Buka ea Tataiso ea Lipontšo tsa Sensor-Tech SS4L

Lipontšo tsa mantlha ke tse 2 tsa Lehae (tse khubelu & tse tala) le tse Hole (tse mosehla le tse tala). Lets'oao le Hole le kentsoe pele ho lets'oao la lapeng ho fana ka temoso ea pele ho mokhanni oa hore na lets'oao le latelang ke eng, kahoo haeba Lets'oao le Hole le le tala o tseba hore lets'oao le latelang le lona le letala, empa haeba le bonts'a mosehla o tseba e latelang. pontšo e tla ba khubelu. Ho boetse ho na le likarolo tse 3 tsa mabone a mosehla a nang le mabone a mosehla hammoho le Red & Green tse bitsoang Home-Distant, 'me meleng e meholo ea lebelo le holimo ho na le likarolo tse 4 tsa mabone a kantle ho naha a nang le mabone a bofubelu, a matala le a 2 a hole a mosehla. fana ka pontšo ea pejana ea matšoao a 2 a latelang ho mokhanni oa terene. Boholo ba liporo tsa 'nete' li hlile li sebelisa lipontšo tsa othomathike 'me Lipontšo tsa Sensor li sebetsa ka tsela e ts'oanang. Ha re khone ho fana ka lintlha leha e le life tsa 'nete tsa moralo le ts'ebetso ea matšoao mona, empa ho na le libuka tse ngata tse ntle le weblibaka (mohlala www.signalbox.org) e inehetseng tabeng. Litšoantšo tse tataisong ena li bonts'a haholo-holo likarolo tse 4 tsa Sensor Signals, empa melao-motheo e tšoanang e sebetsa ho mefuta eohle ea matšoao a Terene-Tech.

Taba ea pele, o hloka ho khetha sebaka seo u leng ho sona, eseng mothinyeng o nchocho hobane sensor ea optical e hloka ho "bona" ​​terene e kaholimo ho eona, 'me li-wheelbase tse telele joalo ka likoetliso li ka otla lets'oao kapa tsa fosa sensor ha e le mothiong. E latelang o hloka ho fana ka Sensor Signal ka matla:

Sliding Signal pina e loketseng meralo ea DCC feela

Meetso ea DCC e na le matla lipineng ka linako tsohle, ka hona, Lipontšo tsa Sensor li ka nka matla a tsona ka kotloloho ho tloha pina ka ho thellela menoana ho li-slots tseo pina e 'ngoe e nang le tsona bakeng sa likarolo tsa matla. Hlokomela hore sena se loketse feela pina e itseng e kang Hornby le Bachmann pina e tsitsitseng mme khokahanyo e ntle haholo e tlameha ho etsoa ka linako tsohle bakeng sa ts'ebetso e ka tšeptjoang. Pina e 'ngoe ea Peko le eona e na le li-slots empa li pharalletse haholo 'me li tla hloka ho paka ho etsa khokahano e tiileng e tšepahalang. Haeba ho na le lipelaelo leha e le life re khothaletsa ho kenya mohala ka ho toba ho letšoao - bona ka tlase.

Ho kenya lets'oao pina, fumana li-slots tsa matla ka har'a pina lipakeng tsa liporo le batho ba robalang, 'me, u tšoere lets'oao la BASE, ikamahanya ka hloko 'me u kenye menoana ea ho ikopanya le lets'oao ka har'a li-slots ho fihlela lets'oao le emisa - sensor e lokela. ho ba haufi le empa u se ke ua ama seporo! Sena se kanna sa lekana hantle, kahoo ela hloko haholo!

Kamehla tšoara 'me u sutumelle lets'oao ka motheo oa lona, ​​LE KA mohla ka poso kapa hlooho!

Wiring Signal

U sebelisa lithapo tse bohale tsa terata kapa li-cutters tsa mohlala, khaola menoana ka hloko hantle haufi le mela e nang le matheba a tšoailoeng - - - - setsing sa potoloho ea matšoao, u hlokomele haholo hore u se ke ua ama kapa ua senya sensor e nyane e ntšo kapa efe kapa efe ea eona. lithapo kaha sena se tla baka tšenyo e sa feleng ho lets'oao la sensor! Ka hloko kenya lithapo tse 2 tse tšesaane tse kentsoeng pele ka har'a masoba a tšoailoeng PP holim'a setsi sa potoloho le setšoantšo, ho etsa bonnete ba hore likhoele kapa litelu tsa terata ha li ame sehokelo kapa karolo efe kapa efe! Litaelong tsa DC li hokela lithapo tsena ho phepelo ea 12-16V DC 'me ho litlhophiso tsa DCC li li hokela ho liporo tse haufi, DCC Bus bar kapa li lebise ho sephetho sa taolo ea DCC.

Ho sebelisa lets'oao la sensor ho eona

Hang ha motlakase o bulela lets'oao la hau le lokela ho khantša botala. Haeba e sa bonese ho hang, hlahloba likhokahano tsa motlakase hantle - sheba leqephe le fetileng. Ho etsa teko ya ho sututsa kolotsana kapa mokwetsi ho feta sesupo. Sensor e lokela ho e lemoha 'me lets'oao le lokela ho fetoha ho tloha ho botala ho ea bofubelu (kapa ho ea mosehla lets'oao le hole). Metsotsoana e 'maloa ka mor'a hore terene e fete letšoao e tla khutlela ho botala (ka mosehla haeba e le lets'oao la mofuta oa hae-hole). Hlokomela hore lets'oao le tla fetohela ho botala feela ka mor'a hore le se bone terene holim'a lona ka metsotsoana e mengata, kahoo haeba le na le terene e telele le tla lula le le kotsing ha feela terene e ntse e tsamaea holim'a eona. Letšoao le sebelisoang ka bo lona le ka sebetsa ka tsela ena feela hobane ha le tsebe hore na terene e hole hakae, empa haeba Lipontšo tse ngata tsa Sensor li hokahane hammoho lets'oao la pele le tla lula le le kotsing ho fihlela terene e tlositse boloko bo latelang, joalo-joalo. ho ea ka likarolo tsa block tse sirelelitsoeng ke matšoao a mang a sensor - bona leqephe la 4.

 Phetolelo ea letsoho ea Letšoao le le leng la Sensor

Phetoho ea ho etsisa ke mokhoa o bonolo oa ho feta Sensor Signal hape e fana ka melemo e meng e kang LED e bontšang 'mala oa letšoao le LED e' ngoe e khantšang ha terene e feta pontšo, hammoho le ho laola letšoao la tsela joalo-joalo Wiring e bonolo hape le eona terata e le 'ngoe feela ho tloha lets'oao ho ea ho switch ea mimic mme e sebetsa ho litlhophiso tsa DC le DCC ka bobeli. (lintlha leqepheng le latelang)

Ho sebelisa Lipontšo tsa Sensor tse ngata

Lipontšo tsa Sensor li hlile li tla ho tsona ha u hokahanya tse 'maloa hammoho hobane kaofela li tatellano e le sistimi e felletseng ea block block ka bo eona! Ex ea ronaampLes show 4 likarolo empa mefuta e fapaneng e ka kopanngoa 'me kaofela e tla sebetsa hammoho, ho kenyelletsa le mats'oao a hole feela a bontšang mosehla ha lets'oao le latelang le le khubelu. ExampLe ka tlase e bonts'a mats'oao a 4 a hokahantsoeng, leha ts'ebetsong o ka tsamaisa hoo e batlang e le palo efe kapa efe ea matšoao a hokahantsoeng ka tsela ena ha feela o na le matla a lekaneng ho a fana kaofela (lets'oao le leng le le leng le hloka hoo e ka bang 0.05A).

Phetolelo ea matsoho ea Lipontšo tsa Sensor tse ngata

Lipontšo tse ngata tsa Sensor li ka hlakoloa ho bonts'a ho emisa / tlhokomeliso ka tsela e tšoanang le eo lets'oao le le leng le ka khonang, 'me hobane li hokahane li boetse li laola matšoao afe kapa afe a hole a ka pel'a tsona ho bonts'a mosehla kapa mosehla o habeli joalo-joalo.

Lipontšo Tsa Tsela

Lipontšo tsa Sensor li fumaneha hape ka matšoao a tsela ea 'Masiba' le 'Theatre' tse ka buloang le ho tima ka DCC kapa Mimic Switch joalo ka ha ho bonts'itsoe hamorao. Matšoao a litsela a eletsa mokhanni oa terene hore na o tsamaea ka tsela efe kapa sethala, 'me hangata a laeloa ke hore na lintlha li behiloe joang.

Letšoao la tsela ea Theatre ka lets'oao la hau le ka hlophisoa ho bonts'a hoo e batlang e le sebopeho se le seng kapa letšoao la khetho ea hau; Haeba u phahamisa sekoahelo sa Theatre u tla bona hore ho na le lisekoere tsa masoba a manyane a 25 (5 x 5) a khantšitsoeng ka morao ho sebelisoa lebone le lenyenyane la LED le hahiloeng ka har'a lets'oao. Ka hloko pata masoba ao u sa batleng ho a khantša ka morao u sebelisa likhoele tse moqotetsane tsa tepi e sirelelitsoeng e ntšo kapa Blu Tack, Black Tack joalo-joalo ebe u kenya hood. Ha tsela e kentsoe, leseli le tla khanya ka har'a masoba a koahetseng 'me le bonts'e sebopeho sa hau. U ka sebelisa pentšele litempeleng tse se nang letho tse ka tlase ho etsa qeto ea hore na ke masoba afe ao u lokelang ho a thiba ho iketsetsa sebopeho kapa letšoao.

Sena se bitsoa 'dot matrix display' 'me ke hore na theatre le matšoao a mang a etsoa seporong sa 'nete.

Taolo ea DCC ea Letšoao la Tsela ea Lipontšo

Lipontšo tsa tsela ea masiba kapa ea Theatre li ka buleha kapa tsa tima 'me kaofela li laoloa ka tsela e ts'oanang, joalo ka taolo ea matšoao a mantlha. Haeba u laola lintlha tsa hau u sebelisa DCC u ka fa tsela aterese e ts'oanang e le hore e bonese ka bo eona ha lintlha li behiloe tseleng e khethiloeng. Ho seta aterese ea tsela, seta aterese eo u e khethileng ho molaoli oa hau, ebe u tobetsa "Ithute mabitso" hammoho habeli ho fihlela masiba kapa theater e benya. Ebe u romella ▹ / ” Tataiso kapa taelo ea 1/2 ho tsoa ho molaoli oa hau ho seta aterese eo sesupo sa tsela ea hau se tla buleha. (NB: haeba u batla hore tsela e lumellane le ts'ebetso ea ntlha, etsa bonnete ba hore taelo e tšoanang e sebelisitsoeng e boetse e beha ntlha tseleng eo). Lintlha tse ling mabapi le leqephe la taolo la DCC 6Hlokomela hore lets'oao le tima sesupo sa tsela ka bo eona haeba lets'oao le le Lefubelu.

Ho Sebelisa Liphetoho tsa Mimic tse nang le Lipontšo tsa Sensor

Ho etsisa Wiring le Mesebetsi

FETOHA MESEBETSI:

1. Letšoao la tsela (haeba le kentsoe lets'oao)
2. Ka ho iketsa
3. Ho fetisoa ka letsoho - ho emisa / tlhokomeliso

MAKHOPO:

Ho sebelisa DCC ho laola Letšoao la Sensor

Ntle le ho sebelisa sesebelisoa sa ho etsisa u ka sebelisa DCC ho fetisa lets'oao le / kapa ho laola sesupo sa tsela. Lihlahisoa tsa Terene-Tech li sebelisa sistimi e ikhethang e bitsoang One-Touch DCC ho theha sesebelisoa leha e le sefe sa DCC habonolo - hlokomela hore u tlameha ho seta molaoli ho mokhoa oa taolo oa DCC Accessory, eseng mokhoa oa loco.

Ho seta lets'oao la hau bakeng sa phetisetso ea letsoho ea DCC, sebelisa sehokelo se sekhuts'oanyane sa terata e kentsoeng ho ama hakhutšoanyane 'Ithute' mabitso a mabeli a patiloeng (sheba setšoantšo) ho fihlela mabone a bonesa, ebe u romella Direction ▹ / ” kapa 1 / 2 ( ho ipapisitse le sebopeho sa molaoli oa hau) atereseng ea sesebelisoa eo u batlang ho e sebelisa ho hlakola Letšoao la Sensor ea hau. Letšoao le tla emisa ho bonesa 'me lets'oao la hau la Automatic joale le ka hlakoloa ka nako efe kapa efe u sebelisa taelo le aterese eo u e khethileng - e fetole lipakeng tsa override / automatic u sebelisa ▹ / ” kapa 1 / 2 taelo atereseng ea hau. Lipontšo tse ling tsa Sensor tse hokahantsoeng le lets'oao lena le tsona li tla sebetsa ka nepo, joalo ka mohlalaample a hole e tla bonts'a mosehla ha lets'oao le latelang le le khubelu. Etsa bonnete ba hore u khetha aterese e sa sebelisoeng ke eng kapa eng e 'ngoe mohahong oa hau!
Ho theha taolo ea DCC ea Lesiba kapa Letšoao la Theatre ho Letšoao la Sensor

Ho seta lets'oao ka Route Indicator, sebelisa sehokelo se sekhuts'oane sa terata e kentsoeng ho ama hakhutšoanyane 'Ithute' mabitso a mabeli a patiloeng (sheba setšoantšo) ho fihlela mabone a bonesa, ebe o a ama hape 'me sesupo sa Route se lokela ho bonesa. Romela Tataiso ▹ / ” kapa 1 / 2 (ho ipapisitse le molaoli oa hau) atereseng ea sesebelisoa seo u batlang ho se sebelisa ho bulela Route. Tsela e tla emisa ho benya 'me joale e tla khanya ka ho sebelisa taelo le aterese eo u e khethileng. U ka sebelisa aterese e tšoanang le sebaka se laoloang ke DCC e le hore se fetohe ka ntlha - hlokomela hore letšoao la tsela le lula le khantša ka tsela e tšoanang ▹ / ” kapa 1 / 2 eo u neng u tloaetse ho e theha, kahoo sebelisa se tšoanang le ntlha ho etsa hore di sebetse mmoho.

Ho hlakisa lets'oao la hau

Letšoao le fanoa ka sprue ea likarolo tsa polasetiki hore u kenye lintlha tsa boikhethelo joalo ka lere, litšepe, mohala le boto ea sebaka haeba u lakatsa (joalo ka ha ho bonts'itsoe litšoantšong tse 'maloa). Likarolo tsena li nyane haholo ebile lia fokola, kahoo re khothaletsa ho sebelisa tse latelang ho li tlosa le ho li lekana:

Re khothaletsa hore pele u tlose lere le likarolo tse kholo ka ho seha litšehetso tse tenya pele - ka mor'a ho li khaola li lokela ho arohana le likarolo tse ling ka ho 'rekisa' ka bonolo 'me u ka fokotsa litšehetso tse ntle. Likarolo li ka khaoloa litšehetsong ho sebelisoa thipa holim'a 'mete oa ho seha kapa ka ho sebelisa li-seha tse nepahetseng - li fumaneha mabenkeleng a mohlala kapa www.dcpexpress.com U tla boela u fumane hore lisebelisoa tsa nko kapa li-tweezers li na le thuso bakeng sa likarolo tse loketseng. Likarolo tse ling li ka khomaretsoa sebakeng ka ho sebelisa likhomaretsi tsa mohlala tse kang Liquid poly kapa cyanoacrylate 'superglue' joalo-joalo.

U ka sebelisa Boto ea Sebaka (letšoao le lenyenyane la lisekoere) ho bonts'a aterese ea DCC ea lets'oao ka ho seha le ho hokela nomoro ho tsoa tafoleng e hatisitsoeng ka thoko. Letšoao le tlase le nang le bar e tšekaletseng ke letšoao la Semi-automatic.

O ka boemo ba leholimo kapa oa penta lets'oao mme oa eketsa lisebelisoa tsa ho hasanya kapa ballast joalo-joalo ho potoloha setsi empa u hlokomele hore u se ke ua koahela Sensor, Ithute kapa u ikopanye le menoana 'me le ka mohla u se ke ua lumella mokelikeli hore o kene motheong oa letšoao kaha sena se na le lisebelisoa tsa elektroniki tse tla senyeha ka ho sa feleng. ka mongobo

Ho batle phoso

• Ha e tsamaisoa, lebone le leng la mabone le tlameha ho lula le khantšitsoe 'me le se ke la thothomela. Haeba ho se joalo, 'me li-locos li matha ka mokhoa o nepahetseng ho hlahloba likhokahano tsa matla a pontšo - haeba u sebelisa menoana ea ho ikopanya le matšoao bakeng sa ho hlahloba hore na li hloekile li hloekile 'me li kentsoe ka thata pakeng tsa motho ea robalang pina le seporo - hloekile ha ho hlokahala kapa u nahane ka ho kenya mohala oa mohala ho e-na le ho sebelisa slide ka menoana. Lihokelo tsa matla ho Sensor e 'ngoe le e' ngoe e hokahaneng hammoho e tlameha ho ba e ntle haholo le e tsitsitseng ho netefatsa ts'ebetso e tšepahalang.
• Ha o matlafatsa Sensor Signal ea hau ho tsoa ho DC e tlameha ho ba phepelo ea Smooth DC lipakeng tsa 12 le 16 volts DC maximum - re ka khothaletsa pakete ea motlakase ea Gaugemaster GMC-WM4 e le e loketseng, ho ba 12 volt Smooth & Regulated DC @1.25A.
• Haeba lets'oao le lula 'mala o le mong, le sa fetohe ha terene e ntse e feta, hlahloba hore na lets'oao le sutumelletsoa kahare ho batho ba robetseng mme sensor e haufi le seporo (empa HA E ama!) le hore ha ho na leseli le khanyang kapa letsatsi le chabileng ka kotloloho ho sensor ho e thibela ho sebetsa. Ha re khothaletse ho kenya Lipontšo tsa Sensor holim'a li-curve hobane setoko se selelele se ka fetoa ke sensor ho li-curve tse kantle kapa sa thula lets'oao ho li-curve tse ka hare.
• Haeba lets'oao le lula le le khubelu (kapa le le mosehla lets'oao le hole) hlahloba hore ha o so romele taelo e fetelletseng ka phoso - hlokomela hore Lipontšo tsa Sensor li behiloe atereseng ea Test DCC fekthering mme ena e kanna ea ba aterese e ts'oanang le ntho e ngoe sebopehong sa hau. , kahoo haeba u belaela, e fane ka aterese ea hao e ikhethang le haeba u sa ikemisetsa ho sebelisa DCC override – sheba leqephe la 6
• Haeba ho utloa ho sa tšepahale ho literene tse ling, u ka eketsa leibole e tšoeu kapa pente e tšoeu ka tlas'a terene ho ntlafatsa ponaletso, empa e lokela ho sebetsa le thepa e ngata. Se ke oa kolobisa lets'oao kapa ua koahela sensor ka pente kapa lintho tse ling tse ntle.
• Haeba lets'oao la hau le sa arabele DCC, hlahloba habeli hore molaoli oa hau o maemong a li-accessory (eseng aterese ea kamehla ea literene) ho theha le ho sebetsa (sena se tla hlalosoa litaelong tsa balaoli ba hau).
• Haeba mehato ena e hloleha, ka kopo ikopanye le morekisi oa hau kapa re oele ka kotloloho: www.train-tech.com sales@dcpmicro.com 01953 457800

Koetlisa Tech ho fetaview –

• Li-signal kits - OO / HO theko e tlaase e bonolo ho etsa lipontšo bakeng sa Lipontšo tsa Sensor tsa DC
  • pontso e bonolo ea block block
  • DCC kapa DC Smart Lights
  • litlamorao tse nyane tse hahelletsoeng
  • DC/DCC - lithapo tse peli feela: Arc welding
• Koloi ea maemo a tšohanyetso
• TV
• Phello ea mollo
• Party disco Automatic Coach Lights - tshisinyo - ha ho na pickups kapa wiring: Old Mofuthu White
• Bosoeu ba Kajeno bo Phodileng
• Leseli la Mohatla
• Spark Arc Automatic Tail Lights
  • tshisinyo
  • bonolo, ha ho lithapo
  • lebone la LED:
• Oli ea lelakabe le benyang lamp • Ho Benya ha Kajeno
• Leseli la kamehla la Track Tester
  • kapele e leka DC polarity kapa DCC
  • N-TT-HO-OO SFX+ Li-capsules tsa molumo
  • ha ho likhoele! - literene tsa 'nete - DC kapa DCC Steam
• Disele
• DMU
• Mokoetlisi oa bapalami
• Shunted stock Buffer Light
  • qoelisa mabone bakeng sa ho emisa ho buffer
  • N kapa OO - DC/DCC LFX Lighting liphello
  • DC/DCC – screw terminals
  • ka li-LED: Lebone la Lehae le Lebenkeleng
• Welding
• Liphello Tse Khanyang
• Mabone a Sephethephethe sa Mollo
  • e kopane ka botlalo - ikopanye feela le DC kapa DCC Level Crossings - e kopane
  • Liphetolelo tsa N & OO
  • DC / DCC DCC matšoao a kentsoeng - thellela pina
  • tlhophiso e bonolo ea touch one:
• 2 ntlha
• 3 ntlha
• 4 ntlha
• Hlooho tse peli
• Masiba
• Theatre DCC Point Controllers - ho bonolo ho hokela
• seta e le 'ngoe ea li-DCC Signal Controllers
• ho bonolo ho hokela – seta e le nngwe ya ho thetsa Bakeng sa matshwao a mabone a Mmala
• Dipole Semaphore e tšoaea li-LED, mabokose a betri, lihokelo, li-switches, lisebelisoa….

www.Train-Tech.com

Bona rona websebaka, lebenkele la heno la mohlala kapa ikopanye le rona bakeng sa bukana ea mahala ea mebala ea DCP Micro developments, Bryon Court, Bow Street, Great Ellingham, NR17 1JB, UK Telephone 01953 457800
• imeile sales@dcpmicro.com
• www.dcpexpress.com

Litokomane / Lisebelisoa

Terene-Tech SS4L Sensor Lipontšo [pdf] Buka ea Taelo Lipontšo tsa Sensor tsa SS4L, SS4L, Lipontšo tsa Sensor, Lipontšo

Litšupiso

• Bukana ea Mosebelisi