Abubuwan da ke ciki boye
1 Tektronix AWG5200 Series Masu Haɓaka Waveform Generators
2 Muhimman bayanan aminci
3 Gabatarwa
4 Ka'idar aiki
5 Kulawa
6 Daidaitawa
7 Abubuwan da za a iya maye gurbinsu
8 Module sabis
9 Abubuwan da za a iya maye gurbinsu - na waje
10 Takardu / Albarkatu
10.1 Magana
11 Labarai masu alaka

Tektronix AWG5200 Series Masu Haɓaka Waveform Generators

Muhimman bayanan aminci

  • Wannan littafin yana ƙunshe da bayanai da gargaɗi waɗanda dole ne mai amfani ya bi su don aiki lafiya da kiyaye samfur ɗin cikin aminci.
  • Don yin sabis na aminci akan wannan samfur, duba taƙaitaccen aminci na Sabis wanda ya bi taƙaitaccen aminci.

Babban bayanin taƙaitaccen tsaro

  • Yi amfani da samfurin kawai kamar yadda aka ƙayyade. Review waɗannan matakan tsaro masu zuwa don gujewa rauni da hana lalacewar wannan samfur ko kowane samfuran da ke da alaƙa da shi. A hankali karanta duk umarnin. Riƙe waɗannan umarnin don tunani na gaba.
  • Za'a yi amfani da wannan samfurin daidai da lambobin gida da na ƙasa.
  • Don ingantaccen aiki mai lafiya na samfur, yana da mahimmanci ku bi ƙa'idodin aminci gabaɗaya da aka yarda da kariyar tsaro da aka ƙayyade a cikin wannan littafin.
  • An ƙera samfurin don amfani da ƙwararrun ma'aikata kawai.
  • Kwararrun ma’aikata ne kawai waɗanda ke sane da haɗarin da ke tattare da su ya kamata su cire murfin don gyara, gyara, ko daidaitawa.
  • Kafin amfani, koyaushe bincika samfurin tare da sanannun tushe don tabbatar da cewa yana aiki daidai.
  • Ba'a yi nufin wannan samfurin don gano volara mai haɗari batage.
  • Yi amfani da kayan kariya na sirri don hana girgiza da raunin fashewar arc inda ake fallasa masu haɗari masu haɗari.
  • Yayin amfani da wannan samfur, ƙila ku buƙaci samun dama ga wasu sassan babban tsarin. Karanta sassan tsaro na sauran litattafan bayanai don gargadi da gargaɗi da suka shafi tsarin aiki.
  • Lokacin haɗa wannan kayan aiki cikin tsarin, amincin wannan tsarin shine alhakin mai haɗa tsarin.

Don gujewa wuta ko rauni na mutum

  • Yi amfani da igiyar wutar lantarki da ta dace: Yi amfani kawai da igiyar wutan da aka kayyade don wannan samfur kuma an tabbatar da ita don ƙasar amfani.
  • Yi amfani da igiyar wutar lantarki da ta dace:  Yi amfani da igiyar wutar lantarki da aka ƙayyade don wannan samfurin kuma an tabbatar da ita don ƙasar amfani. Kar a yi amfani da igiyar wutar lantarki da aka bayar don wasu samfuran.
  • Yi amfani da daidai voltage saitin: Kafin amfani da iko, tabbatar cewa mai zaɓin layi yana cikin madaidaicin wurin da ake amfani da tushen.
  • Gyara samfurin : Wannan samfurin yana ƙasa ta hanyar madubin ƙasa na igiyar wutar lantarki. Don guje wa girgiza wutar lantarki, dole ne a haɗa madubin da ke ƙasa da ƙasa. Kafin yin haɗi zuwa shigarwar ko tashoshi na samfur, tabbatar da cewa samfurin yana ƙasa da kyau. Kar a kashe haɗin ƙasan igiyar wutar lantarki.
  • Gyara samfurin  : Wannan samfurin yana ƙasa a kaikaice ta hanyar madubin ƙasa na babban igiyar wutar lantarki. Don guje wa girgiza wutar lantarki, dole ne a haɗa madubin da ke ƙasa da ƙasa. Kafin yin haɗi zuwa shigarwar ko tashoshi na samfur, tabbatar da cewa samfurin yana ƙasa da kyau. Kar a kashe haɗin ƙasan igiyar wutar lantarki.
  • Cire haɗin wuta:  Maɓallin wuta yana cire haɗin samfur daga tushen wutar lantarki. Duba umarnin don wurin. Kada a sanya kayan aiki don yana da wuya a cire haɗin wutar lantarki; dole ne ya kasance mai isa ga mai amfani a kowane lokaci don ba da damar cire haɗin kai da sauri idan an buƙata.
  • Cire haɗin wuta: Igiyar wutar tana cire samfurin daga madogarar wutar. Duba umarnin wuri. Kada a sanya kayan aiki don yana da wuyar sarrafa igiyar wutar; dole ne ya kasance mai amfani ga mai amfani a kowane lokaci don ba da damar cire haɗin sauri idan an buƙata.
  • Yi amfani da adaftar AC mai dacewa: Yi amfani da adaftan AC da aka ƙayyade don wannan samfur.
  • Haɗa kuma cire haɗin kai yadda ya kamata: Kada a haɗa ko cire haɗin bincike ko jagorar gwaji yayin da aka haɗa su da voltage source.Yi amfani da insulated kawai voltage bincike, jagororin gwaji, da adaftan da aka kawo samfurin, ko Tektronix ya nuna ya dace da samfurin.
  • Kula da duk ƙimar tasha: Don gujewa haɗarin wuta ko haɗarin girgizawa, kiyaye duk ƙimantawa da alamomi akan samfurin. Tuntuɓi littafin samfur don ƙarin bayanan kimantawa kafin yin haɗi zuwa samfurin. Kada ku wuce ƙimar Nau'in aunawa (CAT) da ƙimatage ko ƙimar yanzu na mafi ƙanƙanta ɗayan ɓangarorin samfur, bincike, ko kayan haɗi. Yi amfani da taka tsantsan lokacin amfani da gwajin gwajin 1: 1 saboda ƙarar ƙarartage ana watsa shi kai tsaye zuwa samfurin.
  • Kula da duk ƙimar tasha: Don guje wa haɗari ko haɗari, lura da duk ƙima da alamomi akan samfurin. Tuntuɓi littafin samfurin don ƙarin bayanin kima kafin yin haɗi zuwa samfurin. Kar a yi amfani da yuwuwar zuwa kowane tasha, gami da na gama gari, wanda ya zarce matsakaicin ƙimar wannan tasha. Kar a shawagi tasha gama gari sama da ƙimar voltage na wannan tasha.Ba'a ƙididdige ma'auni akan wannan samfurin don haɗin kai zuwa manyan hanyoyin sadarwa ko Sashe na II, III, ko IV.
  • Kada ku yi aiki ba tare da sutura ba: Kada kuyi aiki da wannan samfur tare da cire murfi ko bangarori, ko kuma a buɗe akwati. Hadari voltage fallasa yana yiwuwa.
  • A guji fallasa da'ira:  Kada ku taɓa haɗin da aka fallasa da abubuwan haɗin lokacin ikon yana nan.
  • Kar a yi aiki tare da gazawar da ake zargi: Idan kuna zargin cewa akwai lalacewa ga wannan samfurin, ƙwararrun ma'aikatan sabis su duba shi. Kashe samfurin idan ya lalace. Kada kayi amfani da samfurin idan ya lalace ko yayi aiki da kuskure. Idan kuna shakka game da amincin samfurin, kashe shi kuma cire haɗin wutar lantarki. Yi alama a fili samfurin don hana ci gaba da aikinsa. Kafin amfani, duba voltage bincike, gwajin jagora, da na'urorin haɗi don lalacewar inji da maye gurbin lokacin lalacewa. Kada kayi amfani da bincike ko gwajin jagora idan sun lalace, idan akwai fallasa ƙarfe, ko kuma idan alamar lalacewa ta nuna.Bincika wajen samfurin kafin amfani da shi. Nemo tsaga ko ɓarna. Yi amfani da ƙayyadaddun sassan maye kawai.
  • Sauya batura yadda ya kamata: Maye gurbin batura kawai tare da ƙayyadadden nau'i da ƙima.
  • Yi cajin batura yadda ya kamata: Yi cajin baturi don shawarar sake zagayowar caji kawai.
  • Yi amfani da fuse mai kyau: Yi amfani da nau'in fuse kawai da ƙimar da aka ƙayyade don wannan samfurin.
  • Saka kariya ta ido: Saka kariyar ido idan an sami fallasa ga haskoki masu ƙarfi ko hasken laser.
  • Kada kuyi aiki cikin rigar/damp yanayi:Ku sani cewa kuzarin jiki na iya faruwa idan an motsa naúrar daga sanyi zuwa yanayin ɗumi.
  • Kada kayi aiki a cikin yanayi mai fashewa
  • Tsaftace saman samfurin kuma bushe:Cire siginar shigarwa kafin tsaftace samfurin.
  • Samar da iska mai kyau: Koma zuwa umarnin shigarwa a cikin jagorar don cikakkun bayanai game da shigar da samfurin don haka yana da isasshen iska. Ana ba da ramuka da buɗewa don samun iska kuma bai kamata a rufe ko kuma a toshe shi ba. Kar a tura abubuwa cikin kowane mabuɗin.
  • Samar da yanayin aiki mai aminci: Koyaushe sanya samfurin a wuri mai dacewa don viewnuni da kuma nuna alama. Guji rashin dacewa ko tsawaita amfani da madannai, masu nuni, da maɓalli. Amfani mara kyau ko tsawaita madannai ko amfani na iya haifar da mummunan rauni. Tabbatar cewa yankin aikinku ya cika ka'idojin ergonomic masu dacewa. Yi shawara tare da ƙwararren ergonomics don guje wa raunin damuwa. Yi amfani da kulawa lokacin ɗagawa da ɗaukar samfur. An samar da wannan samfurin tare da hannu ko abin hannu don ɗagawa da ɗauka.
  • Gargadi: Samfurin yana da nauyi. Don rage haɗarin rauni na sirri ko lalacewa ga na'urar sami taimako lokacin ɗagawa ko ɗaukar samfur.
  • Gargadi: Samfurin yana da nauyi. Yi amfani da ɗaga mutum biyu ko kayan aikin inji.
    Yi amfani kawai da kayan aikin rackmount Tektronix da aka kayyade don wannan samfur.

Bincike da gwajin jagora

Kafin haɗa bincike ko gwajin jagora, haɗa igiyar wutar lantarki daga mai haɗa wutar lantarki zuwa madaidaicin tashar wutar lantarki. Ajiye yatsu a bayan shingen kariya, kariya ga yatsan yatsa, ko alamar taɓawa akan binciken. Cire duk bincike, gwajin jagora da na'urorin haɗi waɗanda basa amfani. Yi amfani da Madaidaicin Ma'auni (CAT), voltage, zafin jiki, tsawo, da amperage da aka kimanta bincike, jagororin gwaji, da masu daidaitawa don kowane ma'auni.

  • Hattara da high voltages : Fahimtar voltage kimantawa don binciken da kuke amfani da shi kuma kada ku wuce waɗancan ƙimar. Matsayi biyu suna da mahimmanci don sani da fahimta:
    • Matsakaicin ma'auni voltage daga ƙarar bincike zuwa jagorar bincike
    • Matsakaicin iyo mai iyotage daga binciken bincike na bincike zuwa ƙasa
      Wadannan biyu voltagkimantawa ya dogara da bincike da aikace -aikacen ku. Dubi sashin Ƙayyadaddun littafin don ƙarin bayani.
      Gargadi: Don hana girgizawar lantarki, kar a wuce matsakaicin ma'auni ko matsakaicin voltage don shigarwar oscilloscope BNC mai haɗawa, tip na bincike, ko jagorar bincike.
  • Haɗa kuma cire haɗin kai yadda ya kamata:Haɗa fitarwar bincike zuwa samfurin auna kafin haɗa binciken zuwa da'irar da ke ƙarƙashin gwaji. Haɗa jagorar binciken bincike zuwa kewaye da ke ƙarƙashin gwaji kafin haɗa shigar da binciken. Cire haɗin shigar da bincike da jagorar binciken bincike daga da'irar da ke ƙarƙashin gwaji kafin cire haɗin binciken daga samfurin aunawa.
  • Haɗa kuma cire haɗin kai yadda ya kamata: Dena kuzarin da'irar ƙarƙashin gwaji kafin haɗawa ko cire haɗin binciken na yanzu. Haɗa jagorar binciken bincike zuwa ƙasa kawai. Kar a haɗa bincike na yanzu zuwa kowace waya mai ɗaukar voltages ko mitoci sama da na yanzu voltagda rating.
  • Duba bincike da na'urorin haɗi: Kafin kowane amfani, duba bincike da na'urorin haɗi don lalacewa (yanke, hawaye, ko lahani a jikin binciken, na'urorin haɗi, ko jaket na USB). Kada a yi amfani idan an lalace.
  • Amfani da oscilloscope na ƙasa: Kada ku yi iyo ginshiƙin bincike na wannan binciken lokacin amfani da oscilloscopes na ƙasa. Dole ne a haɗa ginshiƙan tunani zuwa yiwuwar ƙasa (0 V).
  • Amfani da ma'aunin iyo: Kar a shawagi gubar na wannan binciken sama da ma'aunin mai kima mai iyotage.

Gargadi da bayanin kima na haɗari

Taƙaitaccen aminci na sabis

Sashin taƙaitaccen aminci na Sabis ya ƙunshi ƙarin bayani da ake buƙata don yin aikin aminci a kan samfurin. Kwararrun ma'aikata ne kawai za su yi hanyoyin sabis. Karanta wannan taƙaitaccen aminci na Sabis da taƙaitaccen aminci kafin aiwatar da kowane tsarin sabis.

  • Don gujewa girgiza wutar lantarki  : Kar a taɓa hanyoyin haɗin da aka fallasa.
  • Kada ku yi hidima kadai: Kada ku yi sabis na ciki ko gyare -gyaren wannan samfur sai dai idan wani mutum da ke da ikon bayar da taimakon farko da farfadowa yana nan.
  • Cire haɗin wutar  : Don guje wa girgiza wutar lantarki, kashe wutar samfur kuma cire haɗin igiyar wutar lantarki daga wutar lantarki kafin cire kowane murfi ko fanai, ko buɗe akwati don yin hidima.
  • Yi amfani da kulawa lokacin yin hidima tare da kunnawa: Ƙari mai haɗaritages ko igiyoyin ruwa na iya kasancewa a cikin wannan samfurin. Cire haɗin wuta, cire baturi (idan an zartar),
    da kuma cire haɗin gwajin gwajin kafin cire sassan kariya, siyarwa, ko maye gurbin abubuwan da aka gyara.
  • Tabbatar da aminci bayan gyarawa: Koyaushe bincika ci gaban ƙasa da mahimmancin ƙarfin wutar lantarki bayan yin gyara.

Sharuɗɗa a cikin littafin jagora

Waɗannan sharuɗɗan na iya bayyana a cikin wannan littafin:

Gargadi: Bayanin faɗakarwa yana gano yanayi ko ayyukan da ka iya haifar da rauni ko asarar rai.
HANKALI: Bayanan taka tsantsan suna gano yanayi ko ayyuka waɗanda zasu iya haifar da lalacewa ga wannan samfur ko wata kadara.

Sharuɗɗa akan samfur

Waɗannan sharuɗɗan na iya bayyana akan samfurin:

  • HADARI yana nuna haɗarin rauni kai tsaye kai tsaye yayin da kake karanta alamar.
  • GARGADI yana nuna haɗarin rauni wanda ba a samun sa nan da nan yayin karanta alamar.
  • HANKALI yana nuna haɗari ga dukiya gami da samfurin.

Alamomi akan samfurin

Lokacin da aka yiwa wannan alamar alama akan samfurin, tabbatar da tuntuɓar littafin don gano yanayin haɗarin haɗari da duk wani mataki da yakamata a ɗauka don guje musu. (Wannan alamar kuma za a iya amfani da ita don mayar da mai amfani ga ƙima a cikin littafin.) Alamomi masu zuwa na iya bayyana akan samfurin:

Gabatarwa

Wannan littafin ya ƙunshi bayanin da ake buƙata don sabis na wasu sassa na AWG5200 Masu Haɓaka Waveform Generators. Idan ana buƙatar ƙarin sabis, aika kayan aiki zuwa Cibiyar Sabis na Tektronix. Idan na'urar ba ta aiki da kyau, ya kamata a ɗauki matakan gyara matsala da gyara nan da nan don hana ƙarin matsaloli faruwa. Don hana rauni ko lalacewa ga kayan aiki, la'akari da waɗannan kafin fara sabis:

  • Hanyoyin da ke cikin wannan littafin ya kamata a yi ta wurin ƙwararren mai hidima kawai.
  • Karanta taƙaitaccen bayanin aminci a shafi na 4 da taƙaitaccen aminci na Sabis.
    Lokacin amfani da wannan jagorar don hidima, tabbatar da bin duk gargaɗi, faɗakarwa, da bayanin kula.

Taron hannu

Wannan jagorar tana amfani da wasu ƙa'idodi waɗanda yakamata ku saba dasu. Wasu sassan littafin sun ƙunshi hanyoyin da za ku yi. Don kiyaye waɗancan umarnin a sarari da daidaito, wannan littafin yana amfani da ƙa'idodi masu zuwa:

  • Sunayen sarrafa gaban-panel da menus suna bayyana a cikin akwati iri ɗaya (babban babban birni, duk manyan ƙira, da sauransu) a cikin jagorar kamar yadda ake amfani da su akan gaban kayan aiki da menus.
  • Ana ƙidayar matakan koyarwa sai dai idan akwai mataki ɗaya kawai.
  • Rubutu mai ƙarfi tana nufin takamaiman abubuwan da aka umarce ku don zaɓar, danna, ko sharewa.
    • Exampda: Danna maɓallin ENTER don samun dama ga menu na PRESET.
  • Rubutun rubutun yana nufin takaddun sunaye ko sassan. Hakanan ana amfani da rubutun rubutu a cikin LABARI, CAUTION, da GARGADI.
    • Exampda: Sashin sassan da za a iya maye gurbin ya haɗa da fashewa view zane.

Tsaro

Alamomi da sharuɗɗan da ke da alaƙa da aminci suna bayyana a cikin taƙaitaccen bayanin aminci.

Takardun Samfura

Tebur mai zuwa yana lissafin ƙarin takaddun don AWG5200 Series Arbitrary Waveform Generators.

Tebur 1: Takardun samfur

Takardu Tektronix PN Bayani Asamuwa
Tsaro da Shigarwa

Umarni

 071-3529-XX Wannan takaddar tana ba da amincin samfur, yarda, muhalli, da ƙarfi akan bayanai da ƙayyadaddun ikon kayan aiki na asali. www.tek.com/downloads
Taimakon Bugawa 077-1334-XX Wannan PDF file sigar bugu ne na AWG5200 Series kayan taimako abun ciki. Yana ba da bayanai kan sarrafawa da abubuwan allo. www.tek.com/downloads
Teburin ya ci gaba…
Takardu Tektronix PN Bayani Asamuwa
Ƙididdiga da Ayyuka

Tabbatar da Maganar Fasaha

 077-1335-XX Wannan takaddar tana ba da cikakkun ƙayyadaddun kayan aikin AWG5200 Series kuma yayi bayanin yadda ake tabbatar da hakan

kayan aiki yana aiki bisa ga ƙayyadaddun bayanai.

 www.tek.com/downloads
AWG5200 Series Rackmount

Umarni (GF-RACK3U)

 071-3534-XX Wannan daftarin aiki yana ba da umarni don hawan AWG5200 Series Arbitrary Waveform Generators zuwa madaidaicin rakiyar kayan aiki 19-inch. www.tek.com/downloads
AWG5200 Series Declassification da Tsaro Umarnin 077-1338-xx Wannan daftarin aiki yana ba da umarni don sharewa da tsabtace kayan aikin don ƙaddamarwa da dalilai na tsaro. www.tek.com/downloads

Ka'idar aiki

Wannan sashe yana bayyana aikin lantarki na AWG5200 Series Arbitrary Waveform Generators.

Tsarin ya ƙareview

AWG5200 Series Arbitrary Waveform Generators suna ba da samfura daban-daban tare da s daban-dabanample rates da lambobi na tashoshi.

Tsarin toshe tsarin

Hoton da ke ƙasa shine babban zane na toshe don tashar janareta ta AWG5200 na son rai.

Tsayayyen lokaci an samo shi daga oscillator crystal 10 MHz. A madadin, ana iya amfani da bayanin 10 MHz na waje. Siginar agogo na 2.5-5.0 GHz daga tsarin agogo ya zama gama gari ga duk tashoshi na AWG5200. Kowane tashoshi yana da daidaitawar lokacin agogo mai zaman kansa (lokaci) wanda ke kan tsarin DAC. ’Yan wasan AWG FPGA na tsarin raƙuman ruwa sune tsakiyar ƙira. Waɗannan FPGAs suna dawo da bayanan sigar igiyar ruwa daga ƙwaƙwalwar ajiya, karɓar agogo da kunna lokaci, kuma suna fitar da bayanan tsarin igiyar ruwa ta hanyar keɓancewar siriya mai sauri mai lamba takwas (JESD204B) zuwa DAC. DAC yana ƙirƙira tsarin motsi. Fitowar DAC tana da hanyoyi daban-daban guda huɗu: DC High Bandwidth (DC ta hanya), DC High Voltage, AC kai tsaye (AC thru-hanya), da AC ampingantacce. Lura cewa siginar AC tana ƙarewa ɗaya, kuma tana da fitowar ta a lokaci mai kyau (CH+). Hanyoyin DC sun bambanta. Modulin AWG ya ƙunshi FPGAs ƴan wasa biyu. Kowane yana tafiyar da tashoshi na DAC guda biyu. Cikakken nau'in AWG guda ɗaya da aka ɗora shi yana ba da bayanan yanayin motsi don tashoshi huɗu. Kowane tsarin DAC yana da tashoshi biyu. Fitar bandwidth ya ɗan kasa da rabin DAC sampmitar agogo. DAC tana da yanayin "biyu-data-rate" (DDR) inda DAC ke sampjagoranci a gefuna masu tasowa da faɗuwa na agogo, kuma ana haɗa ƙimar sifar igiyar ruwa akan faɗuwar-baki s.ample. Wannan yana ninka girman girman hoton da aka kashe na tsarin.

Kulawa

Gabatarwa

Wannan sashe ya ƙunshi bayani don masu fasaha don yin hidima ga wasu sassan AWG5200 Masu Haɓaka Waveform Generators. Idan ana buƙatar ƙarin sabis, aika kayan aikin zuwa Cibiyar Sabis na Tektronix.

Abubuwan buƙatun sabis

Don hana rauni na mutum ko lalacewa ga kayan aikin, tabbatar da masu zuwa kafin yin hidimar wannan kayan aikin:

  • Dole ne wani ƙwararren mai hidima ya yi matakai a cikin wannan littafin.
  • Karanta taƙaitaccen bayanin aminci da taƙaitaccen aminci na Sabis a farkon wannan littafin. (Duba Takaitaccen Takaitaccen Tsaro a shafi na 4) da (Duba Takaitaccen Tsaron Sabis).
  • Lokacin amfani da wannan jagorar don yin hidima, bi duk gargaɗi, faɗakarwa, da bayanin kula.
  • Cire da musanya hanyoyin suna bayyana yadda za'a girka ko cire samfurin da za'a iya maye gurbinsa.

Tazarar duba aiki

Gabaɗaya, cak ɗin aikin da aka siffanta a cikin Takaddun Takaddun Shaida da Tabbacin Tabbacin Ayyuka ya kamata a yi kowane watanni 12. Bugu da ƙari, ana ba da shawarar duba aikin bayan gyara. Idan kayan aikin bai cika ka'idojin aiki ba, kamar yadda aka nuna a cikin Takaddun Takaddun Shaida da Tabbacin Ayyuka, gyara ya zama dole.

Rigakafin lalacewar Electrostatic

Wannan kayan aikin yana ƙunshe da abubuwan lantarki waɗanda ke da saurin lalacewa daga fitarwar lantarki. A tsaye voltages na 1kV zuwa 30kV sun zama ruwan dare a wuraren da ba su da kariya.

HANKALI: Fitarwa a tsaye zai iya lalata kowane ɓangaren semiconductor a cikin wannan kayan aikin.

Kula da matakan tsaro masu zuwa don guje wa lalacewa a tsaye:

  • Rage sarrafa abubuwan da ke da hankali.
  • Sufuri da adana abubuwan da suka dace ko taro a cikin kwantenansu na asali, akan layin dogo na ƙarfe, ko kan kumfa. Lakabi kowane fakitin da ya ƙunshi gundumomi masu mahimmanci ko abubuwan haɗin gwiwa.
  • Fitar da a tsaye voltage daga jikin ku ta hanyar sanya madaurin wuyan hannu yayin sarrafa waɗannan abubuwan. Bayar da majalissar da ba ta dace ba ko abubuwan da aka gyara yakamata a yi su a wurin aiki mara-tsayawa ta ƙwararrun ma'aikata.
  • Babu wani abu da zai iya ƙirƙira ko riƙe caja a tsaye bai kamata a ƙyale a saman wurin aiki ba.
  • Ci gaba da taƙaita jagorar abubuwan tare a duk lokacin da zai yiwu.
  • Dauki abubuwan da jiki ke buƙata, ba ta hanyar jagora ba.
  • Kada a zame abubuwan da aka gyara akan kowane wuri.
  • Guji sarrafa abubuwan da aka gyara a wuraren da ke da rufin bene ko aikin aiki wanda ke iya haifar da cajin tsaye.
  • Kada a cire taron allon kewayawa daga farantin hawa. Farantin mai hawa yana da mahimmanci mai ƙarfi, wanda ke hana lalacewa ga abubuwan da ke kan dutsen.
  • Yi amfani da baƙin ƙarfe wanda ke da alaƙa da ƙasan ƙasa.
  • Yi amfani da kayan aikin antistatic na musamman kawai, nau'in tsotsa ko nau'in lalata.

Lura: Ana ba da shawarar solder mara gubar kamar SAC 305 don yin gyare-gyare a cikin wannan kayan aikin. Ba a ba da shawarar tsaftace ragowar rosin ba. Yawancin gyare-gyaren tsaftacewa suna sake kunna rosin kuma suna yada shi a ƙarƙashin abubuwan da aka gyara inda zai iya haifar da lalata a ƙarƙashin yanayin danshi. Ragowar rosin, idan an bar shi shi kaɗai, baya nuna waɗannan abubuwan lalata.

Dubawa da tsaftacewa

  • Wannan sashe yana bayyana yadda ake bincika datti da lalacewa da kuma yadda za a tsaftace waje na kayan aiki.
  • Rufin kayan aiki yana taimakawa wajen kiyaye ƙura daga kayan aiki, kuma ana buƙata don biyan buƙatun EMI da sanyaya. Ya kamata murfin ya kasance a wurin lokacin da kayan aiki ke aiki.
  • Dubawa da tsaftacewa, lokacin da ake yin su akai-akai, na iya hana kayan aiki rashin aiki da haɓaka amincinsa. Kulawa na rigakafi ya ƙunshi dubawa na gani da tsaftace kayan aiki da amfani da kulawa gabaɗaya lokacin sarrafa shi. Sau nawa ya kamata a yi rigakafin rigakafi ya dogara da tsananin yanayin da ake amfani da kayan aikin. Lokacin da ya dace don yin rigakafin rigakafi shine kawai kafin yin kowane gyare-gyaren samfur.
  • Bincika da tsaftace kayan aiki akai-akai kamar yadda yanayin aiki ke buƙata.Wannan sashe yana bayyana yadda za a bincika datti da lalacewa da kuma yadda za a tsaftace waje na kayan aiki.
  • Rufin kayan aiki yana taimakawa wajen kiyaye ƙura daga kayan aiki, kuma ana buƙata don biyan buƙatun EMI da sanyaya. Ya kamata murfin ya kasance a wurin lokacin da kayan aiki ke aiki.
  • Dubawa da tsaftacewa, lokacin da ake yin su akai-akai, na iya hana kayan aiki rashin aiki da haɓaka amincinsa. Kulawa na rigakafi ya ƙunshi dubawa na gani da tsaftace kayan aiki da amfani da kulawa gabaɗaya lokacin sarrafa shi. Sau nawa ya kamata a yi rigakafin rigakafi ya dogara da tsananin yanayin da ake amfani da kayan aikin. Lokacin da ya dace don yin rigakafin rigakafi shine kawai kafin yin kowane gyare-gyaren samfur.
  • Bincika da tsaftace kayan aiki sau da yawa kamar yadda yanayin aiki ke buƙata.

Binciken waje

HANKALI: Kada a yi amfani da sinadarai masu tsaftacewa waɗanda za su iya lalata robobin da ake amfani da su a cikin wannan kayan aikin.

Bincika wajen kayan aikin don lalacewa, lalacewa, da ɓarna, ta amfani da Tebura 2 mai zuwa a shafi na 12 a matsayin jagora. Ya kamata a duba kayan aikin da ya bayyana an jefar da shi ko aka yi amfani da shi sosai don tabbatar da aiki da aiki daidai. Nan da nan gyara lahani wanda zai iya haifar da rauni ko haifar da ƙarin lalacewa ga kayan aiki.

Tebur 2: Jerin abubuwan dubawa na waje

Abu Duba don Gyara aikin
Cabinet, gaban panel, da murfin Fassara, karce, nakasawa, kayan aikin da suka lalace ko gaskets Aika kayan aiki zuwa Tektronix don sabis.
Maɓallai na gaba-gaba Maɓallan da suka ɓace ko lalace Aika kayan aiki zuwa Tektronix don sabis.
Masu haɗawa Karyewar harsashi, fashewar rufi, ko gurɓatattun lambobin sadarwa. Datti a cikin masu haɗawa Aika kayan aiki zuwa Tektronix don sabis.
Dauke hannu da ƙafafu Daidaitaccen aiki. A cikin wannan jagorar, hanyoyin suna nufin "gaba," "baya," "saman," da dai sauransu na kayan aiki Gyara ko musanya hannun / ƙafa mara lahani
Na'urorin haɗi Abubuwan da suka ɓace ko sassan abubuwa, lanƙwasa

fitattun igiyoyin igiyoyi masu karye ko masu karye, ko masu haɗin da suka lalace

 Gyara ko musanya abubuwan da suka lalace ko suka ɓace, igiyoyin igiyoyi masu ɓarna, da na'urori marasa lahani

Tsabtace waje

Don tsaftace wajen kayan aikin, yi matakai masu zuwa:

  1. Kashe ƙura ta hanyar busassun kayan aiki tare da bushewa, ƙarancin matsa lamba, iska mai lalacewa (kimanin 9 psi).
  2. Cire ƙurar da aka sako-sako da ita a wajen kayan aiki tare da zane maras lint.
    HANKALI:Don hana samun danshi a cikin kayan aiki yayin tsaftacewar waje, yi amfani da isasshen ruwa kawai don dampen kyalle ko mai nema.
  3. Cire dattin da ya rage tare da zane mara lint dampwanda aka sanya a cikin abin wanke-wanke na gaba ɗaya da maganin ruwa. Kada a yi amfani da masu tsabtace abrasive.

Lubrication
Babu man shafawa na lokaci-lokaci da ake buƙata don wannan kayan aikin.

Cire kuma musanya
Wannan sashe ya ƙunshi hanyoyin cirewa da shigar da samfuran abokin ciniki-masu maye gurbinsu a cikin jerin janareta na AWG5200. Duk sassan da aka jera a cikin ɓangaren Sassan Matsala na wannan jagorar ƙirar ƙira ce.

Shiri

Gargadi: Kafin aiwatar da wannan ko kowace hanya a cikin wannan jagorar, karanta cikakken bayanin aminci da taƙaitaccen aminci na sabis a farkon wannan jagorar. Har ila yau, don hana yiwuwar lalacewa ga sassan, karanta bayanin hana ESD a wannan sashe. Wannan sashe ya ƙunshi abubuwa kamar haka:

  • Jerin kayan aikin da ake buƙata don cirewa da ƙwace kayayyaki
  • Zane mai gano maɓalli don nemo abubuwan da za a iya maye gurbinsu
  • umarnin haɗin kai
  • Hanyoyin cirewa da sake shigar da kayan aikin kayan aiki

Gargadi: Kafin cirewa ko maye gurbin kowane tsari, cire haɗin igiyar wutar lantarki daga layin voltage tushen. Rashin yin hakan na iya haifar da mummunan rauni ko mutuwa.

Kayan aiki da ake buƙata

Tebur mai zuwa yana lissafin kayan aikin da zaku buƙaci cirewa da maye gurbin kayan aikin kayan aiki.

Table 3: Abubuwan da ake buƙata don cirewa da maye gurbin kayayyaki

Suna Bayani
Direba mai karfin wuta Yana karɓar 1/4 inch sukudireba bits. Matsakaicin karfin juyi na 5 in/lb. zuwa 14 in/lb.
Farashin TORX T10 TORX direban bit don T10 size dunƙule shugabannin
Farashin TORX T20 TORX direban bit don T20 size dunƙule shugabannin
Farashin TORX T25 TORX direban bit don T25 size dunƙule shugabannin

Cire kuma musanya hanyoyin da ba sa buƙatar daidaita masana'anta

Lura: Ba a buƙatar daidaitawa lokacin da kake cire majalisai na waje, wanda aka nuna a wannan sashe.

Ƙafafun kusurwar baya

Akwai ƙafafu na kusurwa huɗu na baya.

  1. Tsaya kayan aiki akan hannayensa, tare da gefen baya yana fuskantar sama.
  2. Cire dunƙule mai riƙe da ƙafa, ta amfani da tip T25.
  3. Don maye gurbin ƙafar, daidaita shi a hankali kuma riƙe shi a jeri yayin shigar da dunƙule. Yi amfani da tip T25 da karfin juyi zuwa 20 in-lbs.

Ƙafafun ƙasa

Akwai ƙafa huɗu a ƙasan kayan aikin: ƙafafu biyu masu jujjuyawa a gaba, ƙafafu biyu a tsaye a baya.

  1. Saita kayan aiki a samansa, tare da ƙasa yana fuskantar sama.
  2. Cire filogi na roba wanda aka sanya a cikin ƙafar ƙasa da kake maye gurbin.
  3. Cire dunƙulewar da ke haɗa ƙafar, sannan cire ƙafar.
  4. Don maye gurbin ƙafar, sanya shi a matsayi kuma shigar da dunƙule, ta amfani da tip T-20, da jujjuya zuwa 10 in-lbs.

Hannu

  1. Don cire hannaye, sanya kayan aiki a ƙasan aikin.
  2. Cire sukurori guda uku waɗanda ke haɗe hannu zuwa kayan aiki kamar yadda aka nuna, kuma cire hannun.
  3. Don maye gurbin magudanar, sanya hannun a kan kayan aiki, daidaita ramukan da ke cikin hannun tare da posts akan kayan aiki. Haɗa hannun hannu tare da sukurori biyu na T25 da juzu'i zuwa 20 in-lbs.

Hannun gefe

  1. Cire sukurori huɗu ta amfani da T20 bit don cire manyan iyakoki guda biyu. Yayin shigarwa, karfin juyi zuwa 20 in*lb tare da bit T20.
  2. Cire hannun silicone daga saman masu sarari kuma cire masu sarari biyu.
  3. Don maye gurbin, juya hanya.

Kundin rikodin

Lura: Kullin maɓalli shine maɓalli na turawa. Dole ne ku bar aƙalla inci 0.050 na sharewa tsakanin fuskar baya na ƙugiya da ɓangaren gaba.

  1. Don cire ƙulli mai ɓoyewa, sassauta saitin dunƙule. Kada a cire sarari da kwaya a ƙarƙashin ƙugiya.
  2. Don maye gurbin ƙulli mai ɓoye:
    1. A hankali daidaita ƙulli mai ɓoye a kan madaidaicin madannin, a saman sarari da goro.
    2. Tabbatar cewa akwai aƙalla 0.050" na sharewa tsakanin fuskar baya na ƙugiya da ɓangaren gaba don ba da damar yin aiki da maɓallin turawa.
    3. Shigar da ƙara ƙara saitin dunƙule. Kada ku wuce gona da iri.

Hard ɗin da ake cirewa

  1. Ana ɗora rumbun kwamfutarka zuwa sled ɗin rumbun kwamfutarka dake kan gaban panel. Don cire sled ɗin tare da rumbun kwamfutarka, buɗe babban yatsan yatsa guda biyu a gaban panel (wanda aka yiwa lakabi da REMOVABLE HARD DRIVE) sannan ka zame rumbun kwamfutarka da aka zare daga cikin kayan aikin.
  2. Don maye gurbin, juya hanya.

Haɓaka software

Haɓaka software, kamar yadda akwai, suna nan a www.tektronix.com/downloads.

Daidaitawa

HANKALI: Jerin AWG5200 yana da kayan aikin daidaitawa, wanda baya buƙatar kowane sigina ko kayan aiki na waje. Wannan kai-cal ba ya maye gurbin cikakken masana'anta ta Tektronix. Dole ne a yi cikakken gyaran masana'anta bayan kowace hanya da ta buɗe gaban panel ko na baya. Duk wani ma'auni da aka yi bayan buɗe ɓangaren gaba ko na baya, ba tare da yin cikakken aikin masana'anta ba daga baya, ba shi da inganci.

Daidaitawar masana'anta

Dole ne a yi gyaran masana'anta bayan kowane tsarin tsarin da ya buɗe gaban panel ko na baya. Ma'aikatan Tektronix ne kawai za su iya yin wannan gyare-gyare. Idan an buɗe gaban panel ko na baya, cikakken ma'aikata calibration dole ne a yi ta Tektronix.

Mayar da daidaiton masana'anta

Idan kun kunna kai-cal kuma sakamakon ya yi muni, zaku iya dawo da ma'aunin ma'auni ta danna RESTORE FACTORY CAL a cikin taga Calibration.

Gyaran kai

Gudanar da kayan aikin calibration a ƙarƙashin sharuɗɗa masu zuwa:

  • Idan aikace-aikacen ku yana buƙatar ingantaccen aiki, yakamata ku gudanar da kayan aikin daidaitawa kafin yin gwaje-gwaje masu mahimmanci idan akwai zafin jiki sama da 5 °C sama ko ƙasa da zafin da aka yi na ƙarshe. Dole ne ku gudanar da cikakken kai-cal. Yana ɗaukar kusan mintuna 10. Idan kun zubar da ciki, ba za ta rubuta wani sabon ma'auni ba.
  • Koyaushe fara lissafin kai ta hanyar yin ƙaddamarwar Calibration. Yana da wani hardware sake saiti; yana shirya don daidaitawa.
  • LOOP: za ku iya madauki madaidaicin, amma ba zai taɓa ceton madaidaicin ba. Loop na iya taimakawa gano matsalolin tsaka-tsaki.
  • Allon yana juya ruwan hoda lokacin da akwai kuskure ko gazawa.

Gudanar da daidaitawar kai

Don gudanar da kayan aikin calibration, ci gaba kamar haka:

  1. Babu sigina ko kayan aiki na waje da ya zama dole. Bada kayan aiki don yin aiki na akalla mintuna 20 a ƙarƙashin yanayin muhalli wanda zai yi aiki bayan daidaitawa. Tabbatar cewa zafin jiki na kayan aiki ya daidaita.
  2. Bude taga Calibration:
    1. Zaɓi shafin Utilities sarari aiki.
    2. Zaɓi maɓallin Diag & Cal.
    3. Zaɓi maɓallin Diagnostics & Calibration.
    4. Zaɓi maɓallin Calibration, sannan akwatin rajistan Calibration don zaɓar duk abubuwan daidaitawa, kuma canza zaɓuɓɓukan Log kamar yadda ake so. Dukkan gwaje-gwaje da gyare-gyare an zaɓi su yanzu.
  3. Danna Fara don fara daidaitawa. Maɓallin farawa yana canzawa zuwa Zubar da ciki yayin da ake aiwatar da daidaitawa.
  4. Yayin daidaitawa, zaku iya danna maɓallin Zubar da ciki don dakatar da daidaitawa kuma komawa zuwa bayanan daidaitawa na baya. Idan kun yi haka, ba za a adana ma'aunin daidaitawa ba.
  5. Idan kun ƙyale gyare-gyaren don kammala, kuma babu kurakurai, ana amfani da sabon bayanan daidaitawa kuma an adana su. Ana nuna sakamakon wucewa/ gazawa a cikin madaidaicin panel na shafin Calibration, kuma ya ƙunshi kwanan wata, lokaci, da bayanin zafin jiki mai alaƙa.
  6. Ana adana bayanan ƙididdigewa ta atomatik a cikin ƙwaƙwalwar mara mara ƙarfi. Idan ba kwa son yin amfani da bayanan daidaitawa daga gyare-gyaren kai na baya-bayan nan, danna maballin maɓalli na ma'aikata. Wannan yana loda ainihin bayanan daidaitawa da aka aika da kayan aiki.

Bincike

Wannan sashe yana ƙunshe da bayanan da aka ƙera don taimakawa warware matsalar jerin kayan aikin AWG5200 zuwa matakin ƙirar. Ba a tallafawa gyare-gyaren matakin sassa. Yi amfani da bincike na kayan aiki don taimakawa magance waɗannan kayan aikin.

Lura: Ana samun gwajin gwajin yayin farawa na yau da kullun na aikace-aikacen Series AWG5200.

Ajiye bayanai

Kafin gudanar da kowane bincike ko ƙididdiga akan naúrar, kwafi C:\ProgramDataTektronixAWGAWG5200Logs zuwa wani wuri.
Review wannan bayanan tare da editan XML ko ma'auni na Excel don gano kurakuran. Sannan lokacin da kuke gudanar da bincike ko ƙididdiga, zaku iya kwatanta halin kayan aiki na yanzu da na baya.

Ajiye dagewa file

Kafin ka fara gyara matsala, yi amfani da Microsoft Windows Explorer don adana dagewar file zuwa wurin kwafin sabis mai aminci. Bayan an gama sabis, mayar da dagewar file. Nacewa file wurin shine C:\ProgramDataTektronix\AWG\AWG5200\persist.xml.

sakamakon lissafin lissafi file

Sakamakon lissafin lissafin file Mafari ne mai kyau lokacin gano matsalar da aka ruwaito. Wannan file ya ƙunshi bayanan tantance kayan aikin kuma ya haɗa da waɗanne gwaje-gwajen da aka gudanar da sakamako. Wannan .xml file kuma mafi kyawun hanyar zuwa view da file shine kamar haka:

  1.  Buɗe maƙunsar rubutu na Excel.
  2. Danna kan Data tab.
  3. Danna Get Data sannan ka zaba File > Daga XML.
  4. Je zuwa C:\ProgramDataTektronixAWG\AWG5200\resultStatistics.xml kuma shigo da bayanan.

An gama bincikeview

Kayan aiki yana gudanar da wasu gwaje-gwajen kai a farawa. Waɗannan su ne gwaje-gwajen POST. Gwajin POST na duba haɗin kai tsakanin allunan sannan kuma duba cewa ƙarfin yana cikin kewayon da ake buƙata, kuma agogon suna aiki. Hakanan zaka iya zaɓar gudanar da gwaje-gwajen POST a kowane lokaci, ta zaɓin POST Kawai a cikin taga Diagnostics. Idan akwai kuskure, kayan aikin yana shiga cikin bincike kai tsaye. Matakan bincike a cikin bishiyar sune:

  • Matsayin allo (kamar System)
  • Wurin da za a gwada (kamar System Board)
  • Abubuwan da za a gwada (kamar Sadarwa)
  • Gwaje-gwaje na gaske

Amfani da log directory

Kuna iya amfani da Microsoft Windows Explorer don kwafe log ɗin files daga: C:\ProgramDataTektronixAWGAWG5200Logs zuwa amintaccen wurin kwafin sabis. Ana iya yin hakan ba tare da aikace-aikacen yana gudana ba. Wannan jagorar ya ƙunshi XML files, wanda ke nuna ƙididdiga game da binciken kayan aikin da aka gudanar. Files da kuke so ku duba su ne waɗanda suka fara da sakamako, irin su resultHistory (raw data daga log ɗin da ke ƙasan allon lokacin da kuke gudanar da bincike) da calResultHistory (raw data daga log ɗin da ke ƙasan allo lokacin da kuke gudanar da calibration), da calResultStatistics. Kwafi rajistan ayyukan bincike daga AWG zuwa kan kwamfutarka, inda zaku iya amfani da editan XML zuwa view rajistan ayyukan. Don shigo da rajistan ayyukan cikin ma'auni na Excel, yi amfani da umarnin shigo da kaya a cikin Excel, misaliample: Data->Daga Wasu Tushen -> Daga Shigo da Bayanan XML (zabi file don buɗewa da * ƙididdiga a suna).

Files da utilities

Tsari. Lokacin da ka zaɓi Game da maɓallin AWG na a ƙarƙashin Utilities, allon farko yana nuna bayanai kamar shigar da zaɓuɓɓukan da aka shigar, lambar serial ɗin kayan aiki, sigar software, da nau'ikan PLD. Abubuwan da ake so. Bincika don tabbatar da cewa matsalar ba ta haifar da wani abu da aka kashe ba, kamar nuni, tsaro (USB), ko saƙon kuskure. Saƙonnin kuskure suna bayyana a ƙananan ɓangaren hagu na allon, don haka idan ba su bayyana ba, za a iya kashe su. Matsayi kuma yana bayyana a ƙasan hagu na allon.

Diagnostics & Calibration taga

Lokacin da ka zaɓi Utilities> Diag & Cal>Diagnostics & Calibration, za ka buɗe taga inda za ka iya gudanar da Self Calibration ko Diagnostics. Allon yana nuna lokaci na ƙarshe da ƙaddamarwar ke gudana da zafin jiki na kayan aiki lokacin da daidaitawar ke gudana. Idan zafin jiki ba ya da iyaka, saƙo yana faɗakar da ku don sake aiwatar da daidaitawar kai. Don bayani kan daidaitawar kai, duba sashin kan Calibration. Wannan ba daidai yake da cikakken daidaitawar masana'anta ba.

Kuskuren log

Lokacin da ka zaɓi Diagnostics, za ka iya zaɓar ƙungiyoyin bincike ɗaya ko fiye don gudu, sannan zaɓi Fara don gudu. Lokacin da gwaje-gwajen sun cika, log ɗin zai bayyana a ɓangaren ƙasa na allon. Kuna iya saita log ɗin don nuna Duk sakamako ko gazawa kawai. Idan an zaɓi Duk sakamakon, log file kullum za a samar. Idan gazawa kawai aka zaɓi, log file za a samar ne kawai idan gwajin da aka zaɓa ya gaza. Duba Nunin gazawar Bayani yana ba da ƙarin bayani game da gwajin da baiyi nasara ba.

Lura: Mafi kyawun saituna don magance matsala shine zaɓi Rashin gazawa kawai kuma duba Nuna bayanan gazawar.

Danna Kwafi rubutu don yin rubutu file na log ɗin, wanda zaka iya kwafa a cikin Kalma file ko maƙunsar rubutu. Kuskuren log ɗin yana faɗi lokacin da kayan aikin ya ci jarabawa, lokacin da ya gaza, da sauran bayanan gazawar da suka dace. Wannan baya kwafe abubuwan da ke cikin log ɗin file. Shiga log ɗin files kuma karanta abubuwan da ke cikin su. (Duba Yin amfani da littafin tarihin shiga shafi na 17) Lokacin da kuka rufe taga Diagnostics, kayan aikin za su koma yanayin da ya gabata, bayan gudanar da gajeriyar ƙaddamar da kayan aiki. An sake dawo da yanayin da ya gabata, ban da cewa ba a adana waveforms da jeri a cikin ƙwaƙwalwar ajiya; za a sake loda su.

Umarnin sake tattarawa

Yi amfani da waɗannan umarnin don shirya kayan aikin ku don jigilar kaya zuwa Tektronix, Inc., Cibiyar Sabis:

  1. Makala a tag zuwa kayan aikin da ke nunawa: mai shi, cikakken adireshi da lambar wayar wani a kamfanin ku wanda za a iya tuntuɓar ku, lambar serial ɗin kayan aiki, da bayanin sabis ɗin da ake buƙata.
  2. Kunna kayan aiki a cikin kayan marufi na asali. Idan kayan marufi na asali ba su samuwa, bi waɗannan kwatance:
    1. Sami kwali na kwali, mai girman inci shida ko fiye fiye da girman kayan aikin. Yi amfani da kwandon jigilar kaya wanda ke da ƙarfin gwaji na akalla 50 (kilogram 23).
    2. Kewaye tsarin tare da jakar kariya (anti-static).
    3. Sanya dunnage ko kumfa urethane tsakanin kayan aiki da kwali. Idan kuna amfani da kwayayen Styrofoam, cika akwatin kuma ku matsa kwaya ta rufe murfin. Ya kamata a sami inci uku na cushion cushion a kowane gefen kayan aikin.
    4. Rufe kwandon tare da tef ɗin jigilar kaya, masana'antu stapler, ko duka biyun.

Abubuwan da za a iya maye gurbinsu

Wannan sashe ya ƙunshi sassa daban-daban don ƙungiyoyin samfura daban-daban. Yi amfani da lissafin da ke cikin sashin da ya dace don ganowa da yin odar ɓangarorin maye gurbin samfur naku.

Daidaitattun kayan haɗi. An jera daidaitattun kayan haɗi na waɗannan samfuran a cikin littafin jagorar mai amfani. Ana samun littafin jagorar mai amfani a www.tek.com/manuals.

Sassan da ke yin odar bayanai

Yi amfani da lissafin da ke cikin sashin da ya dace don ganowa da yin odar ɓangarorin maye gurbin samfur naku. Ana samun sassan sauyawa ta wurin ofishin filin Tektronix ko wakilin ku. An jera daidaitattun kayan haɗi na waɗannan samfuran a cikin littafin jagorar mai amfani. Ana samun littafin jagorar mai amfani a www.tek.com/manuals.
Canje -canje ga samfuran Tektronix wani lokaci ana yin su don karɓar ingantattun abubuwan yayin da suke samuwa kuma don ba ku fa'idar sabbin abubuwan haɓakawa. Sabili da haka, lokacin yin odar sassa, yana da mahimmanci a haɗa waɗannan bayanan a cikin odar ku:

  • Lambar sashi
  • Nau'in kayan aiki ko lambar ƙirar
  • Serial lambar kayan aiki
  • Lambar gyara kayan aiki, idan ta dace

Idan kayi odar wani sashi wanda aka maye gurbinsa da wani daban ko ingantaccen sashi, ofishin filin Tektronix na gida ko wakili zai tuntube ka dangane da kowane canji a lambar sashi.

Module sabis

  • Za'a iya yin hidimar ƙirar ƙira ta zaɓi ɗaya daga cikin zaɓuɓɓuka uku masu zuwa. Tuntuɓi Cibiyar Sabis na Tektronix na gida ko wakilin don taimakon gyara.
  • Canjin Module. A wasu lokuta, zaku iya musanya na'urarku don wani samfurin da aka sake ƙera. Waɗannan na'urorin suna tsada ƙasa da sabbin kayayyaki kuma sun haɗu da ƙayyadaddun masana'anta iri ɗaya. Don ƙarin bayani game da shirin musayar module, kira 1-800-833-9200. A wajen Arewacin Amirka, tuntuɓi ofishin tallace-tallace na Tektronix ko mai rarrabawa; duba Tektronix Web shafin (www.tek.com) don jerin ofisoshi.
  • Gyaran Module da dawowa. Zaku iya aiko mana da tsarin ku don gyarawa, bayan haka zamu mayar muku da shi.
  • Sabbin kayayyaki. Kuna iya siyan kayan maye kamar yadda sauran sassa masu maye suke.

Taqaitaccen bayani

Gajerewar sun yi daidai da daidaitattun ma'auni na Ƙasar Amirka ANSI Y1.1-1972.

Yin amfani da jerin sassan maye gurbin

Wannan sashe ya ƙunshi jerin abubuwan da za a iya maye gurbinsu na inji da/ko na lantarki. Yi amfani da wannan jeri don ganowa da yin odar sassa daban-daban. Tebur mai zuwa yana bayyana kowane shafi a jerin sassan.

Bayanin jerin sassan ginshiƙi

Rukunin Sunan shafi Bayani
1 Hoto & lambar fihirisa Ana ambaton abubuwa a cikin wannan sashe ta adadi da lambobin adadi zuwa fashewar view misalai da ke biyo baya.
2 Lambar sashi na Tektronix Yi amfani da wannan lambar ɓangaren lokacin yin odar sassan maye daga Tektronix.
3 da 4 Serial number Rukuni na uku yana nuna lambar serial ɗin da sashin ya fara tasiri. Shafi na hudu yana nuna lambar serial ɗin da aka dakatar da sashin. Babu shigarwa da ke nuna ɓangaren yana da kyau ga duk serial lambobi.
5 Qty Wannan yana nuna adadin sassan da aka yi amfani da su.
6 Suna &

bayanin

 An ware sunan abu daga bayanin ta masara (:). Saboda ƙuntataccen sarari, sunan abu wani lokaci yana iya bayyana kamar bai cika ba. Yi amfani da littafin Jagoran Kundin Tarihi na Tarayyar Amurka H6-1 don ƙarin gane sunan abu.

Abubuwan da za a iya maye gurbinsu - na waje

Hoto na 1: Sassan da za a iya maye gurbin – waje sun fashe view

Table 4: Abubuwan da za a iya maye gurbinsu - waje

Lambar fihirisa Tlambar kashi na ektronix Serial no. tasiri Serial no. daina Qty Suna & kwatance
Koma zuwa Hoto 1 shafi na 21
1 348-2037-XX 4 KAFA, BAYA, KUSUWA, KASASHEN TSIRA
2 211-1481-XX 4 SCROW, INJI, 10-32X.500 PANHEAD T25, TARE DA BLUE NYLOK PATCH
3 211-1645-XX 2 SCREW, INJI, 10-32X.750 FLATHEAD, 82 DEG, TORX 20, TARE DA FANTIN KUlle Zare
4 407-5991-XX 2 HANNU, GEFE, TOP CAP
5 407-5992-XX 2 SARKI, HANNU, GEFE
Teburin ya ci gaba…
Lambar fihirisa Tlambar kashi na ektronix Serial no. tasiri Serial no. daina Qty Suna & kwatance
6 367-0603-XX 1 OVERMOLD ASSY, HANNU, GEFE, ANA KAMARIN TSIRA
7 348-1948-XX 2 KAFA, TSAYE, NYLON W/30% CIKE glass, SAMUN TSIRA
8 211-1459-XX 8 SCROW, INJI, 8-32X.312 PANHEAD T20, TARE DA BLUE NYLOK PATCH
9 348-2199-XX 4 KUSHI, KAFA; SANTOPRENE, (4) BAKI 101-80)
10 211-1645-XX 6 SCREW, INJI, 10-32X.750 FLATHEAD, 82 DEG, TORX 20, TARE DA FANTIN KUlle Zare
11 367-0599-XX 2 HANYAR ASSY, TUSHE DA RIKO, ANA SAMUN TSIRA
12 348-1950-XX 2 MAJALISAR KAFA, JUYA, SAMUN TSIRA
13 348-2199-XX 4 KUSHI; KAFA, TARE
14 377-0628-XX 1 KNOB, KYAUTA SHI
15 366-0930-XX 1 KNOB, ASSY
16 214-5089-XX 1 SPRING; KWALLIYA

Takardu / Albarkatu

Tektronix AWG5200 Series Masu Haɓaka Waveform Generators [pdf] Littafin Mai shi
Jerin AWG5200, Masu Samar da Waveform Na Sabani, AWG5200 Series Masu Haɓaka Waveform Generators

Magana

Labarai masu alaka

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *