MFB-Tanzbar Analog Drum Machine

PAKUPEDZAVIEW

Ndatenda kubva kwatiri kuMFB. Chekutanga tinoda kukutendai nekutenga Tanzbär. Isu tinokoshesa sarudzo yako zvakanyanya uye tinovimba uchave nekunakidzwa kwakawanda nechiridzwa chako chitsva.

Chii chinonzi Tanzbär (“Dancing Bear”)?

Tanzbär idhiramu komputa, ine chaiyo, analogi inonzwika chizvarwa uye yakaomesesa, pateni-yakavakirwa nhanho sequencer. Inotamba mamwe maseketi epamusoro eMFB zvigubhu zvikamu MFB-522 uye MFB-503, pamwe nezvimwe zvinhu zvitsva kuMFB zviridzwa.

Chii chaizvo chiri kuitika mukati meTanzbär? Iyi inguva pfupiview zvemabasa ayo:

Kugadzira inzwi:

• 17 madhiramu zviridzwa ane anosvika 8 tweakable uye anochengeteka paramita.
• Level mapoto pane ese madhiramu zviridzwa, plus master vhoriyamu (haisi kuchengetwa).
• Kubuda kwemunhu oga (muvaviri kunze kwekuombera).
• Yakareruka synthesizer ine imwe parameter imwe neimwe yekutungamira uye bass ruzha.

Sequencer:

• 144 mapatani (pa 3 seti resp. 9 mabhanga).
• 14 maturu arikuridza zviridzwa zvengoma.
• 2 mateki ezvirongwa zvenoti zviitiko (zvinobuda kuburikidza neMIDI uye CV / gedhi).
• Iko kusanganiswa kwenhamba yenhanho (1 kusvika 32) uye kuyera (4) inobvumira marudzi ese emasaini enguva.
• A/B pateni toggle
• Roll/Flam basa (zvakawanda zvinokonzeresa)
• Cheni basa (maketani maitiro - kwete kuchengetwa).
• Tevera mbeveve basa

Aya anotevera mabasa anogona kurongwa pane yega yega track (dhiramu chiridzwa):

• Kureba (1 - 32 nhanho)
• Shuffle intensity
• Tevera shanduko (kunonoka kudiki kwese track kuburikidza neMIDI controller)

Aya anotevera mabasa anogona kurongwa padanho rega rega (dhiramu chiridzwa):

• Pinda pa/kudzima
• Chiyero chemazwi
• Sound setting yechiridzwa chazvino
• Bend (pitch modulation - chete DB1, BD2, SD, toms/congas)
• Flam (multi-trigger = flam, rolls etc.)
• Yekuwedzera inzwi parameter (pazviridzwa zvakasarudzwa)

Aya anotevera mabasa anogona kurongwa padanho rega rega (CV tracks):

• Nhanho pa/kudzima (kubuda kuburikidza neMIDI note-on uye +/-gedhi)
• Pitch ine 3 octave range. Kubuda kuburikidza neMIDI manotsi uye CV
• Accent level (pabass track chete)
• 2nd CV (pane bass track chete)

Operation Modes

Manual Trigger Mode

• Kuridza zviridzwa kuburikidza nenhanho mabhatani uye / kana MIDI manotsi (ane velocity).
• Kuwanikwa kune ma paramita eruzha kuburikidza neknob kana MIDI controller.

Play Mode

• Kusarudzwa kwemuenzaniso
• Kuwana ma parameter eruzha kuburikidza nemaknobs
• Kuwanikwa kwekutamba mabasa (A / B patani yekuchinjisa, roll, zadza, uye mbeveve basa, pamwe nezvimwe)

Record Mode

• Kuronga pateni mune imwe yeatatu aripo modhi (Manual, Nhanho, kana Jam mode)

Synchronization

• MIDI wachi
• Sync chiratidzo (wachi) uye kutanga/kumisa kupinza kana kubuda; chinobuda wachi divider

Kwete zvakaipa, uh? Ehe, zvaisaita kuisa knobhu yakatsaurirwa kana bhatani rebasa rega rega pane yepamberi. Dzimwe nguva, yechipiri basa nhanho uye mamwe mabhatani musanganiswa anodiwa kuti uwane ese maficha. Kuve nechokwadi chekuti iwe neTanzbär yako muchava shamwari munguva pfupi iri kutevera, tinokupa zano kuti uverenge bhuku iri nemazvo. Iyi ichave yakanakisa uye iri nyore nzira yekuongorora yako Tanzbär zvizere - uye pane zvakawanda zvinoda kuongororwa. Saka tinokukumbirai: ndapota netseka kuverenga (uye kunzwisisa) iyi f… bhuku.

Iyo Mushandisi Interface

Sezvambotaurwa, mazhinji emabhatani eTanzbär anovhara anopfuura rimwe chete basa. Zvichienderana nemhando yakasarudzwa, basa remabhatani rinogona kuchinja. Iyi inotevera nhamba inokuratidza kuti ndeapi mamodhi uye mabasa ane hukama kune mamwe mabhatani.

Ndapota cherechedza kuti uku kuchangoperaview. Unogona kuishandisa zvakanyanya segwara rekutungamira. Iyo yakazara seti yemabasa uye matanho anodiwa ekushanda anozotsanangurwa gare gare mune zvinyorwa. Ndapota inzwa wakasununguka kuverenga.

CONNECTIONS UYE PAKUTANGA OPERATION

Rear panel connectors

Simba

• Ndokumbira ubatanidze 12V DC wall wart pano. Simba kumusoro/pasi Tanzbär uchishandisa ON/OFF switch. Ndokumbirawo udhonze magetsi kubva pamadziro kana iwe usingachashandise Tanzbär zvakare. Ndapota shandisai magetsi anosanganisirwa chete kana kuti ane zvirevo zvakafanana - hapana anosiya, ndapota!

MIDI In1 / MIDI Mu2 / MIDI Kunze

• Ndokumbira ubatanidze MIDI zvishandiso pano. MIDI keyboards uye drum pads zvinofanira kubatanidzwa ku MIDI Muna 1. MIDI Mu 2 inobata MIDI wachi data chete. Kuburikidza neMIDI kunze, iyo Tanzbär inotamisa noti zuva rematepi ese.

Sravana Sameeralu Serial 4th Audio Outs

• Tanzbär inoratidzira imwe huru odhiyo kunze uye matanhatu ekuwedzera chiridzwa kunze. Iwo ekupedzisira majeki estereo anoburitsa masaini maviri echiridzwa chimwe nechimwe - chimwe pachiteshi chega chega (kunze kweClap - iyi ruzha rwestereo). Ndokumbira batanidza zvinobuda netambo dzekuisa (Y-tambo). PaClap, ndapota shandisa tambo yestereo. Kana ukabaira tambo muchiridzwa kunze, ruzha rwunodzimwa kubva pane chikuru kunze. Ndokumbira ubatanidze mainin eTanzbär kune musanganiswa wekuteerera, kadhi renzwi, kana amp, usati iwe simba Tanzbär kumusoro.
  • BD Kunze kuruboshwe: Bassdrum1, kurudyi: Bassdrum 2
  • SD/RS Kunze kuruboshwe: Snaredrum, kurudyi: Rimshot
  • HH/CY Kunze: kuruboshwe: Vhura/Kuvhara Hihat, kurudyi: Cymbal
  • CP/Clap Out: iyo yekurwisa transients yakapararira pamunda we stereo
  • KUTI / CO Kunze: matatu Toms / Congas akapararira pamusoro penzvimbo yestereo
  • CB/CL Kunze: kuruboshwe: Clave, kurudyi: Cowbell

Top panel connectors

PaTanzbär's top panel iwe unowana yayo CV/gedhi interface. Inoburitsa control voltage (CV) uye masaini emagedhi eese matrack track. Padivi peizvi, chiratidzo chekutanga/kumira uye chiratidzo chewachi chinofambiswa kana kugamuchirwa pano.

• CV1: Kubuda kwepitch-CV track 1 (lead synthesizer)
• CV2: Kubuda kwepitch CV track 2 (bass synthesizer)
• CV3: Kubuda kwesefa-kudzora CV track 3 (bass synthesizer)
• Gedhi1: Kubuda kwegedhi chiratidzo track 1 (lead synthesizer)
• Gedhi2: Kubuda kwegedhi chiratidzo track 2 (bass synthesizer)
• Kutanga: Inotumira kana kugamuchira chiratidzo chekutanga / kumira
• Sync: Inotumira kana kugamuchira chiratidzo chewachi

Kuti uongorore akawanda eTanzbär maficha, hapana chauchazoda kunze kwesimba rekubatanidza uye huru odhiyo kunze.

PLAY/MANUAL TRIGGER Mode

Chekutanga ngatitarisei mamwe mademo maitiro kuti akupe iwe pfungwa yezvingaitwe neTanzbär. Panguva imwecheteyo isu tichadzidza "kuita" paTanzbär, ndiko kuti, kutamba mapatani, kuagadzirisa uye kuita manzwi. Kuti titambe zvakare uye tigadzirise manzwi nemapateni zvakafanorongwa, tinoda iyo PLAY/f0 MANUAL TRIGGER Mode. Kuronga mapatani isu tichapinda muRekodha Mode yatinozoongorora gare gare. Mufananidzo unotevera unoratidza kuperaview yePlay Mode nemabasa ayo.

Ndapota cherechedza kuti uku kuchangoperaview. Iwe unogona kuishandisa zvakanyanya seyekumisikidza - ese anodiwa matanho ekushanda akafukidzwa zvakadzama mune inotevera chinyorwa. Saka ndapota verenga nokungwarira.

1. Kudzvanya Nhanho/Instr-Bhatani inodzima Matuki resp. Zviridzwa (tsvuku LED = Mute).
2. Kuramba uchidzvanya Acc/Bnd toggles pakati pematatu maAccent-Levels (LED off/green/red). Accent inokanganisa Roll-Fnct.
3. Inotanga Knob-Rekodi-Fnct.:
   • Vhura neShift+Step11. Dzvanya Sarudza. Basa rinowanikwa kana richidiwa. Zvino rekodha mafambiro eknob:
   • Bata Ruzha + tinya Instr kuti usarudze Instrument.
   • Dzvanya Inzwi kuti utange kurekodha. Iyo LED inopenya kusvika kune inotevera "1" uye mwenje nguva dzose panguva inotevera inotevera bar.
   • Tweak Soundparameter Knobs panguva imwe chete. (- Chengeta Patani kana zvichidikanwa)
4. Kuchinja Roll-Fnct. on/off. Dzvanya Instr-Taster kugadzira Roll. Sarudza sarudzo:
   • Bata Roll/Flam + dzvanya Danho 1-4 (16th, 8th, 4th, 1/2 Note).
5. Anochinja Patani Chaining on/off:
   • Bata Chain + dzvanya Matanho (hapana mhinduro ye LED parizvino). Inoenderana Patani Chain inochengetwa kwenguva pfupi.
   • Dzvanya Chain kutamba zvakare Patani Chain.
6. A/B Patani Kuchinja:
   • Dzvanya A/B kushandura Pateni. LED ruvara kuratidza
   • A-Chikamu resp.
   • B- Chikamu. Gonesa kushandura otomatiki neShift+3.
7. Inogonesa Shuffle Sarudzo
   • Dzvanya Shuffle (ese Step-LEDs flash).
   • Sarudza Shuffle-Kusimba neDanho 1-16.
   • Dzvanya Shuffle kuti usimbise uye usiye basa.
8. Anoyeuka akachengetwa Parameter Values ​​yeyazvino Pateni.

Kuongororwa kwemanzwi

Mushure mekuita simba, Tanzbär's MANUAL TRIGGER Mode iri kushanda. Iyo LED "Rec/ManTrig" inogara ichivhenekera girini. Iye zvino unogona kukonzeresa ruzha nemabhatani eNhanho/Chiridzwa. Iwe unogona zvakare kugadzirisa manzwi ese neavo akatsaurirwa parameter control.

Play Mode

Muenzaniso Memory

Tanzbär's pattern memory memory inoshandisa matatu seti (A, B uye C) emabhangi matatu rimwe nerimwe. Bhanga rega rega rine mapatani gumi nematanhatu anoita 16 mapatani ese. Seti A yakazara nefekitari mapatani. Mabhangi 144 ne1 ane mabhiti makuru akagadzirwa neBerlin based techno wizard Yapacc, Bank 2 sports maitiro ekutanga e "MFB Kult" drummachine. Seti B uye C vakamirira zvisikwa zvako zvikuru. Kana zvichidikanwa, zviri mukati meSeti A zvinogona kunyorwa pamusoro.

Pattern Selection

Kuti usarudze mapatani, PLAY MODE kana MANUAL TRIGGER MODE inofanirwa kushanda. Iyo LED Rec/ManTrig inofanirwa kunge KUDZIMA kana kugara GREEN (ndapota tarisa kune fig.

• Bata Shift + dzvanya Set A bhatani. Seta A inosarudzwa.
• Bata Shift + tinya Bhatani reBhangi. Bhatani reBhangi rinochinja pakati peBhangi 1 (girinhi), 2 (tsvuku) ne3 (orenji).
• Dzvanya Step bhatani. Kana ukadzvanya Danho 1, pateni 1 inotakurwa etc. Red Step LEDs inoratidza yakashandiswa mapatani. Iyo patani yakatakurwa inovhenekera orenji.

Kana iyo sequencer ichimhanya, shanduko yemaitiro inogara ichiitwa pane inotevera pasi-beat yeinotevera bar.

Muenzaniso Playback

Tanga / misa sequencer\

• Dzvanya Play. Sequencer inotanga. Dzvanya Play zvakare uye sequencer inomira. Izvi zvinoshandawo kana Tanzbär yawiriraniswa kune MIDI-wachi.

Ndokumbira utarise: Mushure mekusimudzwa, Tanzbär inofanirwa kusetwa kuita PLAY Mode kuti itambe mapatani kumashure (dzvanya Rec/ManTrig, LED inofanirwa KUDZIMWA). Wobva wasarudza patani (tinya Pateni, Nhanho bhatani, ndapota ona pamusoro).

Gadzirisa Tempo

• Bata Shift + fambisa iyo Data knob.

Kuti udzivise kusvetuka kwe tempo, shanduko ye tempo inoitwa panguva chaiyo iyo iyo knob chinzvimbo ichienderana neyakapfuura tempo kuseta. Paunongoburitsa bhatani reShift, tempo nyowani inochengetwa. Iko hakuna tempo kuverenga paTanzbär. Hwaro hwemhando yeknob cover approx. 60 BPM kusvika 180 BPM. MuPlay Mode (Rec/ManTrig LED OFF), haugone chete kutamba mapatani aripo kumashure, unogona zvakare kuaita "kurarama" munzira dzinoverengeka. Mune iyi modhi, mabhatani eTanzbär anovhura mamwe mabasa akazvitsaurira. Mufananidzo unotevera unoratidza mabasa emabhatani ese akakodzera. Muchinyorwa chinotevera, mabasa aya achatsanangurwa zvakadzama.

1. Mute Function
   MuPLAY Mode, zviridzwa zvese zvinogona kunyaradzwa uchishandisa bhatani razvo rinoenderana Danho/Chiridzwa (semuenzaniso Nhanho 3 = BD 1, Nhanho 7 = Cymbal nezvimwewo). Iyo LED yemudziyo wakanyarara inovhenekera mutsvuku. Kana iyo pateni yachengetwa, inoshanda zvimumumu zvichachengetwa zvakare. Basa rechitoro rakavharwa papeji 23.
2. Accent Basa
   Inoisa mataurirwo pamatanho matatu akasiyana. Bhatani reAcc/Bnd rinochinja pakati pematanho matatu (LED off/green/red). MuPlay Mode, iyo Accent level inobata iyo Roll basa (ona pazasi).
3. Tweak ruzha / knob rekodhi basa
   MuPLAY Mode (LED Rec/ManTrig off) ese maparamita eruzha anogona kugadziridzwa uchishandisa f0 akatsaurirwa mafundo. Kana patani painoremerwa kubva mundangariro, iyo yazvino parameter f0 inosiyana neiyo ikozvino knob kuseta.
   Kana uchida, iwe unogona kurekodha knob tweaks mukati mebhari imwe mune sequencer. Izvi zvinoitwa neKnob Record basa. Inogoneswa neShift + Nhanho 11 uye inogona kushandiswa muPLAY Mode, kana zvichidikanwa.

Kurekodha mafambiro eknob:

• Bata Shift + dzvanya CP/KnobRec kugonesa Knob Record basa.
• Dzvanya Play kuti utange sequencer.
• Bata Ruzha + dzvanya Instrument bhatani kusarudza chiridzwa.
• Dzvanya Inzwi zvakare. Iyo Inzwi LED inopenya kusvika kudzika kwebhari rinotevera rasvika. Zvadaro inovhenekera nguva dzose pamusoro penguva yepati imwe inotamba shure.
• Ipo iyo pateni iri kushanda, tweak iyo inodiwa Parameter maknobs. Mafambiro acho anorekodhwa pamusoro peimwe bar/patani yekutamba.
• Kana imwe kutora ichidikanwa, ingo dzvanya Inzwi zvakare uye gadzirisa mapfundo.
• Kana uchida kurekodha maparamendi echimwe chiridzwa, ndapota bata Inzwi
• + dzvanya bhatani reInstrument kuti usarudze chiridzwa chitsva. Wobva wadzvanya Inzwi kuti utange kurekodha. Iwe haufanirwe kumisa sequencer chero nguva.

Kuti uchengetedze kuita kweknob yako zvachose, unofanirwa kuchengetedza iyo pateni

Iwe haufanirwe kuita iyo knob rekodhi basa kune yega yega "kutora" uye chiridzwa nekurova Shift + CP/KnobRec. Kana yangogoneswa, unogona kuishandisa kakawanda kusvika wadzima basa racho. Kana iwe ukabatidza knob kweanopfuura bhaa imwe apo "knob kurekodha", yakapfuura kurekodha inozonyorwa pamusoro. Kana iwe usingade mhedzisiro, ingo kurodha iyo parameter kurongedza, yakachengetwa mupateni, nekurova Sarudza. Izvi zvinogara zvichibatsira kana usiri kufara neknob kurekodha "tora".

Roll Basa

Play Rolls:

Kwete, hatisi kutaura nezvemitambo yekutevedzera kana imwe mhando yemakoni pano, asi nezve jams… Ndokumbirawo vhura PLAY MODE, kana usati watove. Dzvanya Roll/Flam kuti uite basa reRoll. Tanga iyo sequencer sezvo mhedzisiro inozonzwika chete kana iyo sequencer ichimhanya. Paunenge uchidzvanya bhatani reNhanho/Chiridzwa, chiridzwa chinowirirana chinotanga kukonzeresa. Iri basa rinozivikanwa uye rinozivikanwa se "noti dzokorora". Kugadziriswa kwezvinokonzeresa kunogona kuiswa kune mana akasiyana maitiro. Ivo vanotsamira paChikero kuseta (ndapota tarisa kune peji 22). Kuti uchinje sarudzo, ndapota bata Roll/Flam. Mabhatani eNhanho 1 - 4 anotanga kupenya. Dzvanya rimwe remabhatani eChinhanho kuti usarudze roll roll resolution.

Roll Record:

Iyi imhando ye "kuwedzera pa" chimiro kune iyo Roll basa. Kana Roll Record ikagoneswa, roll inoridzwa zvakare mune yega yega patani loop, kunyangwe iwe ukaburitsa bhatani reNhanho/Chiridzwa. Nekubata pasi Shift uye bhatani reInstrument rinoenderana, mipumburu inodzimwa zvakare.
Kugonesa iyo Roll Record basa:

• Bata Shift + dzvanya Roll Rec (Step 10).
• Dzvanya Roll Rec (Nhanho 10) zvakare. Bhatani rinochinja pakati peRoll Record off (LED green) uye Roll Record pa (LED tsvuku).
• Dzvanya Sarudza kuti usimbise uye uvhare basa racho.

Matanho akarekodhwa neRoll Record basa anogona kugadziriswa muNhanho Rekodha Mode senge chero mamwe matanho

Chain function (cheni mapatani)

Chain anosvika gumi nematanhatu mapatani "kurarama" neChain basa:

• Bata Chain + Matanho mabhatani kuti usarudze kutevedzana kwaunoda kwemapateni. Ndokumbira utarise kuti hapana ratidziro ye LED panguva ino.
• Dzvanya Chain zvakare kugonesa / kudzima iyo Chain basa. Iyo LED inovhenekera mutsvuku kana Chain ichishanda.

A/B Patani Toggle

Dzvanya bhatani reA/B kuti "kupisa" chikamu chechipiri chemuenzaniso (kana chiripo). Iyo LED inoshandura ruvara rwayo. Mapeteni ane nhanho dzinodarika gumi nenhanhatu dzinenge dzine B-chikamu. Kugonesa otomatiki toggle pakati pezvikamu zviviri, ndapota bata Shift + Nhanho 16 (AB on/off).

Shuffle Basa

Bata Shuffle + dzvanya rimwe remabhatani eNhanho kuti usarudze imwe yegumi nematanhatu iripo shuffle intensities. Mune Play mode, shuffle inobata zviridzwa zvese nenzira imwechete.

Sarudza Bhatani

Sets yakagadziridzwa parameter values ​​kudzokera kutsika dzakachengetwa mukati meiyo yazvino pateni.

Paunenge uchishandisa mabasa 1 kusvika 8 apo sarudzo yemuenzaniso ichishanda (Pattern LED mwenje), basa rinoenderana richaitwa maererano nenzira yakatsanangurwa pamusoro. Mune zvimwe zviitiko, sarudzo yemuenzaniso ichavharwa. Tapota ona mufananidzo uri papeji 9. Zvimwe chetezvo pakuwana mabasa aya muMANUAL TRIGGER MODE.

SHOUND Injini

Muchitsauko chino, tinoda kusuma chizvarwa chinonzwika uye maparamendi ayo.

Zviridzwa

Yese kurira kwengoma inogona kugadziridzwa zvakananga uchishandisa zvidzoreso zvechiridzwa chimwe nechimwe. Pamusoro peizvozvo, iyo Data knob inogovera imwezve parameter kune akawanda ezviridzwa. Inogona kuwanikwa pakarepo kana chiridzwa chasarudzwa.

Yakavanzwa Parameter "Inzwi"

MuRekodha Mode (uye chete muRekodha Mode), zvimwe zviridzwa zvinoratidzira imwe "yakavanzika" paramende inogona kuwanikwa kuburikidza neInzwi bhatani uye Nhanho mabhatani. Kana iyi parameter iripo pane chiridzwa, iyo Inzwi-LED inopenya mushure mekunge Rec/ManTrg yatsikiswa. Zvimwe pane izvi gare gare muchitsauko Record Mode.

BD 1 Bassdrum 1

• Attack Level yekurwisa-nguva pfupi
• Kuora Volume kuora nguva
• Pitch Nguva uye modulation kusimba kwepitch envelope
• Tune Pitch
• Noise Noise level
• Sefa Inzwi rechiratidzo cheruzha
• Data Distorion level
• Ruzha Inosarudza 1 pagumi nematanhatu akasiyana ekurwisa anopfuudza

BD 2 Bassdrum 2

• Kuora Nguva yekuora kwevhoriyamu (kusvika kune yakadzikama toni)
• Tune Pitch
• Tone Level yekurwisa-nguva pfupi

SD Snaredrum

• Tune Pitch ye toni 1 uye toni 2
• D-Tune Detune ye toni 2
• Snappy Noise level
• S-Kuora Kuora nguva yechiratidzo cheruzha
• Toni Inosanganisa masaini etoni 1 uye toni 2
• Kuora Vhoriyamu kuora nguva ye toni 1 uye toni 2
• Data Modulation kusimba kwepitch envelope

RS Rimshot

• Data Pitch

CY Cymbal

• Kuora Volume kuora nguva
• Tone Blends ese masaini
• Data Pitch / ruzha ruvara

OH Vhura Hihat

• Kuora Volume kuora nguva
• Dhata Pitch / ruzha ruvara rweOH uye HH

HH Yakavhara Hihat

• Kuora Volaume kuora nguva
• Dhata Pitch / ruzha ruvara rweOH uye HH

CL Claves

• Tune Pitch
• Kuora Volume kuora nguva

CP Claps

• Nguva yekuora ye "reverb" muswe
• Sefa Ruzha rweRuzha
• Attack Level yekurwisa-nguva pfupi
• Data Nhamba yekurwisa-nguva pfupi
• Inzwi 16 dzakasiyana kurwisa transients

LTC Yakaderera Tom / Conga

• Tune Pitch
• Kuora Nguva yekuora kwevhoriyamu (kusvika kune yakadzikama toni)
• Ruzha Nhanho bhatani 12 inoshandura pakati pe tom ne conga. Nhanho bhatani 13 inogonesa chiratidzo cheruzha.
• Data Noise level, panguva imwe chete kune ese matatu toms/congas.

MTC Mid Tom / Conga

• Tune Pitch
• Kuora Nguva yekuora kwevhoriyamu (kusvika kune yakadzikama toni)
• Ruzha Nhanho bhatani 12 inoshandura pakati pe tom ne conga. Nhanho bhatani 13 inogonesa chiratidzo cheruzha.
• Data Noise level, panguva imwe chete kune ese matatu toms/congas

HTC High Tom / Conga

• Tune Pitch
• Kuora Nguva yekuora kwevhoriyamu (kusvika kune yakadzikama toni)
• Ruzha Nhanho bhatani 12 inoshandura pakati pe tom ne conga. Nhanho bhatani 13 inogonesa chiratidzo cheruzha.
• Data Noise level, panguva imwe chete kune ese matatu toms/congas.

CB Cowbell

• Data 16 dzakasiyana tunings
• Inzwi Nguva yekuora kwevhoriyamu

MA Maracas

• Data Nguva yekuora kwevhoriyamu

Bass Synthesizer/CV 3

• Data Filter cutoff kana CV 3 kukosha

Mukuwedzera kune maparameter ataurwa pamusoro, chiridzwa chimwe nechimwe chine vhoriyamu yekudzora isingagoni kurongwa. Izvo zvakafanana zvinoenda kune master volume control. Kungoitira kuti iwe ungangodaro uchinetseka kuti nei mavhoriyamu evhoriyamu achiita seaine inertia diki kwavari - izvi ndezvekudzivirira zvisingadiwe nhanho shanduko.

RECORD Mode - PROGRAMM PATTERNS

Pakupedzisira, inguva yekugadzira yako mapatani. Kugona kwacho kwakakura uye zvimwe kwakaoma zvakaoma saka isu tichiri kukumbira kutarisisa kwako (uye moyo murefu, hongu).

• Iwo akasiyana Record Modes
  Iyo sequencer inoratidzira matatu akasiyana modhi kune mapatani ehurongwa. Vose vane mabasa akasiyana:
• Manual Mode
  Manual Mode haizorekodha chero ruzha paramita. Izvi nguva dzose zvinofanirwa kugadziriswa nemaoko.
• Step Mode
  Nhanho Mode (fekitari kumisikidza) inobvumira hurongwa hweakasiyana ruzha parameter marongero padanho.
• Jam Mode
  Jam Mode yakangofanana neNhanho Mode. Kusiyana neNhanho modhi, unogona kushandura kukosha kweparameter pamatanho ese echiridzwa / track "live" uye panguva imwe chete pasina kuchinja kana kusiya Rekodha modhi. MuNhanho modhi, iwe waizotanga wasarudza matanho ese neSarudza bhatani kuti uite hunyengeri hwakafanana. Kana iyo hurongwa hwehupenyu uye kugadzirisa panguva imwe chete ndizvo zvauri kuedza, iyo Jam Mode ichaita basa rakanaka. Kazhinji, iyo Nhanho Modhi ndiyo yako yekutanga sarudzo yekugadzira mapatani nayo.
• Rekodha modhi sarudzo:
  Kusarudza iyo Rekodha Modhi yesarudzo yako:
  • Bata Shift + dzvanya Step 15 bhatani (CB - Man/Step). Bhatani rinochinja pakati pe:
    • Manual mode: (LED = girini)
    • Step Mode: (LED = tsvuku)
    • Jam Mode: (LED = orenji).
  • Dzvanya bhatani rinopenya Sarudza. Iyo yakasarudzwa modhi inova inoshanda.

Iyo programming maitiro akafanana kune ese Record modes. Mufananidzo unotevera uri papeji 18 unoratidza muchidimbuview yeese Matanho Record Mode mabasa. Iwo manhamba anoratidza imwe inogoneka uye inobatsira nzira yekugadzira yakazara inoratidzirwa pateni. Ndapota cherechedza kuti nhamba iyi ichangoperaview. Iwe unogona kuda kuishandisa seyekumisikidza - ese anodiwa ekuronga nhanho anozofukidzwa zvakadzama muchikamu chinotevera.

Ichi chimiro hachiwanikwe muManual Mode. Pano, nhanho dzese dzine dhizaini dzakafanana, dzinoenderana neazvino knob marongero. Ega ega matauriro mazinga uye flams/rolls anogona kurongwa. Ndapota ona pazasi.

Zvino, isu tichatsanangura zvakadzama maitiro ekuronga ega ega magadzirirwo eruzha padanho muNhanho kana Jam Mode:

Kusarudza nhanho uye nhanho programming

Parizvino tiri kuona track ine akati wandei anoshanda matanho (red LEDs), semuenzaniso BD 1 (girinhi BD 1 LED).

• Bata Sarudza + dzvanya nhanho (s) (kana isati yatosarudzwa). Nhanho ye LED (s) flash(s).
• Tendeuka parameter knob (s) yechiridzwa chakasarudzwa (pano BD1).
• Dzvanya Sarudza kuti usimbise shanduko yeparameter (nhanho LED (s) vhenekera nguva dzose zvakare).
• Kuti ugadzire magadzirirwo akasiyana eruzha pane mamwe matanho, ingodzokorora maitiro

Kuti uchengetedze zvigadziriso zvachose, chengetedza maitiro akagadziridzwa

Kopa matanho

Kuti uchengetedze zvinhu nekukurumidza uye zviri nyore, unogona kukopa zvigadziriso zvenhanho imwe kune mamwe matanho:

• Bata Sarudza + dzvanya nhanho. Kuseta kwenzwi kwedanho iri kwave kukopwa.
• Isa mamwe matanho. Matanho matsva achange aine zvigadziriso zvakafanana zvenzwi.

Kushandisa yakavanzika inzwi parameter

Zviridzwa BD 1, Toms/Congas pamwe neCowbell zvinopa imwezve ruzha parameter inogona kuwanikwa chete muNhanho/Jam-Rekodha Mode. Kana Rekodha modhi yakagoneswa uye imwe yezviridzwa BD 1, Toms / Congas kana Cowbell inosarudzwa, iyo Inzwi LED inopenya. Kushandura kukosha kweparameter:

• Dzvanya Inzwi (mwenje ye LED nguva dzose). Mamwe mabhatani enhanho anopenya girini. Nhanho yega yega inoona kukosha kweparameter.
• Kuti usarudze kukosha, dzvanya rimwe remabhatani anopenya nhanho (ruvara rwunoshanduka kuita rutsvuku).
• Dzvanya Inzwi kuratidza kukosha kwekupinda. Iyo Inzwi LED inotanga kupenya zvakare.

Programming mamwe Mabasa pane Danho

Shandisa zvinotevera mabasa kuti uwedzere pateni yako zvakanyanya. Tichiri kushanda panjanji, semuenzaniso BD 1 (girini BD 1 LED) ine mamwe matanho akaiswa (ma LED matsvuku). Sequencer ichiri kushanda.

Accent

Nhanho imwe neimwe mu track inogona kuva neimwe yeatatu nhanho yekutaura:

• Dzvanya Acc/Bend bhatani. Iro basa rinochinja pakati peatatu mapikisi mazinga (LED off = yakapfava, yegirini = yepakati, tsvuku = ruzha).
• Dzvanya nhanho yagara ichishanda kuti uise iyo yakasarudzwa accent level (nhanho LED kure).
• Dzvanya nhanho zvakare kuti ugone nhanho zvakare (nhanho LED inovhenekera mutsvuku zvakare).

Kana iwe uchida kuisa iyo yakafanana nhanho yekutaura kune akati wandei matanho kamwechete:

• Sarudza matanho akawanda (ona "Sarudza Matanho").
• Dzvanya bhatani reAcc/Bend kuti usarudze nhanho yekutaura.
• Dzvanya Sarudza zvakare kuti usimbise basa.

Bend

Iri basa "inokotama" kurira kwechiridzwa kumusoro kana pasi. Pamwe chete nematauriro, anogona kuiswa kune ega (anoshanda) nhanho dzechiridzwa. Inogadzira eg yakajairwa D&B bass madhiramu. Mhedzisiro yacho inogona kungonzwika nekurebesa kuora. Bend inoshanda paBD 1, BD 2, SD, LTC, MTC uye HTC.

• Bata Shift + dzvanya Acc/Bnd kugonesa iyo Bend basa. Iyo LED inopenya (Iyi idiki-basa, inowanikwa nekushandisa bhatani rekuchinja).
• Dzvanya zvaunoda (yatoshanda) nhanho. Iyo nhanho-LED inodzima.
• Gadzirisa Bend kusimba neData knob. Ndokumbira utarise: maitiro haasati anzwika!
• Dzvanya danho raunoda zvakare kuti uise basa racho. Iko zvino yava kunzwika. (LED inovhenekera mutsvuku zvakare).
• Enda kune mamwe nhanho kana uchida: dzvanya Step, shandura Dhata, tinya Step zvakare.
• Kana iwe uchida mhedzisiro:
  • Bata Shift + dzvanya Acc/Bnd kuvhara basa.

Flam

Basa iri rinogadzira flams resp. ngoma inoyerera pamatanho ega ega (atoshanda).

Ndokumbira utarise: Iri basa harisi kuwanikwa pamatinji "Clap", "CV 1" uye "CV 2/3".

• Bata Roll/Flam (nhanho maLED anopenya girini) + tinya Step bhatani kuti usarudze imwe yegumi nematanhatu emhando dzemoto.
• Dzvanya (yatoshanda) Nhanho(s) (yegirini LED). Ruvara rwunoshanduka kuita orenji uye flam pateni inonzwika.
• Kuti usarudze imwe flam pateni, batazve Roll/Flam bhatani (nhanho maLED anopenya girini) + Nhanho bhatani kusarudza imwe flam pateni.
• Dzvanya zvakare (yatove kushanda) Nhanho (s) yekushandisa iyo itsva flam pateni.
  Kana iwe uchida mhedzisiro:
• Dzvanya Roll/Flam kuvhara basa.

Programming Synth- resp. CV/Gedhi Tracks

Pamateki CV1 uye CV2/3 unogona kuronga zviitiko zvenoti. Aya manotsi anotumirwa kuburikidza neMIDI uye Tanzbär's CV/gedhi interface. Padivi peizvi, mateki ese ari maviri "tamba" maviri akareruka manzwi e-synthe-sizer. Ndivo rubatsiro rwakanaka rwekutarisa zvinyorwa zvinyorwa pasina kudiwa kwemidziyo yekunze.

Iyi ndiyo nzira yekuronga iyo CV1 track (CV2/3 inoshanda nenzira imwechete):

• Bata Rec/ManTrg + Instrument/track bhatani CV1 kuti usarudze track.
• Ronga Matanho. Iyo yemukati lead synthesizer inotamba matanho nehurefu hwakafanana uye kukwirira.

Kuronga manotsi paCV1 track:

• Bata Rec/ManTrg + dzvanya Instrument/track bhatani CV1 kusarudza track.
• Dzvanya Inzwi bhatani (LED tsvuku).
• Dzvanya Step mabhatani 1 - 13. Vanosarudza manotsi pakati pe "C" na "c".
• Dzvanya Step mabhatani 14 - 16. Vanosarudza octave range.
• Pese paunodzvanya nhanho 1 kusvika 13 zvinozotevera, iyo sequencer inofamba pane imwe nhanho mberi. Kutevedzana kwegumi nematanhatu kunogadzirwa.
• A/B inoseta nhanho yekunyarara.
• Sarudzo inobatanidza nhanho dzakati wandei kune kureba kwenoti kukosha.
• Patani inofamba nhanho imwe kumberi.
• Shift inofambisa nhanho imwe kumashure.

Accents uye CV 3 paBass Track:

Iyo bass track (Rec/Man/Trg + CV2) yakarongwa nenzira imwe cheteyo. Uyezve, iwe unogona kushandisa ma accents. Izvi zvakarongwa nenzira imwechete sepamangoma edhiramu (ona pamusoro). NeCV 3 unogona kudzora iyo sefa cutoff frequency yeiyo yakashongedzerwa synthesizer. Kuronga CV 3 kukosha, ndapota sarudza matanho pa track CV 2 uye shandisa iyo Data knob kuisa kukosha. Inoshanda nenzira imwechete seye nhanho-ne-nhanho parameter programming pane madhiramu makwara.

Shuffle basa

Paunenge uchishandisa shuffle basa muRekodha Mode, track yega yega inogona kuve neyayo yega shuffle kusimba:

• Bata Rec/ManTrg + dzvanya Instrument/track bhatani kuti usarudze chiridzwa/track.
• Dzvanya Shuffle (Nhanho maLED anovhenekera girini).
• Dzvanya Danho 1 - 16 kusarudza shuffle intensity.
• Dzvanya Shuffle zvakare kuti uvhare shuffle basa.

Kana ichishandiswa muPlay mode, iyo shuffle basa inoshanda pasi rose uye inobata matiraki ese nenzira imwechete.

Kureba Kwenhanho (Track Length)

Kureba kwetrack kunotemerwa muRekodha Modhi. Imwe neimwe track inogona kuve neyayo yega kureba pakati pe1 uye 16 nhanho. Iyi inzira inotonhorera yekugadzira grooves inogadzirwa ne poly-rhythms.

• Bata Rec/ManTrg + dzvanya Instrument/track bhatani kuti usarudze chiridzwa/track.
• Bata Shift + dzvanya Danho Kureba (Nhanho LEDs fashing green).
• Dzvanya Danho 1 - 16 kuti usarudze kureba kwetimbo.
• Dzvanya Sarudza kuti usimbise kuseta.

Kuyera uye Kureba kwePateni

Kusvika parizvino, tanga tichironga mapatani ane nhanho gumi nematanhatu uye 16/4 zviyero. Nerubatsiro rweanotevera mabasa, iwe unozogona kugadzira matatu uye mamwe "asinganzwisisike" masiginecha enguva. Kazhinji, zvigadziriso izvi zvinofanirwa kuitwa usati watanga nhanho dzekuronga, asi sezvo dzakanyanya kukosha, takaisa tsananguro yavo muchitsauko chino.

Aya mabasa magadzirirwo epasirese, zvichireva kuti anobata matiraki ese nenzira imwechete. Sezvo iyo Rekodhi Modhi inobata matiraki ega ega, isu tinofanirwa kugadzira aya marongero muPLAY MODE. Iyo Rec/ManTrg LED inofanirwa kudzima.

Scale

Inosarudza siginicha yenguva uye kukosha kwenoti. Hwaro huripo ndehwemakumi matatu nemaviri, gumi nematanhatu, 32th, uye 16th triplet. Izvi zvinotarisa huwandu hwemabhiti mukati mebar resp. kureba kwepateni ye16, 8, 32 kana nhanho gumi nembiri. Iine mapatani e24 kana 16 nhanho, B-chikamu chinozogadzirwa otomatiki. Sezvo nguva inodiwa kuridza kumashure bhaa imwe yakafanana mune zvese zvikero, pachikero che12 chinoteedzera chinomhanya zvakapetwa kaviri sezvachinoita pachikero che24.

Kugadzira kuyera:

• Bata Shift + dzvanya Chikero (Nhanho LEDs 1 - 4 inopenya girini).
• Dzvanya Danho 1 - 4 kusarudza chikero
• (Danho 1 = 32nd, Danho 2 = 16th triplet, Danho 3 = 16th, Danho 4 = 8th triplet).
• Danho rinopenya orenji.
• Dzvanya Sarudza kuti usimbise kuseta.

Kuyera

Pano iwe unogona kuona nhamba yematanho epateni.

Iri basa rinofanirwa kurongwa mushure mekuisa chiyero. Nekushandisa nhamba dzenhanho dzakasiyana nechiyero chechiyero (semuenzaniso chiyero = 16th-triplet uye kuyera = 14) unogona kugadzira marudzi ese e "odd" mabhiti. Kugadzira semuenzaniso 3/4 kurova, shandisa sikero = 16 uye kuyera = 12. Waltz ichiri kufarirwa zvakanyanya, kunyanya nevanhu vakura — boka rako raunonongedza, rinoratidzika kunge rakachengeteka kufunga.

Kuronga kukosha kwechiyero:

• Bata Shift + dzvanya Meas (Step LEDs 1 - 16 inopenya girini).
• Dzvanya Danho 1 - 16 kusarudza nhamba yenhanho. Danho rinopenya orenji.
• Dzvanya Sarudza kuti usimbise kuseta.

Kopa A-Chikamu kuB-Chikamu

Paunenge uchinge wagadzira patani ine hurefu hwematanho gumi nematanhatu pakureba, unogona kukopa iyi "A" -chikamu pane (ichiri isina) "B" -chikamu. Iyi inzira iri nyore yekugadzira misiyano yemaitiro aripo.

• Kukopa iyo A-chikamu paB-chikamu, ingo dzvanya A/B bhatani muRekodha Mode.

Chengetedza Maitiro

Mapeteni anogona kuchengetwa mukati mebhangi rakasarudzwa parizvino.

Ndokumbira utarise: Hapana kusandura basa. Saka ndapota chenjera uye funga kaviri usati wachengeta…

• Bata Shift + dzvanya St Patt. Iyo yazvino maitiro inoratidzwa negirinhi inopenya LED. Nzvimbo dzepatani dzakashandiswa dzinoratidzwa ne LED inopenya tsvuku. Panzvimbo dzisina chinhu pateni ma LED anogara akasviba.
• Dzvanya Step bhatani kuti usarudze pateni nzvimbo (LED inovhenekera yakatsvuka nguva dzose).
• Dzvanya Shift kuti ubvise basa rechitoro.
• Dzvanya Sarudza kuti usimbise basa rechitoro.

Bvisa Patani Yazvino

• Bata Shift + dzvanya Cl Patt. Iyo pateni inoshanda parizvino ichabviswa.

Ndokumbira utarise: Hapana kusandura basa. Saka ndapota chenjera uye funga kaviri…

MIDI MABASA

Iwo matatu MIDI ports anoshandiswa kubatanidza MIDI zvishandiso kuTanzbär. MIDI keyboards, controllers, and drumpads should be connected to MIDI In 1. MIDI In 2 inonyanya kuenderana neMIDI synchronization (MIDI wachi). Tanzbär's MIDI chiteshi marongero akagadziriswa uye haagone kuchinjwa. Tevera CV 1 inotumira uye inogamuchira pachiteshi 1, track CV 2 inotumira uye inogamuchira pane chiteshi 2, uye ese madhiramu engoma anotumira uye anogashira pane chiteshi 3. Kuwiriranisa nemidziyo yekunze kuburikidza neMIDI wachi MIDI wachi inogara ichitumirwa nekugamuchirwa. Hapana mamwe marongero anofanirwa kuitwa.

Yakawiriraniswa kune yekunze MIDI wachi sosi, Tanzbär inogona nguva dzose kutangwa uye kumisa kushandisa yayo Play bhatani. Iyo inotanga/inomira chaizvo pakudzika kweinotevera bhaa pasina kubuda mukuwirirana.

Kubuda kwematanho ekuteedzera semirairo yenoti

Chinyorwa chinobuda chinogona kugoneswa pasi rose. Iwe uchawana basa iri mune setup menu.

• Bata Shift + dzvanya Setup (Nhanho 16). Iyo yekuseta menyu iri kushanda ikozvino. Iwo anopenya maLED 1 - 10 fungidzira aripo mamenu madiki.
• Dzvanya Step 8 bhatani. Manotsi anobuda akabatidzwa.
• Kudzvanya Nhanho 8 zvakare inochinja pakati pe (yegirini) uye kudzima (tsvuku).
• Dzvanya Sarudza kuti usimbise basa racho.

Kugamuchira MIDI manotsi uye velocity kukonzeresa zviridzwa zvengoma

Drumsound expander basa

Tanzbär inofanirwa kusetwa kuMANUAL TRIGGER Mode (Rec/ManTrg LED yegirini) kuti ishande sedhiramu rinonzwika rinowedzera. MIDI nhamba dzenoti uye MIDI chiteshi (kubva #3 kusvika #16) inogona kuiswa kune zvigubhu zviridzwa uchishandisa "dzidza" basa. Kutanga padanho rechitatu (BD 3), chiridzwa che LED chinopenya kana chakamirira chinouya MIDI noti. Chinyorwa cheMIDI, ikozvino chaendeswa kuTanzbär, chichaiswa kuchiridzwa. Tanzbär inongo chinja kune chinotevera chiridzwa (BD 1). Kana zviridzwa zvese zvapihwa kune MIDI noti, iyo Sarudza LED inopenya. Dzvanya Sarudza kuti usimbise uye uchengetedze yekupinda data uye kuvhara basa. Siya basa racho usina kuchengetedza yekupinda data nekudzvanya Shift. Muchiitiko ichi, kuseta kunongoshanda kusvika Tanzbär yadzikiswa.

Kana zvese zviridzwa zvengoma zvakapihwa MIDI manotsi resp. MIDI chiteshi neiyi nzira, Tanzbär inogona kuridzwa sedhiramu module nekushandisa keyboard, sequencer, kana madhiramu pads. MuPlay Mode, unogona kuridza zvigubhu mhenyu kune yakarongwa patani.

Yechokwadi Nguva Rekodhi

Kana Roll Record ichishanda zvakare, iwo anouya MIDI manotsi anorekodhwa muTanzbär's sequencer. Nenzira iyi unogona kurekodha mapatani munguva chaiyo. Iyo Roll Record basa rinotsanangurwa papeji 12.

Tumira uye ugamuchire MIDI SysEx dumps

Iyo pateni yemukati yebhangi razvino inogona kutamiswa seMIDI dump.

• Bata Shift + dzvanya Dump (Nhanho 9) kuti utange kutamisa marara.

Kugamuchira SysEx data inogara ichigoneka pasina kugonesa chero basa. Kana data reSysEx rikatambirwa, bhangi repateni razvino rinozonyorwa. Kana SysEx isingashande, mabhatani ese anopenya matsvuku. Tinokupa zano kuti ushandise anotevera SysEx kutamisa mafomu: MidiOx (Win) uye SysEx Librarian (Mac).

Vashandisi veMidiOx ndapota cherechedzai: Iyo yekuraswa inotumirwa kuMidiOx inofanirwa kunge iine saizi chaiyo ye114848 Bytes, zvikasadaro MidiOx icharatidza meseji yekukanganisa.

MIDI Controller

Tanzbär inogamuchira MIDI controller data kune mazhinji emabasa ayo uye paramita. Iwe uchawana MIDI controller runyorwa mune apendix yebhuku (peji 30). Kuti ugamuchire MIDI controller data, MIDI chiteshi 10 inogara ichishandiswa.

Track Shift

Mateki anogona kuve micro shifted resp. kunonoka muzvikamu zvezvikwekwe nekushandisa MIDI controller. Izvi zvinogona kugadzira zvinonakidza rhythmic mhedzisiro. Ndokumbira ushandise MIDI controller 89 kusvika 104 kuronga track shif

CV/GATE-INTERFACE / SYNC

Kutenda kune yayo CV / gedhi uye sync interface, Tanzbär inoenderana nevakawanda vintage synthesizer, makomputa edhiramu, uye sequencers. Kutevedzana, kwakarongwa pamatepi CV 1 uye CV 2/3, inofambiswa kuburikidza neTanzbär's CV/gedhi zvigadziko.

Inverting Gate Signals

Iyo yekubuda gedhi masaini (Gedhi 1 uye Gedhi 2) inogona kutenderedzwa yakazvimirira:

• Bata Shift + Gedhi (Chikamu 14). Nhanho 1 uye Nhanho 2 inopenya girini.
• Dzvanya Nhanho 1 kana Nhanho 2 kutenderedza masaini egedhi re track 1 resp. track 2 (tsvuku LED = inverted).
• Dzvanya Sarudza kuti usimbise kushanda.

Sync/Tanga Sockets

Aya masokisi anotumira kana kugamuchira analog wachi resp. tanga chiratidzo kuwiriranisa Tanzbär nevintage drum makomputa uye sequencers. Ndokumbira utarise kuti chiratidzo chewachi chinogadzirwa neTanzbär chinofambiswa kuburikidza neiyo programmed shuffle intensity. Chinhu chakanaka chakasarudzika sekuziva kwedu. Nekuda kwezvikonzero zvehunyanzvi, gedhi, wachi, uye kutanga/kumisa masaini ane voltage chiyero che3V. Saka vanogona kunge vasingaenderane nevin vesetage machines.

Sync / Tanga mukati uye kubuda

Iri basa rinotarisa kuti zvigadziko zveKutanga/Mira uye Clock zvinoshanda here sezvipo kana zvinobuda.

• Bata Shift + Sync (Danho 13). Nhanho 13 inopenya girini.
• Dzvanya Nhanho 13 yekumisikidza zvigadziko izvi sezvipo kana zvinobuda (red LED = kuisa).
• Dzvanya Sarudza kuti usimbise basa racho.

Ndapota cherechedza: Kana aya masokisi akamiswa seyekupinza, Tanzbär ichave synchro-nized resp. ”uranda” kunobva wachi yekunze. Iyo Play bhatani haizove nebasa mune iyi kesi.

Clock Divider

Tanzbär's wachi inobuda inoratidzira wachi divider. Zvirongwa zvaro zvinogona kuwanikwa kuburikidza neSetup menyu. Kupenya LEDs 1 kusvika 10 inoratidza mabasa ayo maduku.

• Bata Shift + dzvanya Setup (Nhanho 16). Iyo Setup menyu inogoneswa. Kupenya LEDs 1 kusvika 10 inoratidza madiki mabasa.
• Dzvanya Danho 5. Basa rinoshandura pakati pe:
  • ”divider off” = girini ye LED (clockrate = 24 ticks / 1/4 note / DIN-sync)
  • "divider pa" = LED tsvuku (divider value = yakasarudzwa chiyero kukosha;
• Dzvanya Sarudza kuti usimbise basa racho.

KUGADZIRA MABASA

Iyo Setup menyu inowanikwa "pasi" iyo Nhanho 16 bhatani. Pano iwe unowana mamwe mabasa ekumisikidza yako Tanzbär. Vamwe vavo unotoziva, vamwe vachatsanangurwa pano.

Kuvhura iyo Setup menyu:

• Bata Shift + dzvanya Setup (Nhanho 16). Iyo Setup menyu inogoneswa. Kupenya LEDs 1 kusvika 10 inoratidza madiki mabasa.

Kusarudza Setup mabasa:

• Dzvanya Step mabhatani 1 - 10. Inoenderana LED inopenya, iyo inoratidza yakagoneswa kuseta basa.

Kuisa kukosha:

• Dzvanya bhatani rinopenya Danho. Basa racho rinochinja pakati pezvinhu zvitatu zvakasiyana, zvinoratidzwa ne LED = off, tsvuku kana girini.

Kukanzura basa:

• Press Shift.

Kusimbisa basa:

• Dzvanya inopenya Sarudza bhatani. Iko kukosha kunochengetwa uye iyo Setup menyu yakavharwa.

Aya anotevera Setup mabasa anowanikwa:

• Nhanho bhatani 1: Midi Trigger Dzidza
  • Ndokumbira utarise kune peji 24.
• Nhanho bhatani 2: Kugadzirisa iyo yemukati synthesizer
  • Kana basa iri rikagoneswa, iyo yemukati synthesizer inoridza yakatsiga toni pagomba re440 Hz. Unogona kuigadzirisa uchishandisa Data knob. Iyo tuning inobata manzwi ese ari maviri (lead uye bass).
• Nhanho bhatani 3: Lead Synth on/off
  • Dzima iyo yemukati inotungamira synthesizer semuenzaniso paunenge uchishandisa iyo CV / Gedhi track 1 kudzora ekunze synthesizer.
• Nhanho bhatani 4: Bass Synth on/off
  • Dzima iyo yemukati bass synthesizer semuenzaniso paunenge uchishandisa iyo CV / Gedhi track 2/3 kudzora ekunze synthesizer.
• Nhanho bhatani 5: Sync Clock Divider
  • Batanidza wachi divider:
    • LED off = divider yakaremara (24 ticks per 1/4th noti = DIN sync),
    • LED pa = Scale (16th, 8th triplets, 32nd etc.).
• Danho bhatani 6: Nyamudza Boka
  • Iri basa rinoenderana nebasa rembeveve muPlay Mode. Kana ichishanda, ese ma bass madhiramu anonyaradzwa kana wangonyarara imwe yacho.
    • LED off = basa rakadzima
    • tsvuku = BD 1 inonyarara BD 2
    • girini = BD 2 inonyarara BD 1
• Danho bhatani 7: Bvisa ikozvino Pattern Bank
  • Dzvanya Nhanho 7 kaviri kuti ubvise ikozvino inoshanda patani bhangi.
    • Chenjerera, hapana basa rekugadzirisa!
• Nhanho bhatani 8: MIDI-noti tumira pa/kudzima
  • Iyo sequencer inotumira MIDI manotsi pamatiraki ese.
• Danho bhatani 9: Tanga/Stop Impulse/Level
  • Basa rinochinja pakati
    • ”impulse” = dzvuku LED (semuenzaniso Urzwerg, SEQ-01/02) uye
    • ”level” = green LED (eg TR-808, Doepfer).
• Danho bhatani 10: Factory Reset
  • Reset Tanzbär kune yayo fekitori default marongero. Kutanga, bhatani reNhanho rinopenya girini, dzvanya
• Nhanho 10 zvakare kusimbisa basa racho. Hit Sarudza kuchengetedza zvigadziriso zvefekitari zvachose

Iri basa rinobata chete marongero epasi rose, kwete iyo pateni memory. Mapatani emushandisi haazonyorwa kana kudzimwa. Kana iwe uchida kurodha zvakare mapatani efekitori, unofanirwa kuaendesa kuburikidza neMIDI-dump muTanzbär. Iyo fekitori mapatani anogona kutorwa kubva kuMFB website.

MASHOKO OKUWEDZERA

MIDI-Implementation

MIDI-Controller Mabasa

MFB – Ingenieurbüro Manfred Fricke Neue Str. 13 14163 Berlin, Germany

• www.mfberlin.de

Kukopa, kugovera kana chero kushandiswa kwekutengesa chero nzira kunorambidzwa uye inoda mvumo yakanyorwa nemugadziri. Zvinyorwa zvinogona kuchinja pasina chiziviso. Kunyangwe zviri mukati mebhuku rino revaridzi zvakanyatsotariswa zvikanganiso, MFB haigone kuvimbisa kuti haina kukanganisa mukati mese. MFB haigone kuve nemhosva kune chero ruzivo rwunotsausa kana rusina kururama mukati megwaro rino.

Zvinyorwa / Zvishandiso

MFB MFB-Tanzbar Analog Drum Machine [pdf] User Manual MFB-Tanzbar Analog Drum Machine, MFB-Tanzbar, Analog Drum Machine, Drum Machine, Machine

References

• User Manual