LITLHAKISO TSA BASTL Ciao Eurorack Audio Output Module

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Brand: Lisebelisoa tsa Bastl
• Mohlala: Ciao!!
• Tlhahiso ea Line: Quad
• Tšebeliso ea Matla: Fuse ea PTC le diode e sirelelitsoeng
• Sehokelo sa Matla: 10-pin
• Tlhokahalo ea MatlaTlhaloso: 5 HP

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Khokelo ea Matla

Ho sebelisa Ciao !! Quad Line Output, latela mehato e ka tlase:

1. Fumana sehokelo sa matla sa lipini tse 10 sesebelisoa.
2. Hokela phepelo ea motlakase e tsamaellanang le sehokelo sa matla sa lipini tse 10.
3. Netefatsa hore phepelo ea motlakase e lekantsoe bonyane 5 HP.
4. Etsa bonnete ba hore fuse ea PTC le tšireletso ea diode li teng ho thibela tšenyo ea sesebelisoa.

2. Audio Output Setup

The Ciao!! Quad Line Output e fana ka liphetho tse 'ne tse arohaneng tsa molumo. Ho seta tlhahiso ea molumo:

1. Hokela lisebelisoa tsa hau tsa molumo (mohlala, libui, mixer, kapa amplifier) ​​ho li-jacks tsa tlhahiso ea mohala sesebelisoa.
2. Netefatsa hore sesebediswa sa modumo se timilwe pele o etsa dikgokelo.
3. Sebelisa lithapo tse loketseng (joalo ka RCA kapa XLR) ho hokela lisebelisoa tsa hau tsa molumo.
4. Fetola maemo a molumo ho Ciao ka bobeli !! Quad Line Output le lisebelisoa tsa hau tsa molumo ho ea maemong ao u a batlang.

3. Ho rarolla mathata

Haeba u kopana le mathata leha e le afe ka Ciao !! Quad Line Output, ka kopo leka mehato e latelang ea ho rarolla mathata:

1. Lekola khokahano ea motlakase ho netefatsa hore e hoketsoe ka mokhoa o sireletsehileng le hore phepelo ea motlakase e sebetsa hantle.
2. Lekola fuse ea PTC le ts'ireletso ea diode ho netefatsa hore li ntse li tiile.
3. Netefatsa hore lithapo tsohle tsa molumo li hoketsoe hantle 'me ha lia senyeha.
4. Leka ho hokahanya sesebelisoa ho lisebelisoa tse fapaneng tsa molumo ho bona hore na bothata bo teng ho Ciao !! Quad Line Output kapa sesebelisoa sa molumo.
5. Haeba bothata bo ntse bo tsoela pele, sheba bukana ea mosebelisi bakeng sa thuso e eketsehileng kapa ikopanye le tšehetso ea bareki.

LBH

P: Na nka sebelisa Ciao !! Quad Line Output e nang le li-headphones?

A: Che, Ciao!! Quad Line Output e etselitsoe tlhahiso ea boemo ba mohala 'me ha e lokele khokahano e tobileng ea li-headphone. U tla hloka headphone e arohaneng ampLifier ho sebelisa li-headphones ka sesebelisoa sena.

P: Morero oa ts'ireletso ea fuse ea PTC le diode ke eng?

A: Ts'ireletso ea PTC le ts'ireletso ea diode e sireletsa sesebelisoa khahlano le maqhubu a matla le li-circuits tse khuts'oane, ho thibela tšenyo ho Ciao ka bobeli !! Quad Line Output le lisebelisoa tse hokahaneng.

P: Na nka hokela Ciao tse ngata !! Quad Line Outputs hammoho?

A: Ee, o ka khona ho kopanya Ciao tse ngata !! Quad Line Outputs ka ho hokahanya liphetho tsa mola oa yuniti e le 'ngoe ho tse kenang moleng oa yuniti e ngoe. Sena se o lumella ho holisa bokhoni ba hau ba ho hlahisa molumo.

CIAO!!

Ciao!! ke mojule oa tlhahiso e kopaneng le e shebaneng le ts'ebetso e hahiloeng ka likarolo tsa boleng bo holimo, tse nang le lerata le tlase le moralo bakeng sa phetoho ea maemo a holimo-limo a modular-to-line. E na le liphetho tsa mela ea 2 ea stereo, headphone amplifier, le maqheka a 'maloa ho phahamisa letsoho la eona. Lipara tsa stereo A le B li na le taolo ea boemo bo inehetseng e nang le matšoao le temoso e ka bang teng ea boemo ba mohala bakeng sa matšoao a fetang 1 Volt. Channel A e na le liphetho tsa jack tse leka-lekaneng tsa 6.3mm ho fokotsa lerata le ho netefatsa boleng bo holimo ha o tsamaisa sistimi ea molumo. Channel B e hlahisa ka jack ea stereo ea 3.5mm. Molumo o khethehileng oa li-headphone o fana ka matla a phahameng a tlhahiso 'me o kenyelletsa sesebelisoa sa khetho bakeng sa ho mamela liteishene tsa A kapa tsa B. Ho tloaeleha ha lintho tse kenang ho etsa hore ho be bonolo ho aba lipontšo har'a liphetho. Phetoho ea MIX e ka kopanya Channel B ho Channel A ho stereo, ea bula module e sebetsang pele ho mamela kapa e bonolo ea ho kopanya stereo.

LIKAROLOANA

• Likanale tse 2 tsa stereo A le B
• Sephetho sa Channel A se na le li-jacks tse leka-lekaneng tsa 6.3mm (¼")
• Sehlahisoa sa Channel B se na le jack ea stereo ea 3.5mm (⅛")
• Litaolo tsa boemo bo inehetseng bakeng sa kanale ka 'ngoe
• Pontšo ea mats'oao e nang le phumano ea li-clip tsa boemo ba mohala
• Ho tloaeleha ho kenya ka bohlale
• Molumo oa li-headphone o nang le sesebelisoa se khethang kanale
• Stereo MIX e fetolela ho kopanya Channel B ho Channel A
• Back jumper bakeng sa ho iketsetsa tsela ea ho tloaeleha

LIEKETSENG MOTS'OANE

• 5 HP
• Fuse ea PTC le sehokelo sa motlakase sa lipini tse 10 se sirelelitsoeng ka diode
• Tšebeliso ea hajoale: <120 mA (w/o headphones), <190 mA (w/headphones to max)
• Botebo (ho hoketsoe thapo ea matla): 29 mm
• Kenyelletso ea ho kenya: 100 kΩ
• Khumo impedance: 220 Ω
• Khatello ea li-headphone: 8–250 Ω

LIEKETSENG

BASTL-INSTRUMENT-SCiao-Eurorack-Audio-Output-Module-fig7

B-TOKELO E KA TLOAELEHANG HO TLOHA B-LE-TEMELA KAPA A-TOKELETSO

BAKENG SA HO THAOA BONABISO THE
MELA E LE SENG E EMETSA KA BOBELI L LE R.

Ciao!! e na le phallo e otlolohileng ea lets'oao. E nka likenyelletso ho tsoa ho liteishene tsa A le B, e li kokobetsa ka knob ea boemo ho ea boemong ba line, ebe e li hlahisa ka liphetho tsa mocha. Sephetho sa li-headphone se na le switch bakeng sa ho khetha mocha oo u o mametseng, hape ho na le switjha ea MIX ho kopanya Channel B ho Channel A. Lintho tse kenang li entsoe ka bohlale ho etsa hore ho be bonolo ho etsa matšoao a mono. Sheba karolo ea Inputs bakeng sa lintlha tse ling.

MOEKETSI

1. A IN Channel LEFT A IN e tloaeleha ho LETSA A IN. Sena se bolela hore ntle le haeba o hokela likanale ka bobeli, Channel A e ka letsohong le letšehali e tla kopitsoa ho Channel A e nepahetseng, e leng se hlahisang lets'oao la mono tse peli ho tsoa ho Channel A.
2. BOITUMELO LE TŠOANTŠISO Sebelisa konopo ea A (Ahoj) ho beha boemo ba lintho tse kenang ka ho le letšehali le ka ho le letona tsa Channel A. Lebone le letala ka morao ho label ea Ahoj le bontša ho ba teng ha lets'oao, ha lebone le lefubelu le bontša hore u romela melaetsa ho feta 1 Volt. , e leng tekanyetso ea molumo oa boemo ba mohala. Leha ho le joalo, HA U qhekelle ka hare ho Ciao !! mojule. Ena ke temoso feela ea hore sesebelisoa leha e le sefe sa boemo ba mohala ho theosa le ketane ea lets'oao se ka qhekella haeba se sa nyenyefatsoe ke taolo ea boemo ba ho kenya.
3. A BAL OUTS Kamora ho nyenyefatswa ke kotola ea boemo bo inehetseng, matshwao a leqele le le letona a Channel A a romelloa ho liphetho tse leka-lekaneng A BAL OUTS. Bakeng sa boiphihlelo bo monate ka ho fetesisa bo se nang lerata, sebelisa lithapo tsa TRS tse leka-lekaneng tse 6.3mm (¼”) le lintho tse kenngoeng hantle. A BAL OUTS e ka boela ea tšoara lithapo tsa mono TS. Ela hloko: Se ke oa hokela A BAL OUTS ho lisebelisoa tsa stereo, kaha sena se ka fella ka setšoantšo se kantle sa mokhahlelo oa stereo.
4. B INPUTS Channel HO TSELA B IN e tloaelehile ho ea HO HO JA B IN. Sena se bolela hore ntle le haeba o hokela liteishene ka bobeli, Channel B e ka letsohong le letšehali e tla kopitsoa ho Channel B e nepahetseng, e leng se hlahisang lets'oao la mono tse peli ho tlhahiso ea Channel B. Ka nako e ts'oanang, channel LEFT A IN e boetse e tloaelehile ho LEFT B IN, kahoo haeba u sa hokelle letho ho LEFT B IN, e tla kopitsa lets'oao le letšehali la Channel A ka lehlakoreng le letšehali la Channel B. Tlhokomeliso: Ho e-na le ho tloaeleha ho tloha LEFT B HO HO HO TSA B IN, u ka khetha HO LENG A IN e le mohloli o tloaelehileng o sebelisa jumper e ka morao ea module. Sheba mohlala oa Patchampka tlase.
5. B LEVEL Sebelisa knob ea B (Bye) ho beha boemo ba lisebelisoa tse ka ho le letšehali le tse ka ho le letona tsa Channel A. Lebone le letala ka mor'a lebokose la Bye le bontša ho ba teng ha lets'oao, ha lebone le lefubelu le bontša hore u romela melaetsa ho feta 1 Volt, ke tekanyetso ea molumo oa boemo ba mohala. Leha ho le joalo, HA U qhekelle ka hare ho Ciao !! mojule. Ena ke temoso feela ea hore sesebelisoa leha e le sefe sa boemo ba mohala ho theosa le ketane ea lets'oao se ka qhekella haeba se sa nyenyefatsoe ke taolo ea boemo ba ho kenya.
6. B OUTPUT Kamora ho nyenyefatswa ke kotola ea boemo bo inehetseng, matshwao a leqele le le letona la Channel B a romelwa ho B STOUT. Tlhahiso ena e etselitsoe ho sebelisoa ka thapo ea stereo ea 3.5mm (⅛”) ea TRS, empa e ka sebelisoa le ka li-headphones.
7.  HEADPHONE OUTPUT Hokela li-headphones ho tlhahiso ena. Sebelisa likonopo tsa boemo ba kanale ho seta lerata.
8. HEADPHONE SELECTION SWITCH Sebelisa sesebelisoa ho khetha mocha oo molumo oa li-headphone o tla mamela.
9. TSAMAISA B→ A SWITCH Ha switjha ena e le maemong a hodimo, e tla kopanya LE LETEDI LA B HO IN LE LETSATSI A KA HO HARE le KA HO TONA B HO HO HO A IN. Sena se ka sebelisoa bakeng sa ho kopanya stereo kapa bakeng sa ho mamela Channel B pele ho li-headphones (ka switch MIX sebakeng se tlase).
10. NORMALIZATION JUMPER Ka tsietsi, LEFT B IN e tloaeleha ho ea HO HO LENG B IN. Leha ho le joalo, maemong a mang, ho ka ba molemo ho etsa hore RIGHT A IN e tloaelehe hore e be RIGHT B IN ho e-na le hoo. Haeba seo ke ts'ebetso eo u e batlang, u ka tsamaisa jumper sebakeng se seng, u kopanya bohareng le lithakhisa tsa hlooho ea jumper.
11.  MIX-IN HEADERS Bakeng sa lihlooho tsa DIY: u ka sebelisa lihlooho tsena ho kopanya lipontšo tse tsoang ho li-module tse ling tsa stereo (tse kang BUDDY) ho Channel A. Ka tsela ena, u ka kopanya kakaretso ea matšoao a 3 a stereo ho Channel A.

MATLA

Pele o hokela thapo ea ribone mojuleng ona, tlosa sistimi ea hau matleng! Lekola polarity ea thapo ea ribone habeli le hore ha e ea fosahala ka nqa efe kapa efe. Mohala o mofubelu o lokela ho ts'oana le seporo sa -12V ka bobeli mojuleng le boto ea libese.

! KA KOPO, NETEFATSA KA TSE LATELANG:

•  u na le boto ea libese e tloaelehileng ea pinout euro rack
• u na le liporo tsa +12V le -12V botong ea bese ea hau
• liporo tsa motlakase ha li imetsoe ke hona joale

Leha ho na le li-circuits tsa ts'ireletso sesebelisoa sena, ha re amohele boikarabello bakeng sa ts'enyehelo e bakiloeng ke khokahano e fosahetseng ea phepelo ea motlakase. Ka mor'a hore u kopanye ntho e 'ngoe le e' ngoe, ue hlahlobe habeli, 'me u koale tsamaiso ea hau (kahoo ha ho na likhoele tsa motlakase tse ka angoang ka letsoho), bulela sistimi ea hau' me u leke mojule.

LIEKETSENG PHATALA 

MAMELA PELE HO LIHLOOHO U ka sebelisa sesebelisoa sa MIX B→A se kopane le switch ea li-headphones sebakeng sa B ho mamela pele lets'oao le kentsoeng ho B IN ho li-headphone, ha libui li hokahane le tlhahiso ea A. Fokotsa konopo ea MIX B→ A ho utloa lets'oao la B feela ka li-headphones. E fetole ho kopanya lets'oao la B ho sehlahisoa se seholo.

KELETSO QUAD LINE

Haeba u batla ho rekota likanale tse 4 u le mong, kopanya feela matšoao a 4 ho tse 4 tse fumanehang ebe u sebelisa A BAL OUTS e le liphetho tsa mela e 2 le B STOUT joalo ka mela e meng e 2. Sheba boemo ba li-switches ka bobeli.

KELETSO QUAD LINE

PUSELETSO STEREO FX

 

Seteishene sa B se ka sebelisoa ho kopanya habonolo lets'oao la stereo le lets'oao la stereo la Channel A. Sena se na le thuso haeba u sebelisa motsoako o ka tlase e le motsoako o romellang ox ho yuniti ea litlamorao (ebang ke ka rack kapa kantle). B IN, hammoho le konopo ea taolo ea boemo ba mocha oa B, e ka sebelisoa e le pina ea ho khutla ea stereo FX.

Haeba u batla ho rekota likanale tse 4 u ikemetse, kopanya feela matšoao a 4 ho tse 4 tse fumanehang ebe u sebelisa liphetho tsa mela ea A BAL OUTSas 2 le B STOUT joalo ka liphetho tse ling tse 2. Sheba boemo ba li-switches ka bobeli.

PUSOTHO E LE SENG EA STEREO, OUTPUT EA DUAL HEADPHONE Sebelisa B STOUT e le sesebelisoa sa bobeli sa li-headphones bakeng sa maemo a thuto kapa ho bapala le motsoalle ka li-headphones.

• Hokela lets'oao la hau la stereo ho A IN.
• Fetolela switch ea li-headphone ho ea sebakeng sa A.
• Fokotsa konopo ea MIX B→ A fatše.
• Hokela para e le 'ngoe ea li-headphones ho tsoa ho li-headphones ka boemo bo laoloang ke A knob.
• Hokela para ea bobeli ea li-headphones ho B STOUT ka boemo bo laoloang ke B knob.

Hlokomela: jumper e ka morao e tlameha ho behoa sebakeng sa A-RIGHT bakeng sa ho tloaeleha ha stereo.

KENYA E LE NNGWE TSA STEREO, AROHANG LIMOR'A LIHLOOHO, LE BOLIMO EA SEBUI

• Hokela lets'oao la hau la stereo ho A IN.
• Fetolela switch ea li-headphone ho ea sebakeng sa B.
• Fokotsa konopo ea MIX B→ A fatše.
• Hokela libui ho A BAL OUTS ka boemo bo laoloang ke knob ea A.
• Hokela li-headphones ho sephetho sa li-headphone ka boemo bo laoloang ke B knob.

Hlokomela: jumper e ka morao e tlameha ho behoa sebakeng sa A-RIGHT bakeng sa ho tloaeleha ho nepahetseng ha stereo.

TSAMAISO: John Dinger
MORALO OA LITS'OANTS'O: Anymade Studio Mohopolo o fetohile oa sebele ka lebaka la bohle ba Bastl Instruments le ka lebaka la tšehetso e kholo ea balateli ba rona.

www.bastl-instruments.com

Litokomane / Lisebelisoa

LITLHAKISO TSA BASTL Ciao Eurorack Audio Output Module [pdf] Bukana ea Mosebelisi Ciao Eurorack Audio Output Module, Ciao, Eurorack Audio Output Module, Audio Output Module, Output Module, Module

Litšupiso

• Bukana ea Mosebelisi