GENIE KP2 Universal Intellicode klaviaturasi

OGOHLANTIRISH

OGOHLANTIRISH

HARAKAT ECHIQI OG'IR JAHIYALARGA VA O'LIMGA olib kelishi mumkin. Eshik operatorining xavfsizlik moslamasi eshik operatorining yo'riqnomasida ko'rsatilganidek ishlamasa, uzatgichni (klaviatura) o'rnatmang. Devor konsoli eshik ko'rinadigan joyda, poldan kamida 5 fut balandlikda va harakatlanuvchi eshik qismlaridan uzoqda o'rnatilishi kerak. Eshik harakatlanayotganda odamlarni ochishdan saqlaning. Bolalarga transmitter yoki eshik operatori bilan o'ynashiga yo'l qo'ymang. Agar xavfsizlik orqaga qaytarish moslamasi ishlamasa: Eshikni yoping va qo'lda ochish dastagidan foydalanib ochgichni ajratib oling. Transmitter yoki eshik operatoridan foydalanmang. Ta'mirlashdan oldin, eshik va eshik ochuvchilarning qo'llanmalariga qarang.

BOSHLASHDAN OLDIN BILING

• "Ochish" garaj eshigining prujina panjarasi yaqinidagi shiftga yoki devorga o'rnatilgan qurilmani anglatadi.
• Klaviaturani o'rnatishdan oldin dasturlashni yakunlang.
• PIN-kodni muvaffaqiyatli kiritgandan so'ng klaviatura 15 soniya davomida yoniq va faol bo'lib qoladi. Har qanday tugmani bosish shu vaqt ichida ochgichni faollashtiradi.
• Bir vaqtning o'zida ketma-ketlikni tugatish va orqa yoritishni o'chirish uchun 7 va 9 tugmalarini bir vaqtning o'zida bosing.
• Model GK2-R holds 3 PINs total. Model GK2-P holds 6 PINs total.

OPENERGA DASTUR PIN-kod

1. Batareya bo'limidan batareya yorlig'ini olib tashlang.
2. ON OPENER: Find button pad to begin programming mode.
   • If you have a program (PRGM) or SET button (1), press and hold down until the LED turns blue, then release. The purple LED begins flashing.
   • If you have a LEARN CODE button (2), press and hold down until the red LED begins flashing, then release.
     ESLATMA: Dasturlash oynasi 30 soniyada tugaydi.
     
3. ON Klaviatura: Press and hold (STAR key) until green LED lights (@ 5 sec or less), then release. LED begins flashing.
4. ON Klaviatura: Enter desired PIN (3-8 digits) and, with keypad at arms length away from opener, press UP/DOWN key once every two seconds until the opener operates. (Program window ends 15 seconds after last button press).
5. Orqa yorug'lik o'chgandan so'ng, sozlashni yakunlash uchun PIN-kodni sinab ko'ring.
   • Programming a single garage door opener is complete. For additional openers, repeat above steps for each.

UMUMIY FOYDALANISH

1. Tanlangan eshikning joriy PIN kodini kiriting.
2. YUQARI/PASTGA tugmasini bosing va qo'yib yuboring. Ochuvchi ishlaydi.

Klaviaturani o'rnatish

Keypad MUST be mounted within sight of the garage door (s) at least 5 feet above floor and clear of any moving door parts.

1. Batareya qopqog'ini va batareyalarini echib oling.
   
2. Yuqori o'rnatish vidasi uchun 3/32 dyuymli burg'ulash teshigi.
3. O'rnatilgan vintni vint boshi bilan devor orasidagi 1/8 dyuymli bo'shliqni qoldirib, uchuvchi teshikka o'rnating.
4. Klaviatura orqasidagi tirqishli o'rnatishni vint ustiga ulang.
   
5. Pastki vida va klaviaturani devorga mahkamlash uchun 3/32 dyuymli teshikni belgilang va burg'ulang. (Qattiq siqmang).
6. Batareyalarni qayta o'rnating.
   

QO‘SHIMCHA XUSUSIYATLAR VA SOZLAMALAR

Mavjud PIN-kodni o'zgartiring:

1. Tanlangan eshikning joriy PIN kodini kiriting.
2. Press and hold (STAR key) until red LED flashes (@ 5 sec), then release.
3. Tanlangan eshik uchun YANGI PIN-kodni kiriting (3-8 raqam).
4. Press and release (STAR key) one time. LED flashes two times to confirm.
   • PIN has been changed and previous PIN will no longer operate the opener.

Vaqtinchalik PIN-kod o'rnating:

1. Tanlangan eshikning joriy PIN kodini kiriting.
2. Press and hold the (STAR key) until green LED turns SOLID (@ 10 sec), then release.
3. VAQTINCHI PIN-kodni kiriting (3-8 raqam).
4. Press and release (STAR key) one time. LED flashes two times to confirm.
   • Temporary PIN is active until the existing PIN is used again.

Bir vaqtning o'zida bitta PIN-kodni tozalang:

1. Press and hold (STAR key) until red LED flashes (@ 10 sec), then release.
2. O'chirmoqchi bo'lgan PIN-kodni kiriting.
3. Press and release (STAR key) one time. LED flashes two times to confirm.
   • This PIN has been cleared from the keypad.

Barcha PINS va sozlamalarni o'chirib tashlang:

1. Press and hold (STAR key) until red LED turns SOLID (@ 20 sec), then release. LED flashes two times to confirm.
   • Keypad is reset to factory default.

1-tugmachani yopish xususiyati:

Bu funksiya 2025-yil iyulida yoki undan keyingi versiyalarda ishlaydi. Klaviatura orqa yorug'ligi o'chirilganda YUQARI/PASTGA tugmasi bosilsa, pastga tushish chegarasida bo'lmagan har qanday eshik YOPILADI. Standart sozlama ON.

BARCHA eshiklar uchun funksiyani yoqish/o‘chirish uchun ushbu amalni takrorlang:

1. Moviy LED yonib-o'chmaguncha 1 va 9 tugmachalarini bir vaqtning o'zida bosib turing.
   • If the LED flashes 4 times, the feature is off.
   • If the LED flashes 2 times, the feature is on.

PIN-KOD BO'YICHA YOQISH/O'CHIRISH uchun ushbu amalni takrorlang:

1. Enter PIN, then press and release (STAR key) two times.
   • If the LED flashes 4 times, the feature is off.
   • If the LED flashes 2 times, the feature is on.

Qulflash xususiyati:

PIN-kodni ketma-ket 10 ta noto'g'ri urinishdan so'ng, klaviatura 5 daqiqaga qulflanadi. Funktsiyani tiklash uchun 5 daqiqa kuting yoki batareyalarni chiqarib oling va qayta joylashtiring. Birlamchi sozlama OFF.

ON/OFFni yoqish uchun ushbu amalni takrorlang:

1. Enter valid (non-temporary) PIN, then press and release the (STAR key) one time. Press and hold the 5 & 9 keys at the same time until blue LED flashes, then release.
   • If the LED flashes 4 times, the feature is off.
   • If the LED flashes 2 times, the feature is on.

LOW BATTERY/BATTERY REPLACEMENT

Bitta qizil LED (yoki orqa yorug'lik yo'q) batareyalarni almashtirish kerakligini ko'rsatadi.
Batareyani almashtirish paytida dasturlash yo'qolmaydi.

• (2) AAA batareyalarini chiqarib oling va bir xil turdagi yangi batareyalar bilan almashtiring.
  (+) va (-) terminallarining to'g'ri yo'nalishini tekshiring. Zaryadlanuvchi batareyalar tavsiya etilmaydi.
• Eng yaxshi ishlash uchun batareyalarni har yili almashtiring.
  

Sifatli batareyalardan foydalaning. Eski va yangi batareyalarni aralashtirmang. Ishqoriy, standart (uglerod-sink) yoki qayta zaryadlanuvchi (nikel-akmium) batareyalarni aralashtirmang.

FCC/IC bayonoti

This equipment contains licence-exempt transmitter(s)/receiver(s) that comply with Part 15 of the FCC Rules, ICES-003 Class B specifications, and ISED Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. bu qurilma zararli shovqinlarga olib kelmasligi mumkin va.
2. ushbu qurilma har qanday qabul qilingan shovqinlarni, jumladan, kiruvchi ishlashga olib kelishi mumkin bo'lgan shovqinlarni qabul qilishi kerak.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with the RF exposure limits established by the FCC and ISED for an uncontrolled environment. Compliance with SAR requirements has been demonstrated through calculations, confirming that the RF exposure remains below the applicable threshold for use with 0 mm separation from the body.

MIJOLARNI QO'LLAB-QUVVAT

Intellicode® Keypad

Yordam uchun telefon yoki websayt
Chat: 1-800-354-3643
www.geniecompany.com

©2025 The Genie kompaniyasi
One Door Drive, Mt. Hope, OH 44660, AQSh
1 yil kafolat, tashrif buyuring www.geniecompany.com tafsilotlar uchun.
Pat. www.geniecompany.com

Hujjatlar / manbalar

GENIE KP2 Universal Intellicode klaviaturasi [pdf] Foydalanuvchi qo'llanmasi KP2, KP2 Universal Intellicode Keypad, Universal Intellicode Keypad, Intellicode Keypad, Keypad

Ma'lumotnomalar

• Foydalanuvchi uchun qo'llanma