Litaba
pata
Allen-Bradley 1734-IE2C POINT IO 2 ea Hona joale le 2 Voltage Input Analog modules
Tlhahisoleseding ya Sehlahiswa
- The POINT I/O 2 Current and 2 Voltage Input Analog Modules ke letoto la li-module tse etselitsoeng ho kenya lits'ebetsong tsa indasteri.
- Li tla ka linomoro tse fapaneng tsa lethathamo, ho kenyelletsa 1734-IE2C, 1734-IE2CK, 1734-IE2V, le 1734-IE2VK. Letoto la li-module tsa C li koahetsoe ka mokhoa o hlophisitsoeng bakeng sa tšireletso e eketsehileng.
- Li-module tsena li fana ka li-current and voltage kenya bokhoni ba analog, e lumellang hore ho be le tlhokomelo e nepahetseng le taolo ea matšoao a motlakase. Li na le li-terminal blocks tse ntshuwang bakeng sa ho kenya le ho hlokomela habonolo.
- Sehlahisoa se lumellana le CE Low Voltage Directive (LVD) mme e tlameha ho tsamaisoa ho tsoa mohloling o tsamaellanang le Safety Extra Low Voltage (SELV) kapa Protected Extra Low Voltage (PELV) ho netefatsa polokeho.
- Bukana ea mosebedisi e fana ka litaelo tse qaqileng mabapi le ho kenya, ho hlophisa, ho kenya marang-rang, le puisano le mojule. E boetse e kenyelletsa tlhahisoleseding mabapi le ho hlalosa matšoao a boemo le litlhaloso.
Litaelo tsa Tšebeliso ea Sehlahisoa
- Pele o qala:
- Bala bukana ea mosebelisi le lisebelisoa life kapa life tse ling tse thathamisitsoeng bakeng sa ho kenya, litlhophiso le litaelo tsa ts'ebetso.
- Itloaetse litlhoko tsa ho kenya le melao e sebetsang, likhoutu le litekanyetso.
- Kenya Mounting Base:
- Latela litaelo tse fanoeng ho kenya hantle motheo oa ho kenya mochini oa mojule.
- Kenya I/O Module:
- Sheba bukana ea mosebelisi bakeng sa litaelo tsa mohato ka mohato mabapi le ho kenya module ea I/O setsing se ntseng se hola.
- Kenya Terminal Block e Nkoang:
- Latela litaelo tse fanoeng ho kenya block block e ka ntshuwang hore ho be bonolo ho kenya likhoele le tlhokomelo.
- Tlosa Mounting Base:
- Haeba ho hlokahala, sheba bukana ea mosebelisi bakeng sa tataiso mabapi le ho tlosa setsi sa ho hlongoa.
- Tlosa Module:
- Latela litaelo tsa lithapo tse fanoeng ho hokahanya mojule hantle le sistimi ea motlakase.
- Buisana le Mojule oa Hau:
- Sheba bukana ea mosebelisi bakeng sa tlhahisoleseling mabapi le mokhoa oa ho buisana le mojule molemong oa ho beha leihlo le ho laola.
- Lipontšo tsa Boemo ba Toloko:
- Ithute mokhoa oa ho toloka matšoao a boemo mojulung ka ho sheba bukana ea mosebelisi.
Hlokomela: Bakeng sa lintlha tse ling, litlhaloso, le lintlha tsa polokeho, ka kopo sheba bukana ea mosebelisi e fanoeng le sehlahisoa.
Litaelo tsa ho Hloma
Litaelo tsa Pele
- POINT I/O 2 Hajoale le 2 Moqtage Input Analog modules
- Catalog Numbers 1734-IE2C, 1734-IE2CK, 1734-IE2V, 1734-IE2VK, letoto la C
- Linomoro tsa lethathamo tse nang le sehlongoana sa 'K' li koahetsoe ka mokhoa o lumellanang 'me litlhaloso tsa tsona li tšoana le li-catalogs tse sa lumellaneng.
Kakaretso ea Liphetoho
- Khatiso ena e na le lintlha tse latelang tse ncha kapa tse nchafalitsoeng. Lenane lena le kenyelletsa lintlafatso tsa bohlokoa feela 'me ha le reretsoe ho hlahisa liphetoho tsohle.
- HLOKOMELA: Bala tokomane ena le litokomane tse thathamisitsoeng karolong ea Mehloli ea Tlatsetso mabapi le ho kenya, ho hlophisoa le ho sebetsa ha thepa ena pele u kenya, u lokisa, u sebelisa kapa u hlokomela sehlahisoa sena. Basebelisi ba kopuoa ho itloaetsa litaelo tsa ho kenya le ho kenya likhoele ho kenyelletsa litlhoko tsa likhoutu tsohle tse sebetsang, melao le litekanyetso.
- Mesebetsi e kenyeletsang ho kenya, ho lokisa, ho kenya ts'ebetsong, ts'ebeliso, kopano, ho qhaqhoa le tlhokomelo li hlokoa hore li etsoe ke basebetsi ba koetlisitsoeng ka mokhoa o nepahetseng ho latela melao ea ts'ebetso e sebetsang. Haeba sesebelisoa sena se sebelisoa ka tsela e sa boleloang ke moetsi, tšireletso e fanoeng ke thepa e ka senyeha.
- HLOKOMELA: Ho lumellana le CE Low Voltage Directive (LVD), sesebelisoa sena se tlameha ho tsamaisoa ho tsoa mohloling o lumellanang le Safety Extra Low Voltage (SELV) kapa Protected Extra Low Voltage (PELV).
TLHOKOMELISO:
- Sireletsa likhokahano life kapa life tsa kantle tse amanang le sesebelisoa sena ka ho sebelisa likurufu, lithapo tse thellang, likhokello tsa likhoele, kapa mekhoa e meng e fanoeng ka sehlahisoa sena.
- Se ke oa hakolla thepa ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi.
Tikoloho le Sebaka
- HLOKOMELA: Thepa ena e reretsoe ho sebelisoa tikolohong ea indasteri ea Pollution Degree 2, ka overvoltagLisebelisoa tsa Sehlopha sa II (joalokaha ho hlalositsoe ho EN/IEC 60664-1), sebakeng se bophahamong ho fihla ho 2000 m (6562 ft) ntle le ho nyenyefatsa.
- Thepa ena ha ea rereloa ho sebelisoa libakeng tsa bolulo 'me e ka 'na ea se ke ea fana ka tšireletso e lekaneng litšebeletsong tsa puisano tsa seea-le-moea libakeng tse joalo.
- Thepa ena e fanoa e le lisebelisoa tsa mofuta o bulehileng bakeng sa tšebeliso ea kahare. E tlameha ho kenngoa ka har'a sebaka se kampetsoeng se etselitsoeng maemo a khethehileng a tikoloho a tla be a le teng le a etselitsoeng ka nepo ho thusa ho thibela kotsi ea motho ka lebaka la ho fumaneha ha likarolo tse phelang. Sebaka se kampetsoeng se tlameha ho ba le thepa e thibelang malakabe e loketseng ho thusa ho thibela kapa ho fokotsa ho ata ha lelakabe, ho latela litekanyetso tsa ho ata ha lelakabe la 5VA kapa ho amoheloa bakeng sa kopo haeba e se tšepe. Bokahare ba sebaka se koaletsoeng bo tlameha ho fumaneha feela ka tšebeliso ea sesebelisoa. Likarolo tse latelang tsa khatiso ena li ka ba le lintlha tse ling mabapi le lintlha tsa mofuta oa sebaka se koaletsoeng tse hlokoang ho tsamaisana le litifikeiti tse itseng tsa polokeho ea sehlahisoa.
Ho phaella khatisong ena, sheba tse latelang:
- Industrial Automation Wiring and Grounding Guidelines, sengoliloeng 1770-4.1, bakeng sa litlhoko tse eketsehileng tsa ho kenya.
- NEMA Standard 250 le EN/IEC 60529, ha e sebetsa, bakeng sa litlhaloso tsa likhato tsa ts'ireletso tse fanoeng ke libaka tse koetsoeng.
Thibela ho tsoa ha Electrostatic
- HLOKOMELA: Sesebelisoa sena se na le maikutlo a ho tsoa ha electrostatic, e ka bakang tšenyo e ka hare le ho ama ts'ebetso e tloaelehileng. Latela litataiso tsena ha u sebetsana le thepa ena:
- Thetsa ntho e theohileng ho tima ntho e ka bang teng.
- Apara lesela la letsoho le lumelitsoeng fatše.
- Se ke oa ama lihokelo kapa lithakhisa maboteng a likarolo.
- U se ke ua ama likarolo tsa potoloho ka har'a thepa.
- Sebelisa sebaka sa ho sebetsa sa static-safe, haeba se le teng.
- Boloka thepa ka har'a sephutheloana se loketseng se sa sebetseng ha se sa sebelisoe.
Tumello ea Sebaka se Kotsi sa Amerika Leboea
- Lintlha Tse Latelang Lia sebetsa Ha U Sebelisa Thepa Sena Libakeng Tse Kotsi.
- Lihlahisoa tse tšoailoeng "CL I, DIV 2, GP A, B, C, D" li loketse ho sebelisoa ho Sehlopha sa I Division 2 Lihlopha A, B, C, D, Libaka tse Kotsi le libaka tse se nang kotsi feela. Sehlahisoa se seng le se seng se na le matšoao ho nameplate ea lintlha tse bontšang khoutu ea mocheso ea sebaka se kotsi. Ha o kopanya lihlahisoa ka har'a sistimi, khoutu ea mocheso e mpe ka ho fetesisa (nomoro e tlase "T") e ka sebelisoa ho thusa ho fumana khoutu ea mocheso o akaretsang oa sistimi. Metsoako ea lisebelisoa tsamaisong ea hau e itšetlehile ka lipatlisiso tsa Bolaoli ba lehae bo nang le Taolo nakong ea ho kenya.
TEMOSO: Kotsi ea ho phatloha
- Se ke oa hakolla thepa ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- Se ke oa hakolla likhokahano sesebelisoa sena ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- Sireletsa likhokahano life kapa life tsa kantle tse amanang le sesebelisoa sena ka ho sebelisa likurufu, lithapo tse thellang, likhokello tsa likhoele, kapa mekhoa e meng e fanoeng ka sehlahisoa sena.
- Phapanyetsano ea likarolo e ka 'na ea senya ho nepahala ha Sehlopha sa I sa 2.
Kamohelo ea Sebaka se Kotsi UK le Europe
Lintlha tse latelang li sebetsa ho lihlahisoa tse tšoailoeng II 3 G:
- E reretsoe ho sebelisoa libakeng tse ka bang le seqhomane joalo ka ha ho hlalositsoe ke UKEX regulation 2016 No. 1107 and European Union Directive 2014/34/EU 'me e fumanoe e latela Litlhoko tsa Bohlokoa tsa Bophelo bo Botle le Tšireletseho tse amanang le moralo le kaho ea lisebelisoa tsa Sehlopha sa 3 e reretsoe ho sebelisoa sebakeng sa 2 se nang le seqhomane, se fanoeng ho Shejule 1 ea UKEX le Annex II ea Taelo ena.
- Ho lumellana le Litlhokahalo tsa Bohlokoa tsa Bophelo le Ts'ireletso ho netefalitsoe ka ho latela EN IEC 60079-7 le EN IEC 60079-0.
- Ke Sehlopha sa II sa Thepa, Sehlopha sa 3 sa Thepa, 'me se lumellana le Litlhoko tsa Bohlokoa tsa Bophelo bo Botle le Tšireletseho tse amanang le moralo le kaho ea thepa e joalo e fanoeng ho Schedule 1 ea UKEX le Annex II ea EU Directive 2014/34/EU. Sheba UKEx le EU Declaration of Conformity ho rok.auto/certifications bakeng sa lintlha.
- Mofuta oa tšireletso ke Ex ec IIC T4 Gc ho ea ka EN IEC 60079-0: 2018, LITLHAKISO TSA LITŠOANTŠISO TSA LITŠOANTŠISO - KAROLO EA 0: SEBELISA - LITLHAKISO TSE KAKARETSO, Letsatsi la Phatlalatso 07/2018, le CENELEC ENIEC 60079-7:2015:1 Ho phatloha ho hoholo. Tšireletso ea lisebelisoa ka ho eketseha ha tšireletso "e".
- Ikamahanya le Maemo a EN IEC 60079-0:2018, LITABA TSE PHAHAMANG - KAROLO EA 0: SESEBETSI - LITLHAKISO TSE KAKARETSO, Letsatsi la Phatlalatso 07/2018, CENELEC EN IEC 60079-
7:2015 + A1: 2018 Maqhubu a sepakapaka. Tšireletso ea lisebelisoa ka ho eketseha ha tšireletso "e", nomoro ea setifikeiti sa boitsebiso DEMKO 04 ATEX 0330347X le UL22UKEX2478X. - E reretsoe ho sebelisoa libakeng tseo ho tsona ho phatloha ho bakoang ke likhase, mouoane, moholi, kapa moea ho ke keng ha etsahala hore li etsahale, kapa ho ka etsahalang hore li etsahale ka seoelo le ka nako e khutšoane feela. Libaka tse joalo li lumellana le lihlopha tsa Zone 2 ho latela UKEX regulation 2016 No. 1107 le ATEX Directive 2014/34/EU.
- E kanna ea ba le linomoro tsa lethathamo tse lateloang ke "K" ho bonts'a khetho e lumellanang ea ho roala.
Kamohelo ea Sebaka se Kotsi sa IEC
- Lintlha tse latelang li sebetsa ho lihlahisoa tse tšoailoeng ka setifikeiti sa IECEx:
- E reretsoe ho sebelisoa libakeng tseo ho tsona ho phatloha ho bakoang ke likhase, mouoane, moholi, kapa moea ho ke keng ha etsahala hore li etsahale, kapa ho ka etsahala hore li etsahale ka seoelo le ka nako e khutšoane feela. Libaka tse joalo li lumellana le likarolo tsa Zone 2 ho IEC 60079-0.
- Mofuta oa tšireletso ke Ex eC IIC T4 Gc ho latela IEC 60079-0 le IEC 60079-7.
- Lumellana le Maemo a IEC 60079-0, Boemo ba leholimo bo phatlohang - Karolo ea 0: Thepa - Litlhokahalo tse akaretsang, Khatiso ea 7, Letsatsi la ntlafatso 2017 le IEC 60079-7, 5.1, Maemo a phatlohang - Karolo ea 2017: Tšireletso ea lisebelisoa ka polokeho e eketsehileng ”, nomoro ea setifikeiti sa IECEx sa IECEx UL 7X.
- E kanna ea ba le linomoro tsa lethathamo tse lateloang ke "K" ho bonts'a khetho e lumellanang ea ho roala.
TEMOSO: Maemo a Khethehileng a Tšebeliso e Bolokehileng
- Sesebelisoa sena ha se hanyetsane le khanya ea letsatsi kapa mehloli e meng ea mahlaseli a UV.
- Thepa ena e tla beoa sebakeng se tiisitsoeng sa UKEX/ATEX/IECEx Zone 2 se nang le tekanyo e tlase ea tšireletso ea IP54 (ho latela EN/IEC 60079-0) mme e sebelisoe tikolohong e sa feteng Pollution Degree 2. joalo ka ha ho hlalositsoe ho EN/IEC 60664-1) ha e sebelisoa tikolohong ea Zone 2. Letlapa le tlameha ho fumaneha feela ka tšebeliso ea lisebelisoa.
- Sesebelisoa sena se tla sebelisoa ka har'a litekanyetso tse boletsoeng tse hlalosoang ke Rockwell Automation.
- Tšireletso ea nakoana e tla fanoa e behiloe boemong bo sa feteng 140% ea tlhōrō ea matla a phahameng.tage liteisheneng tsa phepelo ea lisebelisoa.
- Litaelo tse bukeng ea mosebelisi li tla shejoa.
- Thepa ena e tlameha ho sebelisoa feela le UKEX/ATEX/IECEx e netefalitsoeng ea Rockwell Automation backplanes.
- Earthing e finyelloa ka ho kenya li-module holim'a terene.
- Lisebelisoa li tla sebelisoa tikolohong e sa feteng Pollution Degree 2.
- Karolo ea bobeli ea transformer ea hajoale e ke ke ea buloa ha e sebelisoa maemong a Sehlopha sa I, Zone 2.
HLOKOMELA:
- Haeba thepa ena e sebelisoa ka tsela e sa boleloang ke moetsi, tšireletso e fanoang ke thepa e ka senyeha.
- Bala tokomane ena le litokomane tse thathamisitsoeng karolong ea Mehloli ea Tlatsetso mabapi le ho kenya, ho hlophisoa, le ts'ebetso ea thepa ena pele u kenya, ho lokisa, ho sebelisa kapa ho hlokomela sehlahisoa sena. Basebelisi ba kopuoa ho itloaetsa litaelo tsa ho kenya le ho kenya likhoele ho kenyelletsa litlhoko tsa likhoutu tsohle tse sebetsang, melao le litekanyetso.
- Ho kenya, ho lokisa, ho kenya ts'ebetsong, ts'ebeliso, kopano, ho qhaqhoa le ho lokisa li tlameha ho etsoa ke basebetsi ba koetlisitsoeng ka mokhoa o nepahetseng ho latela melao ea ts'ebetso e sebetsang. Haeba ho sa sebetse hantle kapa ho senyehile, ha ho na liteko tsa ho lokisa tse lokelang ho etsoa. Mojule o lokela ho khutlisetsoa ho moetsi hore a lokisoe. U se ke ua qhaqha module.
- Sesebelisoa sena se netefalitsoe hore se sebelisoe feela ka har'a mocheso oa moea o potolohileng -20…+55 °C (-4…+131 °F). Thepa ha ea lokela ho sebelisoa ka ntle ho sebaka sena.
- Sebelisa feela lesela le bonolo le omeletseng la anti-static ho hlakola lisebelisoa. U se ke ua sebelisa lisebelisoa leha e le life tsa ho hloekisa.
Pele O Qala
- Letoto lena la C la POINT I/O™ 2 ea hajoale le 2 voltagLi-module tsa analog tsa ho kenya li ka sebelisoa le tse latelang:
- Li-adapter tsa DeviceNet® le PROFIBUS
- Li-adapter tsa ControlNet® le EtherNet/IP™, li sebelisa Studio 5000 Logix Designer® kopo ea mofuta oa 20 kapa hamorao.
- Sheba lipalo ho tloaelana le likarolo tse kholo tsa mojule, u hlokomele hore kopano ea wiring base ke e 'ngoe ea tse latelang:
- 1734-TB kapa 1734-TBS POINT I/O setsi sa lisebelisoa tse peli, se kenyelletsang 1734-RTB kapa 1734-RTBS block ea removable, le 1734-MB e ntseng e holisa.
- 1734-TOP kapa 1734-TOPS POINT I/O setsi se le seng sa terminal
POINT I/O Module e nang le 1734-TB kapa 1734-TBS Base
Tlhaloso ea Karolo
| Tlhaloso | Tlhaloso | ||
| 1 | Mochine oa ho notlela mojule | 6 | 1734-TB kapa 1734-TBS setsi sa marang-rang |
| 2 | Leibole e ngoloang ka selaete | 7 | Likarolo tsa mahlakoreng tse hokahaneng |
| 3 | Mojule oa I/O o kentsoeng | 8 | Mechanical keying (orange) |
| 4 | Mohele oa "terminal block" o ka tlosoang (RTB). | 9 | DIN rail locking screw (orange) |
| 5 | Terminal block e ka tlosoang e nang le screw (1734-RTB) kapa cl ea selemoamp (1734-RTBS) | 10 | Setšoantšo sa mohala oa mojule |
POINT I/O Module e nang le 1734-TOP kapa 1734-TOPS Base
Tlhaloso ea Karolo
| Tlhaloso | Tlhaloso | ||
| 1 | Mochine oa ho notlela mojule | 6 | Likarolo tsa mahlakoreng tse hokahaneng |
| 2 | Leibole e ngoloang ka selaete | 7 | Mechanical keying (orange) |
| 3 | Mojule oa I/O o kentsoeng | 8 | DIN rail locking screw (orange) |
| 4 | Mohele oa "terminal block" o ka tlosoang (RTB). | 9 | Setšoantšo sa mohala oa mojule |
| 5 | Sekhechana se le seng sa terminal se nang le screw (1734-TOP) kapa cl ea selemoamp (1734-TOPS) |
Kenya Setsi sa Mounting
- Ho kenya setsi se ntseng se hola seporong sa DIN (karolo ea Allen-Bradley® 199-DR1; 46277-3; EN50022), tsoela pele ka tsela e latelang:
- HLOKOMELA: Sehlahisoa sena se thehiloe ka terene ea DIN ho ea sebakeng sa chassis. Sebelisa seporo sa tšepe sa DIN se entsoeng ka zinc-plated chromate-passivated ho netefatsa ho theoa ho nepahetseng. Tšebeliso ea lisebelisoa tse ling tsa terene tsa DIN (mohlalaample, aluminium kapa polasetiki) tse ka senyang, tsa oxidize, kapa li-conductor tse futsanehileng, li ka fella ka ho theoha ho sa lokelang kapa ka nakoana. Sireletsa seporo sa DIN ho ea holim'a metsi hoo e ka bang limilimithara tse ling le tse ling tse 200 (7.8 in.) 'me u sebelise li-ankora ka nepo. Etsa bonnete ba hore u theola seporo sa DIN hantle. Sheba Industrial Automation Wiring and Grounding Guidelines, khatiso ea Rockwell Automation 1770-4.1, bakeng sa boitsebiso bo eketsehileng.
- TLHOKOMELISO: Ha e sebelisoa Sehlopheng sa I, Karolo ea 2, sebakeng se kotsi, thepa ena e tlameha ho kenngoa ka har'a sebaka se loketseng se nang le mokhoa o nepahetseng oa wiring o lumellanang le likhoutu tsa motlakase tse laolang.
- Beha setsi sa ho bea holimo ka holimo ho li-unit tse kentsoeng (adapter, phepelo ea motlakase, kapa mojule o teng).
- Thellela setsi se ntseng se hola fatše ho lumella likotoana tsa mahlakoreng tse hokahaneng hore li hokahane le mojule kapa adaptara e haufi.
- Tobetsa ka tieo ho beha motheo oa seporo seporong sa DIN. The mounting base e kena sebakeng.
- Etsa bonnete ba hore sekoahelo sa lamunu sa DIN rail locking se boemong bo tšekaletseng le hore se kentse seporo sa DIN.
- HLOKOMELA: Sebelisa sekoahelo sa ho qetela se tsoang ho adaptara ea hau kapa mojule oa interface ho koahela likhokahano tse pepesitsoeng setsing sa ho qetela sa terene ea DIN. Ho hloleha ho etsa joalo ho ka baka tšenyo ea thepa kapa kotsi ka lebaka la ho tsosoa ke motlakase.
Kenya I/O Module
- Module e ka kenngoa pele kapa ka mor'a ho kenya setsi. Etsa bonnete ba hore setsi sa ho kenya se kentsoe ka nepo pele u kenya module setsing sa ho kenya.
- Ho feta moo, etsa bonnete ba hore mounting base locking screw e behiloe ka tsela e tšekaletseng e lebisitsoe ho base.
- TLHOKOMELISO: Ha o kenya kapa o tlosa mojule ha motlakase oa backplane o ntse o butse, ho ka hlaha arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi. Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele.
- Ho pheta-pheta arcing ea motlakase ho baka ho roala ho feteletseng ho likhokahano ho module le sehokelo sa eona sa ho nyalana. Mabitso a tsofetseng a ka baka ho hanyetsa motlakase ho ka amang ts'ebetso ea module.
Ho kenya module, tsoela pele ka tsela e latelang
- Sebelisa screwdriver e nang le bladed ho potoloha keyswitch botlaaseng bo ntseng bo eketseha ka ho ea ka nako ea oache ho fihlela palo e hlokahalang bakeng sa mofuta oa mojule oo o o kenyang e tsamaisana le notch botlaaseng.
- Netefatsa hore sekoti sa ho notlela seporo sa DIN se maemong a tshekaletseng. Ha o khone ho kenya module haeba mochine oa ho notlela o sa notleloa.
- Kenya module ka ho otloloha ka har'a setsi sa ho kenya ebe o tobetsa ho boloka. Mojule o notlella sebakeng.
Kenya Setsi sa Removable Terminal Block
- RTB e fanoa le kopano ea hau ea wiring base. Ho tlosa, hula holim'a mofeng oa RTB.
- Sena se lumella setsi se ntseng se phahama hore se tlosoe ebe se nkeloa sebaka ha ho hlokahala ntle le ho tlosa mohala ofe kapa ofe.
- Ho kenya hape Removable Terminal Block, tsoela pele ka tsela e latelang.
- TLHOKOMELISO: Ha o hokela kapa o hakolla RTB o sebelisa matla a lehlakoreng la lebala, ho ka ba le arc ea motlakase.
- Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi.
- Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele.
- Kenya ntlha e shebaneng le mofeng ho setsi sa motheo.
- Qetello ena e na le karolo e kobehileng e sebetsanang le setsi sa wiring.
- Fetolela block block ho setsi sa lithapo ho fihlela e notlela sebakeng sa eona.
- Haeba mojule oa I/O o kentsoe, tlanya sebapali sa RTB sebakeng sa mojule.
TLHOKOMELISO: Bakeng sa 1734-RTBS le 1734-RTB3S, ho hokela le ho theolela terata, kenya screwdriver e nang le bladed (nomoro ea lethathamo la 1492-N90 - 3 mm bophara ba lehare) sebakeng se ka bang 73 ° (lehare le bapile le bokaholimo ba sebaka se bulehileng. ) ebe o sututsa ka bonolo.
TLHOKOMELISO: Bakeng sa 1734-TOPS le 1734-TOP3S, ho hokela le ho otlolla terata, kenya screwdriver e nang le bladed (nomoro ea lethathamo la 1492-N90 - 3 mm bophara ba lehare) sebakeng se ka bang 97 ° (lehare le bapile le bokaholimo ba sebaka se bulehileng. ) ebe o tobetsa (o seke oa sutumelletsa holimo kapa tlase).
Tlosa Mounting Base
- Ho tlosa setsi se ntseng se hola, o tlameha ho tlosa mojule ofe kapa ofe o kentsoeng le mojule o kentsoeng botlaaseng ho le letona. Tlosa block block e ka ntshuwang, haeba e hokahane.
- TLHOKOMELISO: Ha o kenya kapa o tlosa mojule ha motlakase oa backplane o ntse o butse, ho ka ba le arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi.
- Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele. Ho pheta-pheta arcing ea motlakase ho baka ho roala ho feteletseng ho likhokahano ho module le sehokelo sa eona sa ho nyalana.
- Mabitso a tsofetseng a ka baka ho hanyetsa motlakase ho ka amang ts'ebetso ea module.
- TLHOKOMELISO: Ha o hokela kapa o hakolla Removable Terminal Block (RTB) o sebelisa matla a lehlakoreng la lebala, ho ka ba le arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi.
- Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele.
- Tlosa mohele oa RTB mojulung oa I/O.
- Hula mofeng oa RTB ho tlosa block block e ka ntshuwang.
- Tobetsa senotlolo sa mojule ka holimo ho mojule.
- Hula mojule oa I/O ho tlosa botlaaseng.
- Pheta mehato ea 1, 2, 3, le 4 bakeng sa mojule ka ho le letona.
- Sebelisa screwdriver e nang le mahare a manyane ho potoloha sekoti sa ho notlela sa orange ho ea sebakeng se otlolohileng. Sena se lokolla mochine oa ho notlela.
- Phahamisa ka kotloloho ho tlosa.
Tlanya Module
Ho kenya mojule, sheba litšoantšo le litafole.
TLHOKOMELISO: Haeba o hokela kapa o hakolla terata ha motlakase o ka lehlakoreng la lebala o ntse o butswe, ho kenngwa arc ya motlakase. Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele.
POINT I/O 2 Hajoale le 2 Moqtage Output Analog Modules
- CHAS GND = Sebaka sa chassis
- C= Tloaelehileng
- V = Phepelo
Setšoantšo sa 1 - POINT I/O 2 Hajoale Input Analog Module Wiring - 1734-IE2C, 1734-IE2CK
- In = Kanale ea ho kenya
- CHAS GND = Sebaka sa chassis
- C = E tloaelehileng
- V = 12/24V DC phepelo
- Hlokomela: Ha e sirelelitsoe, 0.3 A max
| Channel | Kenyo ea Hona Joale | Sebaka sa Chassis | Tloaelehileng | Phepelo |
| 0 | 0 | 2 | 4 | 6 |
| 1 | 1 | 3 | 5 | 7 |
Setšoantšo sa 2 - POINT I/O 2 Moqtage Input Analog Module Wiring - 1734-IE2V, 1734-IE2VK
- Ho = Mocha oa ho kenya
- CHAS GND = Sebaka sa Chassis
- C= Tloaelehileng
- V = 12/24V DC phepelo
- Hlokomela: Ha e sirelelitsoe, 0.3 A max
| Channel | MoqtagKeletso | Sebaka sa Chassis | Tloaelehileng | Phepelo |
| 0 | 0 | 2 | 4 | 6 |
| 1 | 1 | 3 | 5 | 7 |
- 12/24V DC e fanoa ke bese ea matla a ka hare ea tšimo.
- HLOKOMELA: Sehlahisoa sena se thehiloe ka terene ea DIN ho ea sebakeng sa chassis. Sebelisa seporo sa tšepe sa DIN se entsoeng ka zinc-plated chromate-passivated ho netefatsa ho theoa ho nepahetseng.
- Tšebeliso ea lisebelisoa tse ling tsa terene tsa DIN (mohlalaample, aluminium kapa polasetiki) tse ka senyang, tsa oxidize, kapa li-conductor tse futsanehileng, li ka fella ka ho theoha ho sa lokelang kapa ka nakoana.
- Sireletsa seporo sa DIN ho ea sebakeng se hloahloa hoo e ka bang limilimithara tse ling le tse ling tse 200 (7.8 in.) 'me u sebelise liankora tsa ho qetela ka nepo.
- Etsa bonnete ba hore u theola seporo sa DIN hantle. Sheba Industrial Automation Wiring and Grounding Guidelines, khatiso ea Rockwell Automation 1770-4.1, bakeng sa boitsebiso bo eketsehileng.
Buisana le Module oa Hao
- POINT I/O modules romela (hlahisa) le ho amohela (ho ja) data ea I/O (melaetsa). U beha lintlha tsena mohopolong oa processor. Li-module tsena li hlahisa li-byte tse 6 tsa data ea ho kenya (scanner Rx) le data ea boemo ba phoso. Li-module tsena ha li sebelise data ea I/O (scanner Tx).
'Mapa oa data oa kamehla
- Boholo ba molaetsa: 6 Byte
| 15 | 14 | 13 | 12 | 11 | 10 | 09 | 08 | 07 06 | 05 | 04 | 03 | 02 | 01 | 00 | ||
|
Lihlahisoa (scanner Rx) |
Mocha oa ho kenya 0 - li-byte tse phahameng | Mocha oa ho kenya 0 - li-byte tse tlase | ||||||||||||||
| Mocha oa ho kenya 1 - li-byte tse phahameng | Mocha oa ho kenya 1 - li-byte tse tlase | |||||||||||||||
| Boemo ba byte bakeng sa mocha oa 1 | Boemo ba byte bakeng sa mocha oa 0 | |||||||||||||||
| OR | UR | HHA | LLA | HA | LA | CM | CF | OR | UR | HHA | LLA | HA | LA | CM | CF | |
| Lisebelisoa (sekana Tx) | Ha ho na data e sebelisitsoeng | |||||||||||||||
Moo:
- OR = Ho fapana; 0 = Ha ho phoso, 1 = Phoso
- UR = Ka tlase; 0 = Ha ho phoso, 1 = Phoso
- HHA = Alamo e Phahameng / e Phahameng; 0 = Ha ho phoso, 1 = Phoso
- LLA = Alamo e tlase / e tlase; 0 = Ha ho phoso, 1 = Phoso
- HA = Alamo e Phahameng; 0 = Ha ho phoso, 1 = Phoso
- LA = Alamo e tlase; 0 = Ha ho phoso, 1 = Phoso
- CM = Mokhoa oa ho lekanya; 0 = Tloaelehileng, 1 = Mokhoa oa ho lekanya
- CF = Boemo ba Phoso ea Channel; 0 = Ha ho phoso, 1 = Phoso
Lipontšo tsa Boemo ba Toloko
- Sets'oants'o le tafole e latelang e bonts'a tlhahisoleseling mabapi le mokhoa oa ho hlalosa matšoao a boemo.
Boemo ba Letšoao la Li-module
| Sesupo | Boemo | Tlhaloso |
| Boemo ba module | E tima | Ha ho matla a sebelisoang sesebelisoa. |
| Botala | Sesebelisoa se sebetsa ka mokhoa o tloaelehileng. | |
| Botala bo benyang | Sesebelisoa se hloka ho sebelisoa ka lebaka la ho haella, ho sa fella, kapa litlhophiso tse fosahetseng. | |
| Bofubedu bo benyang | Phoso e ka phekolehang e teng. | |
| Khubedu | Phoso e ke keng ea lokisoa e etsahetse. Ho hloleha ho itlhahloba ho teng (checksum failure, kapa rama test failure at cycle power). Phoso e bolaeang ea Firmware e teng. | |
| Ho benya bokgubedu/ botala | Sesebelisoa se maemong a ho itlhahloba. | |
| Boemo ba marang-rang | E tima | Sesebelisoa ha se inthaneteng:
• Sesebelisoa ha se phethe teko ea dup_MAC-id. • Sesebediswa ha se na matla – Sheba sesupo sa boemo ba mojule. |
| Botala bo benyang | Sesebelisoa se inthaneteng empa ha se na likhokahano sebakeng se seng se le teng. | |
| Botala | Sesebelisoa se inthaneteng 'me se na le likhokahano sebakeng se seng se le teng. | |
| Bofubedu bo benyang | Khokahano e le 'ngoe kapa tse ngata tsa I/O li nakong. | |
| Khubedu | Ho hloleha ha lihokelo tse mahlonoko - Sesebelisoa sa puisano se hlolehileng. Sesebelisoa se hlokometse phoso e se thibelang ho buisana le marang-rang. | |
| Ho benya bokgubedu/ botala | Sesebelisoa se nang le phoso ea puisano - Sesebelisoa se hlokometse phoso ea phihlello ea marang-rang mme se maemong a phoso ea puisano. Sesebelisoa se amohetse le ho amohela Kopo e Phoso ea Identity Communication - molaetsa o molelele oa protocol. |
| Sesupo | Boemo | Tlhaloso |
| Boemo ba kanale | E tima | Mojule o maemong a CAL. |
| Botala bo tiileng | Ts'ebetso e tloaelehileng e teng ka lisebelisoa tsa ho hlahloba likanale. | |
| Botala bo benyang | Channel e ntse e lokisoa. | |
| Bofubelu bo tiileng | Phoso e kholo ea kanale e teng. | |
| Bofubedu bo benyang | Channel e qetellong ea sebaka (0 mA kapa 21 mA) bakeng sa 1734-IE2C, 1734-IE2CK. Channel e qetellong ea mefuta e fapaneng (ho feta kapa ka tlase) bakeng sa 1734-IE2V, 1734-IE2VK. |
Litlhaloso
Litlhaloso tsa ho Kena
| Tšobotsi | 1734-IE2C, 1734-IE2CK | 1734-IE2V, 1734-IE2VK |
| Palo ea lisebelisoa | 2 e phethiloeng e le 'ngoe, e sa ikaroleng, ea hona joale | 2 e le 'ngoe, e sa khethe, voltage |
| Qeto | 16 likotoana - ho feta 0…21 mA
0.32 µA/cnt |
Letšoao la 15 bits plus
320 µA/cnt ka mokhoa oa unipolar kapa bipolar |
| Kenya hona joale | 4…20 mA
0…20 mA |
– |
| Keletso voltage | – | 0…10V e ka lokisoang (-0.0V ka tlase, +0.5V ho feta)
± 10V ea mosebelisi e ka lokisoa (-0.5V ka tlase, +0.5V ho feta) |
| Ho nepahala ho felletseng(1) | 0.1% Sekala se Feletseng @ 25 °C (77 °F) | |
| Ho nepahala ho hoholeha ka mocheso | 30 ppm/°C | 5 ppm/°C |
| Sekhahla sa ntlafatso (mojule ka 'ngoe) | 120 ms @ Notch = 50 Hz
100 ms @ Notch = 60 Hz (kamehla) 24 ms @ Notch = 250 Hz 12 ms @ Notch = 500 Hz |
|
| Karabo ea mohato oa ho kenya (ka kanale) | 80 ms @ Notch = 50 Hz
70 ms @ Notch = 60 Hz (kamehla) 16 ms @ Notch = 250 Hz 8 ms @ Notch = 500 Hz |
|
| Digital filter nako e sa fetohe | 0…10,000 ms (ea kamehla = 0 ms) | |
| Kenyelletso ea ho kenya | 60 Ω | 100 lik'hilograma |
| Ho hanyetsa ho kenya | 60 Ω | 200 lik'hilograma |
| Mofuta oa phetoho | Delta Sigma | |
| Boemo bo tloaelehileng ba ho hana mekhoa | 120dB | |
| Karolelano ea ho hana mokhoa o tloaelehileng | -60 dB | |
| Sesefa sa Notch | -3 dB e hlophisitsoe ka tsela e latelang:
13.1 Hz @ Notch = 50 Hz 15.7 Hz @ Notch = 60 Hz 65.5 Hz @ Notch = 250 Hz 131 Hz @ Notch = 580 Hz |
|
| Sebopeho sa data | Nomoro e saenneng | |
| Boholo bo fetelletseng | Phoso e sirelelitsoe ho 28.8V DC | |
| Tekanyetso | Feme e lekanngoe | |
- E kenyelletsa mantsoe a phoso a offset, gain, non-linearity, le a pheta-phetoang.
Litlhaloso Kakaretso
| Tšobotsi | 1734-IE2C, 1734-IE2CK | 1734-IE2V, 1734-IE2VK |
| Sethala sa setsi | 1734-TB, 1734-TBS, 1734-TOP, kapa 1734-TOPS | |
| Terminal base screw torque | 0.6 N•m (7 lb•in) | |
| Lipontšo, lehlakore la logic | 1 botala/khubedu – boemo ba mojulu 1 botala/bokgubedu – boemo ba netweke 2 botala/bokgubedu – boemo ba ho kenya | |
| Keyswitch boemo | 3 | |
| POINTBus™ hajoale, max | 75 mA @ 5V DC | |
| Ho felloa ke matla, max | 0.6 W @ 28.8V DC | 0.75 W @ 28.8V DC |
| Tšobotsi | 1734-IE2C, 1734-IE2CK | 1734-IE2V, 1734-IE2VK | |
| Thermal dissipation, max | 2.0 BTU/hora @ 28.8V DC | 2.5 BTU/hora @ 28.8V DC | |
| Ho itšehla thajana voltage | 50V e tsoelang pele
Ha ho na ho itšehla thajana pakeng tsa likanale ka bomong Ho lekoa ho mamella 2550V DC bakeng sa 60 s |
50V e tsoelang pele
Ha ho na ho itšehla thajana pakeng tsa likanale ka bomong Ho lekoa ho mamella 2200V DC bakeng sa 60 s |
|
| Matla a kantle a DC | |||
| 24V DC | |||
| Phepelo voltage, nom | 24V DC | ||
| Moqtage fapaneng | 10…28.8V DC | 10…28.8V DC | |
| Phepelo ea hajoale | 10 mA @ 24V DC | 15 mA @ 24V DC | |
| Litekanyo (HxWxD), hoo e ka bang. | 56 x 12 x 75.5 mm (2.21 x 0.47 x 2.97 in.) | ||
| Boima ba 'mele, hoo e ka bang. | Lik'hilograma tse 33 (1.16 oz.) | ||
| Sehlopha sa lithapo(1) (2) | 1 - likoung tsa matšoao | ||
| Boholo ba terata | 0.25…2.5 mm2 (22…14 AWG) terata ya koporo e tiileng kapa e holetsweng e kentsweng ho 75 °C (167 °F) kapa ho feta 1.2 mm (3/64 in.) max | ||
| Reiti ea mofuta oa sebaka | Ha ho letho (mokhoa o bulehileng) | ||
| Khoutu ea mocheso ea Amerika Leboea | T5 | T4A | |
| UKEX/ATEX khoutu ea mocheso | T4 | ||
| IECEx khoutu ea mocheso | T4 | ||
- Sebelisa tlhahisoleseding ena ea sehlopha sa conductor bakeng sa ho rera litsela tsa conductor joalokaha ho hlalositsoe ho Industrial Automation Wiring le Grounding Guidelines, khatiso 1770-4.1.
- Sebelisa lintlha tsena tsa Sehlopha sa Li-Conductor bakeng sa ho rera ho tsamaisa li-conductor joalokaha ho hlalositsoe ho Bukana ea ho Kenya Maemo a Sisteme e loketseng.
Litlhaloso tsa Tikoloho
| Tšobotsi | Boleng |
| Mocheso, ho sebetsa | IEC 60068-2-1 (Papatso ea Teko, Mohatsela o sebetsang),
IEC 60068-2-2 (Teko ea Bd, Mocheso o omeletseng o sebetsang), IEC 60068-2-14 (Teko ea Nb, Tšisinyeho ea Mocheso e sebetsang): -20 °C ≤ Ta ≤ +55 °C (-4 °F ≤ Ta ≤ +131 °F) |
| Mocheso, moea o potolohileng, max | 55 °C (131 °F) |
| Mocheso, ho se sebetse | IEC 60068-2-1 (Teko ea Ab, e sa Packaked Nonoperating Cold),
IEC 60068-2-2 (Teko ea Bb, Mocheso o omileng o sa Pakiloeng o sa Pakiloeng), IEC 60068-2-14 (Teko ea Na, e sa Paketeng e sa Pakaloang Mocheso oa Tšisinyeho ea Mocheso): -40…+85 °C (-40…+185 °F) |
| Mongobo o amanang | IEC 60068-2-30 (Teko ea Db, e sa pakeloang Damp Mocheso): 5…95% e sa tsitsang |
| Ho thothomela | IEC60068-2-6 (Tlhahlobo Fc, E sebetsa): 5 g @ 10…500 Hz |
| Ho tšoha, ho sebetsa | EC 60068-2-27 (Teko Ea, Tšabo e sa Paketehang): 30 g |
| Ho tšoha, ho se sebetse | EC 60068-2-27 (Teko Ea, Tšabo e sa Paketehang): 50 g |
| Mesi | Tlhaloso: IEC 61000-6-4 |
| Tšireletso ea ESD | IEC6100-4-2:
Khokahano ea 6 kV e ntša moea oa 8 kV |
| Tšireletso ea mahlaseli a RF | IEC 61000-4-3:
10V/m le 1 kHz sine-wave 80% AM ho tloha ho 80…6000 MHz |
| Tšireletso ea EFT / B | IEC 61000-4-4:
± 3 kV ho 5 kHz likoung tsa matšoao |
| Ho itšireletsa mafung ka nakoana | IEC 61000-4-5:
± 2 kV line-earth (CM) likoung tse sirelelitsoeng |
| Ho tsamaisoa ha RF ho itšireletsa mafung | IEC61000-4-6:
10V rms e nang le 1 kHz sine-wave 80% AM ho tloha ho 150 kHz…80 MHz |
Setifikeiti
| Setifikeiti (ha sehlahisoa se tšoailoe)(1) | Boleng |
| c-UL-rona | Thepa ea UL e thathamisitsoeng ea Taolo ea Indasteri, e netefalitsoeng bakeng sa US le Canada. Sheba UL File E65584.
UL E thathamisitsoe bakeng sa Sehlopha sa I, Sehlopha sa 2 Sehlopha sa A,B,C,D Libaka tse Kotsi, se netefalitsoeng bakeng sa US le Canada. Sheba UL File E194810. |
| UK le CE | UK Statutory Instrument 2016 No. 1091 le European Union 2014/30/EU EMC Directive, e lumellanang le: EN 61326-1; Tekanyo/Taolo/ Tshebediso ya laboratori, ditlhoko tsa Indasteri
EN 61000-6-2; Tšireletso ea Liindasteri EN 61000-6-4; Mesi ea Liindasteri EN 61131-2; Balaoli ba Sebetsang (Karolo ea 8, Zone A & B) UK Statutory Instrument 2016 No. 1101 le European Union 2014/35/EU LVD, e lumellanang le: EN 61131-2; Batsamaisi ba Lenaneo (Temana ea 11) UK Statutory Instrument 2012 No. 3032 le European Union 2011/65/EU RoHS, e lumellanang le: EN IEC 63000; Litokomane tsa tekheniki |
Ex |
UK Statutory Instrument 2016 No. 1107 le European Union 2014/34/EU ATEX Directive, e lumellanang le: EN IEC 60079-0; Litlhoko tse akaretsang
EN IEC 60079-7; Sepakapaka se Phatlohileng, Tšireletso "e" II 3 G Ex ec IIC T4 Gc DEMKO 04 ATEX 0330347X UL22UKEX2478X |
| Katoloso ea RCM | Molao oa Australian Radiocommunications Act, o tsamaellanang le: AS/NZS CISPR11; Mesi ea Liindasteri. |
| IECEx | Sistimi ea IECEx, e lumellanang le
IEC 60079-0; Litlhoko tse akaretsang IEC 60079-7; Sepakapaka se Phatlohileng, Tšireletso "e" II 3 G Ex ec IIC T4 Gc IECEx UL 20.0072X |
| KC | Ngodiso ya Korea ya Thepa ya Kgaso le Dikgokahanyo, e tsamaellanang le: Article 58-2 of Radio Waves Act, Clause 3 |
| EAC | Russia Customs Union TR CU 020/2011 EMC Technical Regulation Russian Customs Union TR CU 004/2011 LV Technical Regulation |
| Morocco | Arrêté ministériel n° 6404-15 du 1 er muharram 1437
Arrêté ministériel n° 6404-15 du 29 ramadan 1436 |
CCC |
CNCA-C23-01:2019 CCC Kenglement Rule of Explosion-Proven Electrical Products, e tsamaelanang le: GB/T 3836.1-2021 Atmospheres Explosive-Karolo ea 1: Thepa—Litlhoko tse akaretsang
GB/T 3836.3-2021 Boemo ba leholimo bo phatlohang—Karolo ea 3: Tšireletso ea lisebelisoa ka ho eketseha ha polokeho “e” CCC 2020122309111607 (APBC) |
| UKCA | 2016 No. 1091 - Melao ea Tšebelisano ea Motlakase 2016 No. 1101 - Melao ea Thepa ea Motlakase (Tšireletso)
2012 No. 3032 - Thibelo ea Tšebeliso ea Lintho Tse Ling Tse Kotsi Melawanang ea Thepa ea Motlakase le Elektronike |
Sheba sehokelo sa Setifikeiti sa Sehlahisoa ho rok.auto/certifications bakeng sa Phatlalatso ea Tumellano, Litifikeiti, le lintlha tse ling tsa setifikeiti.
Lisebelisoa tse Eketsehileng
Ho fumana lintlha tse ling ka lihlahisoa tse hlalositsoeng khatisong ena, sebelisa lisebelisoa tsena. U ka khona view kapa kopitsa lingoliloeng ho rok.auto/literature.
| Mohlodi | Tlhaloso |
| Tataiso ea Khetho ea POINT I/O Modules, khatiso 1734-SG001 | E fana ka li-adapter tsa POINT I/O le litlhaloso tsa module. |
| POINT I/O Digital le Analog Modules le POINTBlock I/O Modules Bukana ya mosebedisi, khatiso 1734-UM001 | E fana ka tlhaloso e qaqileng ea ts'ebetso ea module, tlhophiso, le ts'ebeliso ea li-module tsa POINT I / O tsa digital le analog le POINTBlock I / O modules. |
| Industrial Automation Wiring le Grounding Guidelines, khatiso 1770-4.1 | E fana ka litataiso tse akaretsang tsa ho kenya sistimi ea indasteri ea Rockwell Automation. |
| Setifikeiti sa Sehlahisoa website, rok.auto/certifications | E fana ka liphatlalatso tsa tumellano, litifikeiti le lintlha tse ling tsa setifikeiti. |
Rockwell Automation Support
Sebelisa lisebelisoa tsena ho fumana lintlha tsa tšehetso.
| Setsi sa Tšehetso ea Theknoloji | Fumana thuso ea ho etsa livideo, Lipotso, puisano, liforamu tsa basebelisi, Motheo oa Tsebo, le lintlafatso tsa tsebiso ka sehlahisoa. | rok.auto/support |
| Linomoro tsa Mohala tsa Tšehetso ea Theknoloji ea Libaka | Fumana nomoro ea mohala ea naha ea heno. | rok.auto/phonesupport |
| Setsi sa Litokomane tsa Teknoloji | Fumana ka potlako le ho khoasolla litlhaloso tsa tekheniki, litaelo tsa ho instola, le libuka tsa mosebelisi. | rok.auto/techdocs |
| Literature Library | Fumana litaelo tsa ho kenya, libuka, libukana, le lingoliloeng tsa boitsebiso ba theknoloji. | rok.auto/literature |
| Setsi sa Tšebelisano ea Sehlahisoa le ho Khoasolla (PCDC) | Khoasolla firmware, e amanang files (joalo ka AOP, EDS, le DTM), le ho fihlella lintlha tsa tokollo ea sehlahisoa. | rok.auto/pcdc |
Documentation Feedback
Maikutlo a hau a re thusa ho fana ka litlhoko tsa litokomane tsa hau hamolemo. Haeba u na le litlhahiso mabapi le mokhoa oa ho ntlafatsa litaba tsa rona, tlatsa foromo ho rok.auto/docfeedback.
Thepa ea Matla a Motlakase le Elektronike (WEEE)
- Qetellong ea bophelo, lisebelisoa tsena li lokela ho bokelloa ka thoko ho litšila tse sa hlophisoang tsa masepala.
- Rockwell Automation e boloka tlhaiso-leseling ea morao-rao ea tikoloho ea sehlahisoa ho eona website at rok.auto/pec.
- Ikopanye le rona. rockwellautomation.com ho atolosa monyetla oa motho®
- AMERIKA: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
- EUROPE/HARENG BOCHABELA/AFRICA: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2663 0600, Fax: (32)2 663 0640
- ASIA PACIFIC: Rockwell Automation SEA Pte Ltd, 2 Corporation Road, #04-05, Main Lobby, Corporation Place, Singapore 618494, Tel: (65) 6510 6608, FAX: (65) 6510 6699
- UNITED KINGDOM: Rockwell Automation Ltd., Pitfield, Kiln Farm, Milton Keynes, MK11 3DR, United Kingdom, Mohala: (44)(1908) 838-800, Fax: (44)(1908) 261-917
- Allen-Bradley, ho atolosa menyetla ea batho, Factory Talk, POINT 1/0, POINTBus, Rockwell Automation, Studio 5000 Logix Designer, le TechConnect ke matšoao a khoebo a Rockwell Automation, Inc.
- ControlNet, DeviceNet, le EtherNet/IP ke matšoao a khoebo a ODVA, Inc.
- Matšoao a khoebo ao e seng a Rockwell Automation ke thepa ea lik'hamphani tsa bona.
- Phatlalatso 1734-IN027E-EN-E - June 2023 | Supersedes Phatlalatso 1734-IN027D-EN-E - December 2018
- Copyright © 2023 Rockwell Automation, Inc. Litokelo tsohle li sirelelitsoe.
Litokomane / Lisebelisoa
 |
Allen-Bradley 1734-IE2C POINT IO 2 ea Hona joale le 2 Voltage Input Analog modules [pdf] Buka ea Taelo 1734-IE2C POINT IO 2 ea Hona joale le 2 Moqtage Input Analog Modules, 1734-IE2C, POINT IO 2 Current and 2 Voltage Input Analog Modules, Current and 2 Voltage Input Modules Analog, Input Modules Analog, Analog modules, Modules |