Mochine oa Drum oa Analog oa MFB-Tanzbar

FEELAVIEW

Kea leboha ho tsoa ho rona ho MFB. Pele ho tsohle re rata ho le leboha ka ho reka Tanzbär. Re ananela khetho ea hau haholo 'me re tšepa hore u tla ba le monate o mongata ka sesebelisoa sa hau se secha.

Tanzbär (“Dancing Bear”) ke eng?

Tanzbär ke komporo ea meropa, e nang le mofuta oa 'nete, oa molumo oa analoge le mokhoa o tsoetseng pele haholo, o ipapisitseng le mohlala. E bapala likarolo tse ling tse tsoetseng pele tsa li-drum tsa MFB MFB-522 le MFB-503, hammoho le likarolo tse ling tse ncha ka ho feletseng ho lisebelisoa tsa MFB.

Ho etsahalang hantle ka hare ho Tanzbär? Ena ke nako e khutšoanyaneview mesebetsi ea eona:

Ho hlahisa molumo:

• Lisebelisoa tsa meropa tse 17 tse nang le liparamente tse 8 tse ka fetoloang le tse ka bolokoang.
• Lipitsa tsa boemo ba lisebelisoa tsohle tsa meropa, hammoho le molumo o moholo (o sa bolokehe).
• Ho tsoa ka bomong (ka bobeli ntle le ho opa liatla).
• Synthesizer e bonolo e nang le paramente e le 'ngoe bakeng sa melumo ea lead le bass.

sequencer:

• 144 dipaterone (ka 3 lihlopha resp. 9 libanka).
• Lipina tse 14 tse hlahisang liletsa tsa meropa.
• Lipina tse 2 bakeng sa liketsahalo tsa lintlha tsa lenaneo (se hlahisoang ka MIDI le CV/heke).
• Motsoako oa nomoro ea mohato (1 ho isa ho 32) le ho lekanya (4) o lumella mefuta eohle ea ho saena nako.
• A/B paterone toggle
• Ts'ebetso ea Roll/Flam (ho susumetsa ka makhetlo a mangata)
• Mosebetsi oa ketane (mekhoa ea ketane - ha e bolokehe).
• Lekola tšebetso ea semumu

Mesebetsi e latelang e ka hlophisoa pina ka 'ngoe (seletsa sa meropa):

• Bolelele ba pina (mehato e 1 - 32)
• Shuffle matla
• Track shift (ho lieha ho hoholo ha pina eohle ka selaoli sa MIDI)

Mesebetsi e latelang e ka hlophisoa mohatong o mong le o mong (seletsa sa meropa):

• Tlosa/ho tima
• Boemo ba molumo
• Boemo ba molumo oa seletsa sa hajoale
• Koba (ho feto-fetoha ha molumo oa molumo - feela DB1, BD2, SD, toms/congas)
• Flam (li-trigger tse ngata = flam, rolls joalo-joalo)
• Paramethara e eketsehileng ea molumo (ho lisebelisoa tse khethiloeng)

Mesebetsi e latelang e ka hlophisoa mohatong o mong le o mong (lipina tsa CV):

• Tsamaea / tima (ho tsoa ka lintlha tsa MIDI le +/-heke)
• Phatlalatso e nang le mefuta e 3 ea octave. Tlhahiso ka lintlha tsa MIDI le CV
• Boemo ba molumo (ho pina ea bass feela)
• CV ea bobeli (ka pina ea bass feela)

Mekhoa ea ts'ebetso

Manual Trigger Mode

• Lisebelisoa tsa ho qala ka likonopo tsa mohato le/kapa lintlha tsa MIDI (ka lebelo).
• Ho fihlella liparamente tsa molumo ka likonopo kapa selaoli sa MIDI.

Mokhoa oa ho Bapala

• Khetho ea mohlala
• Ho fihlella liparamente tsa molumo ka likonopo
• Phihlello ea ho bapala (paterone ea A/B ea ho fetola, ho roll, ho tlatsa, le ts'ebetso ea semumu, le tse ling)

Rekota Mokhoa

• Ho hlophisa mohlala ho o mong oa mekhoa e meraro e fumanehang (Manual, Mohato, kapa Jam mode)

Kamahanyo

• Oache ea MIDI
• Letšoao la sync (oache) le ho qala / emisa ho kenya kapa tlhahiso; sekhetho sa oache se hlahisoang

Ha ho mpe, uh? Ehlile, ho ne ho sa khonehe ho beha kotola kapa konopo e inehetseng bakeng sa tšebetso e 'ngoe le e 'ngoe phanele e ka pele. Ka linako tse ling, boemo ba ts'ebetso ea bobeli le li-konopo tse ling lia hlokahala ho fihlella likarolo tsohle. Ho etsa bonnete ba hore uena le Tanzbär le tla ba metsoalle haufinyane, re u eletsa hore u bale bukana ena ka hloko. Ena e tla ba tsela e molemohali le e bonolo ka ho fetesisa ea ho hlahloba Tanzbär ea hau ka botlalo - 'me ho na le lintho tse ngata tse lokelang ho hlahlojoa. Kahoo rea u kopa: ka kopo itšoenye ho bala (le ho utloisisa) buka ena ea f….

Sehokelo sa Mosebelisi

Joalo ka ha ho se ho boletsoe, likonopo tse ngata tsa Tanzbär li koahela mesebetsi e fetang e le 'ngoe. Ho itšetlehile ka mokhoa o khethiloeng, mosebetsi oa likonopo o ka fetoha. Setšoantšo se latelang se tla u bontša hore na ke mekhoa efe le mesebetsi e amanang le likonopo tse itseng.

Ka kopo elelloa hore sena ke pheletso feelaview. U ka e sebelisa haholo-holo e le tataiso ea tataiso. Sehlopha se felletseng sa mesebetsi le mehato e hlokahalang ea ts'ebetso li tla hlalosoa hamorao sengolong. Ka kopo ikutloe u lokolohile ho tsoela pele ho bala.

LIKHOKANO LE TS'EBETSO E QALANG

Lihokelo tse ka morao

Matla

• Ka kopo, hokela wart ea 12V DC mona. Matlafatsa Tanzbär holimo/tlaase u sebelisa konopo ea ON/OFF. Ka kopo, hula motlakase leboteng haeba ha u sa sebelisa Tanzbär. Ka kopo sebelisa motlakase o kenyellelitsoeng feela kapa o nang le litlhaloso tse tšoanang hantle - ntle le mekhelo, ka kopo!

MIDI In1 / MIDI Ka 2 / MIDI Out

• Ka kopo, hokela lisebelisoa tsa MIDI mona. MIDI keyboards le drum pads li lokela ho hokela ho MIDI In 1. MIDI In 2 e sebetsana le data ea oache ea MIDI feela. Ka MIDI ho tsoa, ​​Tanzbär e fetisa letsatsi la lintlha tsa lipina tsohle.

Lits'oants'o tsa Audio

• Tanzbär e fana ka molumo o le mong oa mantlha le lisebelisoa tse ling tse tšeletseng. Ea morao ke li-jacks tsa stereo tse ntšang mats'oao a mabeli a liletsa e 'ngoe le e 'ngoe - e le 'ngoe seteisheneng ka seng (ntle le Clap - ona ke molumo oa stereo). Ka kopo, hokela liphetho ka likhoele tse kentsoeng (lithapo tsa Y). Bakeng sa Clap, ka kopo sebelisa thapo ea stereo. Haeba o hokela thapo seletsa, molumo oa hlakoloa ho tsoa ho main out. Ka kopo, hokela sehlooho sa Tanzbär ho motsoako oa molumo, karete ea molumo, kapa amp, pele o matlafatsa Tanzbär.
  • BD Ka ntle ho le letšehali: Bassdrum1, ka ho le letona: Bassdrum 2
  • SD/RS Ka ntle ho le letšehali: Snaredrum, ka ho le letona: Rimshot
  • HH/CY Tsoa: ka ho le letšehali: E bulehileng/e Koetsoe Hihat, ka ho le letona: Cymbal
  • CP / Clap Out: li-transients tsa tlhaselo li hasane ho pholletsa le lebala la stereo
  • HO / CO Out: Li-Tom / Conga tse tharo li hasane holim'a lebala la stereo
  • CB/CL Ho tsoa: ka ho le letšehali: Clave, ka ho le letona: Cowbell

Lihokelo tsa phanele tse holimo

Ho phanele e kaholimo ea Tanzbär u tla fumana sebopeho sa eona sa CV/heke. E hlahisa taolo ea voltage (CV) le matšoao a likeiti tsa lipina ka bobeli. Haufi le sena, lets'oao la ho qala/emisa le lets'oao la oache le fetisoa kapa le amoheloa mona.

• CV1: Sephetho sa pina-CV pina ea 1 (lead synthesizer)
• CV2: Sephetho sa pina ea CV ea pina ea 2 (bass synthesizer)
• CV3: Sephetho sa taolo ea filthara ea CV pina ea 3 (bass synthesizer)
• Gate1: Sephetho sa pina ea lets'oao la heke (lead synthesizer)
• Gate2: Sephetho sa pina ea 2 ea lets'oao la heke (bass synthesizer)
• Qala: E romela kapa e amohela letšoao la ho qala/emisa
• Sync: E romella kapa e amohela lets'oao la oache

Ho hlahloba boholo ba likarolo tsa Tanzbär, ha u na ho hloka letho haese khokahano ea motlakase le audio ea mantlha e tsoang.

BAPALA/MANUAL TRIGGER MOKHOA

Pele ho tsohle, a re hlahlobeng mekhoa ea demo ho u fa leseli la seo Tanzbär e ka se etsang. Ka nako e ts'oanang, re tla ithuta ho "sebetsa" ho Tanzbär, ke hore, ho bapala lipaterone, ho li fetola le ho theola melumo. Ho bapala le ho nchafatsa melumo le lipaterone tse reriloeng esale pele, re hloka PLAY/f0 MANUAL TRIGGER MODE. Ho lipaterone tsa lenaneo re tla kena ho Record Mode eo re tla e hlahloba hamorao. Setšoantšo se latelang se bontša ho fetaview ea Mokhoa oa ho Bapala le mesebetsi ea ona.

Ka kopo elelloa hore sena ke pheletso feelaview. U ka e sebelisa haholo-holo e le tataiso - mehato eohle e hlokahalang ea ts'ebetso e hlalositsoe ka botlalo temaneng e latelang. Kahoo ka kopo bala ka hloko.

1. Tobetsa Mohato/Instr-Button e khutsisa Lipina resp. Lisebelisoa (LED e khubelu = Mute).
2. Khafetsa ho tobetsa Acc/Bnd toggles lipakeng tsa Accent-Levels tse tharo (LED off/green/red). Accent e ama Roll-Fnct.
3. E qala Knob-Record-Fnct.
   • Dumella ka Shift+Step11. Tobetsa Khetha. Mosebetsi oa fumaneha haeba o lakatsa. Joale rekota metsamao ea likonopo:
   • Tšoara Sound + tobetsa Instr ho khetha Instrument.
   • Tobetsa Sound ho qala ho rekota. LED e bonesa ho fihla ho "1" e latelang 'me e khantša khafetsa nakong ea bar e latelang.
   • Tweak Soundparameter Knobs nakong ea bar e le 'ngoe. (- Boloka Paterone haeba ho hlokahala)
4. E fetola Roll-Fnct. ho/ tima. Tobetsa Instr-Taster ho hlahisa Roll. Khetha tharollo:
   • Tšoara Roll/Flam + tobetsa Mohato oa 1-4 (16th, 8th, 4th, 1/2 Note).
5. Ho bulela/ho tima mokhoa oa ho kenya Paterone:
   • Tšoara Chain + tobetsa Mehato (ha ho na karabelo ea LED hajoale). Paterone Chain e Tšoanang e bolokiloe ka nakoana.
   • Tobetsa Chain ho bapala Paterone Chain.
6. A/B Pattern Toggle:
   • Tobetsa A/B ho fetola Paterone. Lipontšo tsa mebala ea LED
   • A-Karolo ea karabo.
   • B- Karolo. Lumella ho fetoha ha othomathiki ka Shift+3.
7. E nolofalletsa Khetho ea Shuffle
   • Tobetsa Shuffle (tsohle Step-LEDs flash).
   • Khetha Shuffle-Intensity ka Mohato oa 1-16.
   • Tobetsa Shuffle ho netefatsa le ho tlohela tshebetso.
8. E hopola boleng ba Parameter bo bolokiloeng ba Paterone ea hajoale.

Teko ea melumo

Hang ka mor'a ho sebetsa, Tanzbär's MANUAL TRIGGER MODE e ea sebetsa. LED "Rec/ManTrig" e lula e khantša botala. Joale o ka tsosa melumo ka likonopo tsa Mohato / Seletsa. U ka boela ua fetola melumo eohle ka li-control tsa bona tse inehetseng.

Mokhoa oa ho Bapala

Memori ea Mohlala

Mehopolo ea mohlala ea Tanzbär e sebelisa lihlopha tse tharo (A, B le C) tsa libanka tse tharo e 'ngoe le e 'ngoe. Banka e 'ngoe le e' ngoe e na le lipaterone tse 16 tse etsang lipaterone tse 144 ka kakaretso. Seta A e na le lipaterone tsa feme. Libanka 1 le 2 li na le li-beats tse kholo tse entsoeng ke setsebi sa theknoloji sa Berlin Yapacc, Banka ea 3 lipapali tsa mekhoa ea pele ea "MFB Kult" drummachine. Li-Sets B le C li emetse liqapi tsa hau tse kholo. Haeba o lakatsa, litaba tsa Set A li ka hlakoloa.

Khetho ea Mohlala

Ho khetha lipaterone, PLAY MODE kapa MANUAL TRIGGER MODE e tlameha ho sebetsa. The LED Rec/ManTrig e lokela ho tima kapa ho lula e LE TELA (ka kopo sheba feiga.

• Tšoara Shift + tobetsa konopo ea Seta A. Seta A e khethiloe.
• Tšoara Shift + tobetsa konopo ea Banka. Konopo ea Banka e fetoha pakeng tsa Bank 1 (e tala), 2 (e khubelu) le 3 (orange).
• Tobetsa konopo ea Mohato. Haeba u tobetsa Mohato oa 1, mohlala oa 1 o kentsoe joalo-joalo. Red Step LEDs e bontša mekhoa e sebelisitsoeng. Paterone e kentsoeng hajoale e khantša lamunu.

Ha sequencer e ntse e sebetsa, phetoho ea paterone e lula e etsoa ho theolelo e latelang ea bar e latelang.

Mokhoa oa ho bapala

Qala / emisa sequencer\

• Tobetsa Bapala. Sequencer e qala. Tobetsa Bapala hape mme sequencer e eme. Sena se boetse se sebetsa ha Tanzbär e hokahantsoe le oache ea MIDI.

Ka kopo hlokomela: Kamora ho kenya motlakase, Tanzbär e tlameha ho hlophisoa ho PLAY MODE hore e bapalle lipaterone morao (tobetsa Rec/ManTrig, LED e tlameha ho tima). Ebe u khetha mohlala (tobetsa Mohlala, konopo ea Mohato, ka kopo sheba ka holimo).

Fetola Tempo

• Tšoara Shift + tsamaisa konopo ea Data.

Ho qoba ho tlola tempo, phetoho ea tempo e etsoa ka nako eo boemo ba knob bo lumellanang le maemo a fetileng a tempo. Hang ha o lokolla konopo ea Shift, tempo e ncha e bolokiloe. Ha ho na tempo readout Tanzbär. Boleng ba boleng ba sekoaelo sa knob hoo e ka bang. 60 BPM ho 180 BPM. Ho Play Mode (Rec/ManTrig LED OFF), u ke ke ua bapala feela lipaterone tse seng li ntse li le teng, u ka li fetola "phela" ka mekhoa e mengata. Ka mokhoa ona, likonopo tsa Tanzbär li bula mesebetsi e itseng e inehetseng. Setšoantšo se latelang se bontša mesebetsi ea likonopo tsohle tse amehang. Mo temaneng e e latelang, ditiro tse di tla tlhalosiwa ka botlalo.

1. Mosebetsi oa Bulisa
   Ho PLAY MODE, lisebelisoa tsohle li ka khutsisoa ho sebelisoa konopo ea Mohato/Seletsa e tsamaellanang le eona (mohlala, Mohato oa 3 = BD 1, Mohato oa 7 = Cymbal joalo-joalo). LED ea sesebelisoa se khutsitseng e bonesa bofubelu. Ha mohlala o bolokiloe, limumu tse sebetsang le tsona li tla bolokoa. Mosebetsi oa lebenkele o kenyelelitsoe leqepheng la 23.
2. Mosebetsi oa Accent
   E beha li-accents maemong a mararo a fapaneng. Konopo ea Acc/Bnd e toggles lipakeng tsa maemo a mararo (LED off/green/red). Ho Play Mode, boemo ba Accent bo ama mosebetsi oa Roll (sheba ka tlase).
3. Fetola melumo / ts'ebetso ea ho rekota
   Ho PLAY MODE (LED Rec/ManTrig off) liparamente tsohle tsa molumo li ka hlophisoa ho sebelisoa likonopo tsa tsona tse f0 tse inehetseng. Hang ha paterone e laeloa ho tsoa mohopolong, paramethara ea hajoale f0 e fapana le maemo a hajoale a likonopo.
   Haeba o lakatsa, o ka rekota li-tweaks tsa knob ka har'a bar e le 'ngoe ho sequencer. Sena se etsoa ka mosebetsi oa Knob Record. E nolofalitsoe ka Shift + Mohato oa 11 'me e ka sebelisoa ho PLAY MODE, haeba ho le joalo.

Ho rekota metsamao ea likonopo:

• Tšoara Shift + tobetsa CP/KnobRec ho nolofalletsa mosebetsi oa Knob Record.
• Tobetsa Play ho qala sequencer.
• Tšoara Sound + tobetsa konopo ea Instrument ho khetha seletsa.
• Tobetsa Modumo hape. The Sound LED e benya ho fihlela ho fihla ho theolelo ea bar e latelang. Ebe e khantša khafetsa nakong ea mokhoa o le mong o bapalang morao.
• Ha paterone e ntse e sebetsa, lokisa likonopo tse lakatsehang tsa Parameter. Metsamao e rekotwa holim'a papali e le 'ngoe ea bar/pattern.
• Haeba ho hlokahala ho nka e 'ngoe, tobetsa feela Sound hape 'me u kenye likonopo.
• Haeba o batla ho rekota liparamente tsa seletsa se seng, ka kopo tšoara Sound
• + tobetsa konopo ea Instrument ho khetha sesebelisoa se secha. Ebe o tobetsa Sound ho qala ho rekota. Ha ua tlameha ho emisa sequencer ka nako efe kapa efe.

Ho boloka ts'ebetso ea knob ea hau ka ho sa feleng, u tlameha ho boloka paterone

Ha ua tlameha ho kenya tšebetsong rekoto ea knob bakeng sa "nka" e 'ngoe le e 'ngoe e ncha le sesebelisoa ka ho otla Shift + CP/KnobRec. Ha e se e lumelletsoe, u ka e sebelisa khafetsa ho fihlela o tima ts'ebetso. Haeba u bula konopo bakeng sa libaka tse fetang e le 'ngoe ha u ntse u "rekota" rekoto e fetileng e tla hlakoloa. Haeba u sa rate sephetho, kenya feela tlhophiso ea paramente, e bolokiloeng ka har'a paterone, ka ho otla Khetha. Sena se thusa kamehla ha o sa thabele ho rekota "nka".

Mosebetsi oa Roll

Bapala Rolls:

Che, ha re bue ka litšoantšiso kapa mefuta e meng ea li-scones mona, empa re bua ka jams… Ka kopo, lumella PLAY MODE, haeba ha u so bue. Tobetsa Roll/Flam ho etsa hore mosebetsi oa Roll. Qala sequencer kaha phello e tla utloahala feela ha sequencer e sebetsa. Ha o ntse o tobetsa konopo ea Mohato / Seletsa, sesebelisoa se tsamaisanang le sona se qala ho hlohlelletsoa hangata. Ts'ebetso ena e boetse e tsejoa ebile e tumme joalo ka "note pheta". Qeto ea li-triggers e ka behoa ho litekanyetso tse 'nè tse fapaneng. Li ipapisitse le maemo a Sekala (ka kopo sheba leqephe la 22). Ho fetola qeto, ka kopo, tšoara Roll/Flam. Likonopo tsa Mohato 1 - 4 li qala ho benya. Tobetsa e 'ngoe ea likonopo tsa Mohato ho khetha qeto ea moqolo.

Roll Record:

Ena ke mofuta oa "eketsa ho" tšebetsong ea Roll. Ha Roll Record e lumelletsoe, moqolo o bapaloa hape ka har'a loop e 'ngoe le e' ngoe e ncha, leha o lokolla konopo ea Mohato/Seletsa. Ka ho tšoara Shift le konopo ea Instrument e tsamaellanang, meqolo e tla hlakoloa hape.
Ho nolofalletsa mosebetsi oa Roll Record:

• Tšoara Shift + tobetsa Roll Rec (Mohato oa 10).
• Tobetsa Roll Rec (Mohato oa 10) hape. Konopo e fetoha lipakeng tsa Roll Record off (LED green) le Roll Record on (LED e khubelu).
• Tobetsa Kgetha ho netefatsa le ho kwala tshebetso.

Mehato e tlalehiloeng ka mosebetsi oa Roll Record e ka hlophisoa ka Mode oa Mohato oa Rekoto joalo ka mehato e meng

Mosebetsi oa ketane (mefuta ea ketane)

Kopanya ho fihla ho lipaterone tse 16 "phela" ka ts'ebetso ea Chain:

• Tšoara likonopo tsa Chain + Mohato ho khetha tatellano e lakatsehang ea lipaterone. Ka kopo hlokomela hore ha ho na referense ea LED hajoale.
• Tobetsa Chain hape ho thusa / ho tima tšebetso ea Chain. LED e bonesa e khubelu ha Chain e sebetsa.

A/B Pattern Toggle

Tobetsa konopo ea A/B ho "chesa" karolo ea mohlala ea bobeli (haeba e le teng). LED e fetola 'mala oa eona. Lipaterone tse nang le mehato e fetang 16 li na le karolo ea B. Ho etsa hore ho betwe lipakeng tsa likarolo ka bobeli, ka kopo, tšoara Shift + Mohato oa 3 (AB on/off).

Mosebetsi oa Shuffle

Tšoara Shuffle + tobetsa e 'ngoe ea likonopo tsa Mohato ho khetha e 'ngoe ea matla a 16 a teng a shuffle. Ho Play mode, shuffle e ama lisebelisoa tsohle ka tsela e ts'oanang.

Khetha Konopo

E beha boleng bo fetotsoeng ho khutlela ho boleng bo bolokiloeng ka har'a mokhoa oa hona joale.

Ha o sebelisa ts'ebetso ea 1 ho isa ho 8 ha khetho ea paterone e ntse e sebetsa (Pattern LED mabone), ts'ebetso e ts'oanang e tla etsoa ho latela tsela e hlalositsoeng kaholimo. Maemong a mang, khetho ea mohlala e tla koaloa. Ka kopo, sheba setšoantšo se leqepheng la 9. Ho joalo le ka phihlello ea mesebetsi ena ho MANUAL TRIGGER MODE.

TS'ELISO TS'OANE

Khaolong ena, re rata ho kenyelletsa tlhahiso ea molumo le likarolo tsa eona.

Lisebelisoa

Melumo eohle ea meropa e ka hlophisoa ka kotloloho ho sebelisoa litsamaiso tsa seletsa ka seng. Ho phaella moo, knob ea Data e arolelana parameter e eketsehileng bakeng sa lisebelisoa tse ngata. E ka fumaneha hang ha sesebelisoa se khethoa.

Parameter e patiloeng "Modumo"

Ka Mokhoa oa Rekoto (mme feela ka Mokhoa oa Rekoto), lisebelisoa tse ling li na le "parameter" e 'ngoe e patiloeng e ka fihlellehang ka konopo ea Molumo le likonopo tsa Mohato. Haeba parameter ena e fumaneha sesebelisoa, Sound-LED e benya ka mor'a hore Rec/ManTrg e hatisoe. Tse ling mabapi le sena hamorao khaolong ea Rekota Mode.

BD 1 Bassdrum 1

• Tlhaselo Boemo ba tlhaselo-ea nakoana
• Ho bola Nako ea ho senyeha ha molumo
• Nako ea Pitch le matla a ho feto-fetoha ha molumo oa enfelopo ea molumo
• Tune Pitch
• Boemo ba lerata
• Sefe Modumo wa lerata
• Boemo ba ho kheloha ha data
• Molumo o Khetha 1 ho tse 16 tse fapaneng tsa tlhaselo ea nakoana

BD 2 Bassdrum 2

• Ho bola Nako ea ho senyeha ha molumo (ho fihlela molumo o tsitsitseng)
• Tune Pitch
• Molumo Boemo ba tlhaselo-e fetelletseng

SD Snaredrum

• Beha molumo oa molumo oa 1 le molumo oa 2
• D-Tune Detune ea molumo oa 2
• Boemo ba lerata la Snappy
• S-Decay Ho bola nako ea lets'oao la lerata
• Molumo o kopanya matshwao a medumo 1 le modumo wa 2
• Ho bola Nako ea ho senyeha ha molumo oa molumo oa 1 le molumo oa 2
• Matla a ho feto-fetoha ha data a enfelopo ea molumo

RS Rimshot

• Sekhahla sa data

CY Cymbala

• Ho bola Nako ea ho senyeha ha molumo
• Molumo o kopanya matshwao ka bobedi
• Phaello ea data / 'mala oa molumo

OH Open Hihat

• Ho bola Nako ea ho senyeha ha molumo
• Phaello ea data / 'mala oa molumo oa OH le HH

HH Koala Hihat

• Nako ea ho bola ea Volaume
• Phaello ea data / 'mala oa molumo oa OH le HH

CL Claves

• Tune Pitch
• Ho bola Nako ea ho senyeha ha molumo

CP Claps

• Nako ea ho bola ea "leetsi" mohatla
• Sefa Mmala wa modumo
• Tlhaselo Boemo ba tlhaselo-ea nakoana
• Data Number of attack-transients
• Sound 16 fapaneng tlhaselo transients

LTC Low Tom / Conga

• Tune Pitch
• Ho bola Nako ea ho senyeha ha molumo (ho fihlela molumo o tsitsitseng)
• Konopo ea Mehato ea molumo 12 e fetola pakeng tsa tom le conga. Mohato oa 13 o nolofalletsa lets'oao la lerata.
• Boemo ba Lerata la data, ka nako e le 'ngoe bakeng sa toms/congas tse tharo kaofela.

MTC Mid Tom / Conga

• Tune Pitch
• Ho bola Nako ea ho senyeha ha molumo (ho fihlela molumo o tsitsitseng)
• Konopo ea Mehato ea molumo 12 e fetola pakeng tsa tom le conga. Mohato oa 13 o nolofalletsa lets'oao la lerata.
• Boemo ba Lerata la data, ka nako e le 'ngoe bakeng sa toms/congas tse tharo kaofela

HTC High Tom / Conga

• Tune Pitch
• Ho bola Nako ea ho senyeha ha molumo (ho fihlela molumo o tsitsitseng)
• Konopo ea Mehato ea molumo 12 e fetola pakeng tsa tom le conga. Mohato oa 13 o nolofalletsa lets'oao la lerata.
• Boemo ba Lerata la data, ka nako e le 'ngoe bakeng sa toms/congas tse tharo.

CB Cowbell

• Lintlha tse 16 tse fapaneng tsa tokiso
• Molumo Nako ea ho senyeha ha molumo

MA Maracas

• Data Nako ea ho senyeha ha molumo

Bass Synthesizer/CV 3

• Sekhao sa Filter ea data kapa boleng ba CV 3

Ho phaella ho li-parameter tse boletsoeng ka holimo, sesebelisoa ka seng se na le taolo ea molumo e ke keng ea hlophisoa. Ho joalo le ka taolo ea molumo oa master. Feela haeba u ka 'na ua ipotsa hore na ke hobane'ng ha likonopo tsa molumo li bonahala li na le inertia e nyenyane ho tsona - sena ke ho qoba liphetoho tse sa batleheng tsa boemo.

MOKHOA OA REKHOTA – MEFUTA EA THULATSO

Qetellong, ke nako ea ho iketsetsa mekhoa ea hau. Bokhoni bo boholo 'me bo batla bo rarahane, kahoo re ntse re kopa tlhokomelo ea hau (le mamello, ehlile).

• Mefuta e fapaneng ea Record
  Sequencer e na le mekhoa e meraro e fapaneng ea lipaterone tsa lenaneo. Kaofela li na le mesebetsi e fapaneng:
• Mokhoa oa Manual
  Manual Mode e ke ke ea rekota liparamente tsa molumo. Tsena ka linako tsohle li tlameha ho lokisoa ka letsoho.
• Mohato Mode
  Mohato oa Mohato (setting ea fektheri) e lumella lenaneo la litlhophiso tse fapaneng tsa paramethara ea molumo mohato ka mong.
• Mokhoa oa Jam
  Jam Mode ha e le hantle e tšoana le Mode oa Mohato. Ho fapana le Mokhoa oa Mohato, o ka fetola boleng ba paramente mehatong eohle ea sesebelisoa / pina "phela" mme ka nako e le 'ngoe ntle le ho fetola kapa ho tlohela mokhoa oa Rekota. Boemong ba Mohato, u tla tlameha ho qala ka ho khetha mehato eohle ka konopo ea Khetha ho etsa leqheka le tšoanang. Haeba u ntse u loanela ho etsa mananeo le ho hlophisa ka nako e le 'ngoe, Jam Mode e tla etsa mosebetsi o motle. Hangata, Mohato oa Bohato ke khetho ea hau ea pele ea ho etsa lipaterone ka.
• Khetho ea mokhoa oa ho rekota:
  Ho khetha Record Mode eo u e khethileng:
  • Tšoara Shift + tobetsa konopo ea Mohato oa 15 (CB - Man/Step). Konopo e fetoha lipakeng tsa:
    • Mokhoa oa matsoho: (LED = tala)
    • Mokhoa oa mohato: (LED = khubelu)
    • Jam Mode: (LED = orange).
  • Tobetsa konopo ea Khetha e benyang. Mokhoa o khethiloeng o qala ho sebetsa.

Mokhoa oa ho etsa mananeo o ts'oana ho mefuta eohle ea Record. Palo e latelang e leqepheng la 18 e bontša kakaretso e khutšoanyaneview ea mesebetsi eohle ea Step Record Mode. Linomoro li bonts'a mokhoa o le mong o ka khonehang le o sebetsang oa ho etsa paterone e hlahisitsoeng ka botlalo. Ka kopo hlokomela hore palo ena e felile feelaview. U ka 'na ua batla ho e sebelisa e le tataiso - mehato eohle e hlokahalang ea lenaneo e tla hlalosoa ka botlalo karolong e latelang.

Ts'ebetso ena ha e fumanehe ho Mokhoa oa Matsoho. Mona, mehato eohle e na le li-setting tsa molumo tse tšoanang, tse tsamaellanang le litlhophiso tsa hona joale tsa likonopo. Maemo a motho ka mong le li-flams/rolls li ka hlophisoa. Ka kopo sheba ka tlase.

Joale, re tla hlalosa ka botlalo mokhoa oa ho hlophisa litlhophiso tsa molumo ka mong mohato o mong le o mong ho Mohato kapa Jam Mode:

Khetho ea mehato le lenaneo la mehato

Hajoale re shebile pina e nang le mehato e mengata e sebetsang (li-LED tse khubelu), mohlala BD 1 (e tala BD 1 LED).

• Tšoara Khetha + tobetsa mehato (haeba e se e khethiloe). The step LED(s) flash(ts).
• Fetola likonopo tsa paramethara tsa sesebelisoa se khethiloeng (mona BD1).
• Tobetsa Khetha ho netefatsa liphetoho tsa paramethara (mahato a LED(li) khanya khafetsa hape).
• Ho theha litlhophiso tse fapaneng tsa molumo mehatong e meng, pheta mokhoa ona feela

Ho boloka li-setting ka ho sa feleng, boloka mokhoa o hlophisitsoeng

Kopitsa mehato

Ho boloka lintho li potlakile ebile li le bonolo, u ka kopitsa litlhophiso tsa mohato o le mong ho ea mehatong e meng:

• Tšoara Khetha + tobetsa mohato. Boemo ba molumo oa mohato ona joale bo kopitsoe.
• Beha mehato e meng. Mehato e mecha e tla ba le litlhophiso tse tšoanang tsa molumo.

Ho sebelisa parameter ea molumo o patiloeng

Lisebelisoa tsa BD 1, Toms/Congas hammoho le Cowbell li fana ka parameter e le 'ngoe ea molumo e ka finyelloang feela ka Mohato oa Mohato / Jam-Record. Haeba Record mode e nolofalitsoe 'me e' ngoe ea lisebelisoa BD 1, Toms / Congas kapa Cowbell e khethiloe, Molumo oa LED oa benya. Ho fetola boleng ba parameter:

• Tobetsa Sound (mabone a LED kamehla). Likonopo tse ling tsa mehato li tla benya botala. Mohato o mong le o mong o bonts'a boleng ba parameter.
• Ho khetha boleng, tobetsa e 'ngoe ea likonopo tsa mohato tse benyang ('mala o fetoha o mofubelu).
• Tobetsa Sound ho netefatsa kenyo ya boleng. The Sound LED e qala ho benya hape.

Mananeo a eketsehileng Mesebetsi ka Mohato

Sebelisa mekhoa e latelang ho ntlafatsa paterone ea hau le ho feta. Re ntse re sebetsa ka pina, mohlala BD 1 (e tala BD 1 LED) e nang le mehato e itseng e behiloeng (li-LED tse khubelu). Sequencer e ntse e sebetsa.

Mongolo

Mohato o mong le o mong pina e ka ba le e 'ngoe ea mekhahlelo e meraro ea molumo:

• Tobetsa konopo ea Acc/Bend. Ts'ebetso e fetoha lipakeng tsa maemo a mararo a accent (LED off = soft, green = medium, red = lerata).
• Tobetsa mohato o seng o ntse o sebetsa ho sebelisa boemo bo khethiloeng ba molumo (mohato oa LED o tima).
• Tobetsa mohato hape ho bula mohato hape (mohato oa LED o bonesa bofubelu hape).

Haeba u batla ho sebelisa boemo bo tšoanang ba lentsoe ho mehato e mengata ka nako e le 'ngoe:

• Khetha mehato e mengata (sheba "Khetha Mehato").
• Tobetsa konopo ea Acc/Bend ho khetha boemo ba molumo.
• Tobetsa Kgetha hape ho netefatsa tshebetso.

Kobeha

Ts'ebetso ena "e kobella" molumo oa seletsa holimo kapa tlase. Hammoho le li-accents, e ka sebelisoa ho mehato ea motho ka mong (e sebetsang) ea sesebelisoa. E hlahisa mohlala, meropa e tloaelehileng ea D&B. Phello e ka utloahala feela ka litlhophiso tse telele tsa ho bola. Bend e sebetsa ho BD 1, BD 2, SD, LTC, MTC le HTC.

• Tšoara Shift + tobetsa Acc/Bnd ho nolofalletsa tšebetso ea Bend. Leseli la LED (Ena ke karolo e nyane, e fumanehang ka ho sebelisa konopo ea shift).
• Tobetsa o lakatsehang (o seng o ntse o sebetsa) mohato. Mohato-LED oa tima.
• Fetola matla a Bend ka knob ea Data. Ka kopo hlokomela: phello ha e so utloe!
• Tobetsa mohato o lakatsehang hape ho sebelisa ts'ebetso. Hona joale e se e utloahala. (LED e khantša bofubelu hape).
• Eya bakeng sa mehato e meng haeba o lakatsa: tobetsa Mohato, fetola Data, tobetsa Mohato hape.
• Haeba u rata sephetho:
  • Tšoara Shift + tobetsa Acc/Bnd ho koala tšebetso.

Flam

Mosebetsi ona o etsa flams resp. meqomo ea meqomo ka mehato e ikemetseng (e seng e ntse e sebetsa).

Ka kopo hlokomela: Ts'ebetso ena ha e fumanehe lipina tsa "Clap", "CV 1" le "CV 2/3".

• Tšoara Roll/Flam (mohato oa li-LED tse benyang ka botala) + tobetsa konopo ea Mohato ho khetha e 'ngoe ea lipaterone tse 16 tsa malakabe.
• Tobetsa (e se e sebetsa) Mohato (ma) (LED e tala). 'Mala o fetoha oa lamunu' me mohlala oa flam o utloahala.
• Ho khetha mohlala o mong oa lelakabe, hape tšoara konopo ea Roll/Flam (mohato oa li-LED tse benyang botala) + Konopo ea mohato ho khetha mohlala o mong oa lelakabe.
• Tobetsa hape (e se e ntse e sebetsa) Mohato(me) ho sebelisa paterone e ncha ea flam.
  Haeba u rata sephetho:
• Tobetsa Roll/Flam ho koala tšebetso.

Lenaneo la Synth- resp. Lipina tsa CV/Heke

Lipineng CV1 le CV2/3 o ka hlophisa liketsahalo tsa lintlha. Lintlha tsena li romelloa ka MIDI le Tanzbär's CV/gate interface. Haufi le sena, lipina ka bobeli "bapala" mantsoe a mabeli a bonolo haholo a synthe-size. Ke thuso e ntle ea ho beha leihlo lipina tsa lintlha ntle le tlhoko ea lisebelisoa tsa kantle.

Ena ke mokhoa oa ho hlophisa pina ea CV1 (CV2/3 e sebetsa ka tsela e ts'oanang):

• Tšoara konopo ea Rec/ManTrg + Instrument/track CV1 ho khetha pina.
• Beha Mehato. Synthesizer e ka hare ea lead e bapala mehato ka bolelele bo ts'oanang le molumo.

Ho fana ka lintlha ho pina ea CV1:

• Tšoara Rec/ManTrg + tobetsa konopo ea Instrument/track CV1 ho khetha pina.
• Tobetsa konopo ea Sound (bofubelu ba LED).
• Tobetsa likonopo tsa Mohato 1 - 13. Ba khetha lintlha pakeng tsa "C" le "c".
• Tobetsa likonopo tsa Mohato 14 – 16. Ba khetha mofuta oa octave.
• Nako le nako ha u tobetsa mehato ea 1 ho isa ho 13 ka mor'a moo, sequencer e tsamaea mohato o le mong ho ea pele. Tatelano ea lintlha tsa 16 e hlahisoa.
• A/B e beha mohato o sa bueng.
• Khetha e hokela mehato e mengata ho boleng ba lintlha tse telele.
• Mohlala o tsamaisa mohato o le mong pele.
• Shift e suthisa mohato o le mong morao.

Accents le CV 3 ho Bass Track:

Pina ea bass (Rec/Man/Trg + CV2) e hlophisitsoe ka tsela e tšoanang. Ho feta moo, o ka sebelisa li-accents. Tsena li hlophisitsoe ka mokhoa o ts'oanang le oa lipina tsa meropa (sheba ka holimo). Ka CV 3, o ka laola sekhahla sa "filter cutoff" sa synthesizer e nang le lisebelisoa tse loketseng. Ho hlophisa boleng ba CV 3, ka kopo khetha mehato ea pina ea CV 2 'me u sebelise knob ea data ho kenya boleng. E sebetsa ka mokhoa o ts'oanang le lenaneo la mohato ka mohato paramethareng ea lipina tsa meropa.

Ts'ebetso ea Shuffle

Ha o sebelisa ts'ebetso ea shuffle ho Record Mode, pina ka 'ngoe e ka ba le matla a eona a ho sisinyeha:

• Tšoara Rec/ManTrg + tobetsa konopo ea Instrument/track ho khetha seletsa/pina.
• Tobetsa Shuffle (Mohato oa LED o bonesa botala).
• Tobetsa Mohato 1 - 16 ho khetha shuffle intensity.
• Tobetsa Shuffle hape ho koala ts'ebetso ea shuffle.

Ha e sebelisoa ho Play mode, ts'ebetso ea shuffle e sebetsa lefats'eng ka bophara mme e ama lipina tsohle ka tsela e ts'oanang.

Bolelele ba Mohato (Track Bolelele)

Bolelele ba pina bo khethoa ho Mokhoa oa Rekoto. Pina e 'ngoe le e' ngoe e ka ba le bolelele ba pina ea eona lipakeng tsa 1 le mehato e 16. Ena ke tsela e ntle ea ho hlahisa li-grooves tse entsoeng ka poly-rhythms.

• Tšoara Rec/ManTrg + tobetsa konopo ea Instrument/track ho khetha seletsa/pina.
• Tšoara Shift + tobetsa Bolelele ba Mohato (Mohato oa LED o ntse o le botala).
• Tobetsa Mohato 1 - 16 ho khetha bolelele ba pina.
• Tobetsa Kgetha ho netefatsa tlhophiso.

Sekala le Bolelele ba Paterone

Ho fihlela joale, re ntse re etsa lipaterone tsa mananeo ka mehato e 16 le sekala sa 4/4. Ka thuso ea mesebetsi e latelang, u tla khona ho etsa li-triplets le tse ling "tse sa tloaelehang" tse saenneng. Hangata, litlhophiso tsena li lokela ho etsoa pele u qala mehato ea mananeo, empa kaha li batla li ikhethile, re behile tlhaloso ea tsona khaolong ena.

Mesebetsi ena ke litlhophiso tsa lefats'e, ho bolelang hore li ama lipina tsohle ka tsela e tšoanang. Kaha Mokhoa oa Rekoto o ama lipina tsa motho ka mong feela, re tlameha ho etsa litlhophiso tsena PLAY MODE. Rec/ManTrg LED e tlameha ho tima.

Sekala

E khetha tshaeno ea nako le boleng ba lintlha. Litheko tse teng ke 32nd, 16th triplet, 16th, le 8th triplet. Sena se lekanya palo ea li-beats ka har'a bar resp. mohlala oa bolelele ba mehato e 32, 24, 16 kapa 12. Ka mekhoa ea mehato e 24 kapa 32, karolo ea B e tla iketsetsa. Kaha nako e hlokahalang ea ho bapala bar e le 'ngoe e tšoana maemong ohle a sekala, ka sekala sa 32 sequencer e matha hantle habeli ho feta kamoo e etsang sekala sa 16.

Ho hlophisa sekhahla:

• Tšoara Shift + tobetsa Scale (Mohato oa LEDs 1 - 4 botala bo benyang).
• Tobetsa Mohato 1 - 4 ho khetha sekala
• (Mohato oa 1 = 32nd, Mohato oa 2 = 16th triplet, Mohato oa 3 = 16th, Mohato oa 4 = 8th triplet).
• Mohato o benya lamunu.
• Tobetsa Kgetha ho netefatsa tlhophiso.

Lekanya

Mona o ka tseba palo ea mehato ea mohlala.

Ts'ebetso ena e tlameha ho hlophisoa ka mor'a ho beha sekala. Ka ho sebelisa linomoro tsa mehato e fapaneng le paramethara ea sekala (mohlala, sekala = 16th-triplet le metha = 14) u ka etsa mefuta eohle ea "odd" beats. Ho etsa mohlala, 3/4 beat, sebelisa sekala = 16 le metha = 12. Waltz e ntse e tumme haholo, haholo-holo ho batho ba hōlileng - sehlopha seo u se batlang, ho bonahala ho bolokehile ho nahana.

Ho hlophisa boleng ba tekanyo:

• Tšoara Shift + tobetsa Meas (Mohato oa LED 1 - 16 o motala o benyang).
• Tobetsa Mohato 1 - 16 ho khetha nomoro ea mohato. Mohato o benya mmala wa lamunu.
• Tobetsa Kgetha ho netefatsa tlhophiso.

Kopitsa A-Karolo ho ea B-Karolo

Hang ha u se u entse mohlala ka bolelele ba mehato e 16 ka ho fetisisa, u ka kopitsa karolo ena ea "A" ho ea (e ntse e se na letho) "B" -part. Ena ke mokhoa o bonolo oa ho theha mefuta e fapaneng ea lipaterone tse teng.

• Ho kopitsa karolo ea A ho karolo ea B, tobetsa feela konopo ea A/B ho Record Mode.

Boloka Mekhoa

Lipaterone li ka bolokoa ka har'a banka e khethiloeng hajoale.

Ka kopo hlokomela: Ha ho na ts'ebetso ea ho etsolla. Kahoo ka kopo ela hloko 'me u nahane habeli pele u boloka ...

• Tšoara Shift + tobetsa St Patt. Mokhoa oa hona joale o bontšoa ke LED e khanyang e tala. Libaka tsa paterone tse sebelisitsoeng li bonts'oa ka bofubelu bo benyang ba LED. Libakeng tse se nang letho li-LED li lula li le lefifi.
• Tobetsa konopo ea Mohato ho khetha sebaka sa mohlala (LED e khantša bofubelu kamehla).
• Tobetsa Shift ho emisa tšebetso ea lebenkele.
• Tobetsa Kgetha ho netefatsa tshebetso ya lebenkele.

Hlakola Mokhoa oa Hona Joale

• Tšoara Shift + tobetsa Cl Patt. Paterone e sebetsang hajoale e tla hlakoloa.

Ka kopo hlokomela: Ha ho na ts'ebetso ea ho etsolla. Kahoo ka kopo ela hloko 'me u nahane habeli ...

LIEKETSENG MIDI

Likou tse tharo tsa MIDI li sebelisoa ho hokahanya lisebelisoa tsa MIDI le Tanzbär. Li-keyboards tsa MIDI, li-controller, le li-drumpad li lokela ho hokeloa ho MIDI In 1. MIDI In 2 ke haholo-holo ea MIDI synchronization (MIDI clock). Litlhophiso tsa mocha oa MIDI oa Tanzbär li tsitsitse 'me li ke ke tsa fetoloa. Track CV 1 e romela le ho e amohela ka kanale 1, pina CV 2 e romela le ho e amohela ka kanale 2, 'me lipina tsohle tsa meropa li romella le ho li amohela ka kanale 3. Ho amahanya le lisebelisoa tsa kantle ka MIDI oache oache ea MIDI e lula e fetisoa le ho amoheloa. Ha ho li-setting tse ling tse lokelang ho etsoa.

E hokahantsoe le mohloli oa oache oa kantle oa MIDI, Tanzbär e ka qalisoa le ho emisoa ka konopo ea Play. E qala / e emisa hantle ka tlase ho bar e latelang ntle le ho tsoa ho sync.

Sephetho sa mehato ea sequencer joalo ka litaelo tsa lintlha

Lintlha tse hlahisoang li ka lumelloa lefatšeng ka bophara. U tla fumana ts'ebetso ena ho menu ea ho seta.

• Tšoara Shift + tobetsa Setup (Mohato oa 16). Menu ea ho seta ea sebetsa hona joale. Li-LED tse benyang 1 - 10 li bona li-menu tse fumanehang.
• Tobetsa konopo ea Mohato 8. Tlhahiso ea lintlha e lumelletsoe.
• Ho tobetsa Mohato oa 8 hape ho fetola pakeng tsa ho (botala) le ho tima (bofubelu).
• Tobetsa Kgetha ho netefatsa tshebetso.

Ho fumana lintlha tsa MIDI le lebelo la ho letsa liletsa tsa meropa

Mosebetsi oa Drumsound expander

Tanzbär e tlameha ho hlongoa ho MANUAL TRIGGER MODE (Rec/ManTrg LED green) ho sebetsa joalo ka se atolosa molumo oa moropa. Linomoro tsa lintlha tsa MIDI le kanale ea MIDI (ho tloha ho #3 ho ea ho #16) li ka sebelisoa ho liletsa tsa meropa ho sebelisoa ts'ebetso ea "ithuta". Ho qala mohatong oa 3 (BD ​​1), sesebelisoa sa LED se benya ha se emetse molaetsa o kenang oa MIDI. Lethathamo la MIDI, leo joale le fetiselitsoeng Tanzbär, le tla sebelisoa sesebelisoa. Tanzbär e fetohela sesebelisoa se latelang (BD 2). Hang ha lisebelisoa tsohle li behiloe ho MIDI note, Select LED e benya. Tobetsa Kgetha ho tiisa le ho boloka kenyo ya data ebe o kwala tshebetso. Tlohela ts'ebetso ntle le ho boloka data ka ho tobetsa Shift. Tabeng ena, tlhophiso e sebetsa feela ho fihlela Tanzbär e tima.

Ha liletsa tsohle tsa meropa li abeloa lintlha tsa MIDI resp. kanale ea MIDI ka tsela ena, Tanzbär e ka bapaloa e le mojule oa moropa ka ho sebelisa keyboard, sequencer, kapa li-drum pads. Ho Play Mode, o ka bapala meropa e phelang ka mokhoa o hlophisitsoeng.

Rekoto ea Nako ea 'Nete

Ha Roll Record e ntse e sebetsa, lintlha tse kenang tsa MIDI li rekotoa ho tatellano ea Tanzbär. Ka tsela ena o ka rekota lipaterone ka nako ea nnete. Mosebetsi oa Roll Record o hlalositsoe leqepheng la 12.

Romela le ho amohela thotobolo tsa MIDI SysEx

Likahare tsa paterone tsa banka ea hajoale li ka fetisoa joalo ka thotobolo ea MIDI.

• Tšoara Shift + tobetsa Dump (Mohato oa 9) ho qala phetisetso ea ho lahla.

Ho fumana data ea SysEx kamehla hoa khoneha ntle le ho nolofalletsa ts'ebetso efe kapa efe. Haeba data ea SysEx e amoheloa, banka ea hajoale ea mohlala e tla hlakoloa. Haeba SysEx e sa sebetse hantle, likonopo tsohle tsa mehato li tla benya bofubelu. Re u eletsa hore u sebelise lits'ebetso tse latelang tsa phetisetso ea SysEx: MidiOx (Win) le SysEx Librarian (Mac).

Basebelisi ba MidiOx ka kopo elelloa: thotobolo e fetiselitsoeng ho MidiOx e tlameha ho ba le boholo ba 114848 Bytes, ho seng joalo MidiOx e tla bonts'a molaetsa oa phoso.

Molaoli oa MIDI

Tanzbär e fumana lintlha tsa taolo ea MIDI bakeng sa boholo ba mesebetsi le liparamente tsa eona. U tla fumana lenane la balaoli ba MIDI sehlomathisong sa bukana (leqephe la 30). Ho fumana data ea MIDI controller, MIDI channel 10 e lula e sebelisoa.

Latela Shift

Lipina li ka ba micro shifted resp. liehisoa ka likaroloana tsa liboseleise ka ho sebelisa lilaoli tsa MIDI. Sena se ka hlahisa litlamorao tse monate tsa morethetho. Ka kopo sebelisa MIDI controller 89 ho isa ho 104 ho hlophisa pina shif

CV/GATE-INTERFACE / SYNC

Ka lebaka la CV / heke ea eona le sebopeho sa sync, Tanzbär e lumellana le li-vin tse ngatatagli-synthesizer, likhomphutha tsa meropa, le li-sequencers. Tatelano, e hlophisitsoeng ho pina CV 1 le CV 2/3, e fetisoa ka li-sockets tsa Tanzbär's CV/gate.

Lipontšo tsa Heke tse Inverting

Lipontšo tsa heke ea tlhahiso (Heke ea 1 le Heke ea 2) li ka khelosoa ka boikemelo:

• Tšoara Shift + Heke (Mohato oa 14). Mohato oa 1 le Mohato oa 2 o motala o motala.
• Tobetsa Mohato oa 1 kapa Mohato oa 2 ho khelosa matšoao a heke ea pina ea 1 resp. pina ea 2 (LED e khubelu = e khelohileng).
• Tobetsa Kgetha ho netefatsa tshebetso.

Sync/Qala Sockets

Li-sockets tsena li romella kapa li amohela resp oache ea analog. qala lets'oao la ho hokahanya Tanzbär le vintage lik'homphieutha tsa meropa le li-sequencers. Ka kopo hlokomela hore lets'oao la oache le hlahisoang ke Tanzbär le fetisoa ka matla a shuffle a hlophisitsoeng. Tšobotsi e ntle e ikhethang ho ea kamoo re tsebang. Ka lebaka la mabaka a tekheniki, heke, oache, le matshwao a ho qala/ho emisa a na le voltagtekanyo ea 3V. Kahoo ba ka 'na ba se ke ba lumellana le vin tsohletagle mechine.

Sync/Start In le Output

Ts'ebetso ena e etsa qeto ea hore na li-sockets Start/Stop le Clock li sebetsa joalo ka lintho tse kenang kapa tse hlahisoang.

• Tšoara Shift + Sync (Mohato oa 13). Mohato oa 13 o benya botala.
• Tobetsa Mohato oa 13 ho theha li-sockets tsena e le lintho tse kenang kapa tse hlahisoang (red LED = input).
• Tobetsa Kgetha ho netefatsa tshebetso.

Lemoha ka kopo: Haeba li-sockets tsena li hlophisitsoe joalo ka lintho tse kentsoeng, Tanzbär e tla ba karabelo ea synchro-nized. ”lekhoba” mohloling oa oache o kantle. Konopo ea Play e ke ke ea ba le mosebetsi tabeng ena.

Searohano sa oache

Sehlahisoa sa oache ea Tanzbär se na le sekhethoa sa oache. Litlhophiso tsa eona li ka fumaneha ka menu ea Setup. Ho benya ha LED ho tloha ho 1 ho isa ho 10 ho bonts'a mesebetsi ea eona e nyane.

• Tšoara Shift + tobetsa Setup (Mohato oa 16). The Setup menu ya butswe. Ho benya ha LED 1 ho isa ho 10 ho bonts'a mesebetsi e nyane.
• Tobetsa Mohato 5. Tshebetso e toggles lipakeng tsa:
  • "divider off" = botala ba LED (tekanyo ea nako = liboseleise tse 24 / 1/4 note / DIN-sync)
  • "divider on" = LED e khubelu (boleng ba divider = boleng bo khethiloeng ba sekala;
• Tobetsa Kgetha ho netefatsa tshebetso.

LIEKETSENG MOSEBETSI

Lenaneo la Setupo le fumaneha "tlas'a" konopo ea Mohato oa 16. Mona u tla fumana mesebetsi e meng ea ho theha Tanzbär ea hau. Tse ling tsa tsona u se u li tseba, tse ling li tla hlalosoa mona.

Ho bula menu ea Setup:

• Tšoara Shift + tobetsa Setup (Mohato oa 16). The Setup menu ya butswe. Ho benya ha LED 1 ho isa ho 10 ho bonts'a mesebetsi e nyane.

Ho khetha mesebetsi ea Setup:

• Tobetsa likonopo tsa Mohato 1 - 10. Lebone la LED le tsamaisanang le benya, le bonts'ang ts'ebetso ea ho seta e nolofalitsoeng.

Ho kenya boleng:

• Tobetsa konopo ea Mohato o benyang. Ts'ebetso e fetoha lipakeng tsa litekanyetso tse tharo tse fapaneng, tse bonts'itsoeng ke LED = tima, e khubelu kapa e tala.

Ho hlakola tšebetso:

• Tobetsa Shift.

Ho netefatsa ts'ebetso:

• Tobetsa konopo ea ho benya. Boleng bo bolokiloe mme menu ea Setup e koetsoe.

Lisebelisoa tse latelang tsa Setupo lia fumaneha:

• Mohato oa 1: Midi Trigger Ithute
  • Ka kopo sheba leqephe la 24.
• Mohato oa 2: Ho lokisa synthesizer ea ka hare
  • Ha ts'ebetso ena e nolofalitsoe, synthesizer e ka hare e bapala molumo o tsitsitseng ka molumo oa 440 Hz. U ka e fetola u sebelisa knob ea Data. Tokiso e ama mantsoe ka bobeli (lello le base).
• Mohato konopo 3: Lead Synth on/off
  • Thibela synthesizer e ka hare, mohlala, ha u sebelisa pina ea CV / Gate 1 ho laola li-synthesizer tsa kantle.
• Mohato konopo 4: Bass Synth on/off
  • Tlosa synthesizer ea bass e ka hare, mohlala, ha u sebelisa pina ea CV/Gate 2/3 ho laola li-synthesizer tsa kantle.
• Mohato konopo 5: Sync Clock Divider
  • Khokahanya sekhethoa sa oache:
    • LED e tima = karohano e holofetse (li-ticks tse 24 ka ntlha ea 1/4 = sync ea DIN),
    • LED ho = Scale (16th, 8th triplets, 32nd joalo-joalo).
• Mohato oa 6: Tlosa Sehlopha
  • Ts'ebetso ena e amana le ts'ebetso e sa bueng ho Play Mode. Ha e sebetsa, meropa ka bobeli ea bass ea tima hang ha u khutsisa e 'ngoe ea eona.
    • LED e tima = tshebetso e tima
    • khubelu = BD 1 e khutsisa BD 2
    • tala = BD 2 e khutsisa BD 1
• Mohato oa 7: Hlakola Paterone ea hajoale
  • Tobetsa Mohato oa 7 habeli ho hlakola banka ea mohlala e sebetsang hajoale.
    • Hlokomela, ha ho na ts'ebetso ea ho etsolla!
• Mohato oa 8: MIDI-note send on/off
  • Sequencer e fetisetsa lintlha tsa MIDI lipineng tsohle.
• Mohato oa 9: Qala/Emisa Impulse/Boemo
  • Ts'ebetso e fetoha lipakeng
    • "impulse" = LED e khubelu (mohlala, Urzwerg, SEQ-01/02) le
    • "level" = LED e tala (mohlala TR-808, Doepfer).
• Bohato ba konopo ea 10: Reset Fektheri
  • E seta bocha Tanzbär ho li-setting tsa eona tsa kamehla tsa feme. Taba ea pele, konopo ea Mohato e benya botala, tobetsa
• Mohato oa 10 hape ho netefatsa ts'ebetso. Tobetsa Khetha ho boloka litlhophiso tsa fektheri ka ho sa feleng

Ts'ebetso ena e ama feela litlhophiso tsa lefats'e, eseng mohopolo oa mohlala. Mekhoa ea basebelisi e ke ke ea ngoloa kapa ea hlakoloa. Haeba u lakatsa ho kenya lipaterone tsa feme hape, u tlameha ho li fetisetsa ka MIDI-lahlela ho Tanzbär. Mekhoa ea feme e ka khoasolloa ho tsoa ho MFB websebaka.

HLOMELO

Phethahatso ea MIDI

Likabelo tsa Molaoli oa MIDI

MFB – Ingenieurbüro Manfred Fricke Neue Str. 13 14163 Berlin, Jeremane

• www.mfberlin.de

Ho kopitsa, ho aba kapa tšebeliso efe kapa efe ea khoebo e thibetsoe mme e hloka tumello e ngotsoeng ke moetsi. Litlhaloso li ka fetoha ntle le tsebiso. Leha litaba tsa bukana ena ea beng li hlahlobiloe ka botlalo bakeng sa liphoso, MFB e ke ke ea tiisa hore ha e na liphoso hohle. MFB e ke ke ea jara boikarabello bakeng sa tlhahisoleseling efe kapa efe e khelosang kapa e fosahetseng ka har'a bukana ena.

Litokomane / Lisebelisoa

Mochine oa Drum oa MFB MFB-Tanzbar Analog [pdf] Bukana ea Mosebelisi Mochini oa Drum oa MFB-Tanzbar, MFB-Tanzbar, Mochini oa Drum oa Analog, Mochini oa Drum, Mochini

Litšupiso

• Bukana ea Mosebelisi