U-Allen-Bradley 1734-IE2C POINT IO 2 Yamanje kanye ne-2 Voltage Amamojula we-Analog wokufaka

Ulwazi Lomkhiqizo

• I-POINT I/O 2 Yamanje kanye no-2 VoltagI-e Input Analog Modules awuchungechunge lwamamojula aklanyelwe ukufakwa kuzilungiselelo zezimboni.
• Ziza ngezinombolo zekhathalogi ehlukahlukene, kufaka phakathi i-1734-IE2C, 1734-IE2CK, 1734-IE2V, ne-1734-IE2VK. Amamojula ochungechunge C ahlanganiswe ngokusemthethweni ukuze avikeleke okwengeziwe.
• Lawa mamojula ahlinzeka okwamanje kanye nevolumutage amakhono okokufaka analogi, okuvumela ukuqapha okunembile kanye nokulawula amasignali kagesi. Afakwe amabhulokhi wetheminali akhiphekayo ukuze afakwe kalula futhi alungiswe.
• Umkhiqizo uhambisana ne-CE Low VoltagI-e Directive (LVD) futhi kufanele inikezwe amandla avela emthonjeni othobelana ne-Safety Extra Low Voltage (SELV) noma I-Protected Extra Low Voltage (PELV) ukuqinisekisa ukuphepha.
• Imanuwali yomsebenzisi inikeza imiyalelo enemininingwane yokufaka, ukumisa, izintambo, nokuxhumana nemojula. Kuhlanganisa futhi ulwazi mayelana nezinkomba zesimo nokucaciswa.

Imiyalo yokusetshenziswa komkhiqizo

1. Ngaphambi kokuthi Uqale:
   • Funda imanuwali yomsebenzisi nanoma yiziphi izinsiza ezengeziwe ezisohlwini lokufakwa, ukumisa, kanye neziqondiso zokusebenza.
   • Zijwayeze nezidingo zokufaka nemithetho esebenzayo, amakhodi, namazinga.
2. Faka i-Mounting Base:
   • Landela imiyalelo enikeziwe ukuze ufake kahle isisekelo sokukhweza semojuli.
3. Faka i-I/O Module:
   • Bheka kumanuwali yomsebenzisi ukuze uthole imiyalelo yesinyathelo ngesinyathelo yokufaka imojuli ye-I/O kusisekelo sokukhweza.
4. Faka I-Removable Terminal Block:
   • Landela imiyalelo enikeziwe ukuze ufake ibhulokhi yetheminali ekhiphekayo ukuze kube lula ukufaka izintambo nokunakekelwa.
5. Susa Isisekelo Sokukhweza:
   • Uma kudingeka, bheka imanuwali yomsebenzisi ukuze uthole isiqondiso sokususa isisekelo sokukhweza.
6. Faka i-Module:
   • Landela imiyalelo yezintambo enikeziwe ukuze uxhume kahle imojuli ohlelweni lukagesi.
7. Xhumana Nemojuli Yakho:
   • Bheka kumanuwali yomsebenzisi ngolwazi lokuthi ungaxhumana kanjani nemojuli ngezinjongo zokuqapha nokulawula.
8. Tolika Izikhombisi Zesimo:
   • Funda ukuthi ungazihumusha kanjani izinkomba zesimo kumojuli ngokubhekisela kumanuwali yomsebenzisi.

Qaphela: Ukuze uthole imininingwane eyengeziwe, ukucaciswa, kanye nolwazi lokuphepha, sicela ubheke imanuwali yomsebenzisi enikezwe nomkhiqizo.

Imiyalelo yokufaka

Imiyalelo Yoqobo

• I-POINT I/O 2 Yamanje kanye ne-2 Voltage Amamojula we-Analog wokufaka
• Izinombolo Zekhathalogi 1734-IE2C, 1734-IE2CK, 1734-IE2V, 1734-IE2VK, uchungechunge C
• Izinombolo zekhathalogi ezinezijobelelo 'K' zihlanganiswe ngokusemthethweni futhi ukucaciswa kwazo kuyafana namakhathalogi anamekiwe angagunyaziwe.

Isifinyezo Sezinguquko

• Lolu shicilelo luqukethe ulwazi olulandelayo olusha noma olubuyekeziwe. Lolu hlu luhlanganisa izibuyekezo ezibalulekile kuphela futhi aluhloselwe ukubonisa zonke izinguquko.
• QAPHELA: Funda lo mbhalo kanye nemibhalo esohlwini Lwezinsiza Ezengeziwe mayelana nokufakwa, ukumiswa kanye nokusebenza kwalo mshini ngaphambi kokufaka, ukulungisa, ukusebenzisa noma ukugcina lo mkhiqizo. Abasebenzisi kudingeka bazijwayeze ngemiyalo yokufaka neyokufaka izintambo ngaphezu kwezimfuneko zawo wonke amakhodi asebenzayo, imithetho, namazinga.
• Imisebenzi ehlanganisa ukufakwa, ukulungisa, ukufaka insizakalo, ukusetshenziswa, ukuhlanganisa, ukuqaqa, nokulungiswa kudingeka ukuba kwenziwe ngabasebenzi abaqeqeshwe ngokufanelekile ngokuhambisana nekhodi yokusebenza esebenzayo. Uma lesi sisetshenziswa sisetshenziswa ngendlela engacaciswanga ngumkhiqizi, ukuvikela okuhlinzekwa yimpahla kungase konakaliswe.
• QAPHELA: Ukuhambisana ne-CE Low VoltagI-e Directive (i-LVD), lesi sisetshenziswa kumele sinikezwe amandla esivela emthonjeni othobelana ne-Safety Extra Low Voltage (SELV) noma I-Protected Extra Low Voltage (PELV).

ISEXWAYISO:

• Vikela noma yikuphi ukuxhumana kwangaphandle okuhambisana nalesi sisetshenziswa ngokusebenzisa izikulufu, amaletshi okuslayida, izixhumi ezinentambo, noma ezinye izindlela ezihlinzekwe ngalo mkhiqizo.
• Unganqamuli okokusebenza ngaphandle uma amandla esusiwe noma indawo yaziwa njengengenabungozi.

Imvelo kanye Ebiyelwe

• QAPHELA: Lo mshini uhloselwe ukusetshenziswa endaweni yezimboni ye-Pollution Degree 2, e-overvoltage Izinhlelo zokusebenza zeSigaba II (njengoba kuchazwe ku-EN/IEC 60664-1), endaweni yokuphakama engafika ku-2000 m (6562 ft) ngaphandle kokuncishiswa.
• Lokhu okokusebenza akuhloselwe ukusetshenziswa ezindaweni okuhlalwa kuzo futhi akumele kunikeze ukuvikeleka okufanele ezinsizakalweni zokuxhumana ngomsakazo ezindaweni ezinjalo.
• Lo mshini uhlinzekwa njengomshini ovulekile ukuze usetshenziswe endlini. Kumelwe igxunyekwe ngaphakathi kwendawo ebiyelwe eklanyelwe ngokufanele lezo zimo zemvelo ezizoba khona futhi eziklanywe ngokufanelekile ukusiza ukuvimbela ukulimala komuntu okubangelwa ukufinyeleleka kwezingxenye eziphilayo. Indawo ebiyelwe kufanele ibe nezindawo ezifanele zokunqanda ilangabi ukusiza ukuvimbela noma ukunciphisa ukusabalala kwelangabi, ukuthobelana nesilinganiso sokusabalala kwelangabi esingu-5VA noma sigunyazwe isicelo uma singekho insimbi. Ingaphakathi lendawo ebiyelwe kufanele lifinyeleleke kuphela ngokusebenzisa ithuluzi. Izigaba ezilandelayo zalolu shicilelo zingaqukatha ulwazi olwengeziwe mayelana nezilinganiso zohlobo oluthile lwesivikelo oludingekayo ukuze kuthotshelwe izitifiketi ezithile zokuphepha komkhiqizo.

Ngaphezu kwalokhu kushicilelwa, bona okulandelayo:

• I-Industrial Automation Wiring and Grounding Guidelines, ukushicilelwa kwe-1770-4.1, ukuze uthole izimfuneko zokufakwa ezengeziwe.
• I-NEMA Standard 250 kanye ne-EN/IEC 60529, njengoba kusebenza, ukuze uthole izincazelo zamadigri okuvikela ahlinzekwa yizindawo ezivalekile.

Vimbela Ukukhishwa Kwe-Electrostatic

• QAPHELA: Lesi sixhobo siyazwela ekukhishweni kwe-electrostatic, okungadala umonakalo wangaphakathi futhi kuthinte ukusebenza okuvamile. Landela le mihlahlandlela uma uphatha lesi sisetshenziswa:
• Thinta into esekelwe phansi ukuze ukhiphe okungama-static.
• Gqoka ibhande eliphansi elisemthethweni.
• Ungazithinti izixhumi noma izikhonkwane emabhodini ezingxenye.
• Ungathinti izingxenye zesekethe ngaphakathi kwemishini.
• Sebenzisa indawo yokusebenza ephephile, uma ikhona.
• Gcina okokusebenza emaphaketheni afanele avikelekile lapho engasetshenziswa.

Ukuvunyelwa Kwendawo Eyingozi YaseNyakatho Melika

• Ulwazi Olulandelayo Luyasebenza Lapho Usebenzisa Lesi Sisetshenziswa Ezindaweni Eziyingozi.
• Imikhiqizo ebhalwe ukuthi “CL I, DIV 2, GP A, B, C, D” ifanele ukusetshenziswa Ekilasini I Division 2 Amaqembu A, B, C, D, Izindawo Eziyingozi kanye nezindawo ezingenabungozi kuphela. Umkhiqizo ngamunye unikezwe izimpawu ku-nameplate yokulinganisa ebonisa ikhodi yendawo eyingozi yokushisa. Uma kuhlanganiswa imikhiqizo ngaphakathi kwesistimu, ikhodi yezinga lokushisa elibi kakhulu (inombolo “T” ephansi kunazo zonke) ingase isetshenziselwe ukusiza ukunquma ikhodi yokushisa yonkana yesistimu. Inhlanganisela yezisetshenziswa kusistimu yakho ingaphansi kophenyo Iziphathimandla zendawo Ezinegunya ngesikhathi sokufakwa.

ISEXWAYISO: Ingozi Yokuqhuma

• Unganqamuli okokusebenza ngaphandle uma amandla esusiwe noma indawo yaziwa njengengenabungozi.
• Unganqamuli ukuxhumeka kulesi sisetshenziswa ngaphandle uma amandla esusiwe noma indawo yaziwa ngokuthi ayinabungozi.
• Vikela noma yikuphi ukuxhumana kwangaphandle okuhambisana nalesi sisetshenziswa ngokusebenzisa izikulufu, amaletshi okuslayida, izixhumi ezinentambo, noma ezinye izindlela ezihlinzekwe ngalo mkhiqizo.
• Ukushintshanisa izingxenye kungase kukhinyabeze ukufaneleka Kwesigaba I Sesigaba 2.

Ukuvunyelwa Kwendawo Eyingozi Yase-UK kanye ne-Europe

Okulandelayo kuyasebenza emikhiqizweni emakwe II 3 G:

• Zihloselwe ukusetshenziswa ezindaweni ezingase zibe neziqhumane njengoba kuchazwe umthethonqubo we-UKEX 2016 No. 1107 kanye ne-European Union Directive 2014/34/EU futhi kutholwe ukuthi ithobelana Nezimfuneko Ezibalulekile Zezempilo Nokuphepha eziphathelene nokuklanywa nokwakhiwa kwezisetshenziswa zeSigaba 3 ihloselwe ukusetshenziswa endaweni ye-Zone 2 okungenzeka ibe neziqhumane, enikezwe kuSheduli 1 ye-UKEX kanye neSijobelelo II salo Myalelo.
• Ukuthobelana Nezimfuneko Ezibalulekile Zezempilo Nokuphepha kuqinisekiswe ngokuhambisana ne-EN IEC 60079-7 kanye ne-EN IEC 60079-0.
• Ingabe Iqembu Lezinto Ezisetshenziswayo II, Isigaba sesi-3, futhi ithobelana Nezimfuneko Ezibalulekile Zezempilo Nokuphepha ezihlobene nokuklanywa nokwakhiwa kwamathuluzi anjalo anikezwe kuShejuli 1 ye-UKEX kanye ne-Annex II ye-EU Directive 2014/34/EU. Bheka i-UKEx kanye ne-EU Declaration of Conformity ku-rok.auto/certifications ukuze uthole imininingwane.
• Uhlobo lwesivikelo luyi-Ex ec IIC T4 Gc ngokuya nge-EN IEC 60079-0:2018, IZIQHUMAZO EZILISHUBILE - INGXENYE 0: IZIHLOKO – IZIDINGO EZIJWAYELEKILE, Idethi Yokukhishwa 07/2018, kanye ne-CENELEC ENIEC 60079-7:2015:1 Umkhathi oqhumayo. Ukuvikelwa kwezisetshenziswa ngokukhuphuka kokuphepha “e”.
• Ukuthobelana Nezimiso Ezijwayelekile EN IEC 60079-0:2018, IZIBUKA EZIQHUBEKAYO – INGXENYE 0: IZIsetshenziswa – IZIDINGO EZIJWAYELEKILE, Usuku Lokukhishwa 07/2018, CENELEC EN IEC 60079-
  7:2015+A1:2018 Isimo sezulu esiqhumayo. Ukuvikelwa kwezisetshenziswa ngokukhuphuka kokuphepha “e”, inombolo yesitifiketi senkomba DEMKO 04 ATEX 0330347X kanye ne-UL22UKEX2478X.
• Kuhloselwe ukusetshenziswa ezindaweni lapho iziqhumane ezibangelwa amagesi, umusi, inkungu, noma umoya kungenzeki khona, noma okungenzeka kwenzeke ngokungavamile nangesikhathi esifushane. Izindawo ezinjalo zihambisana nokuhlukaniswa kweZone 2 ngokuvumelana nomthethonqubo we-UKEX 2016 No. 1107 kanye nomyalelo we-ATEX 2014/34/EU.
• Ingase ibe nezinombolo zekhathalogi ezilandelwa u-“K” ukuze zibonise inketho yokwemboza evumelanayo.

Ukugunyazwa Kwendawo Eyingozi ye-IEC

• Okulandelayo kuyasebenza emikhiqizweni emakwe ngesitifiketi se-IECEx:
• Ihloselwe ukusetshenziswa ezindaweni lapho iziqhumane ezibangelwa amagesi, umusi, inkungu, noma umoya kungenzeki khona, noma okungenzeka zenzeke ngokungavamile nangesikhathi esifushane. Izindawo ezinjalo zihambisana nokuhlukaniswa kweZone 2 ne-IEC 60079-0.
• Uhlobo lwesivikelo yi-Ex eC IIC T4 Gc ngokuya nge-IEC 60079-0 kanye ne-IEC 60079-7.
• Ukuthobelana Namazinga IEC 60079-0, Isimo sezulu esiqhumayo - Ingxenye 0: Izisetshenziswa - Izidingo ezijwayelekile, Uhlelo 7, Usuku Lokubuyekeza 2017 kanye ne-IEC 60079-7, I-IEC 5.1-2017, 7 idethi yokubuyekeza yango-20.0072, Isimo sezulu esiqhumayo - Ingxenye XNUMX: Ukuvikelwa kwezisetshenziswa ngokukhuphuka kokuphepha “e ”, inombolo yesitifiketi se-IECEx ye-IECEx UL XNUMXX.
• Ingase ibe nezinombolo zekhathalogi ezilandelwa u-“K” ukuze zibonise inketho yokwemboza evumelanayo.

ISEXWAYISO: Izimo Ezikhethekile Zokusetshenziswa Ngokuphephile

• Lo mshini awumelani nokukhanya kwelanga noma eminye imithombo yemisebe ye-UV.
• Lezi zisetshenziswa zizofakwa endaweni ebiyelwe eqinisekisiwe yase-UKEX/ATEX/IECEx Zone 2 enesilinganiso esincane sokuvikela sokungenwa okungenani esingu-IP54 (ngokuvumelana ne-EN/IEC 60079-0) futhi sisetshenziswe endaweni engengaphezu kwe-Pollution Degree 2 ( njengoba kuchazwe ku-EN/IEC 60664-1) uma isetshenziswa ezindaweni Zone 2. Indawo ebiyelwe kufanele ifinyeleleke kuphela ngokusebenzisa ithuluzi.
• Lo mshini uzosetshenziswa ngaphakathi kwezilinganiso zawo ezichazwe yi-Rockwell Automation.
• Ukuvikelwa kwesikhashana kuzohlinzekwa okubekwe ezingeni elingeqile ku-140% wevolumu elinganiselwe ephezulutage kumatheminali okuhlinzeka ngezinto zokusebenza.
• Imiyalo ekubhukwana lomsebenzisi izogcinwa.
• Lo mshini kufanele usetshenziswe kuphela nezindiza zasemuva eziqinisekisiwe ze-UKEX/ATEX/IECEx ze-Rockwell Automation.
• I-Earthing yenziwa ngokufakwa kwamamojula kumzila wesitimela.
• Amadivayisi azosetshenziswa endaweni engengaphezu kwe-Pollution Degree 2.
• Isesibili se-transformer yamanje ngeke sivuleleke uma sisetshenziswa Ezindaweni Zekilasi I, Zone 2.

QAPHELA:

• Uma lesi sisetshenziswa sisetshenziswa ngendlela engacaciswanga ngumkhiqizi, isivikelo esihlinzekwa yimpahla singase sonakaliswe.
• Funda lo mbhalo kanye nemibhalo esohlwini Lwezinsiza Ezengeziwe mayelana nokufakwa, ukumiswa, kanye nokusebenza kwalo mshini ngaphambi kokufaka, ukulungisa, ukusebenzisa, noma ukugcina lo mkhiqizo. Abasebenzisi kudingeka bazijwayeze ngemiyalo yokufaka neyokufaka izintambo ngaphezu kwezimfuneko zawo wonke amakhodi asebenzayo, imithetho, namazinga.
• Ukufakwa, ukulungiswa, ukufakwa emsebenzini, ukusetshenziswa, ukuhlanganisa, ukuhlakazwa, nokugcinwa kufanele kwenziwe ngabasebenzi abaqeqeshwe ngokufanele ngokuhambisana nekhodi yokusebenza esebenzayo. Uma kwenzeka ukungasebenzi kahle noma umonakalo, akukho mizamo yokulungisa okufanele yenziwe. Imojula kufanele ibuyiselwe kumkhiqizi ukuze ilungiswe. Ungayihlehli imojuli.
• Lesi sisetshenziswa sigunyazwe ukuthi sisetshenziswe kuphela ngaphakathi kwezinga lokushisa lomoya elizungezile elingu -20…+55 °C (-4…+131 °F). Okokusebenza akumele kusetshenziswe ngaphandle kwalolu banga.
• Sebenzisa kuphela indwangu ethambile eyomile ephikisayo ukuze usule izinto zokusebenza. Ungasebenzisi noma yiziphi izinto zokuhlanza.

Ngaphambi kokuthi Uqale

• Lolu chungechunge C lwe-POINT I/O™ 2 lwamanje no-2 voltagAmamojula we-analog wokufaka angasetshenziswa nalokhu okulandelayo:
• Ama-adaptha e-DeviceNet® kanye ne-PROFIBUS
• Ama-adaptha e-ControlNet® kanye ne-EtherNet/IP™, esebenzisa inguqulo yohlelo lokusebenza ye-Studio 5000 Logix Designer® engu-20 noma eyakamuva.
• Bona izibalo ukuze uzijwayeze nezingxenye ezinkulu zemojuli, uqaphele ukuthi umhlangano wesisekelo sezintambo ungenye yalokhu okulandelayo:
• I-1734-TB noma i-1734-TBS POINT I/O isisekelo setheminali eneziqephu ezimbili, ehlanganisa ibhulokhi yetheminali ekhiphekayo engu-1734-RTB noma 1734-RTBS, kanye nesisekelo sokukhweza esingu-1734-MB
• I-1734-TOP noma i-1734-TOPS POINT I/O isisekelo socezu olulodwa

I-POINT I/O Module ene-1734-TB noma i-1734-TBS Base

Incazelo Yengxenye

 

	Incazelo		Incazelo
1	Indlela yokukhiya imojuli	6	1734-TB noma 1734-TBS isisekelo sokukhweza
2	Ilebula ebhalekayo ngesilayidi	7	Izingcezu eziseceleni ezihlanganayo
3	Imojuli ye-I/O efakekayo	8	Ukhiye womshini (owolintshi)
4	Isibambo se-terminal block (RTB) esikhiphekayo	9	I-DIN rail locking screw (iwolintshi)
5	Ibhulokhi yetheminali ekhiphekayo ene-screw (1734-RTB) noma i-spring clamp (1734-RTBS)	10	Umdwebo wezintambo zemojuli

I-POINT I/O Module ene-1734-TOP noma i-1734-TOPS Base

Incazelo Yengxenye

	Incazelo		Incazelo
1	Indlela yokukhiya imojuli	6	Izingcezu eziseceleni ezihlanganayo
2	Ilebula ebhalekayo ngesilayidi	7	Ukhiye womshini (owolintshi)
3	Imojuli ye-I/O efakekayo	8	I-DIN rail locking screw (iwolintshi)
4	Isibambo se-terminal block (RTB) esikhiphekayo	9	Umdwebo wezintambo zemojuli
5	Isisekelo setheminali yesiqephu esisodwa esinesikulufu (1734-TOP) noma i-spring clamp (1734-TOPS)

Faka i-Mounting Base

• Ukuze ufake isisekelo sokukhweza kuloliwe we-DIN (ingxenye yenombolo ye-Allen-Bradley® 199-DR1; 46277-3; EN50022), qhubeka kanje:
• QAPHELA: Lo mkhiqizo usekelwe kumzila wesitimela we-DIN ukuya emhlabathini we-chassis. Sebenzisa umzila wesitimela we-DIN wensimbi we-zinc-plated chromate-passivated ukuze uqinisekise ukubekwa phansi okufanele. Ukusetshenziswa kwezinye izinto zikaloliwe ze-DIN (ngokwesiboneloample, i-aluminium noma ipulasitiki) engagqwala, i-oxidize, noma amakhondatha ampofu, ingaholela ekusekelweni okungafanele noma okuphakathi. Vikela isitimela se-DIN endaweni ekhwezwayo cishe njalo ngo-200 mm (7.8 in.) futhi usebenzise amahange ekugcineni ngendlela efanele. Qiniseka ukuthi ugawula ujantshi we-DIN ngendlela efanele. Bheka i-Industrial Automation Wiring and Grounding Guidelines, ukushicilelwa kwe-Rockwell Automation 1770-4.1, ukuze uthole ulwazi olwengeziwe.
• ISEXWAYISO: Uma isetshenziswa Ekilasini I, Isigaba 2, endaweni eyingozi, lesi sisetshenziswa kumele sigxunyekwe endaweni ebiyelwe ngendlela efanele ngendlela yokufaka izintambo efanele ethobelana namakhodi alawulayo kagesi.

1. Misa isisekelo sokukhweza sime phezulu ngaphezu kwamayunithi afakiwe (i-adaptha, ukunikezwa kwamandla, noma imojuli ekhona).
2. Shelelisela isisekelo sokukhweza phansi uvumele izingcezu eziseceleni ezixhumene ukuthi zibandakanye imojuli eseduze noma i-adaptha.
3. Cindezela ngokuqinile ukuze uhlale isisekelo sokukhweza kuloliwe we-DIN. Isisekelo sokukhweza singena endaweni.
   • Qiniseka ukuthi isikulufu sokukhiya isitimela esiwolintshi se-DIN sisendaweni evundlile nokuthi sisebenzise ujantshi we-DIN.
4. QAPHELA: Sebenzisa isiphetho se-adaptha yakho noma imojula yesixhumi esibonakalayo ukuze umboze ukuxhumana okuveziwe kusisekelo sokugcina sokukhweza sikaloliwe we-DIN. Ukwehluleka ukwenza lokho kungaholela ekulimaleni kwemishini noma ukulimala ngenxa yokushaqeka kukagesi.

Faka i-I/O Module

• Imojula ingafakwa ngaphambi noma ngemva kokufakwa kwesisekelo. Qiniseka ukuthi isisekelo sokukhweza sifakwe ukhiye ngendlela efanele ngaphambi kokufaka imojuli kusisekelo sokukhweza.
• Ukwengeza, qiniseka ukuthi isikulufu sokukhiya isisekelo sokukhweza sibekwe sivundlile sibhekiselwe kusisekelo.
• ISEXWAYISO: Uma ufaka noma ukhipha imojuli ngenkathi amandla e-backplane evuliwe, kungenzeka i-arc kagesi. Lokhu kungabangela ukuqhuma ekufakweni kwendawo eyingozi. Qiniseka ukuthi ugesi ususiwe noma indawo ayinabungozi ngaphambi kokuqhubeka.
• I-arcing kagesi ephindaphindiwe ibangela ukuguga ngokweqile koxhumana nabo kukho kokubili imojuli nesixhumi sayo sokukhwelana. Othintana nabo abagugile bangadala ukumelana nogesi okungase kuthinte ukusebenza kwemojuli.

Ukuze ufake imojuli, qhubeka kanje

1. Sebenzisa i-screwdriver ene-blade ukuze uzungezise i-keyswitch kusisekelo esikhwezayo njengokuhamba kwewashi kuze kube yilapho inombolo edingekayo yohlobo lwemojuli oyifakayo iqondana nenotshi kusisekelo.
2. Qinisekisa ukuthi isikulufu sokukhiya ujantshi we-DIN sisendaweni evundlile. Awukwazi ukufaka imojuli uma indlela yokukhiya ivuliwe.
3. Faka imojuli ngqo phansi kusisekelo sokukhweza bese ucindezela ukuze uvikele. Imojula ikhiyeka endaweni.

Faka I-Removable Terminal Block

• I-RTB ihlinzekwa ngomhlangano wakho wesisekelo sezintambo. Ukuze ususe, donsa isibambo se-RTB.
• Lokhu kuvumela isisekelo sokukhweza ukuthi sisuswe futhi sishintshwe njengoba kudingekile ngaphandle kokukhipha noma iyiphi izintambo.
• Ukuze uphinde ufake i-Removable Terminal Block, qhubeka kanje.
• ISEXWAYISO: Uma uxhuma noma unqamula i-RTB ngamandla aseceleni kwenkundla esetshenziswayo, kungenzeka i-arc kagesi.
• Lokhu kungabangela ukuqhuma ekufakweni kwendawo eyingozi.
• Qiniseka ukuthi ugesi ususiwe noma indawo ayinabungozi ngaphambi kokuqhubeka.

1. Faka isiphetho ngokuphambene nesibambo kuyunithi yesisekelo.
   • Lesi siphetho sinesigaba esigobile esisebenzisana nesisekelo sezintambo.
2. Zungezisa ibhulokhi yetheminali kusisekelo sezintambo ize izikhiyele endaweni yayo.
3. Uma imojuli ye-I/O ifakiwe, cindezela isibambo se-RTB endaweni yemojuli.

ISEXWAYISO: Ukuze uthole i-1734-RTBS kanye ne-1734-RTB3S, ukuze uxhume futhi uvule ucingo, faka i-screwdriver ene-bladed (inombolo yekhathalogi 1492-N90 - 3 mm ububanzi beblade) endaweni ecishe ibe ngu-73 ° (i-blade surface ihambisana nendawo ephezulu yokuvula. ) bese uphushela phezulu kancane.

ISEXWAYISO: Ukuze uthole i-1734-TOPS kanye ne-1734-TOP3S, ukuze uxhume futhi uvule ucingo, faka i-screwdriver ene-bladed (inombolo yekhathalogi 1492-N90 - 3 mm ububanzi beblade) endaweni ecishe ibe ngu-97 ° (i-blade surface ihambisana nendawo ephezulu yokuvula. ) bese ucindezela ukungena (ungasunduzi uye phezulu noma phansi).

Susa Isisekelo Sokukhweza

• Ukuze ususe isisekelo sokukhweza, kufanele ususe noma iyiphi imojuli efakiwe kanye nemojuli efakwe esisekelweni esingakwesokudla. Susa ibhulokhi yetheminali ekhiphekayo, uma inezintambo.
• ISEXWAYISO: Uma ufaka noma ukhipha imojuli ngenkathi amandla e-backplane evuliwe, kungenzeka i-arc kagesi. Lokhu kungabangela ukuqhuma ekufakweni kwendawo eyingozi.
• Qiniseka ukuthi ugesi ususiwe noma indawo ayinabungozi ngaphambi kokuqhubeka. I-arcing kagesi ephindaphindiwe ibangela ukuguga ngokweqile koxhumana nabo kukho kokubili imojuli nesixhumi sayo sokukhwelana.
• Othintana nabo abagugile bangadala ukumelana nogesi okungase kuthinte ukusebenza kwemojuli.
• ISEXWAYISO: Uma uxhuma noma unqamula I-Removable Terminal Block (RTB) kusetshenziswe amandla aseceleni kwenkundla, i-arc kagesi ingenzeka. Lokhu kungabangela ukuqhuma ekufakweni kwendawo eyingozi.
• Qiniseka ukuthi ugesi ususiwe noma indawo ayinabungozi ngaphambi kokuqhubeka.

1. Khipha isibambo se-RTB kumojuli ye-I/O.
2. Donsa isibambo se-RTB ukuze ususe ibhulokhi yetheminali ekhiphekayo.
3. Cindezela ilokhi yemojuli ngaphezulu kwemojuli.
4. Donsa imojuli ye-I/O ukuze uyisuse esisekelweni.
5. Phinda izinyathelo 1, 2, 3, no-4 ukuze uthole imojuli engakwesokudla.
6. Sebenzisa i-screwdriver enezinsimbi ezincane ukuzungezisa isikulufu sokukhiya esisawolintshi sime mpo. Lokhu kukhulula indlela yokukhiya.
7. Phakamisa uqonde phezulu ukuze ususe.

Ucingo lweModyuli

Ukuze uxhume imojuli, bheka imidwebo namathebula.
ISEXWAYISO: Uma uxhuma noma unqamula izintambo ngenkathi amandla aseceleni kwenkundla evuliwe, ukufakwa kwe-arc kagesi. Qiniseka ukuthi ugesi ususiwe noma indawo ayinabungozi ngaphambi kokuqhubeka.

I-POINT I/O 2 Yamanje kanye ne-2 Voltage Amamojula we-Analog Okukhiphayo

• CHAS GND = Indawo ye-Chassis
• C= Okuvamile
• V = Ukunikezela

Umfanekiso 1 – POINT I/O 2 Ukufakwa Kwamanje Kwemojula Yokufaka Intambo ye-Analog – 1734-IE2C, 1734-IE2CK

• In = Ishaneli yokufaka
• CHAS GND = Indawo ye-Chassis
• C = Common
• V = 12/24V DC ukunikezwa
• Qaphela: Akuvikelwe, 0.3 A max

Isiteshi	Okokufaka kwamanje	I-Chassis Ground	Okuvamile	Ukunikezela
0	0	2	4	6
1	1	3	5	7

Umfanekiso 2 – IPHUZU I/O 2 Umqtage I-Input Analog Module Wiring – 1734-IE2V, 1734-IE2VK

• Ku = Ishaneli yokufaka
  • I-CHAS GND = I-Chassis ground
• C= Okuvamile
  • V = Ukunikezwa kwe-DC 12/24V
• Qaphela: Akuvikelwe, 0.3 A max

Isiteshi	Voltage Ukufaka	I-Chassis Ground	Okuvamile	Ukunikezela
0	0	2	4	6
1	1	3	5	7

• I-12/24V DC inikezwa ibhasi lamandla enkambu yangaphakathi.
• QAPHELA: Lo mkhiqizo usekelwe kumzila wesitimela we-DIN ukuya emhlabathini we-chassis. Sebenzisa umzila wesitimela we-DIN wensimbi we-zinc-plated chromate-passivated ukuze uqinisekise ukubekwa phansi okufanele.
• Ukusetshenziswa kwezinye izinto zikaloliwe ze-DIN (ngokwesiboneloample, i-aluminium noma ipulasitiki) engagqwala, i-oxidize, noma amakhondatha ampofu, ingaholela ekusekelweni okungafanele noma okuphakathi.
• Vikela isitimela se-DIN endaweni ekhwezwayo cishe njalo ngo-200 mm (7.8 in.) futhi usebenzise amahange ekugcineni ngendlela efanele.
• Qiniseka ukuthi ugawula ujantshi we-DIN ngendlela efanele. Bheka i-Industrial Automation Wiring and Grounding Guidelines, ukushicilelwa kwe-Rockwell Automation 1770-4.1, ukuze uthole ulwazi olwengeziwe.

Xhumana Nemojuli Yakho

• Amamojula we-POINT I/O athumela (khiqiza) futhi amukele (sebenzisa) idatha ye-I/O (imilayezo). Ubeka le datha kumemori yokucubungula. Lawa mamojula akhiqiza amabhayithi angu-6 edatha yokufaka (isithwebuli i-Rx) kanye nedatha yesimo sephutha. Lawa mamojula awadli idatha ye-I/O (isithwebuli Tx).

Imephu Yedatha Ezenzakalelayo

• Usayizi womlayezo: 6 Amabhayithi

15

14

13

12

11

10

09

08

07 06

05

04

03

02

01

00

Ikhiqiza (iskena Rx)

Ishaneli yokufaka 0 – ibhayithi ephezulu

Ishaneli yokufaka 0 – ibhayithi ephansi

Ishaneli yokufaka 1 – ibhayithi ephezulu

Ishaneli yokufaka 1 – ibhayithi ephansi

Ibhayithi yesimo yesiteshi 1

Ibhayithi yesimo yesiteshi 0

OR

UR

HHA

LLA

HA

LA

CM

CF

OR

UR

HHA

LLA

HA

LA

CM

CF

Isebenzisa (isikena Tx)

Ayikho idatha esetshenzisiwe

Kuphi:

• OR = Ububanzi; 0 = Alikho iphutha, 1 = Iphutha
• UR = Ibanga eliphansi; 0 = Alikho iphutha, 1 = Iphutha
• HHA = I-alamu ephezulu/ephezulu; 0 = Alikho iphutha, 1 = Iphutha
• LLA = I-alamu ephansi/ephansi; 0 = Alikho iphutha, 1 = Iphutha
• HA = I-alamu ephezulu; 0 = Alikho iphutha, 1 = Iphutha
• LA = I-alamu ephansi; 0 = Alikho iphutha, 1 = Iphutha
• CM = Imodi yokulinganisa; 0 = Okuvamile, 1 = Imodi yokulinganisa
• CF = Isimo Sephutha Lesiteshi; 0 = Alikho iphutha, 1 = Iphutha

Humusha Izikhombisi Zesimo

• Umdwebo olandelayo kanye nethebula likhombisa ulwazi lokuthi zingatolika kanjani izinkomba zesimo.

Isimo Senkomba samamojula

Inkomba	Isimo	Incazelo
Isimo semojuli	Valiwe	Awekho amandla asetshenziswa kudivayisi.
	Okuhlaza	Idivayisi isebenza ngokujwayelekile.
	Okuluhlaza okotshani	Idivayisi idinga ukusetshenziswa ngenxa yokushoda, okungaphelele, noma ukulungiselelwa okungalungile.
	Okubomvu okukhanyayo	Iphutha elilungisekayo likhona.
	Okubomvu	Kwenzeke iphutha elingalungiseki. Ukuhluleka ukuzihlola kukhona (ukwehluleka kwe-checksum, noma ukwehluleka kokuhlolwa kwenqama emandleni omjikelezo). Iphutha eliyingozi le-Firmware likhona.
	Okukhanyayo okubomvu/okuluhlaza	Idivayisi ikumodi yokuzihlola.
Isimo senethiwekhi	Valiwe	Idivayisi ayikho ku-inthanethi: • Idivayisi ayikaqedi ukuhlolwa kwe-dup_MAC-id. • Idivaysi ayinawo amandla - Hlola inkomba yesimo semojuli.
	Okuluhlaza okotshani	Idivayisi iku-inthanethi kodwa ayinakho ukuxhumana esimeni esimisiwe.
	Okuhlaza	Idivayisi iku-inthanethi futhi inoxhumo esimeni esimisiwe.
	Okubomvu okukhanyayo	Ukuxhumeka okukodwa noma ngaphezulu kwe-I/O kusesimweni sokuphela kwesikhathi.
	Okubomvu	Ukwehluleka kwesixhumanisi esibalulekile - Idivayisi yokuxhumana ehlulekile. Idivayisi ithole iphutha eliyivimbela ukuthi ixhumane nenethiwekhi.
	Okukhanyayo okubomvu/okuluhlaza	Idivayisi enephutha yokuxhumana – Idivayisi ithole iphutha lokufinyelela inethiwekhi futhi isesimweni sephutha lokuxhumana. Idivayisi ithole futhi yamukela Isicelo Esinephutha Sokuxhumana Ngobunikazi - umlayezo wephrothokholi omude.

Inkomba	Isimo	Incazelo
Isimo sesiteshi	Valiwe	Imojuli ikumodi ye-CAL.
	Okuluhlaza okuqinile	Ukusebenza okuvamile kukhona nokokufaka kokuskena kwesiteshi.
	Okuluhlaza okotshani	Isiteshi siyalinganiswa.
	Okubomvu okuqinile	Iphutha elikhulu lesiteshi likhona.
	Okubomvu okukhanyayo	Isiteshi sisekupheleni kwebanga (0 mA noma 21 mA) ku-1734-IE2C, 1734-IE2CK. Isiteshi sisekupheleni kwebanga (ngaphezulu noma ngaphansi) kwe-1734-IE2V, 1734-IE2VK.

Imininingwane

Imininingwane Yokufaka

Isibaluli	1734-IE2C, 1734-IE2CK	1734-IE2V, 1734-IE2VK
Inombolo yokokufaka	2 okukodwa, okungahlukanisiwe, okwamanje	2 okukodwa, okungahlukanisiwe, voltage
Isixazululo	16 bits – phezu 0…21 mA 0.32 µA/cnt	15 bits plus uphawu 320 µA/cnt kumodi ye-unipolar noma ye-bipolar
Okokufaka kwamanje	4…20 mA 0…20 mA	-
Okokufaka ivoltage	-	0…10V umsebenzisi uyalungiseka (-0.0V ngaphansi, +0.5V ngaphezulu) ±10V umsebenzisi angalungiseka (-0.5V ngaphansi, +0.5V ngaphezulu)
Ukunemba okuphelele(1)	0.1% Isikali Esigcwele @ 25 °C (77 °F)
Ukunemba kokushayela ngezinga lokushisa	30 ppm/°C	5 ppm/°C
Izinga lokubuyekeza okokufaka (imojuli ngayinye)	120 ms @ Notch = 50 Hz 100 ms @ Notch = 60 Hz (okuzenzakalelayo) 24 ms @ Notch = 250 Hz 12 ms @ Notch = 500 Hz
Impendulo yesinyathelo sokufaka (ngesiteshi ngasinye)	80 ms @ Notch = 50 Hz 70 ms @ Notch = 60 Hz (okuzenzakalelayo) 16 ms @ Notch = 250 Hz 8 ms @ Notch = 500 Hz
Isikhathi sokuhlunga sedijithali singaguquki	0…10,000 ms (okuzenzakalelayo = 0 ms)
I-impedance yokokufaka	60 Ω	100 k XNUMX
Ukumelana nokokufaka	60 Ω	200 k XNUMX
Uhlobo lokuguqulwa	Delta Sigma
Isilinganiso sokwenqatshwa kwemodi ejwayelekile	120db
Isilinganiso sokwenqatshwa kwemodi evamile	-60 dB
Isihlungi se-notch	-3 dB ihlelwa ngokulandelayo: 13.1 Hz @ Notch = 50 Hz 15.7 Hz @ Notch = 60 Hz 65.5 Hz @ Notch = 250 Hz 131 Hz @ Notch = 580 Hz
Ifomethi yedatha	Inombolo ephelele esayiniwe
Ubukhulu bokulayisha ngokweqile	Iphutha livikelwe ku-28.8V DC
Ukulinganisa	Imboni ilinganisiwe

1. Kufaka phakathi amatemu we-offset, inzuzo, ukungalandeli umugqa, kanye nephutha lokuphindaphinda.

Imininingwane Ejwayelekile

Isibaluli	1734-IE2C, 1734-IE2CK	1734-IE2V, 1734-IE2VK
Isisekelo setheminali	1734-TB, 1734-TBS, 1734-TOP, noma 1734-TOPS
I-torque yesikulufu sesisekelo setheminali	0.6 N•m (7 lb•in)
Izinkomba, uhlangothi olunengqondo	1 okuluhlaza/obomvu – isimo semojuli 1 okuluhlaza/obomvu – isimo senethiwekhi 2 okuluhlaza/obomvu – isimo sokufakwayo
Isikhundla sokushintsha ukhiye	3
I-POINTBus™ yamanje, ubuningi	75 mA @ 5V DC
Ukuchithwa kwamandla, ubuningi	0.6 W @ 28.8V DC	0.75 W @ 28.8V DC

Isibaluli	1734-IE2C, 1734-IE2CK	1734-IE2V, 1734-IE2VK
Ukuchithwa kwe-thermal, max	2.0 BTU/ihora @ 28.8V DC	2.5 BTU/ihora @ 28.8V DC
Ukuzihlukanisa voltage	50V okuqhubekayo Akukho ukuhlukaniswa phakathi kwamashaneli angawodwana Kuhlolelwe ukumelana no-2550V DC amasekhondi angu-60	50V okuqhubekayo Akukho ukuhlukaniswa phakathi kwamashaneli angawodwana Kuhlolelwe ukumelana no-2200V DC amasekhondi angu-60
Amandla e-DC angaphandle
		24V DC
Ukunikezwa kwevoltage, nom	24V DC
Voltagibanga	10…28.8V DC	10…28.8V DC
Faka okwamanje	10 mA @ 24V DC	15 mA @ 24V DC
Ubukhulu (HxWxD), cishe.	56 x 12 x 75.5 mm (2.21 x 0.47 x 2.97 in.)
Isisindo, cishe.	33 g (1.16 oz.)
Isigaba sezintambo(1) (2)	1 - kumachweba wesignali
Usayizi wentambo	0.25…2.5 mm2 (22…14 AWG) intambo yethusi eqinile noma eboshiwe ilinganiselwe ku-75 °C (167 °F) noma ngaphezulu kuka-1.2 mm (3/64 in.) ubuningi bokufaka
Isilinganiso sohlobo lwesivalo	Lutho (isitayela esivulekile)
Ikhodi yethempeli yaseNyakatho Melika	T5	I-T4A
Ikhodi yezinga lokushisa yase-UKEX/ATEX	T4
Ikhodi yokushisa ye-IECEx	T4

1. Sebenzisa lolu lwazi lwesigaba somqhubi ukuhlela umzila kakhondatha njengoba kuchazwe ku-Industrial Automation Wiring and Grounding Guidelines, ekushicilelweni 1770-4.1.
2. Sebenzisa lolu lwazi Lwesigaba Somqhubi ukuhlela umzila kakhondatha njengoba kuchazwe Kumanuwali Yokufaka Izinga Lesistimu efanele.

Imininingwane Yemvelo

Isibaluli	Inani
Izinga lokushisa, ukusebenza	I-IEC 60068-2-1 (Isikhangiso Sokuhlola, I-Operating Cold), I-IEC 60068-2-2 (I-Bd yokuhlola, Ukushisa Okusebenzayo Okusebenzayo), I-IEC 60068-2-14 (Test Nb, Operating Thermal Shock): -20 °C ≤ Ta ≤ +55 °C (-4 °F ≤ Ta ≤ +131 °F)
Izinga lokushisa, umoya ozungezile, ubuningi	55 °C (131 °F)
Izinga lokushisa, ukungasebenzi	I-IEC 60068-2-1 (I-Test Ab, Okubandayo Okungapakishwanga Okungapakishwanga), I-IEC 60068-2-2 (I-Bb yokuhlola, Ukushisa Okungapakishwanga Okungapakishwanga Okumile), I-IEC 60068-2-14 (Inombolo Yokuhlola, Ukushaqeka Okushisayo Okungapakishwanga Okungapakishwanga): -40…+85 °C (-40…+185 °F)
Umswakama ohlobene	I-IEC 60068-2-30 (Test Db, Unpackaged Damp Ukushisa): 5…95% ukunganciphisi
Ukudlidliza	I-IEC60068-2-6 (Hlola i-Fc, Iyasebenza): 5 g @ 10…500 Hz
Ukushaqeka, ukusebenza	EC 60068-2-27 (Test Ea, Ukwethuka Okungapakishwanga): 30 g
Ukushaqeka, akusebenzi	EC 60068-2-27 (Test Ea, Ukwethuka Okungapakishwanga): 50 g
Ukukhishwa kwekhabhoni	I-IEC 61000-6-4
Ukuzivikela kwe-ESD	I-IEC6100-4-2: I-6 kV ethintwayo ikhipha ukukhishwa komoya okungu-8 kV
I-radiated RF immunity	I-IEC 61000-4-3: 10V/m nge-1 kHz sine-wave 80% AM kusukela ku-80…6000 MHz
Ukuzivikela kwe-EFT/B	I-IEC 61000-4-4: ±3 kV ku-5 kHz ezimbobeni zesignali
Ukuqinisa ukungatheleleki kwesikhashana	I-IEC 61000-4-5: ±2 kV line-earth (CM) kumachweba avikelekile
Kwenziwa ukungavikeleki kwe-RF	I-IEC61000-4-6: I-10V rms ne-1 kHz sine-wave 80% AM kusukela ku-150 kHz…80 MHz

Izitifiketi

Isitifiketi (uma umkhiqizo umakiwe)(1)	Inani
c-UL-us	I-UL Listed Industrial Control Equipment, egunyazwe i-US ne-Canada. Bona i-UL File E65584. I-UL Ifakwe ohlwini Lwekilasi I, Isigaba 2 Iqembu A,B,C,D Izindawo Eziyingozi, eligunyazwe i-US ne-Canada. Bona i-UL File E194810.
I-UK kanye ne-CE	I-UK Statutory Instrument 2016 No. 1091 kanye ne-European Union 2014/30/EU EMC Directive, ithobelana ne: EN 61326-1; Isilinganiso/Ukulawula/Ukusetshenziswa kwaselabhorethri, izidingo zezimboni I-EN 61000-6-2; I-Industrial Immunity EN 61000-6-4; Ukukhishwa Kwezimboni I-EN 61131-2; Izilawuli Ezihlelekayo (Isigaba sesi-8, Indawo A & B) I-UK Statutory Instrument 2016 No. 1101 kanye ne-European Union 2014/35/EU LVD, ithobelana ne: EN 61131-2; Izilawuli Ezihlelekayo (Isigaba 11) I-UK Statutory Instrument 2012 No. 3032 kanye ne-European Union 2011/65/EU RoHS, ihambisana ne: EN IEC 63000; Amadokhumenti obuchwepheshe
Ex	I-UK Statutory Instrument 2016 No. 1107 kanye ne-European Union 2014/34/EU ATEX Directive, ithobelana ne: EN IEC 60079-0; Izidingo Ezijwayelekile I-EN IEC 60079-7; I-Explosive Atmospheres, Protection “e” II 3 G Ex ec IIC T4 Gc DEMKO 04 ATEX 0330347X UL22UKEX2478X
I-RCM	I-Australian Radiocommunications Act, ithobelana ne: AS/NZS CISPR11; Ukukhishwa Kwezimboni.
IECEx	Uhlelo lwe-IECEx, oluhambisana ne I-IEC 60079-0; Izidingo Ezijwayelekile I-IEC 60079-7; I-Explosive Atmospheres, Protection “e” II 3 G Ex ec IIC T4 Gc I-IECEx UL 20.0072X
KC	Ukubhaliswa Kwabase-Korea Kwezisetshenziswa Zokusakaza Nezokuxhumana, kuthobelana ne-Athikili 58-2 yoMthetho Wamagagasi Omsakazo, Isigaba sesi-3
I-EAC	Russian Customs Union TR CU 020/2011 EMC Technical Regulation Russian Customs Union TR CU 004/2011 LV Technical Regulation
I-Morocco	Arrêté ministériel n° 6404-15 du 1 er muharram 1437 Arrêté ministériel n° 6404-15 du 29 ramadan 1436
CCC	CNCA-C23-01:2019 CCC Implementation Rule Explosion-Proof Electrical Products, ethobelana ne: GB/T 3836.1-2021 Iziqhumane—Ingxenye 1:Izisetshenziswa—Izimfuneko ezijwayelekile I-GB/T 3836.3-2021 Isimo sezulu esiqhumayo—Ingxenye 3: Ukuvikelwa kwezisetshenziswa ngokukhuphuka kokuphepha kwe-“e” CCC 2020122309111607 (APBC)
UKCA	2016 No. 1091 - Imithetho Yokuhambelana Kagesi 2016 No. 1101 - Imithetho Yezisetshenziswa Zikagesi (Ukuphepha) 2012 No. 3032 – Umkhawulo Wokusetshenziswa Kwezinto Ezithile Eziyingozi Emithethweni Yezisetshenziswa Zikagesi kanye Nezogesi

Bheka isixhumanisi Sokugunyazwa Komkhiqizo ku-rok.auto/certifications Sesimemezelo Sokuvumelana, Izitifiketi, neminye imininingwane yesitifiketi.

Izinsiza Ezengeziwe

Ukuze uthole ulwazi olwengeziwe ngemikhiqizo echazwe kulokhu kushicilelwa, sebenzisa lezi zinsiza. Ungakwazi view noma dawuniloda izincwadi ku-rok.auto/literature.

Insiza	Incazelo
I-POINT I/O Umhlahlandlela Wokukhetha Amamojula, ukushicilelwa kwe-1734-SG001	Ihlinzeka ngama-adaptha e-POINT I/O kanye nokucaciswa kwemojuli.
I-POINT I/O Digital kanye ne-Analog Modules kanye ne-POINTBlock I/O Imanuwali yomsebenzisi, ukushicilelwa 1734-UM001	Inikeza incazelo eningiliziwe yokusebenza kwemojula, ukumisa, nokusetshenziswa kwamamojula e-POINT I/O edijithali nawe-analog kanye namamojula we-POINTBlock I/O.
I-Industrial Automation Wiring and Grounding Guidelines, ukushicilelwa 1770-4.1	Inikeza imihlahlandlela ejwayelekile yokufaka isistimu yezimboni ye-Rockwell Automation.
Izitifiketi Zomkhiqizo website, rok.auto/certifications	Inikeza izimemezelo zokuvumelana, izitifiketi, neminye imininingwane yesitifiketi.

Ukusekelwa kwe-Rockwell Automation

Sebenzisa lezi zinsiza ukuze ufinyelele ulwazi losekelo.

Isikhungo Sokusekelwa Kwezobuchwepheshe	Thola usizo mayelana nokuthi kwenziwa kanjani amavidiyo, imibuzo evame ukubuzwa, ingxoxo, izinkundla zabasebenzisi, isisekelo solwazi, nezibuyekezo zezaziso zomkhiqizo.	rok.auto/support
Izinombolo Zefoni Zokusekela Ubuchwepheshe Bendawo	Thola inombolo yocingo yezwe lakini.	rok.auto/phonesupport
Isikhungo Semibhalo Yezobuchwepheshe	Ngokushesha finyelela futhi ulande ukucaciswa kobuchwepheshe, imiyalelo yokufaka, namamanuwali omsebenzisi.	rok.auto/techdocs
I-Literature Library	Thola imiyalelo yokufaka, imanyuwali, izincwajana, kanye nokushicilelwe kwedatha yobuchwepheshe.	rok.auto/literature
Isikhungo Sokuhambisana Nomkhiqizo Nokulanda (PCDC)	Landa i-firmware, ehlobene files (njenge-AOP, EDS, ne-DTM), futhi finyelela amanothi okukhishwa komkhiqizo.	rok.auto/pcdc

Imibhalo Impendulo
Amazwana akho asisiza ukuthi sinikeze izidingo zamadokhumenti akho kangcono. Uma uneziphakamiso zokuthi ungakuthuthukisa kanjani okuqukethwe kwethu, gcwalisa ifomu kokuthi rok.auto/docfeedback.

Izisetshenziswa zikagesi nezikagesi ezimoshayo (WEEE)

• Ekupheleni kwempilo, lezi zinsiza kufanele ziqoqwe ngokuhlukana nanoma yimuphi udoti kamasipala ongahlungiwe.
• I-Rockwell Automation igcina imininingwane yamanje yokuthobela imvelo yomkhiqizo kuyo webindawo ku rok.auto/pec.
• Xhumana nathi. rockwellautomation.com ukwandisa amathuba omuntu®
• I-AMERICAS: I-Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Ucingo: (1) 414.382.2000, Ifeksi: (1) 414.382.4444
• I-EUROPE/PHAKATHI EMPUMALANGA/AFRICA: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Ucingo: (32) 2663 0600, Ifeksi: (32)2 663 0640
• ASIA PACIFIC: Rockwell Automation SEA Pte Ltd, 2 Corporation Road, #04-05, Main Lobby, Corporation Place, Singapore 618494, Ucingo: (65) 6510 6608, FAX: (65) 6510 6699
• E-UNITED KINGDOM: Rockwell Automation Ltd., Pitfield, Kiln Farm, Milton Keynes, MK11 3DR, United Kingdom, Ucingo: (44)(1908) 838-800, Ifeksi: (44)(1908) 261-917
• U-Allen-Bradley, ukwanda okungenzeka kwabantu, i-Factory Talk, i-POINT 1/0, i-POINTBus, i-Rockwell Automation, i-Studio 5000 Logix Designer, kanye ne-TechConnect izimpawu zokuthengisa ze-Rockwell Automation, Inc.
• I-ControlNet, DeviceNet, ne-EtherNet/IP izimpawu zokuthengisa ze-ODVA, Inc.
• Izimpawu zokuthengisa okungezona eze-Rockwell Automation ziyimpahla yezinkampani zazo.
• Ukushicilelwa 1734-IN027E-EN-E - Juni 2023 | I-Supersedes Publication 1734-IN027D-EN-E - Disemba 2018
• Copyright © 2023 Rockwell Automation, Inc. Wonke amalungelo agodliwe.

Amadokhumenti / Izinsiza

U-Allen-Bradley 1734-IE2C POINT IO 2 Yamanje kanye ne-2 Voltage Amamojula we-Analog wokufaka [pdf] Incwadi Yeziqondiso 1734-IE2C POINT IO 2 Yamanje kanye no-2 VoltagI-e Input Analog Modules, 1734-IE2C, POINT IO 2 Current and 2 Voltage Amamojula we-Analog, Amanje kanye no-2 Voltage Amamojula we-Analog, amamojula we-Analog, amamojula we-Analog, amamojula

Izithenjwa

• Imaniwali yosebenzisayo