itholakala ensimbini, i-Sound-LED iyabaneka ngemva kokucindezelwa kwe-Rec/ManTrg. Okuningi ngalokhu kamuva esahlukweni esithi Imodi Yokuqopha.

BD 1 Bassdrum 1

• Ukuhlasela Izinga lokuhlasela-okudlulayo
• Ukubola kwevolumu isikhathi sokubola
• Isikhathi se-pitch kanye nokuqina kokuguquguquka kwemvilophu yephimbo
• Shuna i-Pitch
• Izinga Lomsindo womsindo
• Hlunga Umsindo wesignali yomsindo
• Ileveli Yokuhlakazeka Kwedatha
• Umsindo Khetha oku-1 kwezingu-16 ezahlukene zokuhlasela

BD 2 Bassdrum 2

• Ukubola Isikhathi sokubola kwevolumu (kufika kuthoni enganyakazi)
• Shuna i-Pitch
• Ithoni Izinga lokuhlasela-kwesikhashana

I-SD Snaredrum

• Shuna Iphimbo lethoni 1 nethoni 2
• I-D-Tune Detune yethoni 2
• Izinga Lomsindo we-Snappy
• Isikhathi sokubola kwe-S-Decay sesignali yomsindo
• Ithoni Ihlanganisa amasignali ethoni 1 nethoni yesi-2
• Ukubola Isikhathi sokubola kwevolumu yethoni 1 nethoni 2
• Amandla Wokuguqulwa Kwedatha wemvilophu yephimbo

I-RS Rimshot

• I-Data Pitch

CY Cymbal

• Ukubola kwevolumu isikhathi sokubola
• Ithoni Ihlanganisa zombili izimpawu
• Ukuphakama kwedatha / umbala womsindo

OH Vula i-Hihat

• Ukubola kwevolumu isikhathi sokubola
• Iphimbo ledatha / umbala womsindo we-OH no-HH

HH Kuvaliwe Hihat

• Isikhathi sokubola kweVolaume
• Iphimbo ledatha / umbala womsindo we-OH no-HH

I-CL Claves

• Shuna i-Pitch
• Ukubola kwevolumu isikhathi sokubola

CP Ukushaya izandla

• Isikhathi sokubola somsila "wesabizo".
• Hlunga Umbala womsindo
• Ukuhlasela Izinga lokuhlasela-okudlulayo
• Inombolo Yedatha yezidlulile zokuhlasela
• Umsindo 16 ezahlukene attack transients

I-LTC Low Tom / Conga

• Shuna i-Pitch
• Ukubola Isikhathi sokubola kwevolumu (kufika kuthoni enganyakazi)
• Inkinobho yesinyathelo somsindo engu-12 ishintsha phakathi kwe-tom ne-conga. Inkinobho yesinyathelo 13 inika amandla isignali yomsindo.
• Ileveli yomsindo wedatha, kanyekanye kuwo womathathu ama-toms/conga.

I-MTC Mid Tom / Conga

• Shuna i-Pitch
• Ukubola Isikhathi sokubola kwevolumu (kufika kuthoni enganyakazi)
• Inkinobho yesinyathelo somsindo engu-12 ishintsha phakathi kwe-tom ne-conga. Inkinobho yesinyathelo 13 inika amandla isignali yomsindo.
• Ileveli yomsindo wedatha, kanyekanye kuwo womathathu ama-toms/conga

I-HTC High Tom / Conga

• Shuna i-Pitch
• Ukubola Isikhathi sokubola kwevolumu (kufika kuthoni enganyakazi)
• Inkinobho yesinyathelo somsindo engu-12 ishintsha phakathi kwe-tom ne-conga. Inkinobho yesinyathelo 13 inika amandla isignali yomsindo.
• Izinga Lomsindo Wedatha, kanyekanye kuwo womathathu ama-toms/conga.

CB Cowbell

• Idatha 16 Tunings ezahlukene
• Isikhathi Somsindo sokubola kwevolumu

MA Maracas

• Isikhathi Sedatha sokubola kwevolumu

I-Bass Synthesizer/CV 3

• Ukunqanyulwa Kwesihlungi Sedatha noma inani le-CV 3

Ngokungeziwe kumapharamitha ashiwo ngenhla, insimbi ngayinye inokulawula ivolumu engakwazi ukuhlelwa. Okufanayo kuya ku-master volume control. Uma kwenzeka nje ungase uzibuze ukuthi kungani izinkinobho zevolumu zibonakala zine-inertia encane kuzo - lokhu ukugwema izinguquko ezingadingeki.

INDLELA YOKUREKHODA – AMAPHETHINI OKUHLELA

Ekugcineni, sekuyisikhathi sokwenza amaphethini akho. Amakhono makhulu futhi ayinkimbinkimbi ngokwengxenye ngakho sisacela ukunaka kwakho (kanye nokubekezela, kunjalo).

• Izinhlobo ezahlukene zokuqopha
  I-sequencer ihlanganisa izindlela ezintathu ezihlukene zamaphethini wohlelo. Zonke zinemisebenzi ehlukene:
• Imodi yeManuwali
  Imodi yokuzenzela ngeke irekhode noma yimaphi amapharamitha womsindo. Lezi zikhathi kufanele zilungiswe ngesandla.
• Isinyathelo Imodi
  I-Step Mode (ukulungiselelwa kwasefekthri) ivumela ukuhlela kwezilungiselelo zepharamitha ehlukene ngesinyathelo ngasinye.
• Imodi yeJam
  I-Jam Mode ngokuyisisekelo iyafana ne-Step Mode. Ngokuphambene nemodi yesinyathelo, ungashintsha inani lepharamitha kuzo zonke izinyathelo zensimbi/ithrekhi "bukhoma" futhi kanyekanye ngaphandle kokushintsha noma ukushiya imodi Yokurekhoda. Kumodi yesinyathelo, kuzomele uqale ukhethe zonke izinyathelo ngenkinobho ethi Khetha ukuze wenze iqhinga elifanayo. Uma kwenzeka lokho ukuhlela okubukhoma nokuhlela ngesikhathi esisodwa kuyilokho olwela ukukwenza, i-Jam Mode izokwenza umsebenzi omuhle. Imvamisa, i-Step Mode iyinketho yakho yokuqala yokwakha amaphethini ngayo.
• Ukukhetha imodi yokuqopha:
  Ukukhetha Imodi Yokurekhoda oyikhethayo:
  • Bamba u-Shift + cindezela inkinobho yesinyathelo 15 (CB – Man/Step). Inkinobho ishintsha phakathi:
    • Imodi yokwenziwa ngesandla: (I-LED = eluhlaza)
    • Isinyathelo Sesinyathelo: (I-LED = ebomvu)
    • Imodi yeJam: (I-LED = ewolintshi).
  • Cindezela inkinobho ethi Khetha ekhanyayo. Imodi ekhethiwe iqala ukusebenza.

Inqubo yokuhlela iyafana kuwo wonke amamodi Okurekhoda. Umfanekiso olandelayo osekhasini 18 ubonisa kafushaneview yayo yonke imisebenzi ye-Step Record Mode. Izinombolo zibonisa indlela eyodwa engaba khona newusizo yokwakha iphethini efakwe ngokugcwele. Sicela uqaphele ukuthi lesi sibalo sesiphelileview. Ungase ufune ukuyisebenzisa njengendlela yokuqondisa - zonke izinyathelo zokuhlela ezidingekayo zizochazwa ngokuningiliziwe esigabeni esilandelayo.

Lesi sici asitholakali kumodi yokwenziwa ngesandla. Lapha, zonke izinyathelo zinezilungiselelo zomsindo ezifanayo, ezihambisana nezilungiselelo zamanje ze-knob. Amaleveli okuphimisa komuntu ngamunye namalangabi/ama-roll angahlelwa. Sicela ubone ngezansi.

Manje, sizochaza ngokuningiliziwe ukuthi ungahlela kanjani izilungiselelo zomsindo ngamunye ngesinyathelo ngasinye ku-Isinyathelo noma Imodi ye-Jam:

Ukukhetha isinyathelo kanye nesinyathelo ukuhlela

Njengamanje sibuka ithrekhi enezinyathelo ezimbalwa ezisebenzayo (ama-LED abomvu), isb BD 1 (i-BD 1 LED eluhlaza).

• Bamba okuthi Khetha + cindezela izinyathelo (uma zingakakhethiwe kakade). Isinyathelo se-LED(ama) flash(ama).
• Vula amafindo epharamitha ensimbi ekhethiwe (lapha BD1).
• Cindezela okuthi Khetha ukuze uqinisekise izinguquko zepharamitha (ama-LED wesinyathelo akhanya ngokuqhubekayo futhi).
• Ukuze udale izilungiselelo ezihlukene zomsindo kwezinye izinyathelo, vele uphinde inqubo

Ukuze ugcine izilungiselelo unaphakade, gcina iphethini ehleliwe

Kopisha izinyathelo

Ukuze ugcine izinto zishesha futhi kulula, ungakopisha izilungiselelo zesinyathelo esisodwa kwezinye izinyathelo:

• Bamba okuthi Khetha + cindezela isinyathelo. Ukulungiselelwa komsindo kwalesi sinyathelo manje sekukopishiwe.
• Setha izinyathelo ezengeziwe. Izinyathelo ezintsha zizoba nezilungiselelo zomsindo ezifanayo.

Ukusebenzisa ipharamitha yomsindo efihliwe

Izinsimbi BD 1, Toms/Congas kanye ne-Cowbell zinikeza ipharamitha eyodwa yomsindo engafinyelelwa kuphela Kumodi Yesinyathelo/Jam-Record. Uma imodi yokurekhoda ivuliwe futhi kukhethiwe enye yezinsimbi i-BD 1, i-Toms/Congas noma i-Cowbell, i-Sound LED iyaphazima. Ukuze ushintshe inani lepharamitha:

• Cindezela Umsindo (izibani ze-LED njalo). Ezinye izinkinobho zesinyathelo zizokhanyisa ngokuluhlaza. Isinyathelo ngasinye sibonisa inani lepharamitha.
• Ukuze ukhethe inani, cindezela eyodwa yezinkinobho zesinyathelo esikhanyayo (umbala ushintsha ube bomvu).
• Cindezela Umsindo ukuze uqinisekise ukufakwa kwenani. I-Sound LED iqala ukukhanya futhi.

Ukuhlela Imisebenzi eyengeziwe Isinyathelo ngasinye

Sebenzisa le misebenzi elandelayo ukuthuthukisa iphethini yakho nakakhulu. Sisasebenzela ithrekhi, isb BD 1 (i-BD 1 LED eluhlaza) enezinyathelo ezithile ezimisiwe (ama-LED abomvu). Isilandeleli sisasebenza.

I-Accent

Isinyathelo ngasinye kuthrekhi singaba neleveli eyodwa kwezintathu zokuphimisela:

• Cindezela inkinobho ethi Acc/Bend. Umsebenzi ushintsha phakathi kwamazinga amathathu okuphimisa (i-LED icishiwe = ithambile, eluhlaza = okuphakathi, ebomvu = phezulu).
• Cindezela isinyathelo esesivele sisebenza ukuze usebenzise ileveli yokugcizelela ekhethiwe (isinyathelo sokuvala i-LED).
• Cindezela isinyathelo futhi ukuze unike amandla isinyathelo futhi (isinyathelo se-LED sikhanyisa ngokubomvu futhi).

Uma ufuna ukusebenzisa ileveli yokuphimisa okufanayo ezinyathelweni ezimbalwa ngesikhathi esisodwa:

• Khetha izinyathelo ezimbalwa (bona "Khetha Izinyathelo").
• Cindezela inkinobho ethi Acc/Bend ukuze ukhethe ileveli yokuphimisela.
• Cindezela okuthi Khetha futhi ukuze uqinisekise umsebenzi.

Goba

Lo msebenzi "ugobisa" ukuphakama kwensimbi phezulu noma phansi. Kanye nama-accents, angasetshenziswa ezinyathelweni ezingazodwana (ezisebenzayo) zensimbi. Ikhiqiza isb. izigubhu zebhesi ze-D&B ezijwayelekile. Umphumela ungase uzwakale kuphela ngezilungiselelo zokubola ezinde. I-Bend isebenza ku-BD 1, BD 2, SD, LTC, MTC kanye ne-HTC.

• Bamba u-Shift + cindezela u-Acc/Bnd ukuze unike amandla umsebenzi we-Bend. I-LED iyakhanya (Lona umsebenzi ongaphansi, ofinyelelwa ngokusebenzisa inkinobho ye-shift).
• Cindezela isinyathelo osifunayo (esivele siyasebenza). Isinyathelo-LED siyacisha.
• Lungisa ukushuba kwe-Gobela nge-Data knob. Sicela uqaphele: umphumela awukazwakali!
• Cindezela isinyathelo osifunayo futhi ukuze usebenzise umsebenzi. Sekuyazwakala manje. (I-LED ikhanyisa ngokubomvu futhi).
• Hamba ngezinyathelo ezengeziwe uma uthanda: cindezela Isinyathelo, vula Idatha, cindezela okuthi Step futhi.
• Uma uthanda umphumela:
  • Bamba u-Shift + cindezela u-Acc/Bnd ukuze uvale umsebenzi.

Umlilo

Lo msebenzi udala i-flams resp. ama-drum rolls ezinyathelweni ezingazodwana (esezivele zisebenza).

Sicela uqaphele: Lo msebenzi awutholakali engomeni ethi ”Clap”, ”CV 1” kanye “CV 2/3”.

• Bamba i-Roll/Flam (ama-LED wesinyathelo akhanya ngokuluhlaza) + cindezela inkinobho ethi Isinyathelo ukuze ukhethe enye yamaphethini angu-16 amalangabi.
• Cindezela (sekuvele kuyasebenza) Izinyathelo (i-LED eluhlaza). Umbala ushintsha ube osawolintshi futhi iphethini ye-flam izwakala.
• Ukuze ukhethe enye iphethini ye-flam, phinda ubambe inkinobho ethi Roll/Flam (ama-LED wesinyathelo akhanya ngokuluhlaza) + Inkinobho yesinyathelo ukuze ukhethe enye iphethini yelangabi.
• Cindezela futhi (sesivele siyasebenza) Izinyathelo ukuze usebenzise iphethini entsha yelangabi.
  Uma uthanda umphumela:
• Cindezela okuthi Roll/Flam ukuze uvale umsebenzi.

Programming Synth- resp. Amathrekhi e-CV/Gate

Kumathrekhi i-CV1 ne-CV2/3 ungahlela imicimbi yamanothi. Lawa manothi athunyelwa nge-MIDI kanye ne-CV/gate interface ye-Tanzbär. Eduze kwalokhu, womabili amathrekhi ”dlala” amazwi amabili alula kakhulu we-synthe-sizer. Ziwusizo oluhle lokuqapha amathrekhi anothi ngaphandle kwesidingo semishini yangaphandle.

Nansi indlela yokuhlela ithrekhi ye-CV1 (i-CV2/3 isebenza ngendlela efanayo):

• Bamba inkinobho ethi Rec/ManTrg + Instrument/track CV1 ukuze ukhethe ithrekhi.
• Setha Izinyathelo. I-synthesizer yokuhola yangaphakathi idlala izinyathelo ezinobude obufanayo kanye nephimbo.

Ukuze uhlele amanothi kuthrekhi ye-CV1:

• Bamba i-Rec/ManTrg + cindezela inkinobho ye-Instrument/track CV1 ukuze ukhethe ithrekhi.
• Cindezela inkinobho yomsindo (i-LED ebomvu).
• Cindezela izinkinobho zesinyathelo 1 - 13. Bakhetha amanothi phakathi kuka-"C" no-"c".
• Cindezela izinkinobho zesinyathelo 14 – 16. Bakhetha ububanzi be-octave.
• Ngaso sonke isikhathi uma ucindezela izinyathelo 1 kuya ku-13 ngokulandelayo, isilandeleli sihamba ngesinyathelo esisodwa ukuya phambili. Kukhiqizwa ukulandelana kwenothi le-16.
• I-A/B isetha isinyathelo sokuthulisa.
• Ukukhetha kuxhuma izinyathelo ezimbalwa kumanani wenothi amade.
• Iphethini ihambisa isinyathelo esisodwa phambili.
• U-Shift uhlehlisa isinyathelo esisodwa emuva.

Ama-accents ne-CV 3 ku-Bass Track:

Ithrekhi yebhesi (Rec/Man/Trg + CV2) ihlelwe ngendlela efanayo. Ukwengeza, ungasebenzisa ama-accents. Lezi zihlelwe ngendlela efanayo nakumathrekhi esigubhu (bheka ngenhla). Nge-CV 3 ungakwazi ukulawula imvamisa yokunqanyulwa kwesihlungi se-synthesizer efakwe ngokufanele. Ukuze uhlele amanani e-CV 3, sicela ukhethe izinyathelo ekulandeleleni i-CV 2 futhi usebenzise inkinobho yedatha ukuze ufake amanani. Isebenza ngendlela efanayo nohlelo lwepharamitha yesinyathelo nesinyathelo kumathrekhi esigubhu.

Shova umsebenzi

Uma usebenzisa umsebenzi wokushova Kumodi Yokurekhoda, ithrekhi ngayinye ingaba nokuqina kwayo kokushova okukodwa:

• Bamba i-Rec/ManTrg + cindezela inkinobho ye-Instrument/track ukuze ukhethe insimbi/ithrekhi.
• Cindezela okuthi Shova (Ama-LED wesinyathelo akhanyise ngokuluhlaza).
• Cindezela Isinyathelo 1 - 16 ukuze ukhethe ukushuba kokuqina.
• Cindezela okuthi Shova futhi ukuze uvale umsebenzi wokushova.

Uma isetshenziswa kumodi ye-Google Play, umsebenzi wokushova usebenza emhlabeni jikelele futhi uthinta wonke amathrekhi ngendlela efanayo.

Ubude besinyathelo (Ubude bethrekhi)

Ubude bethrekhi bunqunywa Kumodi Yokurekhoda. Ithrekhi ngayinye ingaba nobude bethrekhi ngayinye phakathi kwezinyathelo ezi-1 neziyi-16. Lena indlela epholile yokwenza ama-grooves akhiwe ngama-poly-rhythms.

• Bamba i-Rec/ManTrg + cindezela inkinobho ye-Instrument/track ukuze ukhethe insimbi/ithrekhi.
• Bamba u-Shift + cindezela Ubude besinyathelo (Ama-LED ezinyathelo afashing ngokuluhlaza).
• Cindezela Isinyathelo 1 – 16 ukuze ukhethe ubude bethrekhi.
• Cindezela okuthi Khetha ukuze uqinisekise isilungiselelo.

Ukukala Nobude Bephethini

Kuze kube manje, besinamaphethini wokuhlela anezinyathelo ezingu-16 nezikali ezingu-4/4. Ngosizo lwemisebenzi elandelayo, uzokwazi ukudala ama-triplets kanye namanye amasiginesha "angavamile" esikhathi. Ngokuvamile, lezi zilungiselelo kufanele zenziwe ngaphambi kokuthi uqale izinyathelo zokuhlela, kodwa njengoba zikhethekile kakhulu, sibeke incazelo yazo kulesi sahluko.

Le misebenzi izilungiselelo zomhlaba wonke, okusho ukuthi ithinta wonke amathrekhi ngendlela efanayo. Njengoba Imodi Yokurekhoda ithinta amathrekhi ngamanye kuphela, kufanele senze lezi zilungiselelo nge-PLAY MODE. I-Rec/ManTrg LED kufanele IVALIWE.

Isikali

Ikhetha isiginesha yesikhathi namanani wamanothi. Amanani atholakalayo angu-32, 16th triplet, 16th, kanye ne-8th triplet. Lokhu kunquma inani lamabhithi ngaphakathi kwe-resp yebha. ubude bephethini bezinyathelo ezingama-32, 24, 16 noma eziyi-12. Ngamaphethini wezinyathelo ezingu-24 noma ezingu-32, ingxenye engu-B izokwakhiwa ngokuzenzakalelayo. Njengoba isikhathi esidingekayo ukuze ubuyisele ibha eyodwa siyefana kuzo zonke izilungiselelo zesikali, esikalini sokusetha esingu-32 isilandeleli sigijima ngokuphindwe kabili njengoba senza esikalini sika-16.

Ukuze uhlele isikali:

• Bamba u-Shift + cindezela Isikali (Ama-LED wesinyathelo 1 – 4 aluhlaza okotshani).
• Cindezela Isinyathelo 1 – 4 ukuze ukhethe isikali
• (Isinyathelo 1 = 32nd, Isinyathelo 2 = 16th triplet, Isinyathelo 3 = 16th, Isinyathelo 4 = 8th triplet).
• Isinyathelo sikhanya ngokusawolintshi.
• Cindezela okuthi Khetha ukuze uqinisekise isilungiselelo.

Kala

Lapha ungakwazi ukunquma inani lezinyathelo zephethini.

Lo msebenzi kufanele uhlelwe ngemva kokusetha isikali. Ngokusebenzisa izinombolo zesinyathelo ezihlukile kupharamitha yesikali (isb isikali = 16th-triplet kanye nesilinganiso = 14) ungakha zonke izinhlobo zezigqi "ezingavamile". Ukwakha isb ibhithi engu-3/4, sebenzisa isikali = 16 kanye nesilinganiso = 12. I-Waltz isadumile kakhulu, ikakhulukazi kubantu asebekhulile — iqembu okuhlosiwe, kubonakala kuphephile ukulicabanga.

Ukuze uhlele inani lokulinganisa:

• Bamba u-Shift + cindezela u-Meas (Ama-LED wesinyathelo 1 – 16 aluhlaza okotshani).
• Cindezela Isinyathelo 1 - 16 ukuze ukhethe inombolo yesinyathelo. Isinyathelo sikhanya ngokusawolintshi.
• Cindezela okuthi Khetha ukuze uqinisekise isilungiselelo.

Kopisha A-Ingxenye ukuze B-Ingxenye

Ngokushesha nje lapho usudale iphethini enobude bezinyathelo eziyi-16 ngobuningi, ungakwazi ukukopisha le ngxenye engu-“A”-engxenyeni (engakabi nalutho) ”B”. Lena indlela elula yokudala ukuhlukahluka kwamaphethini akhona.

• Ukuze ukopishele ingxenye engu-A engxenyeni engu-B, mane ucindezele inkinobho ethi A/B Kumodi Yokurekhoda.

Gcina Amaphethini

Amaphethini angagcinwa ngaphakathi kwebhange elikhethiwe njengamanje.

Sicela uqaphele: Awukho umsebenzi wokuhlehlisa. Ngakho-ke sicela uqaphele futhi ucabange kabili ngaphambi kokugcina...

• Bamba u-Shift + cindezela u-St Patt. Iphethini yamanje iboniswa yi-LED ekhanyayo eluhlaza. Izindawo zephethini ezisetshenzisiwe ziboniswa ngokubomvu okukhanyayo kwe-LED. Ezindaweni zephethini ezingenalutho ama-LED ahlala amnyama.
• Cindezela inkinobho yesinyathelo ukuze ukhethe indawo yephethini (i-LED ikhanya ngokubomvu njalo).
• Cindezela okuthi Shift ukuze unqande umsebenzi wesitolo.
• Cindezela okuthi Khetha ukuze uqinisekise umsebenzi wesitolo.

Sula Iphethini Yamanje

• Bamba u-Shift + cindezela u-Cl Patt. Iphethini esebenzayo njengamanje izosulwa.

Sicela uqaphele: Awukho umsebenzi wokuhlehlisa. Ngakho ngicela uqaphele futhi ucabange kabili...

IMISEBENZI YEMIDI

Izimbobo ezintathu ze-MIDI zisetshenziselwa ukuxhuma amadivayisi we-MIDI ku-Tanzbär. Amakhibhodi e-MIDI, izilawuli, nezigubhu kufanele zixhunywe ku-MIDI Ngo-1. I-MIDI In 2 ikakhulukazi ngeyokuvumelanisa kwe-MIDI (iwashi le-MIDI). Izilungiselelo zesiteshi se-MIDI ze-Tanzbär zilungisiwe futhi azikwazi ukuguqulwa. I-track CV 1 ethumela futhi yamukelwe esiteshini 1, i-CV 2 ethumela futhi yamukelwe esiteshini 2, futhi wonke amathrekhi esigubhu athumela futhi awamukele esiteshini 3. Ukuvumelanisa nezisetshenziswa zangaphandle ngewashi le-MIDI Iwashi le-MIDI lihlala lidluliswa futhi lamukelwe. Azikho izilungiselelo ezengeziwe okufanele zenziwe.

Ivunyelaniswe kumthombo wangaphandle wewashi le-MIDI, i-Tanzbär ingaqalwa njalo futhi iyekwe kusetshenziswa inkinobho yayo ethi Dlala. Iqala/ima ncamashí ekwehleni kwebha elandelayo ngaphandle kokuphuma ekuvumelaneni.

Umphumela wezinyathelo zokulandelanisa njengemiyalo yamanothi

Okuphumayo kwenothi kunganikwa amandla emhlabeni jikelele. Uzothola lo msebenzi kumenyu yokusetha.

• Bamba u-Shift + cindezela u-Setha (Isinyathelo 16). Imenyu yokusetha iyasebenza manje. Ama-LED akhanyayo 1 - 10 abona ngeso lengqondo amamenyu amancane atholakalayo.
• Cindezela inkinobho yesinyathelo sesi-8. Okuphumayo kwenothi kunikwe amandla.
• Ukucindezela Isinyathelo sesi-8 futhi kuguqula phakathi kokuvula (okuluhlaza) nokuvala (okubomvu).
• Cindezela okuthi Khetha ukuze uqinisekise umsebenzi.

Ukuthola amanothi e-MIDI kanye nesivinini sokucupha izinsimbi zesigubhu

Umsebenzi we-Drumsound expander

I-Tanzbär kufanele isethelwe ku-MANUAL TRIGGER MODE (Rec/ManTrg LED eluhlaza) ukuze isebenze njengesinwebi somsindo wesigubhu. Izinombolo zamanothi e-MIDI kanye neshaneli ye-MIDI (kusuka ku-#3 kuye ku-#16) kungasetshenziswa ezinsimbini zomculo kusetshenziswa umsebenzi othi "funda". Kusuka esinyathelweni sesi-3 (BD ​​1), i-LED yensimbi iyakhanya uma ilinde inothi le-MIDI elingenayo. Inothi le-MIDI, manje elidluliselwa e-Tanzbär, lizosetshenziswa ethuluzini. I-Tanzbär ishintshela ngokuzenzakalela ensimbini elandelayo (BD 2). Ngokushesha nje lapho wonke amathuluzi anikezwa inothi le-MIDI, i-Khetha i-LED iyakhanya. Cindezela okuthi Khetha ukuze uqinisekise nokugcina okufakile idatha bese uvala umsebenzi. Shiya umsebenzi ngaphandle kokulondoloza ukufakwa kwedatha ngokucindezela u-Shift. Kulesi simo, isilungiselelo sisebenza kuphela kuze kube yilapho i-Tanzbär yehliswa.

Lapho zonke izinsimbi zomculo zinikezwe kumanothi e-MIDI resp. ishaneli ye-MIDI ngale ndlela, i-Tanzbär ingadlalwa njengemojula yesigubhu ngokusebenzisa ikhibhodi, i-sequencer, noma ama-drum pads. Kumodi yokudlala, ungadlala izigubhu ezibukhoma iphethini ehleliwe.

Real Time Record

Uma i-Roll Record isebenza futhi, amanothi e-MIDI angenayo aqoshwa kusilandeli se-Tanzbär. Ngale ndlela ungarekhoda amaphethini ngesikhathi sangempela. Umsebenzi we-Roll Record uchazwe ekhasini le-12.

Thumela futhi wamukele ukulahlwa kwe-MIDI SysEx

Okuqukethwe kwephethini yebhange lamanje kungadluliswa njengokulahlwa kwe-MIDI.

• Bamba u-Shift + cindezela u-Lahla (Isinyathelo 9) ukuze uqale ukudluliswa kokulahla.

Ukuthola idatha ye-SysEx kuyenzeka njalo ngaphandle kokuvumela noma yimuphi umsebenzi. Uma idatha ye-SysEx yamukelwe, ibhange lephethini lamanje lizocishwa. Esimeni sokungasebenzi kahle kwe-SysEx, zonke izinkinobho zesinyathelo zizokhanya ngokubomvu. Sikweluleka ukuthi usebenzise izinhlelo zokusebenza zokudlulisa ze-SysEx ezilandelayo: I-MidiOx (Win) ne-SysEx Librarian (Mac).

Abasebenzisi be-MidiOx sicela niqaphele: Indawo yokulahlwa ethunyelwa ku-MidiOx kufanele ibe nosayizi olingana ncamashi no-114848 Bytes, ngaphandle kwalokho i-MidiOx izobonisa umlayezo wephutha.

Isilawuli se-MIDI

I-Tanzbär ithola idatha yesilawuli se-MIDI yemisebenzi yayo eminingi namapharamitha. Uzothola uhlu lwesilawuli se-MIDI kusithasiselo semanuwali (ikhasi 30). Ukuze uthole idatha yesilawuli se-MIDI, isiteshi se-MIDI 10 sihlala sisetshenziswa.

Ithrekhi Shift

Amathrekhi angaba ne-micro shifted resp. ibambezeleke ezingxenyana zemikhaza ngokusebenzisa izilawuli ze-MIDI. Lokhu kungase kudale imiphumela ethakazelisayo yesigqi. Sicela usebenzise isilawuli se-MIDI 89 ukuya ku-104 ukuhlela i-track shif

I-CV/GATE-INTERFACE / SYNC

Ngenxa ye-CV/isango kanye nesixhumi esibonakalayo sokuvumelanisa, i-Tanzbär iyahambisana nama-vin amaningitagama-e synthesizer, amakhompuyutha wezigubhu, nama-sequencers. Ukulandelana, okuhlelwe kumathrekhi i-CV 1 ne-CV 2/3, kudluliselwa ngamasokhethi e-CV/gate ye-Tanzbär.

Ukuguqula Izimpawu Zesango

Izimpawu zesango lokuphumayo (Isango 1 neSango 2) zingahlehliswa ngokuzimela:

• Bamba okuthi Shift + Isango (Isinyathelo 14). Isinyathelo 1 kanye nesinyathelo sesi-2 esikhanyayo eluhlaza.
• Cindezela Isinyathelo 1 noma Isinyathelo 2 ukuze uguqule amasignali esango lethrekhi 1 resp. ithrekhi 2 (i-LED ebomvu = ehlanekezelwe).
• Cindezela okuthi Khetha ukuze uqinisekise ukusebenza.

Vumelanisa/Qala Amasokhethi

Lawa masokhethi athumela noma athola impendulo yewashi le-analog. qala isignali ukuvumelanisa i-Tanzbär ne-vintage amakhompyutha ezigubhu kanye sequencers. Sicela uqaphele ukuthi isignali yewashi ekhiqizwe i-Tanzbär idluliselwa ngomfutho ohleliwe wokushova. Isici esihle esiyingqayizivele ngokwazi kwethu. Ngenxa yezizathu zobuchwepheshe, isango, iwashi, nezimpawu zokuqala/zokumisa zinevolumutage izinga 3V. Ngakho-ke zingase zingahambelani nawo wonke ama-vintagimishini e.

Vumelanisa/Qala Ngaphakathi kanye Nokukhipha

Lo msebenzi unquma ukuthi amasokhethi Qala/Misa kanye Newashi asebenza njengokufakwayo noma okuphumayo.

• Bamba okuthi Shift + Vumelanisa (Isinyathelo 13). Isinyathelo 13 sikhanya ngokuluhlaza.
• Cindezela Isinyathelo 13 ukuze umise lawa masokhethi njengokungenayo noma okokukhiphayo (i-LED ebomvu = okokufaka).
• Cindezela okuthi Khetha ukuze uqinisekise umsebenzi.

Ngicela uqaphele: Uma lawa masokhethi asethwa okokufaka, i-Tanzbär izoba impendulo ehambisanayo. "igqilazwe" kumthombo wewashi wangaphandle. Inkinobho ethi Dlala ngeke ibe nomsebenzi kuleli cala.

Isihlukanisi Sewashi

Okuphumayo kwewashi le-Tanzbär kufaka isihlukanisi sewashi. Izilungiselelo zayo zingafinyelelwa ngemenyu Yokusetha. Ama-LED akhanyayo 1 kuya ku-10 akhombisa imisebenzi yawo engaphansi.

• Bamba u-Shift + cindezela u-Setha (Isinyathelo 16). Imenyu yokusetha ivuliwe. Ama-LED akhanyayo 1 kuya ku-10 abonisa imisebenzi emincane.
• Cindezela Isinyathelo 5. Umsebenzi ushintsha phakathi:
  • "Isihlukanisi sivaliwe" = I-LED eluhlaza (isilinganiso sewashi = imikhaza engama-24 / inothi elingu-1/4 / ukuvumelanisa kwe-DIN)
  • ”i-divider on” = i-LED ebomvu (inani lesihlukanisi = inani lesikali esikhethiwe;
• Cindezela okuthi Khetha ukuze uqinisekise umsebenzi.

ISETHA IMISEBENZI

Imenyu yokusetha itholakala "ngaphansi" kwenkinobho yesinyathelo se-16. Lapha uzothola imisebenzi ethile yokusetha i-Tanzbär yakho. Ezinye zazo usuzazi, ezinye zizochazwa lapha.

Ukuze uvule imenyu Yokusetha:

• Bamba u-Shift + cindezela u-Setha (Isinyathelo 16). Imenyu yokusetha ivuliwe. Ama-LED akhanyayo 1 kuya ku-10 abonisa imisebenzi emincane.

Ukukhetha imisebenzi yokusetha:

• Cindezela izinkinobho zesinyathelo 1 – 10. I-LED ehambisanayo iyabaneka, ebonisa umsebenzi wokusetha onikwe amandla.

Ukufaka amanani:

• Cindezela inkinobho yesinyathelo esikhanyayo. Umsebenzi ushintsha phakathi kwamanani ahlukene afika kwamathathu, aboniswa yi-LED = off, red noma green.

Ukukhansela umsebenzi:

• Cindezela okuthi Shift.

Ukuze uqinisekise umsebenzi:

• Cindezela ukukhanyisa inkinobho ethi Khetha. Inani liyagcinwa futhi Imenyu Yokusetha ivaliwe.

Imisebenzi elandelayo yokusetha iyatholakala:

• Inkinobho yesinyathelo 1: I-Midi Trigger Funda
  • Sicela ubheke ekhasini 24.
• Inkinobho yesinyathelo sesi-2: Ukushuna i-synthesizer yangaphakathi
  • Uma lo msebenzi unikwe amandla, i-synthesizer yangaphakathi idlala ithoni enganyakazi ekuphakameni okungu-440 Hz. Ungayishuna usebenzisa inkinobho yeDatha. Ukushuna kuthinta womabili amazwi (umthofu nebhesi).
• Inkinobho yesinyathelo sesi-3: I-Lead Synth ivuliwe/vala
  • Khubaza i-synthesizer yokuhola yangaphakathi isb uma usebenzisa i-CV/Gate track 1 ukuze ulawule ama-synthesizer angaphandle.
• Inkinobho yesinyathelo 4: I-Bass Synth ivuliwe/ivaliwe
  • Khubaza i-bass synthesizer yangaphakathi isb uma usebenzisa i-CV/Gate track 2/3 ukuze ulawule ama-synthesizer angaphandle.
• Inkinobho yesinyathelo 5: Vumelanisa Isihlukanisi Sewashi
  • Vumelanisa isihlukanisi sewashi:
    • I-LED icishiwe = isihlukanisi sikhubazekile (amakhizane angama-24 ngenothi elingu-1/4 = ukuvumelanisa kwe-DIN),
    • I-LED ivuliwe = Isikali (16th, 8th triplets, 32nd njll.).
• Inkinobho yesinyathelo 6: Thulisa Iqembu
  • Lo msebenzi uhlobene nomsebenzi wokuthulisa ku-Play Mode. Uma isebenza, zombili izigubhu ze-bass ziyathuliswa ngokushesha nje lapho uthulisa eyodwa yazo.
    • I-LED icishiwe = umsebenzi uvaliwe
    • obomvu = BD 1 uthulisa BD 2
    • eluhlaza = BD 2 ithulisa BD 1
• Inkinobho yesinyathelo sesi-7: Sula iBhange Lephethini yamanje
  • Cindezela Isinyathelo 7 kabili ukuze usule ibhange lephethini esebenzayo njengamanje.
    • Qaphela, awukho umsebenzi wokuhlehlisa!
• Inkinobho yesinyathelo 8: Inothi le-MIDI livuliwe/livaliwe
  • I-sequencer idlulisela amanothi e-MIDI kuwo wonke amathrekhi.
• Inkinobho yesinyathelo 9: Qala/Stop Impulse/Level
  • Umsebenzi ushintsha phakathi
    • ”impulse” = i-LED ebomvu (isb. Urzwerg, SEQ-01/02) kanye
    • ”level” = i-LED eluhlaza (isb. TR-808, Doepfer).
• Inkinobho yesinyathelo 10: Ukusetha kabusha kwasefekthri
  • Isetha kabusha i-Tanzbär kuzilungiselelo zayo ezizenzakalelayo zasembonini. Okokuqala, inkinobho ethi Isinyathelo ikhanya ngokuluhlaza, cindezela
• Isinyathelo se-10 futhi ukuze uqinisekise umsebenzi. Chofoza okuthi Khetha ukuze ugcine izilungiselelo zasembonini unaphakade

Lo msebenzi uthinta kuphela izilungiselelo zomhlaba, hhayi inkumbulo yephethini. Amaphethini womsebenzisi ngeke abhalwe phezu noma asuswe. Uma ufisa ukulayisha kabusha amaphethini asefekthri, kufanele uwadlulisele ngokulahlwa kwe-MIDI ku-Tanzbär. Amaphethini asefekthri angalandwa ku-MFB webindawo.

ISITHASISELO

Ukuqaliswa kwe-MIDI

Izabelo zesilawuli se-MIDI

I-MFB – Ingenieurbüro Manfred Fricke Neue Str. 13 14163 Berlin, Germany

• www.mfberlin.de

Ukukopisha, ukusabalalisa nanoma yikuphi ukusetshenziswa kwezohwebo nganoma iyiphi indlela akuvunyelwe futhi kudinga imvume ebhaliwe yomkhiqizi. Imininingwane ingashintsha ngaphandle kwesaziso. Yize okuqukethwe kwale manuwali yabanikazi kuhlolisiswe amaphutha, i-MFB ayikwazi ukuqinisekisa ukuthi ayinaphutha kuyo yonke indawo. I-MFB ayikwazi ukuthweswa icala nganoma yiluphi ulwazi oludukisayo noma olungalungile ngaphakathi kwalo mhlahlandlela.

Amadokhumenti / Izinsiza

Umshini Wezigubhu ze-MFB MFB-Tanzbar Analog [pdf] Imaniwali yosebenzisayo MFB-Tanzbar Analog Machine Drum, MFB-Tanzbar, Analog Drum Machine, Drum Machine, Machine

Izithenjwa

• Imaniwali yosebenzisayo