CA7024
FAULT MAPPER CABLE LENGTH METER LE FAULT LOCATOR
Bukana ea Mosebelisi
Polelo ea Boikamahanyo
Chauvin Arnoux® , Inc. dba AEMC® Instruments e tiisa hore sesebelisoa sena se lekantsoe ho sebelisoa litekanyetso le lisebelisoa tse ka lateloang ho latela maemo a machaba.
Re netefatsa hore nakong ea ho romella sesebelisoa sa hau se fihletse lintlha tsa sona tse hatisitsoeng.
Nako e khothaletsoang ea ho lekanya sesebelisoa sena ke likhoeli tse 12 'me e qala ka letsatsi leo moreki a le fumanang ka lona. Bakeng sa ho nchafatsa, ka kopo sebelisa lits'ebeletso tsa rona tsa calibration. Sheba karolo ea rona ea ho lokisa le ho lekanya ho www.aemc.com.
Lethathamo la #: __________
Lethathamo #: 2127.80
Setšoantšo sa CA7024
Ka kopo, tlatsa letsatsi le nepahetseng joalo ka ha ho boletsoe:
Letsatsi la ho Fumana: ________
Letsatsi le Lekanyelitsoeng: _____
LIEKETSENG
TLHOKOMELO
- Sesebelisoa sena se kopana le litlhoko tsa polokeho tsa IEC610101:1995.
- Model CA7024 e etselitsoe ho sebelisoa lipotolohong tse felloang matla feela.
- Khokahano moleng voltage tla senya sesebelisoa mme e ka ba kotsi ho motho ea sebetsang.
- Sesebelisoa sena se sirelelitsoe khahlano le khokahano ea marang-rang a telecom voltagHo latela EN61326-1.
- Tšireletseho ke boikarabello ba motho ea sebetsang.
1.1 Matšoao a Motlakase a Machaba
Letšoao lena le bolela hore sesebelisoa se sirelelitsoe ka ho pata habeli kapa ho matlafatsoa.
Letšoao lena seletsa se bontša a TLHOKOMELO le hore mosebeletsi o tlameha ho sheba bukana ea mosebelisi bakeng sa litaelo pele a sebelisa sesebelisoa. Bukeng ena, letšoao la litaelo tse tlang pele li bontša hore haeba litaelo li sa lateloe, kotsi ea 'mele, tlhomamisoample le sehlahisoa se ka baka tšenyo.
Kotsi ea ho tsosoa ke motlakase. Molumotage likarolong tse tšoailoeng ka letšoao lena e ka ba kotsi.
1.2 Ho Fumana Thomelo ea Hao
Ha u fumana thomello ea hau, etsa bonnete ba hore litaba tse ka hare li lumellana le lenane la ho paka. Tsebisa morekisi oa hau ka lintho tse sieo. Haeba thepa e bonahala e senyehile, file tleleime hang-hang le mofani oa thepa le ho tsebisa mofani oa hau hang-hang, ho fana ka tlhaloso e qaqileng ea tšenyo leha e le efe. Boloka setshelo sa ho paka se senyehileng ho tiisa tleleime ya hao.
1.3 Kapa ho fana ka lintlha
Fault Mapper Model CA7024…………………………………………Katse. #2127.80
E kenyelletsa meter, mokotla o jereng, BNC pigtail e nang le likotoana tsa alligator, libeteri tsa 4 x 1.5V AA, bukana ea mosebelisi le karete ea tiisetso ea sehlahisoa.
1.3.1 Lisebelisoa le Likarolo tse Felletseng
Moamoheli oa Molumo / Mohlala oa Cable Tracer TR03 …………………….Katse. #2127.76
LIEKETSENG LIHLAHISO
2.1 Tlhaloso
The Fault Mapper ke e tšoaroang ka letsoho, Alpha-Numeric, TDR (Time Domain Reflectometer) Cable Length Meter le Fault Locator, e etselitsoeng ho lekanya bolelele ba likhoele tsa matla le tsa puisano kapa ho bontša sebaka sa phoso ho thapo, ho fuoa phihlello. ho isa pheletsong e le 'ngoe feela.
Ka ho kenyelletsa Fast-Edge Step TDR Technology, Fault Mapper e lekanya bolelele ba thapo mme e bonts'a sebaka sa ho bula kapa liphoso tsa potoloho e khuts'oane, ho isa ho 6000 ft (2000m) bonyane li-conductors tse peli.
Fault Mapper e bonts'a bolelele ba thapo kapa sebaka sa phoso le tlhaloso ea alpha-nomoro ho LCD ea Graphical ea 128×64.
Laeborari ea ka hare ea mefuta e tloaelehileng ea li-cable e thusa ho lekanya ka nepo ntle le tlhokahalo ea ho kenya tlhahisoleseling ea Velocity of Propagation (Vp), mme Fault Mapper e lefella li-impedans tse fapaneng tsa cable.
Fault Mapper e kenyelletsa jenereithara ea molumo o oscillating, e bonoang ka mohala o tloaelehileng oa mohala oa mohala, bakeng sa ho sebelisoa ha ho lateloa le ho khetholla lipara tsa cable.
Yuniti e boetse e bonts'a "Voltag"Temoso e fumanoeng" mme e lla alamo ha e hokahantsoe le thapo e matlafalitsoeng ke ho feta 10V, e thibelang liteko.
Likaroloana:
- Metara ea bolelele ba cable e ts'oaroang ka letsoho le sebaka sa ho fumana phoso
- E lekanya bolelele ba thapo mme e bonts'a sebaka sa ho bula kapa liphoso tsa potoloho e khuts'oane ho isa ho 6000 ft (2000m)
- E bonts'a bolelele ba cable, sebaka se fosahetseng le tlhaloso, alpha-numerically
- E hlahisa molumo o utloahalang o sebelisetsoang ho latela mohala le ho tseba hore na phoso ke ea mofuta ofe
- E bonts'a "Voltage Fumana” le molumo oa temoso ha > 10V e le teng ho s e lekiloengample
2.2 Likarolo tsa Fault Mapper
- Sehokelo sa ho kenya BNC
- Alpha-Numeric LCD
- Konopo ea ho fokotsa Vp (Velocity of Propagation).
- Teko / konopo ea ho khetha mosebetsi
- Konopo ea backlight
- Vp (Velocity of Propagation) konopo ea increment
- Konopo ea ho khetha mokhoa (TDR kapa Tone Tracer)
- Konopo ea ho ON/OFF
LIEKETSENG TS'OANELO
| Boemo @ Vp=70%: Qeto (m): Qeto (ft): Ho nepahala*: Bonyane Bolelele ba Cable: Library ea Cable: Vp (Lebelo la Phatlalatso):Output Pulse: Tšitiso ea Liphetho: Pulse ea Output: Qeto ea Pontšo: Hlahisa Backlight: Tone jenereithara: Moqtage Temoso: Mohloli oa Matla: Iketsetse: Mocheso oa polokelo: Thempereichara ea ho sebetsa: Altitude: Boholo: Boima ba 'mele: Tšireletseho: Lenane la Tšireletso: EMC: CE: |
6000 ft (2000m) 0.1 m ho fihla ho 100 m, ebe 1 m 0.1 ft ho fihla ho 100 ft, ebe 1 ft ±2% ea ho Bala 12 ft (4m) E hahelletsoeng E ka fetoloa ho tloha ho 0 ho isa ho 99% 5V tlhōrō-to-tlhoro ho potoloho e bulehileng Matšeliso a iketsang Mosebetsi oa Mohato oa Nanosecond LCD ea setšoantšo sa 128 x 64 pixels Electroluminescent Molumo oa oscillating 810Hz - 1110Hz Lintho tse susumetsang @ >10V (AC/DC) 4 x 1.5V AA libeteri tsa alkaline Kamora metsotso e 3 -4 ho isa ho 158°F (-20 ho isa ho 70°C) 5 ho isa ho 95% RH e sa fokotseng 32 ho isa ho 112°F (0 ho isa ho 40°C) 5 ho isa ho 95% RH e sa fokotseng 6000 ft (2000m) max 6.5 x 3.5 x 1.5” (165 x 90 x 37mm) 12 oz (350g) IEC61010-1 EN 60950 IP54 EN 61326-1 Ho latela litaelo tsa hajoale tsa EU |
* Ho nepahala ha tekanyo ea ± 2% ho nka setlhophiso sa lisebelisoa bakeng sa lebelo la ho phatlalatsoa (Vp) ea cable tlas'a teko e lokelang ho behoa ka nepo, le homogeneity ea velocity of propagation (Vp) hammoho le bolelele ba cable.
Litlhaloso li ka fetoha ntle le tsebiso.
TS'EBETSO
4.1 Melao-motheo ea Ts'ebetso
Fault Mapper e sebetsa ka ho lekanya nako e nkuoeng hore lets'oao le fihle pheletsong e hole ea thapo e lekiloeng, kapa phosong e mahareng le ho khutla.
Lebelo leo pontšo e tsamaeang ka lona, kapa Velocity of Propagation (Vp), e tla itšetleha ka litšobotsi tsa mohala.
E ipapisitse le Vp e khethiloeng le nako e lekantsoeng ea maeto ea lebelo la teko, Fault Mapper e lekanya le ho bonts'a sebaka.
4.2 Ho Nepaha le lebelo la Phatlalatso (Vp)
Fault Mapper e lekanya bohole ho ea ho liphoso le bolelele ba cable ho isa ho ± 2%.
Ho nepahala ha tekanyo ena ho ipapisitse le boleng bo nepahetseng ba Vp e sebelisoang bakeng sa thapo e tlas'a teko, le homogeneity ea Vp ho latela bolelele ba thapo.
Haeba Vp e behiloe ka tsela e fosahetseng ke opareitara, kapa Vp e fapana ka bolelele ba cable, joale liphoso tse eketsehileng li tla etsoa 'me ho nepahala ha tekanyo ho tla ameha.
Sheba § 4.9 bakeng sa ho beha Vp.
HLOKOMELA: Vp ha e hlalosoe hantle ka thapo e sa sirelelitsoeng ea li-multi-conductor, ho kenyeletsoa thapo ea matla, 'me e tlase ha thapo e lemetse ka thata moqomong ho feta ha e kentsoe ka mokhoa oa mola.
4.3 Ho Qala
Sesebelisoa se buloa le ho tima ka konopo e tala ea matla 
, e fumanoang ka lehlakoreng le ka tlaase le letona la phanele e ka pele. Ha yuniti e qala ho buloa e tla bonts'a skrine e buloang e fanang ka mofuta oa software, mofuta oa cable o khethiloeng hajoale / Velocity of Propagation, le matla a betri a setseng.
4.4 Mokhoa oa ho seta
Tšoara TDR 
konopo, ebe o tobetsa TEST 
konopo ho kenya Seta-up mode.
- Melato e ka hlophisoa ho Maoto kapa Limithara
- Lipuo li ka hlophisoa ho: Senyesemane, Français, Deutsch, Español kapa Italiano
- Laeborari e hlophisehileng ea mosebelisi e teng ho boloka litlhophiso tse 15 tse ikhethileng
- Phapang ea pontšo e ka fetoloa
Tobetsa TEST konopo ho tsamaisa mokhethoa oa mohala (>) tlase skrineng.
Tobetsa Vp 
kapa vp konopo ho fetola maemo a mola o khethiloeng.
Tobetsa TDR konopo hape ho boloka liphetoho le ho tsoa mokhoa oa ho seta.
HLOKOMELA: Ha Fault Mapper e tingoa, e tla hopola maemo a hajoale a ho seta. Tšobotsi ena e na le thuso boemong boo opereishene e etsang liteko tse ngata ka mofuta o tšoanang oa cable.
4.5 Ho etsa Lenaneo la Sebaka sa Laeborari e Tloaelehileng
Ho hlophisa sebaka sa pokello ea libuka, kenya mokhoa oa ho Seta (sheba § 4.4).
Tobetsa TEST konopo ho khetha Edit Library; khetho ea mola (>) e lokela ho ba ho Edit Library.
Tobetsa Vp kapa vp konopo ho kenya mokhoa oa ho etsa laebrari.
- Setšoantšo sa CA7024 se tla bonts'a sebaka sa pele sa cable se ka khonehang laebraring.
- Sebaka sa fektheri bakeng sa sebaka ka seng ke Custom Cable X e nang le Vp = 50%, moo X e leng sebaka sa 1 ho ea ho 15.
Tobetsa Vp kapa vp konopo ho khetha sebaka sa thapo ho lenaneo.
E latelang, tobetsa TEST kenya konopo ea Khetha Character mode.
- Motsu o tla supa tlhaku ea pele.
- Litlhaku tse leshome le metso e mehlano li teng bakeng sa ho reha mabitso ka mohala.
Tobetsa Vp kapa vp konopo ho tsamaisetsa khesa ho leqele kapa ho le letona ka tatelano. Hang ha tlhaku e lakatsehang e khethiloe, tobetsa TEST konopo ho kenya mokhoa oa Edit Character.
E latelang, tobetsa Vp kapa vp konopo ea ho fetola sebopeho sebakeng sa khetho.
Litlhaku tse fumanehang bakeng sa sebaka ka seng ke:
Ha ho letho! “ # $ % &' ( ) * + , – . / 0 1 2 3 4 5 6 7 8 9 :; <=> ? @ ABCDEFGHIGJLMNOPQRSTU VWXYZ [ \ ] ^ _ abcdefgh I jklmnopqrstuvwxyz
Ha tlhaku e batloang e khethiloe, tobetsa TEST konopo ho ea ho tlhaku e latelang ho e hlophisa.
Kamora hore tlhaku ea ho qetela e khethoe, tobetsa TEST konopo hape ho tsamaisa sesupa ho phetoho ea VP. E latelang, tobetsa Vp kapa vp konopo ea ho eketsa kapa ho fokotsa Vp, ha ho hlokahala, bakeng sa mofuta oa cable.
Ha khetho ea Vp e phethiloe, tobetsa TDR konopo ea ho khutlela ho Select Character mode le lekhetlo la bobeli ho khutlela ho Khetha mokhoa oa Cable. Joale u ka hlalosa thapo e 'ngoe bakeng sa laeborari kapa u tobetse TDR konopo kgetlo la boraro ho kgutlela skrineng sa ho seta se seholo. Ho tobetsa TDR konopo hape, ka nako ena, e tla tsoa ho Set-up mode.
4.6 Leseli la morao
Lebone la backlight le butsoe le ho tima le 
konopo.
4.7 Jenereithara ea molumo
Fault Mapper e ka boela ea sebelisoa e le jenereithara ea molumo, ho latela le ho tseba lithapo le lithapo. Mosebelisi o tla hloka mohala oa mohala oa mohala, joalo ka AEMC Tone Receiver/Cable Tracer Model TR03 (Cat. #2127.76) kapa e lekanang le eona.
Ho tobetsa TDR / konopo e tla kenya molumo oa warbling (oscillating) ka har'a thapo kapa sehokelo tlas'a teko. Ha e setiloe, tse latelang li tla hlaha:
HLOKOMELA: Ts'ebetso ea ho tima e koetsoe ka mokhoa oa Tone Generator, e le hore molumo o ka kengoa thapo nako e telele ha ho lateloa ho ntse ho etsahala.Sheba §4.11 bakeng sa ho hokela thapo ho Fault Mapper
4.8 Voltage Temoso ea Tšireletseho (Live Sample)
Fault Mapper e etselitsoe ho sebetsa feela ka lithapo tse se nang matla.
TLHOKOMELISO: Haeba Fault Mapper e hoketsoe ka phoso thapo e nang le voltage kholo ho feta 10V, molumo oa temoso o tla hlahisoa, tlhahlobo e tla thibeloa, 'me pontšo ea temoso e bontšitsoeng ka tlase e tla hlaha.Boemong bona opareitara e lokela ho hakolla Fault Mapper hanghang thapong.
4.9 Ho Khetheha le ho Lekanya Maemo a Vp
Velocity of Propagation (Vp) boleng ke tšobotsi ea mofuta o mong le o mong oa cable le mofuta.
Vp e sebelisetsoa ho lekanya bolelele ba mohala le ho lekanya sebaka se nang le phoso. Ha Vp e nepahetse haholoanyane, sephetho sa tekanyo se tla nepahala haholoanyane.
Moetsi oa li-cable a ka thathamisa Vp leqepheng la lintlha tsa bona kapa a ka khona ho fana ka eona ha a botsoa. Ka linako tse ling boleng bona ha bo fumanehe habonolo, kapa mosebelisi a ka lakatsa ho bo tseba ka ho khetheha ho lefella mefuta ea li-cable batch kapa lisebelisoa tse khethehileng tsa cable.
Sena se bonolo haholo:
- Nka cable sample bolelele ba increments hantle (ft kapa m) bolelele ho feta 60ft (20m).
- Lekanya bolelele bo nepahetseng ba thapo ka ho sebelisa tepi tekanyo.
- Hokela ntlha e le 'ngoe ea thapo ho Fault Mapper (bona § 4.11). Tlohela qetello e sa khaotse 'me u etse bonnete ba hore lithapo ha li khutsufatsoe ho tse ling.
- Lekanya bolelele 'me u lokise Vp ho fihlela bolelele bo tobileng bo bontšoa.
- Ha bolelele bo nepahetseng bo bonts'oa, Vp e thehiloe.
4.10 Ho Khetha Mohala oa Laebrari kapa Ho Seta Vp
Tobetsa Vp le Likonopo tsa Vp ho ea holimo le tlase ho laebrari.
4.10.1 Laeborari ea Lithapo
| Mofuta oa Cable | Vp (%) 47 |
Z (0) |
| AIW 10/4 | 50 | |
| AIW 16/3 | 53 | 50 |
| Alarm Belden | 62 | 75 |
| Alamo M/Core | 59 | 75 |
| Alum&lex XHHW-2 | 57 | 50 |
| Belden 8102 | 78 | 75 |
| Belden 9116 | 85 | 75 |
| Belden 9933 | 78 | 75 |
| LIKAKATSENG STP | 72 | 100 |
| CATS UTP | 70 | 100 |
| Cirtex 12/2 | 65 | 50 |
| Coax Air | 98 | 100 |
| Coax Air Space | 94 | 100 |
| Coax Foam PE | 82 | 75 |
| Coax E tiileng PE | 67 | 75 |
| Kolone 14/2 | 69 | 50 |
| CW1308 | 61 | 100 |
| Eketsehile 10/3 | 65 | 50 |
| Eketsehile 12/3 | 67 | 50 |
| Eketsehile HHW-2 | 50 | 50 |
| Ethernet 9880 | 83 | 50 |
| Ethernet 9901 | 71 | 50 |
| Ethernet 9903 | 58 | 50 |
| Ethernet 9907 | 78 | 50 |
| Kakaretso 22/2 | 67 | 50 |
| Mofuta oa 3 oa IBM | 60 | 100 |
| Mofuta oa 9 oa IBM | 80 | 100 |
| SWA e kholo | 58 | 25 |
| Multicore PVC | 58 | 50 |
| RG6/U | 78 | 75 |
| RG58 (8219) | 78 | 50 |
| RG58 C/U | 67 | 50 |
| RG59 B/U | 67 | 75 |
| RG62 A/U | 89 | 100 |
| Romex 14/2 | 66 | 25 |
| Stabiloy XHHW-2 | 61 | 100 |
| Telco Cable | 66 | 100 |
| BS6004 | 54 | 50 |
| Twinax | 66 | 100 |
| URM70 | 69 | 75 |
| URM76 | 67 | 50 |
Haeba thapo e tla lekoa e sa thathamisoa laebraring, kapa ho hlokahala Vp e fapaneng, tsoela pele ho tobetsa Vp. konopo, ho feta bokaholimo ba laebrari.
Vp e tla bontšoa ka boleng, e ka khethoang ho tloha 1 ho ea ho 99%. Haeba boleng ba Vp bo sa tsejoe, bona § 4.9.
HLOKOMELA: Ha Fault Mapper e tingoa, e tla hopola Cable Library ea ho qetela e khethiloeng kapa Vp setting. Tšobotsi ena e na le thuso boemong boo opereishene e etsang liteko tse ngata ka mofuta o tšoanang oa cable.
4.11 Ho hokela Cable ho Fault Mapper
- Etsa bonnete ba hore ha ho na phepelo ea motlakase kapa thepa e hoketsoeng thapong e lokelang ho hlahlojoa.
- Hlahloba hore na ntlha e hole ea thapo e butsoe kapa e khuts'oane (ha e ea kengoa ka mokhoa o thibelang).
- Hokela Fault Mapper pheletsong e 'ngoe ea thapo hore e lekoe.
Sehokelo sa cable se sebelisa sehokelo sa BNC se kaholimo ho yuniti.
Bakeng sa lithapo tse sa khaotseng sebelisa sekhomaretsi sa li-alligator se fanoeng.
Coaxial Cable: Hokela sekotwana sa Black ho terata e bohareng le sekotwana se Sefubelu ho thebe/skrine.
Shielded Cable: Hokela sekotwana sa Black ho terata e bapileng le thebe le sekotwana se Sefubelu ho thebe.
Twisted Pair: Arola para e le 'ngoe 'me u kopanye likarolo tse khubelu le tse ntšo ho lithapo tse peli tsa para.
Multi-conductor Cable: Hokela likarolo ho lithapo life kapa life tse peli.
4.12 Ho lekanya Bolelele ba Cable kapa Bohole ba Phoso
- Khetha mofuta oa cable ho tloha laebraring (bona § 4.10) kapa khetha cable Vp (sheba § 4.9) 'me u khomarele mohala o tla lekoa joalokaha ho hlalositsoe pele ho § 4.11.
- Tobetsa TEST / konopo.
Ho nka hore ha ho na li-opens kapa li-shorts ka har'a cable, bolelele ba mohala bo tla bontšoa.
Bakeng sa bolelele bo ka tlase ho 100ft, boleng bo bonts'itsoeng e tla ba sebakeng se le seng sa decimal.
Bakeng sa bolelele bo fetang 100ft sebaka sa decimal se hateletsoe.
Haeba ho na le nako e khutšoanyane qetellong ea mohala kapa ka nako e itseng haufi le mohala, joale pontšo e tla bontša sebaka se khuts'oane.
TLHOKOMELO
5.1 Ho fetola betri
Hakolla sesebelisoa ho thapo efe kapa efe kapa sehokelo sa marang-rang.
- TLOTSA seletsa.
- Lokolla li-screws tse peli 'me u tlose sekoaelo sa kamore ea betri.
- Fetola libeteri ka libeteri tse 4 x 1.5V AA tsa alkaline, u shebile polarities.
- Kenya sekoahelo sa lekareche la betri hape.
5.2 Ho hloekisa
Hakolla sesebelisoa mohloling ofe kapa ofe oa motlakase.
- Sebelisa lesela le bonolo hanyenyane dampe kentsoeng ka metsi a sesepa.
- Hlatsoa ka papatsoamp lesela ebe o omella ka lesela le ommeng.
- U se ke ua fafatsa metsi ka ho toba holim'a sesebelisoa.
- U se ke ua sebelisa joala, solvents kapa hydrocarbons.
5.3 Polokelo
Haeba sesebelisoa se sa sebelisoe ka nako e fetang matsatsi a 60, ho kgothaletswa ho tlosa libeteri le ho li boloka ka thoko.
Ho lokisa le ho lekanya
Ho etsa bonnete ba hore sesebelisoa sa hau se kopana le lintlha tsa feme, re khothaletsa hore se hlophisoe ho khutlela Setsing sa rona sa Ts'ebeletso sa feme ka nako ea selemo se le seng bakeng sa ho nchafatsoa, kapa joalo ka ha ho hlokoa ke litekanyetso tse ling kapa mekhoa ea kahare.
Bakeng sa ho lokisa le ho lekanya lisebelisoa:
O tlameha ho ikopanya le Setsi sa rona sa Tshebeletso bakeng sa Nomoro ya Tumello ya Tshebeletso ya Bareki (CSA#). Sena se tla etsa bonnete ba hore ha sesebelisoa sa hau se fihla, se tla lateloa le ho sebetsoa hang-hang. Ka kopo, ngola CSA# ka ntle ho sejana sa thepa.
Sekepe ho ea: Chauvin Arnoux® , Inc. dba AEMC® Instruments
15 Faraday Drive
Dover, NH 03820 USA
Mohala: 800-945-2362 (Ext. 360)
603-749-6434 (Ext. 360)
Fax: 603-742-2346 or 603-749-6309 E-mail: repair@aemc.com
(Kapa ikopanye le mophatlalatsi oa hau ea lumelletsoeng)
Litšenyehelo tsa ho lokisa le ho lekanya maemo li teng.
HLOKOMELA: O tlameha ho fumana CSA # pele o khutlisa sesebelisoa leha e le sefe.
Thuso ea Theknoloji le Thekiso
Haeba u na le mathata afe kapa afe a tekheniki, kapa u hloka thuso efe kapa efe ka ts'ebetso e nepahetseng kapa ts'ebeliso ea sesebelisoa sa hau, ka kopo letsetsa, romella lengolo-tsoibila, fekse kapa e-mail ho sehlopha sa rona sa ts'ehetso ea tekheniki:
Chauvin Arnoux® , Inc. dba AEMC® Instruments 200 Foxborough Boulevard Foxborough, MA 02035 USA
Mohala: 800-343-1391
508-698-2115
Fax: 508-698-2118
E-mail: techsupport@aemc.com
www.aemc.com
HLOKOMELA: Se ke oa romella lisebelisoa ho aterese ea rona ea Foxborough, MA.
NGOLISA Marang-rang HO:
www.aemc.com
Litokiso tsa Tiisetso
Seo u lokelang ho se etsa ho khutlisa Sesebelisoa sa Tokiso ea Tiisetso:
Pele, kopa Nomoro ea Tumello ea Tšebeletso ea Bareki (CSA#) ka mohala kapa ka fekse ho tsoa Lefapheng la rona la Tšebeletso (sheba aterese e ka tlase), ebe u khutlisetsa sesebelisoa hammoho le Foromo ea CSA e saennoeng. Ka kopo, ngola CSA# ka ntle ho sejana sa thepa. Khutlisetsa sesebelisoa, postage kapa thomello e lefelletsoe esale pele ho:
Romella ho: Chauvin Arnoux® , Inc. dba AEMC® Lisebelisoa
15 Faraday Drive • Dover, NH 03820 USA Phone: 800-945-2362 (Ext. 360) 603-749-6434 (Ext. 360) Fax: 603-742-2346 or 603-749-6309
E-mail: repair@aemc.com
Tlhokomeliso: Ho itšireletsa khahlanong le tahlehelo ea leetong, re khothaletsa hore o insure thepa ea hau e khutlisitsoeng.
HLOKOMELA: O tlameha ho fumana CSA # pele o khutlisa sesebelisoa leha e le sefe.
03/17
99-MAN 100269 v13
Chauvin Arnoux® , Inc. dba AEMC® Lisebelisoa
15 Faraday Drive • Dover, NH 03820 USA • Mohala: 603-749-6434 • Fax: 603-742-2346
www.aemc.com
Litokomane / Lisebelisoa
 |
AEMC INSTRUMENTS CA7024 Fault Mapper Cable Length Meter le Fault Locator [pdf] Bukana ea Mosebelisi CA7024 Fault Mapper Cable Length Meter le Fault Locator, CA7024, Fault Mapper Cable Length Meter le Fault Locator, Cable Length Meter le Fault Locator, Length Meter le Fault Locator, Fault Locator, Locator |