MD2010 Loop Detector
Bukana ea Mosebelisi
Loop Detector e sebelisoa ho bona lintho tsa tšepe tse kang likoloi, libaesekele kapa literaka.
Likaroloana
- Mefuta e mengata ea phepelo: 12.0 ho isa ho 24 Volts DC 16.0 ho isa ho 24 Volts AC
- Boholo bo kopaneng: 110 x 55 x 35mm
- Boikutlo bo ikhethileng
- Pulse kapa Presence setting bakeng sa tlhahiso ea relay.
- Matlafatsa le ho kenya loop activation LED indicator
Kopo
E laola mamati kapa liheke tsa othomathike ha koloi e le teng.
Tlhaloso
Li-Loop detectors lilemong tsa morao tjena li fetohile sesebelisoa se tsebahalang se nang le lits'ebetso tse ngata tsa sepolesa, ho tloha ts'ebetsong ea ho lebela ho ea taolong ea sephethephethe. Boiketsetso ba liheke le mamati e se e le ts'ebeliso e tsebahalang ea loop detector.
Theknoloji ea thekenoloji ea digital ea loop detector e nolofalletsa thepa ho utloa phetoho ea ho inductance ea loop hang ha e lemoha ntho ea tšepe e tseleng ea eona. The inductive loop e lemohang ntho e entsoe ka terata ea motlakase e kentsoeng 'me e hlophisitsoe joalo ka sebopeho sa lisekoere kapa khutlonnetsepa. Loop e na le li-loops tse 'maloa tsa terata mme ho nahanela ho lokela ho fana ka kutloisiso ea loop ha e kenya libakeng tse fapaneng. Ho beha maikutlo a nepahetseng ho lumella li-loops hore li sebetse ka mokhoa o hlakileng. Ha ho fumanoa, detector e fana ka matla ho relay bakeng sa tlhahiso. Mokhoa ona o matlafatsang oa relay o ka hlophisoa, ho ea ho mekhoa e meraro e fapaneng, ka ho khetha switch switch ho sebui.
Sensing Loop Position
Loop ea ts'ireletso e lokela ho behoa moo tšepe e kholo ka ho fetisisa ea koloi e tla ba teng ha koloi e le tseleng ea heke e tsamaeang, monyako kapa boom polee e tseba hore liheke tsa tšepe, mamati kapa lipalo li ka kenya mochine oa loop haeba li feta. kahara sebaka sa sensing loop.
- Loop e sa lefelloeng ea ho tsoa e lokela ho behoa +/- bolelele ba koloi e le 'ngoe le halofo ho tloha hekeng, monyako kapa palo ea boom, lehlakoreng la tsela bakeng sa ho tsoa ha sephethephethe.
- Haeba ho kentsoe loop e fetang e le 'ngoe, etsa bonnete ba hore bonyane ho na le sebaka sa 2m pakeng tsa li-loop tsa sensor ho thibela ho kena-kenana le puisano pakeng tsa li-loops. (Hape bona khetho ea Dip-switch 1 le palo ea ho chencha lupu)
KHOPOTSO
Li-stock tsa Elsema tse entsoeng esale pele bakeng sa ho kenya habonolo. Li-loops tsa rona tse entsoeng esale pele li loketse mefuta eohle ea ho kenya.
Ekaba bakeng sa sehiloeng, tšela konkreite kapa sekoahelo sa asphalt se chesang. bona www.elsema.com/auto/loopdetector.htm
Sebaka sa detector le ho kenya
- Kenya detector sebakeng sa bolulo se thibelang boemo ba leholimo.
- Sesebelisoa se lokela ho ba haufi le sensing loop kamoo ho ka khonehang.
- Mohloli o lokela ho lula o kentsoe hole le libaka tse matla tsa makenete.
- Qoba ho matha haholotaglithapo tsa e haufi le li-loop detectors.
- Se ke oa kenya detector linthong tse thothomelang.
- Ha lebokose la taolo le kenngoa ka har'a limithara tse 10 tsa loop, lithapo tse tloaelehileng li ka sebelisoa ho hokahanya lebokose la taolo ho loop. Ho feta limithara tse 10 ho hloka ts'ebeliso ea thapo e sirelelitsoeng ea mantlha e 2. Se ke oa feta sebaka sa limithara tse 30 pakeng tsa lebokose la taolo le loop.
Dip-swicha Litlhophiso
| Sebopeho | Dip Switch li-setting | Tlhaloso |
| Litlhophiso tsa khafetsa (Dip switch 1) | ||
| Maqhubu a Phahameng | Dip switch 1 "ON"  |
Setlhophiso sena se sebelisoa maemong ao lilupu tse peli kapa ho feta li-detectors le li-loops li kentsoe. (The li-loops le li-detectors li lokela ho behoa bonyane 2m ka thoko). Seta sesupa se le seng ho maqhubu a phahameng le ho tse ling tse behiloeng ho maqhubu a tlase ho fokotsa litlamorao tsa puisano pakeng tsa litsamaiso tse peli. |
| Maqhubu a Tlase | Dip switch 1 "OFF" |
|
| Kutlo e tlase 1% ea maqhubu a loop | Dip switjha 2 & 3 "OFF" |
Setlhophiso sena se etsa qeto ea phetoho e hlokahalang ho loop frequency ho qala sesupa, ha tshepe e feta ka mose ho sebaka sa sensing loop. |
| Kutlo e tlase ho isa bohareng 0.5% ea maqhubu a loop | Dip switjha 2 "ON" & 3"Tlosa" |
|
| Kutlo e mahareng ho isa ho e phahameng 0.1% ea maqhubu a loop | Dip switch 2 "OFF" &3 "ON"  |
|
| Kutlo e phahameng 0.02% ea maqhubu a loop | Dip switch 2 & 3 "ON" |
|
| Boost Mode (Dip switch 4) | ||
| Boost mode e TIMA | Dip switch 4 "OFF"  |
Haeba "boost mode" e BUALI, detector e tla fetohela ho kutlo e phahameng hang ha e se e kentsoe tšebetsong. Hang ha koloi e se e sa lemohuoe, kutloisiso e khutlela ho se behiloeng ho dipswitch 2 le 3. Mokhoa ona o sebelisoa ha bophahamo ba koloi ea koloi bo eketseha ha bo feta holim'a sensing loop. |
| Mokhoa oa Boost o Buletsoe (Ea sebetsa) | Dip switch 4 “ON  |
|
| Ho ba teng ho sa feleng kapa mokhoa o fokolang oa ho ba teng (Ha ho khethoa mokhoa oa ho ba teng. Sheba dip-switch 8) (Dip switch 5) Tlhophiso ena e etsa qeto ea hore na relay e lula e sebetsa nako e kae ha koloi e emisoa sebakeng sa sensing loop. |
||
| Mokhoa o fokolang oa ho ba teng | Dip switch 5 "OFF"  |
Ka mokhoa o fokolang oa ho ba teng, mochine o tla khona feela kenya tshebetsong relay bakeng sa 30 min. Haeba koloi ha e so suthe sebakeng sa loop kamora 25 min, buzzer e tla utloahala ho lemosa mosebelisi hore relay e tla tima ka mor'a metsotso e meng e 5. Ho tsamaisa the koloi ho pholletsa le sebaka sa sensing loop hape, e tla tsosolosa mochine oa 30 min. |
| Mokhoa oa ho ba teng ka ho sa feleng | Dip switch 5 "ON"  |
Relay e tla lula e sebetsa hafeela koloi e ntse e le teng e fumanwang sebakeng sa sensing loop. Ha koloi e hlakola sebaka sa sensing loop, relay e tla tima. |
| Relay Response (Dip switch 6) | ||
| Relay karabo 1 | Dip switch 6 "OFF"  |
Relay e sebetsa hang hang ha koloi e le e fumanwang sebakeng sa sensing loop. |
| Relay karabo 2 | Dip switch 6 "ON"  |
Relay e sebetsa hang ka mor'a hore koloi e tsamaee sebaka sa ho utloa. |
| Sefe (Dip switch 7) | ||
| Sefe "ON" | Dip switch 7 “ON  |
Tlhophiso ena e fana ka tieho ea metsotsoana e 2 lipakeng tsa ho lemoha le ho kenya tshebetsong relay. Khetho ena e sebelisetsoa ho thibela ts'ebetso ea bohata ha lintho tse nyenyane kapa tse tsamaeang ka potlako li feta sebakeng sa loop. Khetho ena e ka sebelisoa moo terata ea motlakase e haufi le eona e leng sesosa sa ts'ebetso ea bohata. Haeba ntho e sa lule sebakeng sa 2 sec the detector e ke ke ya kenya tshebetsong relay. |
| Pulse mode kapa mokhoa oa ho ba teng (Dip switch 8) | ||
| Pulse mode | Dip switch 8 "OFF" |
Pulse mode. Relay e tla sebetsa bakeng sa 1 sec feela ha ho kenoa kapa ho tsoa sebakeng sa sensing loop joalo ka ha ho behiloe ke dip-switch 6. Ho tsosolosa koloi e tlameha ho tloha sebakeng sa kutlo le kena hape. |
| Mokhoa oa ho ba teng |  |
Mokhoa oa ho ba teng. Relay e tla lula e sebetsa, ho latela khetho ea dipswitch 5, ha feela koloi e le ka har'a sebaka sa sensing sa loop. |
| Seta bocha (Dip switch 9) MD2010 e tlameha ho hlophisoa bocha nako le nako ha ho etsoa phetoho ea litlhophiso ho Dip-switches. | ||
| Seta bocha |  |
Ho seta botjha, switjha dip-switch 9 bakeng sa hoo e ka bang 2 metsotsoana ebe oa tima hape. Mofuputsi joale e phethela ts'ebetso ea tlhahlobo ea loop. |
*Lemoha ka kopo: MD2010 e tlameha ho seta bocha nako le nako ha ho etsoa phetoho ea litlhophiso ho Dip-switches
Boemo ba ho fetisa:
| Relay | Vehicle Present | Ha ho koloi e teng | Loop e fosahetse | Ha ho Matla | |
| Mokhoa oa ho ba teng | N/O | E koetsoe | Bula | E koetsoe | E koetsoe |
| N/C | Bula | E koetsoe | Bula | Bula | |
| Pulse mode | N/O | E koala metsotsoana e 1 | Bula | Bula | Bula |
| N/C | E bula motsotsoana o 1 | E koetsoe | E koetsoe | E koetsoe | |
Matlafatsa kapa Seta Botjha (Teko ya Loop) Ha o kenya matla, detector e tla itlhahlobela sensing loop.
Netefatsa hore sebaka sa sensing loop se tlositsoe likotoana tsohle tsa tšepe, lisebelisoa le makoloi pele u matlafatsa kapa u seta sesupa bocha!
| Loup matus | Loop e butsoe kapa maqhubu a lupu a tlase haholo | Loop e na le potoloho e khuts'oane kapa maqhubu a loop a phahame haholo | Loop e ntle |
| Phoso I, L 0 | 3 e benya ka mor'a metsotsoana e meng le e meng e 3 E tsoela pele Ho fihlela loop e lokisitsoe |
6 e benya ka mor'a metsotsoana e meng le e meng e 3 E tsoela pele Ho fihlela loop e lokisitsoe |
Ka boraro ba bona ba bona LED, Fault LED le buzzer tla beep/flash (bala) lipakeng tsa 2 le II makhetlo a ho bontša lupu makhetlo a mangata. palo = 10KHz 3 lipalo x I OKHz = 30 — 40KHz |
| Buzzer | Li-beep tse 3 kamora metsotsoana e meng le e meng e 3 E pheta makhetlo a 5 ebe e emisa |
Li-beep tse 6 kamora metsotsoana e meng le e meng e 3 E pheta makhetlo a 5 ebe e emisa |
|
| Fumana LED | – | – | |
| Tharollo | 1. Sheba hore na lupu e bulehile. 2.Eketsa maqhubu a loop ka ho eketsa maqhubu a mangata a terata |
1.Check bakeng sa potoloho e khutšoanyane ho potoloho ea loop 2. Fokotsa mohala oa nomoro o pota-potileng loop ho fokotsa maqhubu a loop |
Matlafatsa kapa Seta bocha Buzzer le matšoao a LED)
Letšoao la Buzzer le LED:
| Fumana LED | |
| 1 sec e bonesa 1 sec ka thoko | Ha ho koloi (tšepe) e fumanoeng sebakeng sa loop |
| Bulela ruri | Koloi (tšepe) e fumanoe sebakeng sa loop |
| Phoso ea LED | |
| 3 e benya ka metsotsoana e 3 ka thoko | Loop wire ke potoloho e bulehileng. Sebelisa Dip-switch 9 ka mor'a hore phetoho efe kapa efe e etsoe. |
| 6 e benya ka metsotsoana e 3 ka thoko | Loop wire e khutsufalitsoe. Sebelisa Dip-switch 9 ka mor'a hore phetoho efe kapa efe e etsoe. |
| Buzzer | |
| E lla ha koloi e le teng |
Buzzer e lla ho netefatsa tšibollo ea pele e leshome |
| Mololi o sa khaotseng o nang le no koloi sebakeng sa loop |
Lithapo tse hlephileng tsa loop kapa li-terminals tsa motlakase Sebelisa Dip-switch 9 ka mor'a hore phetoho e be teng entsoe. |
E ajoa ke:
Elsema Pty Ltd
31 Tarlington Place, Smithfield
NSW 2164
Ph: 02 9609 4668
Websebaka: www.elsema.com
Litokomane / Lisebelisoa
 |
ELSEMA MD2010 Loop Detector [pdf] Bukana ea Mosebelisi MD2010, Loop Detector, MD2010 Loop Detector |
