GENIE KP2 Universal Intellicode Keypad

WARNING

WARNING

PINTU Pindhah bisa nyebabake cilaka utawa mati sing serius. AJA nginstal pemancar (keypad) kajaba piranti keamanan operator lawang bisa digunakake kaya sing dibutuhake manual operator lawang. Konsol Tembok kudu dipasang ing ngarep lawang, paling sethithik 5 kaki ing ndhuwur lantai lan adoh saka bagean lawang sing obah. Tansah wong mbukak nalika lawang obah. ORA nganti bocah dolanan karo pemancar utawa operator lawang. Yen mbalikke safety ora bisa digunakake kanthi bener: Nutup lawang banjur copot bukaan nganggo gagang release manual. AJA nggunakake operator pemancar utawa lawang. Waca Manual Pamilik Pintu lan Pembuka Lawang sadurunge nyoba ndandani.

ngerti sadurunge sampeyan miwiti

• 'Opener' nuduhake piranti sing dipasang ing langit-langit utawa tembok cedhak bar spring lawang garasi.
• Rampungake program sadurunge masang keypad.
• Papan tombol tetep murup lan aktif sajrone 15 detik sawise entri PIN sukses. Pencet tombol apa wae bakal ngaktifake pambuka sajrone wektu kasebut.
• Pencet tombol 7 & 9 bebarengan kanggo langsung mungkasi urutan lan mateni lampu latar.
• Model GK2-R holds 3 PINs total. Model GK2-P holds 6 PINs total.

PIN PROGRAM kanggo mbukak

1. Copot tab baterei saka kompartemen baterei.
2. ON OPENER: Find button pad to begin programming mode.
   • If you have a program (PRGM) or SET button (1), press and hold down until the LED turns blue, then release. The purple LED begins flashing.
   • If you have a LEARN CODE button (2), press and hold down until the red LED begins flashing, then release.
     CATETAN: Jendhela programing metu ing 30 detik.
     
3. ON KEYPAD: Press and hold (STAR key) until green LED lights (@ 5 sec or less), then release. LED begins flashing.
4. ON KEYPAD: Enter desired PIN (3-8 digits) and, with keypad at arms length away from opener, press UP/DOWN key once every two seconds until the opener operates. (Program window ends 15 seconds after last button press).
5. Sawise lampu latar dipateni, TEST PIN kanggo ngrampungake persiyapan.
   • Programming a single garage door opener is complete. For additional openers, repeat above steps for each.

OPERASI UMUM

1. Ketik PIN saiki lawang sing dipilih.
2. Pencet lan culake tombol UP/DOWN. Opener bakal operate.

MOUNTING KEYPAD

Keypad MUST be mounted within sight of the garage door (s) at least 5 feet above floor and clear of any moving door parts.

1. Copot tutup batere lan batere.
   
2. Bor bolongan pilot 3/32 "kanggo sekrup sing dipasang ing ndhuwur.
3. Pasang sekrup sing kalebu ing bolongan pilot, ninggalake 1/8 "celah antarane sirah sekrup lan tembok.
4. Pancing slotted Gunung ing mburi keypad liwat meneng.
   
5. Tandhani lan pengeboran bolongan pilot 3/32 "kanggo sekrup ngisor lan kencengake tombol menyang tembok. (Aja kenceng banget).
6. Pasang maneh baterei.
   

FITUR TAMBAHAN & SETTINGS

Ganti PIN sing ana:

1. Ketik PIN saiki lawang sing dipilih.
2. Press and hold (STAR key) until red LED flashes (@ 5 sec), then release.
3. Ketik PIN anyar kanggo lawang sing dipilih (3-8 digit).
4. Press and release (STAR key) one time. LED flashes two times to confirm.
   • PIN has been changed and previous PIN will no longer operate the opener.

Setel PIN sementara:

1. Ketik PIN saiki lawang sing dipilih.
2. Press and hold the (STAR key) until green LED turns SOLID (@ 10 sec), then release.
3. Ketik PIN TEMPORARY (3-8 digit).
4. Press and release (STAR key) one time. LED flashes two times to confirm.
   • Temporary PIN is active until the existing PIN is used again.

Mbusak siji PIN sekaligus:

1. Press and hold (STAR key) until red LED flashes (@ 10 sec), then release.
2. Ketik PIN sing pengin dibusak.
3. Press and release (STAR key) one time. LED flashes two times to confirm.
   • This PIN has been cleared from the keypad.

Busak kabeh PIN lan setelan:

1. Press and hold (STAR key) until red LED turns SOLID (@ 20 sec), then release. LED flashes two times to confirm.
   • Keypad is reset to factory default.

1-Fitur nutup tombol:

Fitur iki bisa digunakake ing openers digawe Juli 2025 utawa mengko. Yen tombol UP/DOWN dipencet nalika lampu latar keypad dipateni, lawang apa wae sing durung ana ing wates mudhun bakal TUTUP. Setelan gawan ON.

Kanggo nguripake fitur ON / OFF kanggo ALL lawang, baleni proses iki:

1. Pencet terus tombol 1 & 9 bebarengan nganti LED biru sumunar.
   • If the LED flashes 4 times, the feature is off.
   • If the LED flashes 2 times, the feature is on.

Kanggo nguripake / mateni PIN, baleni proses iki:

1. Enter PIN, then press and release (STAR key) two times.
   • If the LED flashes 4 times, the feature is off.
   • If the LED flashes 2 times, the feature is on.

Fitur Lockout:

Sawise 10 PIN salah saurutan, keypad ngunci nganti 5 menit. Kanggo mulihake fungsi, ngenteni 5 menit utawa copot lan pasang maneh baterei. Setelan gawan OFF.

Kanggo ON/OFF, baleni proses iki:

1. Enter valid (non-temporary) PIN, then press and release the (STAR key) one time. Press and hold the 5 & 9 keys at the same time until blue LED flashes, then release.
   • If the LED flashes 4 times, the feature is off.
   • If the LED flashes 2 times, the feature is on.

BATERI RENDAH / GANTI BATERI

LED abang siji (utawa ora ana lampu latar) nuduhake baterei kudu diganti.
Pemrograman ora bakal ilang nalika ngganti baterei.

• Copot (2) baterei AAA lan ganti karo baterei anyar saka jinis sing padha.
  Priksa arah terminal (+) lan (-) sing bener. Baterei sing bisa diisi ulang ora dianjurake.
• Ganti baterei saben taun kanggo kinerja sing paling apik.
  

Gunakake baterei kualitas. Aja nyampur batre lawas lan anyar. Aja nyampur baterei alkalin, standar (karbon-seng), utawa bisa diisi ulang (nikel-acmium).

PERNYATAAN FCC / IC

This equipment contains licence-exempt transmitter(s)/receiver(s) that comply with Part 15 of the FCC Rules, ICES-003 Class B specifications, and ISED Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. piranti iki bisa uga ora nimbulaké gangguan mbebayani, lan.
2. piranti iki kudu nampa gangguan apa wae sing ditampa, kalebu gangguan sing bisa nyebabake operasi sing ora dikarepake.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with the RF exposure limits established by the FCC and ISED for an uncontrolled environment. Compliance with SAR requirements has been demonstrated through calculations, confirming that the RF exposure remains below the applicable threshold for use with 0 mm separation from the body.

Dhukungan pelanggan

Intellicode® Keypad

Kanggo bantuan, hubungi liwat telpon utawa websitus
Ngobrol: 1-800-354-3643
www.geniecompany.com

©2025 Perusahaan Genie
One Door Drive, Mt. Hope, OH 44660, USA
Garansi 1 taun, ngunjungi www.geniecompany.com kanggo rincian.
Pat. www.geniecompany.com

Dokumen / Sumber Daya

GENIE KP2 Universal Intellicode Keypad [pdf] Manual Pamilik KP2, KP2 Universal Intellicode Keypad, Universal Intellicode Keypad, Intellicode Keypad, Keypad

Referensi

• Manual pangguna