Allen-Bradley 1734-IE2C POINT IO 2 na yanzu da 2 Vol.tage Input Analog Modules

Bayanin samfur

• POINT I/O 2 na yanzu da 2 Voltage Input Analog Modules jerin kayayyaki ne da aka tsara don shigarwa a cikin saitunan masana'antu.
• Suna zuwa cikin lambobi daban-daban, gami da 1734-IE2C, 1734-IE2CK, 1734-IE2V, da 1734-IE2VK. Jerin C kayayyaki an lulluɓe su don ƙarin kariya.
• Waɗannan samfuran suna ba da na yanzu da voltage shigar da damar analog, ba da izinin sa ido daidai da sarrafa siginar lantarki. An sanye su da tubalan tasha masu cirewa don sauƙi shigarwa da kulawa.
• Samfurin ya dace da CE Low Voltage Umarnin (LVD) kuma dole ne a yi amfani da shi daga tushen da ke da alaƙa da Tsaron Ƙarfin Ƙarfin Ƙarfafawatage (SELV) ko Kariyar Ƙarfin Ƙarƙashin Ƙarfafawatage (PELV) don tabbatar da aminci.
• Littafin mai amfani yana ba da cikakkun bayanai game da shigarwa, daidaitawa, wayoyi, da sadarwa tare da tsarin. Hakanan ya haɗa da bayani kan fassarar alamomi da ƙayyadaddun bayanai.

Umarnin Amfani da samfur

1. Kafin Ka Fara:
   • Karanta littafin mai amfani da kowane ƙarin albarkatun da aka jera don shigarwa, daidaitawa, da umarnin aiki.
   • Sanin kanku da buƙatun shigarwa da ƙa'idodi, lambobi, da ƙa'idodi.
2. Shigar da Dutsen Tushen:
   • Bi umarnin da aka bayar don shigar da tushe mai hawa don tsarin.
3. Sanya Module I/O:
   • Koma zuwa littafin jagorar mai amfani don umarnin mataki-mataki akan shigar da tsarin I/O akan tushen hawa.
4. Shigar da Tushen Tasha Mai Cirewa:
   • Bi umarnin da aka bayar don shigar da toshe mai cirewa don sauƙaƙe wayoyi da kiyayewa.
5. Cire Tushen Tsayawa:
   • Idan ana buƙata, koma zuwa littafin mai amfani don jagora kan cire tushe mai hawa.
6. Waya Module:
   • Bi umarnin waya da aka bayar don haɗa tsarin yadda ya kamata zuwa tsarin lantarki.
7. Sadar da Module ɗin ku:
   • Koma zuwa littafin mai amfani don bayani kan yadda ake sadarwa tare da tsarin don sa ido da dalilai na sarrafawa.
8. Ma'anar Fassara Matsayi:
   • Koyi yadda ake fassara alamomin matsayi akan tsarin ta hanyar komawa zuwa littafin mai amfani.

Lura: Don ƙarin cikakkun bayanai, ƙayyadaddun bayanai, da bayanan aminci, da fatan za a koma zuwa littafin mai amfani da aka bayar tare da samfurin.

Umarnin Shigarwa

Umarnin asali

• POINT I/O 2 na yanzu da 2 Voltage Input Analog Modules
• Lissafin Lissafi 1734-IE2C, 1734-IE2CK, 1734-IE2V, 1734-IE2VK, jerin C
• Lambobin kasida tare da suffix 'K' an rufa su daidai gwargwado kuma ƙayyadaddun su iri ɗaya ne da kasidar da ba ta dace ba.

Takaitacciyar Canje-canje

• Wannan ɗaba'ar ta ƙunshi sabbin ko sabunta bayanai masu zuwa. Wannan jeri ya ƙunshi ingantaccen sabuntawa kawai kuma ba a yi niyya don nuna duk canje-canje ba.
• HANKALI: Karanta wannan daftarin aiki da takaddun da aka jera a sashin Ƙarin Albarkatun game da shigarwa, daidaitawa da aiki na wannan kayan aiki kafin shigar, daidaitawa, sarrafa ko kula da wannan samfur. Ana buƙatar masu amfani su san kansu da umarnin shigarwa da wayoyi ban da buƙatun duk lambobi, dokoki, da ƙa'idodi.
• Ayyukan da suka haɗa da shigarwa, gyare-gyare, sakawa cikin sabis, amfani, taro, rarrabuwa, da kiyayewa ana buƙatar ma'aikatan da suka dace da horarwa su aiwatar da su daidai da ƙa'idar aiki. Idan an yi amfani da wannan kayan aikin ta hanyar da masana'anta ba su kayyade ba, kariya ta kayan aikin na iya lalacewa.
• HANKALI: Don yin biyayya da CE Low Voltage Umarnin (LVD), dole ne a yi amfani da wannan kayan aikin daga tushen da ya dace da Tsaron Ƙarfin Ƙarfin Ƙarfafawa.tage (SELV) ko Kariyar Ƙarfin Ƙarƙashin Ƙarfafawatage (PELV).

GARGADI:

• Kiyaye duk wani haɗin waje na waje wanda ya haɗu da wannan kayan aiki ta amfani da sukurori, latches na zamewa, masu haɗin zaren, ko wasu hanyoyin samar da wannan samfur.
• Kar a cire haɗin kayan aiki sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari.

Muhalli da Kawaye

• HANKALI: An yi nufin wannan kayan aikin don amfani da shi a cikin muhallin masana'antu na Digiri na 2 na gurɓataccen gurɓata, a cikin juzu'itage Aikace-aikacen Category II (kamar yadda aka bayyana a cikin EN/IEC 60664-1), a tsayi har zuwa 2000 m (6562 ft) ba tare da lalata ba.
• Wannan kayan aikin ba a yi niyya don amfani da shi a wuraren zama ba kuma maiyuwa ba zai ba da cikakkiyar kariya ga ayyukan sadarwar rediyo a cikin irin waɗannan wuraren ba.
• Ana ba da wannan kayan aikin azaman buɗaɗɗen kayan aiki don amfanin cikin gida. Dole ne a ɗora shi a cikin wani shingen da aka ƙera da kyau don waɗancan takamaiman yanayin muhalli waɗanda za su kasance kuma an tsara su yadda ya kamata don taimakawa hana rauni na mutum wanda ke haifar da damar zuwa sassan rayuwa. Yakin dole ne ya kasance yana da kyawawan kaddarorin hana wuta don taimakawa hana ko rage yaɗuwar harshen wuta, tare da ƙimar yaɗuwar harshen wuta na 5VA ko a yarda da aikace-aikacen idan ba ƙarfe ba. Dole ne a sami damar shiga ciki ta hanyar amfani da kayan aiki kawai. Sashe na gaba na wannan ɗaba'ar na iya ƙunsar ƙarin bayani game da takamaiman ƙididdiga nau'in shinge waɗanda ake buƙata don biyan wasu takaddun amincin samfur.

Baya ga wannan ɗaba'ar, duba waɗannan abubuwa:

• Ka'idodin Waya Automation Automation na Masana'antu, bugu 1770-4.1, don ƙarin buƙatun shigarwa.
• NEMA Standard 250 da EN/IEC 60529, kamar yadda ya dace, don bayani game da matakan kariya da aka bayar ta hanyar shinge.

Hana Fitar Electrostatic

• HANKALI: Wannan kayan aiki yana kula da fitarwa na lantarki, wanda zai iya haifar da lalacewa na ciki kuma ya shafi aiki na al'ada. Bi waɗannan jagororin lokacin da kuke sarrafa wannan kayan aiki:
• Taɓa ƙasan abu don fitar da yuwuwar a tsaye.
• Saka madaidaicin wuyan hannu na ƙasa.
• Kar a taɓa masu haɗawa ko fil akan allunan abubuwan da suka shafi abubuwa.
• Kar a taɓa abubuwan da'ira a cikin kayan aiki.
• Yi amfani da madaidaicin wurin aiki, idan akwai.
• Ajiye kayan aiki a cikin marufi mai aminci a tsaye lokacin da ba a amfani da shi.

Amincewa da Wuri Mai Haɗari na Arewacin Amurka

• Bayanin da ke gaba yana aiki Lokacin Aiki da Wannan Kayan Aiki A Wurare masu haɗari.
• Kayayyakin da aka yiwa alama "CL I, DIV 2, GP A, B, C, D" sun dace don amfani a cikin Rukunin Class I Division 2 A, B, C, D, Wurare masu haɗari da wurare marasa haɗari kawai. Ana ba da kowane samfur tare da alamomi akan farantin suna mai nuni da lambar yanayin zafin wuri mai haɗari. Lokacin haɗa samfura a cikin tsarin, ƙila a yi amfani da lambar mafi ƙarancin zafin jiki (lambar “T” mafi ƙasƙanci) don taimakawa ƙayyadaddun lambar yanayin yanayin gabaɗayan tsarin. Haɗin kayan aiki a cikin tsarin ku ana ƙarƙashin bincike daga Hukumar da ke da iko a lokacin shigarwa.

GARGADI: Hadarin Fashewa

• Kar a cire haɗin kayan aiki sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari.
• Kar a cire haɗin haɗi zuwa wannan kayan aikin sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari.
• Kiyaye duk wani haɗin waje na waje wanda ya haɗu da wannan kayan aiki ta amfani da sukurori, latches na zamewa, masu haɗin zaren, ko wasu hanyoyin samar da wannan samfur.
• Sauya abubuwan da aka gyara na iya ɓata dacewa ga Class I Division 2.

Yarda da Wuri Mai Haɗari na Burtaniya da Turai

Mai zuwa ya shafi samfuran da aka yiwa alama II 3G:

• An yi nufin amfani da su a cikin yanayi mai yuwuwar fashewa kamar yadda aka ayyana ta tsarin UKEX 2016 No. 1107 da Dokokin Tarayyar Turai 2014/34/EU kuma an gano su bi Muhimman Buƙatun Lafiya da Tsaro waɗanda suka shafi ƙira da gina kayan aikin Category 3 waɗanda an yi nufin amfani da shi a cikin Yanki 2 mai yuwuwar fashewar yanayi, wanda aka bayar a cikin Jadawalin 1 na UKEX da Annex II na wannan Umarnin.
• An tabbatar da bin Mahimman Bukatun Lafiya da Tsaro ta hanyar bin EN IEC 60079-7 da EN IEC 60079-0.
• Rukunin Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayanka na 3, kuma suna bin Mahimman Bukatun Lafiya da Tsaro da suka shafi ƙira da gina irin waɗannan kayan aikin da aka bayar a cikin Jadawalin 1 na UKEX da Annex II na EU Directive 2014/34/EU. Duba UKEx da EU Declaration of Conformity a rok.auto/certifications don cikakkun bayanai.
• Nau'in kariyar ita ce Ex ec IIC T4 Gc bisa ga EN IEC 60079-0: 2018, ATMOSPHERES FASAHA - KASHI NA 0: KAYAN AIKI - BUKATAR JAMA'A, Ranar fitowa 07/2018, da CENELEC ENIEC 60079-7 Yanayin fashewa. Kariyar kayan aiki ta ƙarin aminci "e".
• Yi daidai da daidaitattun EN IEC 60079-0: 2018, ATMOSPHERES masu fashewa - Sashe na 0: Kayayyakin - Bukatun Gabaɗaya, Ranar fitowa 07/2018, CENELEC EN IEC 60079-
  7:2015+A1:2018 Fashewar yanayi. Kariyar kayan aiki ta ƙara aminci "e", lambar takardar shedar DEMKO 04 ATEX 0330347X da UL22UKEX2478X.
• An yi nufin amfani da su a wuraren da iskar gas, tururi, hazo, ko iska ba zai iya faruwa ba, ko kuma zai iya faruwa ba safai ba kuma na ɗan gajeren lokaci. Irin waɗannan wuraren sun dace da rarrabuwar yankin 2 bisa ga ka'idar UKEX 2016 No. 1107 da ATEX umarnin 2014/34/EU.
• Ana iya samun lambobi na kasida da “K” ke biye da su don nuna zaɓin suturar da ta dace.

Amincewar Wuri Mai Haɗari IEC

• Abubuwan da ke biyowa sun shafi samfuran da aka yiwa alama da takaddun IECEx:
• An yi nufin amfani da su a wuraren da iskar gas, tururi, hazo, ko iska ba zai iya faruwa ba, ko kuma zai iya faruwa ba safai ba kuma na ɗan gajeren lokaci. Irin waɗannan wuraren sun dace da rarrabuwar Yanki 2 zuwa IEC 60079-0.
• Nau'in kariyar shine Ex eC IIC T4 Gc bisa ga IEC 60079-0 da IEC 60079-7.
• Daidaita ka'idoji IEC 60079-0, yanayi mai fashewa - Kashi na 0: Kayan aiki - Gabaɗaya buƙatun, Edition 7, Ranar Bita 2017 da IEC 60079-7, 5.1 Edition na kwanan wata 2017, yanayi mai fashewa - Sashe na 7: Kariyar kayan aiki ta haɓaka aminci ", lambar takardar shaidar IECEx IECEx UL 20.0072X.
• Ana iya samun lambobi na kasida da “K” ke biye da su don nuna zaɓin suturar da ta dace.

GARGADI: Sharuɗɗa na Musamman don Amintaccen Amfani

• Wannan kayan aikin baya juriya ga hasken rana ko wasu tushen hasken UV.
• Wannan kayan aikin za a ɗora shi a cikin ƙayyadaddun shinge na UKEX / ATEX / IECEx 2 tare da ƙaramin ƙimar kariya ta ingress na aƙalla IP54 (daidai da EN/IEC 60079-0) kuma a yi amfani da shi a cikin yanayin da bai wuce Digiri na 2 ba kamar yadda aka ayyana a cikin EN/IEC 60664-1) lokacin da aka yi amfani da shi a cikin mahalli na Zone 2. Dole ne a sami damar shiga wurin ta amfani da kayan aiki kawai.
• Wannan kayan aikin za a yi amfani da shi a cikin ƙayyadaddun kimar sa waɗanda Rockwell Automation ya ayyana.
• Dole ne a samar da kariya ta wucin gadi wacce aka saita a matakin da bai wuce 140% na mafi girman ƙimar vol.tage a tashoshin samar da kayan aiki.
• Za a kiyaye umarnin a cikin littafin mai amfani.
• Dole ne a yi amfani da wannan kayan aikin tare da UKEX/ATEX/IECEx bokan Rockwell Automation backplanes.
• Ana samun ƙasa ta hanyar hawan kayayyaki akan dogo.
• Za a yi amfani da na'urori a cikin muhallin da bai wuce Digiri na 2 na gurɓatawa ba.
• Ba za a buɗe na biyu na taransfoma na yanzu ba lokacin da aka yi amfani da shi a cikin mahalli na Class I, Zone 2.

HANKALI:

• Idan ana amfani da wannan kayan aikin ta hanyar da masana'anta ba ta bayyana ba, kariya da kayan aikin ke bayarwa na iya lalacewa.
• Karanta wannan daftarin aiki da takaddun da aka jera a cikin Ƙarin Albarkatun ɓangaren game da shigarwa, daidaitawa, da aiki na wannan kayan aiki kafin shigar, daidaitawa, sarrafa, ko kula da wannan samfurin. Ana buƙatar masu amfani su san kansu da umarnin shigarwa da wayoyi ban da buƙatun duk lambobi, dokoki, da ƙa'idodi.
• Ana buƙatar shigarwa, gyare-gyare, shigar da sabis, amfani, haɗawa, rarrabuwa, da kiyayewa da ƙwararrun ma'aikatan da suka dace su yi daidai da ƙa'idar aiki. Idan akwai matsala ko lalacewa, bai kamata a yi ƙoƙarin gyarawa ba. Ya kamata a mayar da tsarin zuwa ga masana'anta don gyarawa. Kar a wargaza tsarin.
• An ba da izinin wannan kayan aikin don amfani kawai a cikin kewayon yanayin zafin iska na -20…+55 °C (-4…+131 °F). Kada a yi amfani da kayan aiki a wajen wannan kewayon.
• Yi amfani da busasshiyar kyalle mai tsauri kawai don goge kayan aiki. Kada ku yi amfani da kowane kayan tsaftacewa.

Kafin Ka Fara

• Wannan Silsilar C na POINT I/O™ 2 na yanzu da 2 voltagAna iya amfani da na'urori na analog na shigarwa tare da masu zuwa:
• DeviceNet® da PROFIBUS adaftar
• ControlNet® da EtherNet/IP™ adaftar, ta amfani da Studio 5000 Logix Designer® nau'in aikace-aikacen 20 ko kuma daga baya.
• Dubi alkaluman don sanin kanku da manyan sassa na tsarin, lura da cewa haɗin ginin waya yana ɗaya daga cikin masu zuwa:
• 1734-TB ko 1734-TBS POINT I/O tushe guda biyu, wanda ya haɗa da 1734-RTB ko 1734-RTBS mai cirewa tashoshi, da tushe mai hawa 1734-MB.
• 1734-TOP ko 1734-TOPS POINT I/O tushe guda ɗaya

POINT I/O Module tare da 1734-TB ko 1734-TBS Tushen

Bayanin Bangaren

 

	Bayani		Bayani
1	Tsarin kulle tsarin	6	1734-TB ko 1734-TBS hawa tushe
2	Alamar rubutu mai zamewa	7	Yankan gefe masu tsaka
3	I/O module mai sakawa	8	Maɓallin injina (orange)
4	Hannun tasha mai cirewa (RTB).	9	DIN dogo kulle dunƙule (orange)
5	Tushe mai cirewa tare da dunƙule (1734-RTB) ko bazara clamp (1734-RTBS)	10	Zane-zane na wayoyi

POINT I/O Module tare da 1734-TOP ko 1734-TOPS Tushen

Bayanin Bangaren

	Bayani		Bayani
1	Tsarin kulle tsarin	6	Yankan gefe masu tsaka
2	Alamar rubutu mai zamewa	7	Maɓallin injina (orange)
3	I/O module mai sakawa	8	DIN dogo kulle dunƙule (orange)
4	Hannun tasha mai cirewa (RTB).	9	Zane-zane na wayoyi
5	Tushen ƙarshen yanki guda ɗaya tare da dunƙule (1734-TOP) ko bazara clamp (1734-TOPS)

Shigar da Dutsen Ginin

• Don shigar da tushen hawa akan dogo na DIN (Lambar ɓangaren Allen-Bradley® 199-DR1; 46277-3; EN50022), ci gaba kamar haka:
• HANKALI: An kafa wannan samfurin ta hanyar dogo na DIN zuwa ƙasan chassis. Yi amfani da tutiya-plated chromate-passivated karfe DIN dogo don tabbatar da ingantaccen ƙasa. Amfani da sauran kayan dogo na DIN (misaliample, aluminum ko robobi) wanda zai iya lalata, oxidize, ko kuma masu jagoranci mara kyau, na iya haifar da ƙasa mara kyau ko tsaka-tsaki. Amintaccen dogo na DIN zuwa saman hawa kusan kowane 200 mm (7.8 in.) kuma amfani da anka na ƙarshe daidai. Tabbatar da saukar da layin dogo DIN yadda ya kamata. Dubi Ka'idodin Waya Automation Automation na Masana'antu, Rubutun Rockwell Automation 1770-4.1, don ƙarin bayani.
• GARGADI: Lokacin da aka yi amfani da shi a cikin Class I, Division 2, wuri mai haɗari, dole ne a ɗora wannan kayan aiki a cikin wani shinge mai dacewa tare da ingantacciyar hanyar wayoyi wanda ya dace da ka'idojin lantarki.

1. Sanya tushe mai hawa a tsaye sama da raka'o'in da aka shigar (adaftar, wutar lantarki, ko tsarin da ke akwai).
2. Zamar da gindin hawa zuwa ƙasa yana ƙyale ɓangarorin ɓangarorin da suka haɗa juna don haɗa madaidaicin module ko adaftar.
3. Latsa da ƙarfi don zaunar da gindin hawa akan dogo na DIN. Tushen hawa yana shiga cikin wuri.
   • Tabbatar cewa dunƙule DIN dogo na orange yana cikin matsayi a kwance kuma ya tsunduma cikin layin dogo na DIN.
4. HANKALI: Yi amfani da madaidaicin madafan adaftar ku ko tsarin dubawa don rufe haɗe-haɗe da aka fallasa akan tushen hawa na ƙarshe akan dogo na DIN. Rashin yin hakan na iya haifar da lalacewar kayan aiki ko rauni daga girgiza wutar lantarki.

Shigar da I/O Module

• Za a iya shigar da tsarin kafin ko bayan shigarwa na tushe. Tabbatar cewa an sanya maɓalli daidai kafin shigar da tsarin a cikin gindin hawa.
• Bugu da kari, tabbatar da cewa dunƙule tushe mai hawa yana matsayi a kwance ana nuni da tushe.
• GARGADI: Lokacin da kuka saka ko cire samfurin yayin da wutar jirgin baya ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari. Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.
• Maimaita harbin wutar lantarki yana haifar da wuce gona da iri ga lambobi a kan ma'auni da mahaɗin sa. Lambobin da suka sata na iya haifar da juriya na lantarki wanda zai iya shafar aikin ƙirar.

Don shigar da tsarin, ci gaba kamar haka

1. Yi amfani da screwdriver mai wutsiya don jujjuya maɓallan maɓalli akan gindin hawa agogon agogon hannu har sai adadin da ake buƙata don nau'in module ɗin da kuke girka yayi dai-dai da ƙima a gindin.
2. Tabbatar cewa DIN dogo kulle dunƙule yana cikin matsayi a kwance. Ba za ku iya saka tsarin ba idan an buɗe tsarin kullewa.
3. Saka tsarin kai tsaye zuwa cikin gindin hawa kuma latsa don amintattu. Module ɗin yana kulle cikin wuri.

Shigar da Tashar Tashar Mai Cire

• Ana ba da RTB tare da haɗin ginin wayar ku. Don cirewa, ɗaga hannun RTB.
• Wannan yana ba da damar cire tushe mai hawa kuma a maye gurbinsa kamar yadda ya cancanta ba tare da cire kowane daga cikin wayoyi ba.
• Don sake shigar da Toshe Tasha Mai Cirewa, ci gaba kamar haka.
• GARGADI: Lokacin da kuka haɗa ko cire haɗin RTB tare da amfani da ikon gefen filin, baka na lantarki na iya faruwa.
• Wannan na iya haifar da fashewa a cikin ma'auni na wurare masu haɗari.
• Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.

1. Saka ƙarshen kishiyar hannun a cikin rukunin tushe.
   • Wannan ƙarshen yana da sashe mai lanƙwasa wanda ke hulɗa tare da tushen wayoyi.
2. Juya katangar tasha zuwa ginshiƙin wayoyi har sai ta kulle kanta a wuri.
3. Idan an shigar da tsarin I/O, ƙwace riƙon RTB cikin wuri akan tsarin.

GARGADI: Don 1734-RTBS da 1734-RTB3S, don ɗaki da buɗe waya, saka screwdriver (lambar katalogi 1492-N90 - 3 mm diamita ruwa) a cikin buɗewa a kusan 73 ° (bangaren ruwa yana layi ɗaya da saman saman buɗewa). ) da turawa sama a hankali.

GARGADI: Don 1734-TOPS da 1734-TOP3S, don kwancewa da kwance waya, saka screwdriver (lambar katalogi 1492-N90 - 3 mm diamita ruwa) a cikin buɗewa a kusan 97 ° (bangaren ruwa yana layi ɗaya da saman saman buɗewa). ) kuma danna ciki (kada a tura sama ko ƙasa).

Cire Tushen Dutsen

• Don cire tushe mai hawa, dole ne ka cire duk wani tsarin da aka shigar da tsarin da aka shigar a cikin tushe zuwa dama. Cire toshe mai cirewa, idan an haɗa shi.
• GARGADI: Lokacin da kuka saka ko cire samfurin yayin da wutar jirgin baya ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari.
• Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba. Maimaita harbin wutar lantarki yana haifar da wuce gona da iri ga lambobi a kan ma'auni da mahaɗin sa.
• Lambobin da suka sata na iya haifar da juriya na lantarki wanda zai iya shafar aikin ƙirar.
• GARGADI: Lokacin da kuka haɗa ko cire haɗin Block Terminal mai Cirewa (RTB) tare da amfani da ikon gefen filin, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari.
• Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.

1. Cire hannun RTB akan tsarin I/O.
2. Ja hannun RTB don cire katangar tasha mai ciruwa.
3. Latsa makullin module a saman tsarin.
4. Ja kan tsarin I/O don cirewa daga tushe.
5. Maimaita matakai 1, 2, 3, da 4 don tsarin dama.
6. Yi amfani da screwdriver ƙarami don jujjuya dunƙule tushen lemu zuwa matsayi na tsaye. Wannan yana sakin tsarin kullewa.
7. Ɗaga kai tsaye don cirewa.

Waya Module

Don waya da tsarin, duba zane-zane da teburi.
GARGADI: Idan kun haɗa ko cire haɗin wayoyi yayin da wutar gefen filin ke kunne, shigarwar baka na lantarki. Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.

POINT I/O 2 na yanzu da 2 Voltage Output Analog Modules

• CHAS GND = Chassis ƙasa
• C = ba Na kowa
• V = wadata

Hoto 1 - POINT I/O 2 Analog Module Wiring na Input na Yanzu - 1734-IE2C, 1734-IE2CK

• In = Tashar shigarwa
• CHAS GND = Chassis ƙasa
• C = gama gari
• V = 12/24V DC wadata
• Lura: Ba a kiyaye shi ba, 0.3 A max

Tashoshi	Shigarwa na Yanzu	Gidan Chassis	Na kowa	wadata
0	0	2	4	6
1	1	3	5	7

Hoto na 2 - POINT I/O 2 Voltage Input Analog Module Wiring - 1734-IE2V, 1734-IE2VK

• In = Tashar shigarwa
  • CHAS GND = Ƙasar Chassis
• C = ba Na kowa
  • V = 12/24V DC wadata
• Lura: Ba a kiyaye shi ba, 0.3 A max

Tashoshi	Voltage Shigarwa	Gidan Chassis	Na kowa	wadata
0	0	2	4	6
1	1	3	5	7

• Ana samar da 12/24V DC ta bas ɗin wutar lantarki na ciki.
• HANKALI: An kafa wannan samfurin ta hanyar dogo na DIN zuwa ƙasan chassis. Yi amfani da tutiya-plated chromate-passivated karfe DIN dogo don tabbatar da ingantaccen ƙasa.
• Amfani da sauran kayan dogo na DIN (misaliample, aluminum ko filastik) wanda zai iya lalata, oxidize, ko kuma maras kyau jagoranci, na iya haifar da ƙasa mara kyau ko tsaka-tsaki.
• Amintaccen dogo na DIN zuwa saman hawa kusan kowane 200 mm (7.8 in.) kuma amfani da anka na ƙarshe daidai.
• Tabbatar da saukar da layin dogo DIN yadda ya kamata. Dubi Ka'idodin Waya Automation Automation na Masana'antu, Rubutun Rockwell Automation 1770-4.1, don ƙarin bayani.

Sadarwa tare da Module ɗin ku

• POINT I/O modules aika (samar) da karɓar (cinye) bayanan I/O (saƙonni). Kuna taswirar wannan bayanan akan ƙwaƙwalwar processor. Waɗannan samfuran suna samar da bytes 6 na bayanan shigarwa (Scanner Rx) da bayanan matsayi na kuskure. Waɗannan samfuran ba sa cinye bayanan I/O (scanner Tx).

Tsohuwar Taswirar Bayanai

• Girman saƙo: 6 Bytes

15

14

13

12

11

10

09

08

07 06

05

04

03

02

01

00

Yana samarwa (Scanner Rx)

Tashar shigarwa 0 - babban byte

Tashar shigarwa 0 - ƙananan byte

Tashar shigarwa 1 - babban byte

Tashar shigarwa 1 - ƙananan byte

Halin byte don tashar 1

Halin byte don tashar 0

OR

UR

HHA

LLA

HA

LA

CM

CF

OR

UR

HHA

LLA

HA

LA

CM

CF

Abubuwan amfani (scanner Tx)

Babu bayanan da aka cinye

Inda:

• OR = wuce gona da iri; 0 = Babu kuskure, 1 = Laifi
• UR = Rashin iyaka; 0 = Babu kuskure, 1 = Laifi
• HHA = Babban Ƙararrawa / Babban Ƙararrawa; 0 = Babu kuskure, 1 = Laifi
• LLA = Ƙaramar Ƙararrawa/Ƙaramar Ƙararrawa; 0 = Babu kuskure, 1 = Laifi
• HA = Babban Ƙararrawa; 0 = Babu kuskure, 1 = Laifi
• LA = Ƙararrawar Ƙararrawa; 0 = Babu kuskure, 1 = Laifi
• CM = Yanayin daidaitawa; 0 = Na al'ada, 1 = Yanayin daidaitawa
• CF = Matsayin Laifin Channel; 0 = Babu kuskure, 1 = Laifi

Ma'anar Fassara Matsayi

• Zane mai zuwa da tebur suna nuna bayani kan yadda ake fassara masu nuna matsayi.

Matsayin Nuni don Moduloli

Mai nuna alama	Matsayi	Bayani
Matsayin tsarin	Kashe	Ba a amfani da wuta akan na'urar.
	Kore	Na'urar tana aiki akai-akai.
	Koren walƙiya	Na'urar tana buƙatar ƙaddamarwa saboda ɓacewa, rashin cikawa, ko daidaitaccen tsari.
	Ja mai walƙiya	Laifin mai murmurewa yana nan.
	Ja	Laifin da ba a iya ganowa ya faru. Rashin gwajin kai yana nan ( gazawar checksum, ko gazawar gwajin rago a ikon zagayowar). Kuskuren kisa na firmware yana nan.
	Ja/kore mai walƙiya	Na'urar tana cikin yanayin gwajin kai.
Matsayin hanyar sadarwa	Kashe	Na'urar ba ta kan layi ba: • Na'urar bata kammala gwajin dup_MAC-id ba. • Ba a kunna na'ura ba - Bincika alamar halin module.
	Koren walƙiya	Na'urar tana kan layi amma ba ta da haɗin kai a cikin kafaffen jihar.
	Kore	Na'urar tana kan layi kuma tana da haɗin gwiwa a cikin kafuwar jihar.
	Ja mai walƙiya	Haɗin I/O ɗaya ko fiye suna cikin ƙayyadaddun lokaci.
	Ja	Mummunan gazawar hanyar haɗin gwiwa - Na'urar sadarwar da ta gaza. Na'urar ta gano kuskuren da ke hana ta sadarwa akan hanyar sadarwa.
	Ja/kore mai walƙiya	Na'urar sadarwa mara kyau - Na'urar ta gano kuskuren samun damar hanyar sadarwa kuma tana cikin matsalar sadarwa. Na'urar ta karɓi kuma ta karɓi Buƙatun Lalacewar Sadarwar Identity - Dogon saƙon yarjejeniya.

Mai nuna alama	Matsayi	Bayani
Matsayin tashar	Kashe	Module yana cikin yanayin CAL.
	M kore	Aiki na yau da kullun yana nan tare da abubuwan binciken tashoshi.
	Koren walƙiya	Ana daidaita tashar.
	Ja mai kauri	Babban laifin tasha yana nan.
	Ja mai walƙiya	Tashoshi yana a ƙarshen kewayon (0 mA ko 21 mA) don 1734-IE2C, 1734-IE2CK. Tashoshi yana a ƙarshen kewayon (sama ko ƙasa) don 1734-IE2V, 1734-IE2VK.

Ƙayyadaddun bayanai

Ƙididdigar shigarwa

Siffa	1734-IE2C, 1734-IE2CK	1734-IE2V, 1734-IE2VK
Yawan bayanai	2 mai ƙarewa guda ɗaya, mara ware, na yanzu	2 mai ƙarewa ɗaya, ba ware ba, juzu'itage
Ƙaddamarwa	16 bits - sama da 0…21mA 0.32 µA/cnt	15 bit plus alamar 320 µA/cnt a cikin unipolar ko yanayin bipolar
Shigar da halin yanzu	4mA 0mA	–
Shigar da kunditage	–	0… 10V mai daidaitawa (-0.0V ƙarƙashin, + 0.5V sama) ± 10V mai amfani mai daidaitawa (-0.5V ƙarƙashin, + 0.5V sama)
Cikakken daidaito(1)	0.1% Cikakken Sikeli @ 25 °C (77 ° F)
Daidaitacce tafiyar da zafi	30 ppm/°C	5 ppm/°C
Adadin sabunta shigarwar (kowane nau'i)	120 ms @ Notch = 50 Hz 100 ms @ Notch = 60 Hz (tsoho) 24 ms @ Notch = 250 Hz 12 ms @ Notch = 500 Hz
Amsar matakin shigarwa (kowane tashoshi)	80 ms @ Notch = 50 Hz 70 ms @ Notch = 60 Hz (tsoho) 16 ms @ Notch = 250 Hz 8 ms @ Notch = 500 Hz
Tsawon lokacin tace dijital	0…10,000 ms (tsoho = 0 ms)
Input impedance	60 Ω	100 kΩ
Juriya na shigarwa	60 Ω	200 kΩ
Nau'in juyawa	Delta Sigma
Yanayin kin amincewa da yanayin gama gari	120db ku
Matsakaicin ƙi na yanayin al'ada	-60 dB
Fita tace	- 3 dB settable a mai zuwa: 13.1 Hz @ Notch = 50 Hz 15.7 Hz @ Notch = 60 Hz 65.5 Hz @ Notch = 250 Hz 131 Hz @ Notch = 580 Hz
Tsarin bayanai	Alamar lamba
Matsakaicin nauyi	An kare kuskure zuwa 28.8V DC
Daidaitawa	An daidaita masana'anta

1. Ya haɗa da kashewa, riba, rashin layi, da sharuddan kuskuren maimaitawa.

Gabaɗaya Bayani

Siffa	1734-IE2C, 1734-IE2CK	1734-IE2V, 1734-IE2VK
Tushen tashar	1734-TB, 1734-TBS, 1734-TOP, ko 1734-TOPS
Matsakaicin karfin juzu'i na tushe	0.6 N•m (7 lb•in)
Manuniya, bangaren dabaru	1 kore/ja – matsayin module 1 kore/ja – Matsayin cibiyar sadarwa 2 kore/ja – Matsayin shigarwa
Matsayin maɓalli	3
POINTBus™ na yanzu, max	75mA @ 5V DC
Rashin wutar lantarki, max	0.6W @ 28.8V DC	0.75W @ 28.8V DC

Siffa	1734-IE2C, 1734-IE2CK	1734-IE2V, 1734-IE2VK
Rushewar thermal, max	2.0 BTU/h @ 28.8V DC	2.5 BTU/h @ 28.8V DC
Kadaici voltage	50V ci gaba Babu keɓewa tsakanin tashoshi ɗaya da aka gwada don jure wa 2550V DC na 60s	50V ci gaba Babu keɓewa tsakanin tashoshi ɗaya da aka gwada don jure wa 2200V DC na 60s
Wutar DC na waje
		24V DC
Ƙarar voltage, nm	24V DC
Voltage kewayon	10… 28.8V DC	10… 28.8V DC
Kayan aiki na yanzu	10mA @ 24V DC	15mA @ 24V DC
Girma (HxWxD), kimanin.	56 x 12 x 75.5 mm (2.21 x 0.47 x 2.97 in.)
Nauyi, kimanin.	33 g (1.16 oz XNUMX oz.)
Nau'in Waya (1) (2)	1- akan tashoshin sigina
Girman waya	0.25…2.5 mm2 (22…14 AWG) mai ƙarfi ko igiyar jan ƙarfe mai karewa wanda aka ƙididdige shi a 75 °C (167 °F) ko mafi girma 1.2 mm (3/64 in.) max
Ƙididdiga nau'in shinge	Babu (buɗaɗɗen salo)
Lambar yanayi ta Arewacin Amurka	T5	T4A
UKEX/ATEX lambar temp	T4
IECEx temp code	T4

1. Yi amfani da wannan bayanin nau'in madugu don tsara hanyar tuƙi kamar yadda aka bayyana a cikin Jagorar Waya ta Automation na Masana'antu da Grounding, ɗaba'ar 1770-4.1.
2. Yi amfani da wannan bayanin Rukunin Gudanarwa don tsara tsarin tafiyar jagora kamar yadda aka bayyana a cikin Jagorar shigar da matakin da ya dace.

Ƙayyadaddun Muhalli

Siffa	Daraja
Zazzabi, aiki	IEC 60068-2-1 (Ad Gwajin, Aiki Cold), IEC 60068-2-2 (Gwajin Bd, Busassun Zafin Aiki), IEC 60068-2-14 (Gwajin Nb, Aiki da Girgizar Ruwa): -20°C ≤ Ta ≤ +55°C (-4°F ≤ Ta ≤ +131°F)
Zazzabi, kewaye da iska, max	55°C (131°F)
Zazzabi, mara aiki	IEC 60068-2-1 (Gwajin Ab, Sanyi mara aiki mara fakiti) IEC 60068-2-2 (Gwajin Bb, Busassun Zafin da ba a buɗe ba) IEC 60068-2-14 (Gwajin Na, Ba'a Kunshe Ba Aiki) Shock: -40…+85°C (-40…+185°F)
Dangi zafi	IEC 60068-2-30 (Gwajin Db, Ba a kunshe Damp Zafi): 5…95% rashin kwanciyar hankali
Jijjiga	IEC60068-2-6 (Gwajin Fc, Aiki): 5g @ 10…500 Hz
Shock, aiki	EC 60068-2-27 (Gwajin Ea, Shock Ba a Kunshe): 30g
Shock, rashin aiki	EC 60068-2-27 (Gwajin Ea, Shock Ba a Kunshe): 50g
Fitarwa	Saukewa: IEC61000-6-4
ESD rigakafi	IEC6100-4-2: 6kV lamba fitarwa 8 kV iska fitarwa
Radiated RF rigakafi	IEC 61000-4-3: 10V/m tare da 1 kHz sine-wave 80% AM daga 80… 6000 MHz
EFT/B rigakafi	IEC 61000-4-4: ± 3 kV a 5 kHz akan tashoshin sigina
Rashin rigakafi na wucin gadi	IEC 61000-4-5: ± 2 kV layin duniya (CM) akan tashar jiragen ruwa masu kariya
An gudanar da rigakafin RF	IEC61000-4-6: 10V rms tare da 1 kHz sine-wave 80% AM daga 150 kHz… 80 MHz

Takaddun shaida

Takaddun shaida (lokacin da aka yiwa samfur alama)(1)	Daraja
c-UL-mu	UL Jerin Kayan Kayan Aikin Masana'antu, wanda aka ba da izini ga Amurka da Kanada. Duba UL File E65584. UL da aka jera don Class I, Rukuni na 2 A, B, C, D wurare masu haɗari, ƙwararrun Amurka da Kanada. Duba UL File E194810.
UK da CE	Kayayyakin Dokokin Burtaniya 2016 No. 1091 da Tarayyar Turai 2014/30/EU EMC Umarnin, mai yarda da: EN 61326-1; Aunawa / Sarrafa / Amfani da dakin gwaje-gwaje, Buƙatun masana'antu EN 61000-6-2; Kariyar masana'antu EN 61000-6-4; Fitar masana'antu TS EN 61131-2; Masu Gudanar da Shirye-shiryen (Sashe na 8, Yanki A & B) Kayayyakin Dokokin Burtaniya 2016 No. 1101 da Tarayyar Turai 2014/35/EU LVD, masu dacewa da: EN 61131-2; Masu Gudanar da Shirye-shiryen (Sashe na 11) Kayayyakin Dokokin Burtaniya 2012 No. 3032 da Tarayyar Turai 2011/65/EU RoHS, mai yarda da: EN IEC 63000; Takardun fasaha
Ex	Kayayyakin Dokokin Burtaniya 2016 No. 1107 da Jagoran Tarayyar Turai 2014/34/EU ATEX, mai dacewa da: EN IEC 60079-0; Gabaɗaya Bukatun EN IEC 60079-7; Halaye masu fashewa, Kariya "e" II 3 G Ex ec IIC T4 Gc DEMKO 04 ATEX 0330347X UL22UKEX2478X
RCAIM	Dokar Sadarwa ta Ostiraliya, mai yarda da: AS/NZS CISPR11; Fitar masana'antu.
IECEx	Tsarin IECEx, mai dacewa da IEC 60079-0; Gabaɗaya Bukatun IEC 60079-7; Halaye masu fashewa, Kariya "e" II 3 G Ex ec IIC T4 Gc IECEx UL 20.0072
KC	Rijistar Koriya na Kayan Watsa Labarai da Kayan Sadarwa, wanda ya dace da: Mataki na 58-2 na Dokar Waves Radio, Sashe na 3
KOWANE	Ƙungiyar Kwastam ta Rasha TR CU 020/2011 EMC Dokokin Fasaha na Rasha TR CU 004/2011 LV Dokokin Fasaha
Maroko	Arrêté ministériel n° 6404-15 du 1 er muharram 1437 Arrêté ministériel n° 6404-15 du 29 ramadan 1436
CCC	CNCA-C23-01: 2019 CCC Dokokin Aiwatar da Fashe-Tabbatar Samfuran Wutar Lantarki, mai yarda da: GB/T 3836.1-2021 Fashewar yanayi — Sashe na 1: Kayan aiki — Bukatun Gabaɗaya GB.
UKCA	2016 No. 1091 - Dokokin Daidaituwar Wutar Lantarki 2016 No. 1101 - Dokokin Kayan Wutar Lantarki (Tsaro) 2012 No. 3032 - Ƙuntatawar Amfani da Wasu Abubuwa masu haɗari a cikin Dokokin Kayan Wuta da Lantarki

Duba hanyar haɗin Takaddun Takaddun Samfur a rok.auto/certifications don Sanarwa Daidaitawa, Takaddun shaida, da sauran bayanan takaddun shaida.

Ƙarin Albarkatu

Don ƙarin bayani kan samfuran da aka bayyana a cikin wannan ɗaba'ar, yi amfani da waɗannan albarkatun. Za ka iya view ko zazzage wallafe-wallafe a rok.auto/literature.

Albarkatu	Bayani
Jagorar Zabin Modules POINT I/O, bugawa 1734-SG001	Yana ba da adaftar POINT I/O da ƙayyadaddun bayanai.
POINT I/O Digital da Analog Modules da POINTBlock I/O Modules Manual User, bugun 1734-UM001	Yana ba da dalla-dalla bayanin aikin module, tsari, da amfani don POINT I/O dijital da na'urorin analog da POINTBlock I/O modules.
Ka'idojin Waya Automation na Masana'antu, Buga 1770-4.1	Yana ba da jagororin gabaɗaya don shigar da tsarin masana'antu na Rockwell Automation.
Takaddun shaida na samfur website, rok.auto/certifications	Yana ba da sanarwar daidaito, takaddun shaida, da sauran bayanan takaddun shaida.

Tallafin Automation na Rockwell

Yi amfani da waɗannan albarkatun don samun damar bayanan tallafi.

Cibiyar Taimakon Fasaha	Nemo taimako tare da yadda ake yin bidiyo, FAQs, taɗi, dandalin masu amfani, Ilimi, da sabunta sanarwar samfur.	rok.auto/support
Lambobin Taimakon Fasaha na Gida	Nemo lambar tarho don ƙasar ku.	rok.auto/phonesupport
Cibiyar Takardun Fasaha	Shiga cikin sauri da zazzage ƙayyadaddun fasaha, umarnin shigarwa, da littattafan mai amfani.	rok.auto/techdocs
Laburaren Adabi	Nemo umarnin shigarwa, littattafai, ƙasidu, da wallafe-wallafen bayanan fasaha.	rok.auto/literature
Dacewar Samfura da Cibiyar Zazzagewa (PCDC)	Zazzage firmware, hade files (kamar AOP, EDS, da DTM), da samun damar bayanin bayanan sakin samfur.	rok.auto/pcdc

Bayanin Takardu
Bayanin ku yana taimaka mana samar da buƙatun takaddun ku mafi kyau. Idan kuna da wasu shawarwari kan yadda ake inganta abubuwan mu, cika fom ɗin a rok.auto/docfeedback.

Waste Electric and Electronic Equipment (WEEE)

• A ƙarshen rayuwa, ya kamata a tattara wannan kayan aiki daban daga duk wani sharar gida da ba a ware ba.
• Rockwell Automation yana kula da bayanan yarda da muhalli na yanzu akan sa websaiti a rok.auto/pec.
• Haɗa tare da mu. rockwellautomation.com fadada yiwuwar ɗan adam®
• AMERICAS: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
• EUROPE/MIDLE EAST/AFRICA: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2663 0600, Fax: (32)2 663 0640
• ASIA PACIFIC: Rockwell Automation SEA Pte Ltd, 2 Corporation Road, #04-05, Main Lobby, Corporation Place, Singapore 618494, Tel: (65) 6510 6608, FAX: (65) 6510 6699
• UNITED MULKI: Rockwell Automation Ltd., Pitfield, Kiln Farm, Milton Keynes, MK11 3DR, United Kingdom, Tel: (44) (1908) 838-800, Fax: (44) (1908) 261-917
• Allen-Bradley, faɗaɗa yuwuwar ɗan adam, Factory Talk, POINT 1/0, POINTBus, Rockwell Automation, Studio 5000 Logix Designer, da TechConnect alamun kasuwanci ne na Rockwell Automation, Inc.
• ControlNet, DeviceNet, da EtherNet/IP alamun kasuwanci ne na ODVA, Inc.
• Alamomin kasuwanci da ba na Rockwell Automation mallakin kamfanoninsu ne.
• Buga 1734-IN027E-EN-E - Yuni 2023 | Bugawa na Supersedes 1734-IN027D-EN-E - Disamba 2018
• Haƙƙin mallaka © 2023 Rockwell Automation, Inc. Duk haƙƙin mallaka.

Takardu / Albarkatu

Allen-Bradley 1734-IE2C POINT IO 2 na yanzu da 2 Vol.tage Input Analog Modules [pdf] Jagoran Jagora 1734-IE2C POINT IO 2 Yanzu da 2 Voltage Input Analog Modules, 1734-IE2C, POINT IO 2 Yanzu da 2 Vol.tage Input Analog Modules, Yanzu da 2 Voltage Input Analog Modules, Input Analog Modules, Analog Modules, Modules

Magana

• Manual mai amfani