MICROCHIP v2.3 Gen 2 Selaoli sa Sesebelisoa
Selelekela
IP ena ea CoreRxIODBitAlign generic training e sebelisoa ho IO gearing block tseleng ea Rx bakeng sa Bit Alignment e ikemetseng ho data kapa protocol e sebelisoang. CoreRxIODBitAlign e u lumella ho lokisa tieho ea tsela ea data e amanang le tsela ea oache.
Kakaretso ea CoreRxIODBitAlign
| Ea mantlha Phetolelo | Tokomane ena e sebetsa ho CoreRxIODBitAlign v2.3 |
| Sesebelisoa se Tšehetsoeng | CoreRxIODBitAlign e tšehetsa malapa a latelang: |
| Malapa | • PolarFire® SoC |
| • PolarFire | |
| Hlokomela: Ho fumana lintlha tse ling, etela ho leqephe la sehlahisoa | |
| Ts'ehetsoeng Phallo ea Sesebelisoa | E hloka Libero® SoC v12.0 kapa ho lokolloa hamorao |
| Li-interfaces tse tšehelitsoeng | — |
| Ho fana ka laesense | CoreRxIODBitAlign ha e hloke laesense |
| Litaelo tsa ho Hloma | CoreRxIODBitAlign e tlameha ho kenngoa ho IP Catalogue ea Libero SoC software ka bo eona, ka ts'ebetso ea ntlafatso ea IP Catalog ho software ea Libero SoC, kapa e khoasolloa ka letsoho ho tsoa lethathamong. Hang ha motheo oa IP o kentsoe ho Libero SoC software IP Catalog, e lokisoa, e hlahisoa, 'me e kenngoa ka har'a SmartDesign bakeng sa ho kenngoa morerong oa Libero. |
| Tšebeliso ea lisebelisoa le
Tshebetso |
Kakaretso ea tlhaiso-leseling ea ts'ebeliso le ts'ebetso ea CoreRxIODBitAlign e thathamisitsoe ho 8. Tšebeliso ea Sesebelisoa le Persebopeho |
CoreRxIODBitAlign Change Log Information
Karolo ena e fana ka tlhaloso e qaqilengview ea likarolo tse sa tsoa kenyelletsoa, ho qala ka tokollo ea morao-rao. Ho fumana lintlha tse ling mabapi le mathata a rarollotsoeng, sheba karolo ea 7. Mathata a Rarollotsoeng.
| CoreRxIODBitAlign v2.3 | Ke eng E ncha • E ntlafalitsoe bakeng sa mokhoa oa koetliso o thehiloeng ho MIPI |
| CoreRxIODBitAlign v2.2 | Tse ncha ke life • Ekelitsoe ka ho Le letšehali le ka ho le letona EYE Tap e liehisa lintlha mojulung oa holimo |
Likaroloana
CoreRxIODBitAlign e na le likarolo tse latelang:
- E ts'ehetsa ho tsamaisana ha Bit ka bophara bo fapaneng ba Mahlo 1–7
- E ts'ehetsa mekhoa e fapaneng ea Lesela la Double Data Rate (DDR) 2/4/3p5/5
- E tšehetsa Skip le Restart/Shold mochine
- E ts'ehetsa koetliso ea Mobile Industry processor Interface (MIPI) ka LP e bonts'ang Start of Frame
- E tšehetsa 256 Tap Lieheho bakeng sa Bit Alignment
Tlhaloso ea Ts'ebetso
CoreRxIODBitMahanya le Rx IOD Interface
Setšoantšo se latelang se bontša setšoantšo sa block block se phahameng sa CoreRxIODBitAlign.
- Tlhaloso e bua ka CoreRxIODBitAlign e tšehetsang lisebelisoa tsa PolarFire® le PolarFire SoC.
- CoreRxIODBitAlign e etsa koetliso 'me e boetse e ikarabella bakeng sa ho kopanya lisebelisoa tsa IO Digital (IOD) le IO Gearing (IOG) ho tšehetsa e le mohloli o matla o nang le tieho ea ho lokisa ho tšoara data ka nepo.
- Mokhoa o felletseng oa ho phalla o hlalositsoe karolong ea 5. Lits'oants'o tsa nako.
- CoreRxIODBitAlign e ts'ehetsa ka matla ho eketsa kapa ho tlosa tieho ho tsoa tseleng ea data e amanang le tsela ea oache. Mona RX_DDRX_DYN Interface e fana ka litaolo ho CoreRxIODBitAlign ho etsa koetliso ea clock-to-data margin ka ho eketsa tieho ho ea holimo. CoreRxIODBitAlign, le eona bakeng sa review (ea keketseho e 'ngoe le e 'ngoe ea ho lieha ho theipi), boloka lifolakha tsa boemo ba maikutlo ho tsoa ho RX_DDRX_DYN Interface.
- CoreRxIODBitAlign e tsoela pele ka koetliso bakeng sa keketseho e 'ngoe le e' ngoe ea pompo ho fihlela RX_DDRX_DYN Interface e fihla boemong bo sa tloaelehang.
- Qetellong, CoreRxIODBitAlign e fiela lifolakha tse felletseng tsa boemo ba maikutlo. Mohato ona o ntlafatsa le ho lekanya tatellano e nyane ea data hore e be likhato tse 90 tse bohareng ho tloha pheletsong ea oache.
- Litieho tsa ho qetela tse baliloeng li kentsoe ho RX_DDRX_DYN Interface ho phethela lithupelo tsa ho tsamaisa lintho.
- Likarolo tse tšehetsoeng ke CoreRxIODBitAlign li thathamisitsoe ka botlalo ka tsela e latelang.
Mokhoa o Matla oa ho Koetlisa Bocha
- CoreRxIODBitAlign e lula e beha leihlo lifolakha tsa Feedback Status (IOD_EARLY/IOD_LATE) le ho hlahloba hore na lifolakha lia fetoha.
- IP e qala ka ho lokisa lipompo tse baliloeng ka ho +/- 4 ho ea holimo kapa tlase. Leha ho le joalo, haeba lifolakha li fetoha, IP e tsosolosa koetliso hape.
Hold Mechanism (Botsa Potso)
- Ts'ebetso ena e sebelisoa ha koetliso e hloka ho ba Hold state. BIT_ALGN_HOLD e sebetsa maemong a holimo, 'me re tlameha ho tiisa hore re tla tsoela pele ka koetliso.
- HOLD_TRNG parametha e tlameha ho hlophisoa ho 1 ho setlhophiso ho lumella sesebelisoa sena. Paramethara ena e behiloe ho 0 ka ho sa feleng.
Restart Mechanism (Botsa Potso)
- Karolo ena e sebelisoa ho qala koetliso bocha. Ho qala koetliso bocha, kenyeletso ea BIT_ALGN_RSTRT e tlameha ho tiisoa bakeng sa oache e le 'ngoe ea ho otla ha Serial Clock (SCLK).
- Sena se tla qala ka mokhoa o bonolo oa ho seta botjha IP, mme e beakanya BIT_ALGN_DONE ho isa ho 0 le BIT_ALGN_START ho isa ho 1.
Skip Mechanism (Botsa Potso)
- Tšobotsi ena e sebelisoa ha koetliso e sa hlokahale, 'me koetliso e feletseng e ka fetisoa. BIT_ALGN_SKIP e sebetsa maemong a holimo, 'me re tlameha ho lumeloa hore re tlole koetliso e felletseng.
- SKIP_TRNG parametha e tlameha ho hlophisoa ho 1 ho setlhophiso ho lumella sesebelisoa sena. Paramethara ena e behiloe ho 0 ka ho sa feleng.
Mokhoa oa Koetliso o thehiloeng ho MIPI (Botsa Potso)
- MIPI_TRNG parametha e tlameha ho hlophisoa ho 1 ho setlhophiso ho nolofalletsa tšobotsi ena. Haeba e setiloe, joale boema-kepe ba LP_IN bo eketsoa ho CoreRxIODBitAlign.
- IP e lemoha moeli o oelang oa boema-kepe ba ho kenya LP_IN, e bonts'ang qalo e nepahetseng ea foreimi ho qala koetliso.
CoreRxIODBitAlign Parameters le Interface Signals
Litlhophiso tsa GUI (Botsa Potso)
Ha ho na litlhophiso tsa tlhophiso bakeng sa tokollo ena ea mantlha.
Boema-kepe (Botsa Potso)
Tafole e latelang e thathamisa matšoao a ho kenya le ho tsoa a sebelisitsoeng moralong oa CoreRxIODBitAlign.
Lethathamo la 3-1. Lipontšo tsa ho Kena le ho Tsoa
| Letshwao | Tataiso | Bophara ba kou (likotoana) | Tlhaloso |
| Lioache le Seta bocha | |||
| SEBELE | Kenyeletso | 1 | Oache ea masela |
| PLL_LOCK | Kenyeletso | 1 | Senotlolo sa PLL |
| RETS'ELISITSOE | Kenyeletso | 1 | Ho seta botjha ha asynchronous ho Active-Low |
| Data bese le Taolo | |||
| IOD_EARLY | Kenyeletso | 1 | Lethathamo la leihlo la data la pele |
| IOD_LATE | Kenyeletso | 1 | Lethathamo la leihlo la data la morao-rao |
| IOD_ OOR | Kenyeletso | 1 | Letšoao la leihlo la data le tsoileng tseleng bakeng sa mohala oa ho lieha |
| BIT_ALGN_EYE_IN | Kenyeletso | 3 | Mosebelisi o beha bophara ba leihlo la leihlo la data |
| BIT_ALGN_RTRT | Kenyeletso | 1 | Bit Align Training e qala bocha (Pulse-based assertion) 1— Koetliso ea ho Qala Botjha 0— Ha ho Koetliso ea ho Qala Botjha |
| BIT_ALGN_CLR_FLGS | Sephetho | 1 | Hlakola lifolakha tsa pele kapa tsa morao |
| BIT_ALGN_LOAD | Sephetho | 1 | Laela kamehla |
| BIT_ALGN_DIR | Sephetho | 1 | Ho lieha ha mola ho ea holimo kapa tlase 1— Holimo (keketso e le 'ngoe) |
| BIT_ALGN_MOVE | Sephetho | 1 | Eketsa tieho ho lebelo la ho sisinyeha |
| BIT_ALIGN_SKIP | Kenyeletso | 1 | Ho tlola koetliso ea Bit Align (Polelo e thehiloeng boemong)
1- Tlohela koetliso 'me e sebetse feela ha paramente ea SKIP_TRNG e behiloe ho 1 0- Koetliso e tlameha ho tsoela pele ka mokhoa o tloaelehileng |
| BIT_ALIGN_HOLD | Kenyeletso | 1 | Bit Align training hold (Polelo e thehiloeng boemong)
1— Tšoara koetliso 'me e sebetse ha feela paramente ea HOLD_TRNG e behiloe ho 1 0- Koetliso e tlameha ho tsoela pele ka mokhoa o tloaelehileng |
| BIT_ALIGN_ERR | Sephetho | 1 | Phoso ea ho tsamaisana ha nyane (Polelo e thehiloeng boemong) 1— Phoso 0— Ha ho Phoso |
| BIT_ALGN_START | Sephetho | 1 | Ho qala ha koetliso ea Bit Align (Polelo e thehiloeng boemong) 1— E qalile 0— Ha e so qaloe |
| BIT_ALGN_ETSAHALA | Sephetho | 1 | Koetliso ea Bit Align e entsoe (Level based assertion) 1— E phethetsoe 0— Ha e e-so phetheloe |
| Letshwao | Tataiso | Bophara ba kou (likotoana) | Tlhaloso |
| LP_IN | Kenyeletso | 1 | Koetliso ea foreimi e thehiloeng ho MIPI (Polelo e thehiloeng boemong)
1- Letšoao le sebetsang-Low le tlameha ho ba tlase ho bonts'a ho qala ha foreime mme le tlameha ho etsa dessert feela qetellong ea foreime. 0- Koetliso e tlameha ho tsoela pele ka mokhoa o tloaelehileng 'me letšoao lena le tlameha ho tlamelloa tlaase ka hare. |
| DEM_BIT_ALGN_TAPDLY | Sephetho | 8 | Ho balletsoe tieho ea TAP, 'me e sebetsa hang ha BIT_ALGN_DONE e behiloe holimo ke IP. |
| RX_BIT_ALIGN_LEFT_WIN | Sephetho | 8 | Left Data Eye monitor value
Hlokomela: Lipalo li sebetsa feela ha tlhahiso BIT_ALGN_DONE e behiloe ho 1 'me tlhahiso BIT_ALGN_START e behiloe ho 0. Haeba paramethara SKIP_TRNG e behiloe e khutlisetsa 0. |
| RX_BIT_ALIGN_RGHT_WIN | Sephetho | 8 | Right Data Eye monitor value
Hlokomela: Lipalo li sebetsa feela ha tlhahiso BIT_ALGN_DONE e behiloe ho 1 'me tlhahiso BIT_ALGN_START e behiloe ho 0. Haeba paramethara SKIP_TRNG e behiloe e khutlisetsa 0. |
Ho kenya ts'ebetsong CoreRxIODBitAlign ho Libero Design Suite
SmartDesign (Botsa Potso)
- CoreRxIODBitAlign e kentsoe esale pele tikolohong ea meralo ea SmartDesign IP deployment. Setšoantšo se latelang se bontša example ea instantiated CoreRxIODBitAlign.
- Ntho ea mantlha e lokisoa ho sebelisoa fensetere ea tlhophiso ho SmartDesign, joalo ka ha ho bonts'itsoe ho Figure 4-2.
- Bakeng sa tlhaiso-leseling e batsi mabapi le ho sebelisa SmartDesign ho tiisa le ho hlahisa li-cores, bona SmartDesign User Guide.
Ho lokisa CoreRxIODBitAlign ho SmartDesign (Botsa Potso)
- Motheo o lokisoa ho sebelisoa GUI ea tlhophiso ka har'a SmartDesign joalokaha ho bontšitsoe setšoantšong se latelang.
Phallo ea Ketsiso (Botsa Potso)
- Testbench ea mosebelisi bakeng sa CoreRxIODBitAlign e kenyellelitsoe likhatisong tsohle.
- Ho etsa lipapiso, etsa mohato o latelang: khetha Mosebelisi Testbench phallo ho SmartDesign, ebe o tobetsa Boloka le Hlahisa fenstereng ea Hlahisa.
- Mosebelisi oa testbench o khethoa ka GUI ea Configuration ea mantlha ea testbench. Ha SmartDesign e hlahisa morero oa Libero® SoC, e kenya testbench ea mosebedisi files.
- Ho tsamaisa testbench ea mosebelisi, beha motso oa moralo ho CoreRxIODBitAlign instantiation sebakeng sa maemo a phahameng a moralo oa Libero SoC, ebe o tobetsa Simulation fensetereng ea Libero SoC Design Flow.
- Sena se hohela ModelSim® mme e tsamaisa papiso ka bo eona.
- Setšoantšo se latelang se bontša motho oa mehlengample ea ketsiso subsystem. E sebelisa karolo ea IOG_IOD DDRX4 le DDTX4 ka mokhoa oa loopback ka CoreRxIODBitAlign bakeng sa papiso.
- Mona, lintlha tsa PRBS tse hlahisitsoeng li fetisoa ke DDTX4 serially ho DDRX4 'me qetellong, PRBS checker e sebelisetsoa ho hlahloba botšepehi ba data ka mor'a hore koetliso e phethoe.
Synthesis in Libero SoC (Botsa Potso)
- Ho tsamaisa synthesis le tlhophiso e khethiloeng ho GUI ea tlhophiso, beha motso oa moralo ka nepo. Tlas'a Moralo oa Phethahatso, ho thebo ea Phallo ea Moralo, tobetsa ka ho le letona ho Synthesize ebe o tobetsa Matha.
Sebaka le Tsela Libero SoC (Botsa Potso)
- Kamora ho beha motso oa moralo ka nepo ebe o tsamaisa Synthesis. Tlas'a Phethahatso ea Moralo ho tab ea Phallo ea Moralo, tobetsa ka ho le letona ho Sebaka le Tsela, ebe o tobetsa Matha.
Khokahano ea Sisteme (Botsa Potso)
- Karolo ena e fana ka maikutlo a ho nolofatsa kopanyo ea CoreRxIODBitAlign.
- Rx/Tx IOG e sebelisitsoeng e ts'ehetsa mekhoa e mengata ea ho kenya le ho tsoa. Lintlha tsena tsa data le lioache li kanna tsa lieha 'me maemong a mang li potlakile, ho ipapisitsoe le sebopeho sa ho qetela sa silicon.
- Lethathamo le latelang le thathamisa data le sekhahla sa oache.
Lethathamo la 4-1. Sekhahla sa data le oache
| Mokhoa oa IOG | Tataiso | Karolelano ea Gear | Tekanyo e phahameng ea IO Data E Lebeletsoe | IO Tshupanako Sekhahla | Ea mantlha Tshupanako Sekhahla | Mofuta oa data |
| DDRX4 | Kenyeletso | 8:1 | 1600 Mbps | 800 MHz | 200 MHz | DDR |
Setšoantšo se latelang se bontša motho oa mehlengample ea CoreRXIODBitAlign subsystem integration.
- Subsystem e fetileng e sebelisa karolo ea IOG_IOD DDRX4 le DDTX4 ka mokhoa oa Loopback ka CoreRxIODBitAlign bakeng sa papiso. Mona, lintlha tsa PRBS tse hlahisitsoeng li fetisoa ke IOG_IOD_DDRTX4_0, serially ho IOG_IOD_DDRX4_PF_0.
- CoreRxIODBitAlign e etsa lithupelo (BIT_ALIGN_START e behiloe ho 1, BIT_ALIGN_DONE e behiloe ho 0) ka karolo ea IOG_IOD_DDRX4_PF_0, 'me qetellong, hang ha koetliso e entsoe (BIT_ALIGN_START e behiloe ho 0, BIT_ALIGN_DONE e setiloe ho 1.
Testbench (Botsa Potso)
- Testbench e kopaneng e sebelisetsoa ho netefatsa le ho leka CoreRxIODBitAlign e bitsoang user testbench.
Testbench ea mosebelisi (Botsa Potso)
- Testbench ea mosebelisi e kenyellelitsoe le likhatiso tsa CoreRxIODBitAlign tse netefatsang likarolo tse 'maloa tsa CoreRxIODBitAlign. Setšoantšo se latelang se bontša CoreRxIODBitAlign user testbench.
- Joalokaha ho bontšitsoe setšoantšong se fetileng, testbench ea mosebedisi e na le Microchip DirectCore CoreRxIODBitAlign DUT, PRBS_GEN, PRBS_CHK, CCC, IOG_IOD_TX, le IOG_IOD_RX ho netefatsa ka mokhoa oa Loopback.
- The Clock Conditioning Circuit (CCC) e khanna CORE_CLK le IO_CLK ha oache e tsitsitse.
- PRBS_GEN e tsamaisa data e bapileng ho IOG_IOD_TX, ebe IOG_ID_RX e amohela data ea serial ka ho ts'oana.
- CoreRxIODBitAlign DUT e etsa koetliso ka matšoao a IOD_CTRL. Hang ha koetliso e phethiloe, thibelo ea PRBS_CHK e lumelloa ho hlahloba lintlha tse tsoang ho IOG_IOD_RX thibela bakeng sa botšepehi ba data.
Bohlokoa: Testbench ea mosebedisi e tšehetsa feela tlhophiso e tsitsitseng.
Litšoantšo tsa Nako
- Karolo ena e hlalosa setšoantšo sa nako ea CoreRxIODBitAlign.
Setšoantšo sa Nako sa Koetliso sa CoreRxIODBitAlign (Botsa Potso)
- Setšoantšo se latelang sa nako ke example ea tatellano ea koetliso e nang le liparamente tse latelang.
- CoreRxIODBitAlign e sebetsa ho ipapisitse le oache ea Lesela kapa SCLK, kapa OUT2_FABCLK_* ho tsoa ho karolo ea CCC kapa ea PLL, le karolo ea PF_IOD_GENERIC_RX IOD e sebelisitsoeng ho latela OUT*_HS_IO_CLK_* kapa oache ea Banka kapa BCLK bakeng sa ho tsamaisana le hanyane. Mona, karolo ea PF_IOD_GENERIC_RX IOD e fumana lintlha tsa serial bakeng sa ho tsamaisana le hanyane. Bakeng sa mohlalaample, haeba data e hlokahalang ke 1000 Mbps ho DDRx4 Fabric mode, joale OUT2_FABCLK_0 kapa SCLK e tlameha ho tlosoa PLL kapa karolo ea CCC e le 125 MHz le OUT0_HS_IO_CLK_0 kapa BCLK ho PF_IOD_GENERIC_RX e tlameha ho ba 500 MHz.
- CoreRxIODBitAlign e qala koetliso hang ha PLL_LOCK e tsitsitse ebile e le holimo. Ebe u qala koetliso ka ho khanna BIT_ALGN_START holimo le BIT_ALGN_DONE tlase, ebe u khanna tlhahiso BIT_ALGN_LOAD ho kenya litlhophiso tsa kamehla ho karolo ea PF_IOD_GENERIC_RX. BIT_ALGN_CLR_FLGS e sebelisoa ho hlakola lifolakha tsa IOD_EARLY, IOD_LATE, le BIT_ALGN_OOR.
- CoreRxIODBitAlign e tsoela pele ka BIT_ALGN_MOVE e lateloe ke BIT_ALGN_CLR_FLGS bakeng sa TAP e 'ngoe le e 'ngoe 'me e tlaleha lifolakha tsa IOD_EARLY le IOD_LATE. Hang ha BIT_ALGN_OOR e se e behiloe holimo ke karolo ea PF_IOD_GENERIC_RX, CoreRxIODBitAlign e fiela lifolakha tse rekotiloeng TSA PELE LE LATE 'me e fumana lifolakha tse nepahetseng tsa Pele le tsa Morao ho bala tieho e hlokahalang ea TAP bakeng sa ho tsamaisana le oache le data.
- CoreRxIODBitAlign e laela tieho e baliloeng ea TAP 'me e khanna BIT_ALGN_START tlase le BIT_ALGN_DONE holimo ho bontša hore koetliso e felile.
- CoreRxIODBitAlign e ntse e tsoela pele ho ikoetlisa ka matla haeba e lemoha maikutlo a lerata a IOD_EARLY kapa IOD_LATE a tsoang karolong ea PF_IOD_GENERIC_RX. Mona, BIT_ALGN_DONE e setiloe bocha 'me e tsamaisitsoe ka tlase,' me BIT_ALGN_START e huleloa holimo hape ke CoreRxIODBitAlign ho bontša hore koetliso e qala hape. Theko ea nako ha e fihla boemong ba nako, e tiisa BIT_ALGN_ERR qetellong ea thupelo.
- CoreRxIODBitAlign e boetse e fana ka mokhoa oa ho qala bocha bakeng sa mosebelisi oa ho qetela ho qala koetliso hape neng kapa neng ha ho hlokahala. BIT_ALGN_RTRTT ke "active-high pulse" e tlameha ho ba holimo, mohlalaample, lioache tse robeli.
- Mona BIT_ALGN_DONE e setiloe bocha 'me e tsamaisitsoe ka tlase,' me BIT_ALGN_START e tsamaisoa hodimo hape ke CoreRxIODBitAlign, ho bontsha qalo e ntjha ya thupelo.
- CoreRxIODBitAlign e boetse e fana ka mokhoa oa ho tšoara ho tšoara koetliso bohareng. Mona parameter ea HOLD_TRNG e tlameha ho hlophisoa ho 1, ebe CoreRxIODBitAlign e sebelisa tlhahiso ea BIT_ALGN_HOLD 'me e tlameha ho fana ka maikutlo a sebetsang-holimo ho fihlela e hloka CoreRxIODBitAlign ho tšoara koetliso ebe e tsoela pele ka koetliso hang ha tlhahiso BIT_ALGN_HOLD e theohile tlaase.
Litšupiso tse ling
- Karolo ena e fana ka lethathamo la lintlha tse ling.
- Bakeng sa liapdeite le lintlha tse ling mabapi le software, lisebelisoa, le hardware, etela maqephe a Thepa ea Bohlale ho Microchip FPGA Intellectual Property Cores.
Mathata a Tsejoang le Litharollo (Botsa Potso)
- Ha ho na meeli e tsejoang kapa li-workaround ho CoreRxIODBitAlign v2.3.
Likarolo le Lisebelisoa tse Khaotsoeng (Botsa Potso)
- Ha ho na likarolo le lisebelisoa tse khaotsoeng ho CoreRxIODBitAlign v2.3.
Mathata a Rarollotsoeng
- Tafole e latelang e thathamisa lintlha tsohle tse rarollotsoeng bakeng sa litokollo tse fapaneng tsa CoreRxIODbitAlign.
Lethathamo la 7-1. Mathata a Rarollotsoeng
| Lokolla | Tlhaloso |
| 2.3 | Ha ho na mathata a rarollotsoeng tokollong ena ea v2.3 |
| 2.2 | Ha ho na mathata a rarollotsoeng tokollong ena ea v2.2 |
| 1.0 | Phatlalatso ea Pele |
Tšebeliso le Ts'ebetso ea Sesebelisoa
CoreRxIODBitAlign macro e kengoa ts'ebetsong malapeng a thathamisitsoeng tafoleng e latelang.
Lethathamo la 8-1. Tšebeliso le Ts'ebetso ea Sesebelisoa
| Sesebelisoa Lintlha | FPGA Lisebelisoa | Tshebetso (MHz) | |||
| Lelapa | Sesebelisoa | DFF | LUTs | Maikutlo Lintlha | SEBELE |
| PolarFire® | MPF300TS | 788 | 1004 | 1432 | 261 |
| PolarFire SoC | MPF250TS | 788 | 1004 | 1416 | 240 |
- Bohlokoa: The Lintlha tse tafoleng e fetileng li finyelloa ho sebelisoa Libero® SoC v2023.2.
- Lintlha tse tafoleng e fetileng li finyelloa ho sebelisoa litlhophiso tse tloaelehileng tsa synthesis le sebopeho.
- Mekhahlelo e latelang ea boemo bo holimo ea GUI e fetotsoe ho tloha ho boleng ba eona ba kamehla.
- Lintlha tse latelang ke tsa kamehla:
- SKIP_TRNG = 1
- HOD_TRNG = 1
- MIPI_TRNG = 1
- DEM_TAP_WAIT_CNT_WIDTH = 3
- Lintlha tse latelang ke lithibelo tsa oache tse sebelisoang ho fihlela linomoro tsa ts'ebetso:
- LEKHOTLA = 200 MHz
- Lebelo la Potlako = −1
- Phallo e baloa ka tsela e latelang: (Bophara ba Bit/Palo ea lipotoloho) × Sekhahla sa Oache (Ts'ebetso).
Nalane ea Phetoho
Nalane ea ntlafatso e hlalosa liphetoho tse kentsoeng tšebetsong tokomaneng. Liphetoho li thathamisitsoe ka ntlafatso, ho qala ka khatiso ea morao-rao.
Lethathamo la 9-1. Nalane ea Phetoho
| Khatiso | Letsatsi | Tlhaloso |
| B | 02/2024 | Lenane le latelang ke lethathamo la liphetoho tokollong ea B ea tokomane:
• E ntlafalitsoe bakeng sa CoreRxIODBitAlign v2.3 • E kenyelelitsoe Fetoha lintlha tsa log karolong ea Selelekela • E ntlafalitsoe 8. Karolo ea Tšebeliso le Ts'ebetso ea Sesebelisoa • E ekelitsoe 7. Karolo ea Mathata a Rarollotsoeng |
| A | 03/2022 | Lenane le latelang ke lethathamo la liphetoho tokollong ea A ea tokomane:
• Tokomane e fetiselitsoe ho thempleite ea Microchip • Nomoro ea tokomane e fetotsoe ho tloha ho 50200861 ho ea DS50003255 |
| 3 | — | Lethathamo le latelang ke lethathamo la liphetoho tokollong ea 3 ea tokomane:
• E ntlafalitsoe bakeng sa CoreRxIODBitAlign v2.2. • E ntlafalitse bukana ea mosebelisi bakeng sa matšoao a mahlo a data a leqele le le letona holimo. Bakeng sa lintlha tse ling, sheba setšoantšo sa 2-1 le 3.2. Maemakepe. |
| 2 | — | Lethathamo le latelang ke lethathamo la liphetoho tokollong ea 2 ea tokomane:
• E ntlafalitsoe bakeng sa CoreRxIODBitAlign v2.1. • Nchafatsoa: 2. Tlhaloso ea Ts'ebetso le 5. Litšoantšo tsa Nako. |
| 1 | — | Revision 1.0 e bile khatiso ea pele ea tokomane ena. E etselitsoe CoreRxIODBitAlign v2.0. |
Tšehetso ea Microchip FPGA
- Sehlopha sa lihlahisoa tsa Microchip FPGA se tšehetsa lihlahisoa tsa sona ka lits'ebeletso tse fapaneng tsa tšehetso, ho kenyeletsoa Ts'ebeletso ea Bareki, Setsi sa Ts'ehetso ea Tekheniki ea Bareki, a websebaka, le liofisi tsa thekiso lefatšeng ka bophara.
- Bareki ba khothaletsoa ho etela lisebelisoa tsa Marang-rang tsa Microchip pele ba ikopanya le tšehetso kaha ho ka etsahala hore ebe lipotso tsa bona li se li arajoa.
- Ikopanye le Setsi sa Tšehetso ea Setsebi ka ho website at www.microchip.com/support. Bolela ka
- Nomoro ea Karolo ea Sesebelisoa sa FPGA, khetha mofuta o nepahetseng oa linyeoe, 'me u hlophise moralo files ha u ntse u theha nyeoe ea tšehetso ea tekheniki.
- Ikopanye le Tshebeletso ya Bareki bakeng sa tshehetso ya dihlahiswa tseo e seng tsa botekgeniki, jwalo ka ditheko tsa sehlahiswa, dintlafatso tsa sehlahiswa, tlhahisoleseding e ntjhafatsa, boemo ba odara, le tumello.
- Ho tsoa Amerika Leboea, letsetsa 8002621060
- Ho tsoa lefats'eng lohle, letsetsa 6503184460
- Fax, ho tsoa kae kapa kae lefatšeng, 6503188044
Boitsebiso ba Microchip
Microchip Websebaka
- Microchip e fana ka tšehetso ea inthaneteng ka rona website at www.microchip.com/. Sena websebaka se sebedisoang ho etsa files le tlhahisoleseding e fumaneha habonolo ho bareki. Tse ling tsa litaba tse fumanehang li kenyelletsa:
- Tšehetso ea Sehlahisoa - Li-datasheets le liphoso, lintlha tsa ts'ebeliso le lintlhaample mananeo, lisebelisoa tsa moralo, litataiso tsa basebelisi le litokomane tsa tšehetso ea hardware, lintlafatso tsa morao-rao tsa software le li-archived software
- Tšehetso e Akaretsang ea Theknoloji - Lipotso tse atisang ho botsoa (FAQs), likopo tsa tšehetso ea tekheniki, lihlopha tsa lipuisano tsa inthaneteng, lethathamo la litho tsa lenaneo la balekane ba Microchip
- Khoebo ea Microchip - Litaelo tsa khetho ea lihlahisoa le ho odara, likhatiso tsa morao-rao tsa Microchip, lethathamo la lithupelo le liketsahalo, lethathamo la liofisi tsa thekiso ea Microchip, barekisi le baemeli ba feme.
Ts'ebeletso ea Tsebiso ea Phetoho ea Sehlahisoa
- Ts'ebeletso ea tsebiso ea phetoho ea sehlahisoa sa Microchip e thusa ho boloka bareki ba le teng ka lihlahisoa tsa Microchip.
- Ba ngolisitseng ba tla fumana litemoso tsa lengolo-tsoibila neng kapa neng ha ho na le liphetoho, lintlafatso, lintlafatso, kapa liphoso tse amanang le sehlahisoa se itseng sa lelapa kapa sesebelisoa sa ntlafatso sa thahasello.
- Ho ngodisa, eya ho www.microchip.com/pcn mme o latele ditaelo tsa ngodiso.
Tšehetso ea Bareki
- Basebelisi ba lihlahisoa tsa Microchip ba ka fumana thuso ka likanale tse 'maloa:
- Morekisi kapa Moemedi
- Ofisi ea Thekiso ea Lehae
- Embedded Solutions Engineer (ESE)
- Tšehetso ea tekheniki
- Bareki ba lokela ho ikopanya le mofani oa bona oa thepa, moemeli, kapa ESE bakeng sa tšehetso. Liofisi tsa thekiso ea lehae le tsona li teng ho thusa bareki. Lethathamo la liofisi tsa thekiso le libaka le kenyelelitsoe tokomaneng ena.
- Tšehetso ea tekheniki e fumaneha ka ho websebaka ho: www.microchip.com/support
Karolo ea Tšireletso ea Khoutu ea Lisebelisoa tsa Microchip
- Hlokomela lintlha tse latelang tsa ts'ireletso ea khoutu lihlahisoa tsa Microchip.
- Lihlahisoa tsa Microchip li kopana le litlhaloso tse fumanehang ho Microchip Data Sheet ea bona.
- Microchip e lumela hore lihlahisoa tsa eona li sireletsehile ha li sebelisoa ka mokhoa o reriloeng, ka har'a litlhaloso tsa ts'ebetso, le tlas'a maemo a tloaelehileng.
- E boloka boleng ba Microchip mme ka mabifi e sireletsa litokelo tsa eona tsa thepa ea mahlale. Boiteko ba ho tlola likarolo tsa ts'ireletso ea khoutu ea lihlahisoa tsa Microchip bo thibetsoe ka thata mme bo ka tlola Digital Millennium Copyright Act.
- Ha ho Microchip kapa moetsi ofe kapa ofe oa semiconductor ea ka netefatsang ts'ireletso ea khoutu ea eona. Tšireletso ea khoutu ha e bolele hore re tiisa hore sehlahisoa "se ke ke sa robeha".
- Tšireletso ea khoutu e lula e fetoha. Microchip e ikemiselitse ho tsoela pele ho ntlafatsa likarolo tsa ts'ireletso ea khoutu ea lihlahisoa tsa rona.
Tsebiso ea Molao
- Khatiso ena le lintlha tse mona li ka sebelisoa feela le lihlahisoa tsa Microchip, ho kenyeletsoa ho rala, ho leka, le ho kopanya lihlahisoa tsa Microchip le kopo ea hau. Tšebeliso ea tlhahisoleseling ena ka tsela efe kapa efe e tlola melaoana ena. Lintlha mabapi le lits'ebetso tsa sesebelisoa li fanoe molemong oa hau feela 'me li ka nkeloa sebaka ke liapdeite. Ke boikarabello ba hau ho netefatsa hore kopo ea hau e fihlela litlhoko tsa hau. Ikopanye le ofisi ea thekiso ea Microchip ea lehae bakeng sa tšehetso e eketsehileng kapa, fumana tšehetso e eketsehileng ho www.microchip.com/en-us/support/design-help/client-support-services.
- TSEBISO ENA E FUMANA KE MICROCHIP "JOALOKAHA E LE". MICROCHIP HA E ETSE LITLHAKISO KAPA LITIISETSO TSA MOFUTA OFE kapa O fe Ebang E BONAHALA KAPA E BONAHALA, E NGOLOA KAPA MOLOMO, MOLAO KAPA HO SE EMONG, E Amanang le LITSEBISO HO kenyeletsoa EMPA E SA FUMANE LE TIISETSO EFE KAPA EFE E FUMANEHLENG LE TLAMELO. BAKENG SA MORERO O KHETHEHILENG, KAPA LITIISETSO TSE AMANG LE MAEMO A OONA, BOLEMO, KAPA KETSAHALO EA OONA.
- HA HO LE TSATSAHALO, MICROCHIP E TLA BA MOTHO OA MOLATO BAKENG SA LITABA LIFE, TSE KHETHEHILENG, TSA KOTSI, TSATSAHALO, KAPA TAHLEHELO E LATELANG, TŠENYEHO, LITŠEnyehelo, KAPA LITJEHO TSA MOFUTA OFE O TLANG LE LITSEBISO KAPA TŠEBELETSO EA LONA, LE HO KA ETSAHALA KETSAHALO E ETSANG. TSE KA E KA ETSAHANG KAPA MESEKO E BONAHALA. HO FIHLELA KA HO FELENG KA HO FIHLELA HO DUMELLA KE MOLAO, BOIKARABELO KAOFELA BA MICROCHIP HO LIKELETSO KAOFELA KA TSELA EFE KAPA E MABAPI LE TSEBISETSO KAPA TŠEBELETSO EA YONA E KE KE E FEELA PALO EA LITEFO, HA E LE LI LE TENG, TSEO O LI LEFILENG KA THOHO HO MICROCHIP YA MICROCHIP.
- Tšebeliso ea lisebelisoa tsa Microchip ts'ehetso ea bophelo le/kapa lits'ebetso tsa ts'ireletso e kotsing ea moreki, 'me moreki o lumela ho sireletsa, ho qosa, le ho boloka Microchip e se nang kotsi ho tsoa lits'enyehelo, likopo, lisutu kapa litšenyehelo tse bakoang ke ts'ebeliso e joalo. Ha ho lilaesense tse fetisoang, ka mokhoa o hlakileng kapa ka tsela e 'ngoe, tlasa litokelo life kapa life tsa thepa ea mahlale a Microchip ntle le ha ho boletsoe ka tsela e ngoe.
Matšoao a khoebo
- Lebitso le logo ea Microchip, logo ea Microchip, Adaptec, AVR, logo ea AVR, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXSty Media, Micrologos, Micrologo, MOXSty , MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon, tradeSource ea XME, Tichyon, TradeSource ea XME ea UNITED, UNITED TRADING, TXME, TEKSTO, TEKNOX, TEKS E kenyelelitsoe USA le linaheng tse ling.
- AgileSwitch, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight Load, Libero, motor bench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, logo ea ProASIC Plus, Quiet-Wire, SmartFusion, SyncWorld , TimeCesium, TimeHub, TimePictra, TimeProvider, le ZL ke matshwao a kgwebo a ngodisitsweng a Microchip Technology Incorporated in the USA.
- Khatello e Haufi ea Key, AKS, Analog-for-the-Digital Age, AnyCapacitor, AnyIn, AnyOut, Augmented Switching, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEMAverage, dsPICDEMverage.net, , DAM, ECAN, Espresso T1S, EtherGREEN, EyeOpen, GridTime, IdealBridge, IGaT, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, maxCripto-Display, Marc. maxView, membrane, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mSiC, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, Power MOS IV, Power MOS 7, PowerSmart, PureSili , QMatrix, REAL ICE, Ripple Blocker, RTAX, RTG4, SAM-ICE, Serial Quad I/O,
- 'mapa o bonolo, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Kakaretso ea Mamello, Nako e Tšeptjoang, TSHARC, Turing, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock,
- XpressConnect le ZENA ke matšoao a khoebo a Microchip Technology Incorporated USA le linaheng tse ling.
- SQTP ke letšoao la ts'ebeletso la Microchip Technology Incorporated USA
- Letšoao la Adaptec, Frequency on Demand, Silicon Storage Technology, le Symmcom ke matšoao a ngolisitsoeng a khoebo a Microchip Technology Inc. linaheng tse ling.
- GestIC ke letshwao la kgwebo le ngodisitsweng la Microchip Technology Germany II GmbH & Co. KG, e leng lekala la Microchip Technology Inc., dinaheng tse ding.
- Matšoao a mang kaofela a boletsoeng mona ke thepa ea lik'hamphani tse fapaneng.
- © 2024, Microchip Technology Incorporated le lithuso tsa eona. Litokelo tsohle li sirelelitsoe.
- ISBN: 9781668339879
Tsamaiso ea Tsamaiso ea Boleng
- Ho fumana leseli mabapi le Tsamaiso ea Tsamaiso ea Boleng ea Microchip, ka kopo etela www.microchip.com/quality.
Lithekiso le Tšebeletso ea Lefatše Lohle
| LIMAKASE | ASIA/PACIFIC | ASIA/PACIFIC | ULAYA |
| Khampani Ofisi
2355 West Chandler Blvd. Chandler, AZ 85224-6199 Mohala: 480-792-7200 Fax: 480-792-7277 Tšehetso ea tekheniki: www.microchip.com/support Web Aterese: www.microchip.com Atlanta Duluth, GA Mohala: 678-957-9614 Fax: 678-957-1455 Austin, TX Mohala: 512-257-3370 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Mohala: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Mohala: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Mohala: 248-848-4000 Houston, TX Mohala: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Mohala: 317-536-2380 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Mohala: 951-273-7800 Raleigh, NC Mohala: 919-844-7510 E ncha York, NY Mohala: 631-435-6000 San Jose, CA Mohala: 408-735-9110 Mohala: 408-436-4270 Canada – Toronto Mohala: 905-695-1980 Fax: 905-695-2078 |
Australia – Sydney
Mohala: 61-2-9868-6733 China - Beijing Mohala: 86-10-8569-7000 China - Chengdu Mohala: 86-28-8665-5511 China - Chongqing Mohala: 86-23-8980-9588 China - Dongguan Mohala: 86-769-8702-9880 China - Guangzhou Mohala: 86-20-8755-8029 China - Hangzhou Mohala: 86-571-8792-8115 China – Hong Khong SAR Mohala: 852-2943-5100 China - Nanjing Mohala: 86-25-8473-2460 China - Qingdao Mohala: 86-532-8502-7355 China - Shanghai Mohala: 86-21-3326-8000 China - Shenyang Mohala: 86-24-2334-2829 China - Shenzhen Mohala: 86-755-8864-2200 China - Suzhou Mohala: 86-186-6233-1526 China - Wuhan Mohala: 86-27-5980-5300 China - Xian Mohala: 86-29-8833-7252 China - Xiamen Mohala: 86-592-2388138 China - Zhuhai Mohala: 86-756-3210040 |
India – Bangalore
Mohala: 91-80-3090-4444 India - New Delhi Mohala: 91-11-4160-8631 India – Pune Mohala: 91-20-4121-0141 Japane – Osaka Mohala: 81-6-6152-7160 Japane – Tokyo Mohala: 81-3-6880-3770 Korea - Daegu Mohala: 82-53-744-4301 Korea - Seoul Mohala: 82-2-554-7200 Malaysia - Kuala Lumpur Mohala: 60-3-7651-7906 Malaysia - Penang Mohala: 60-4-227-8870 Philippines – Manila Mohala: 63-2-634-9065 Singapore Mohala: 65-6334-8870 Taiwan - Hsin Chu Mohala: 886-3-577-8366 Taiwan - Kaohsiung Mohala: 886-7-213-7830 Taiwan - Taipei Mohala: 886-2-2508-8600 Thailand - Bangkok Mohala: 66-2-694-1351 Vietnam - Ho Chi Minh Mohala: 84-28-5448-2100 |
Austria – Wels
Mohala: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark – Copenhagen Mohala: 45-4485-5910 Fax: 45-4485-2829 Finland – Espoo Mohala: 358-9-4520-820 Fora - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Jeremane – Ho phunya Mohala: 49-8931-9700 Jeremane – Haan Mohala: 49-2129-3766400 Jeremane – Heilbronn Mohala: 49-7131-72400 Jeremane – Karlsruhe Mohala: 49-721-625370 Jeremane – Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Jeremane – Rosenheim Mohala: 49-8031-354-560 Iseraele – Ra'anana Mohala: 972-9-744-7705 Italy - Milan Mohala: 39-0331-742611 Fax: 39-0331-466781 Italy - Padova Mohala: 39-049-7625286 Netherlands - Drunen Mohala: 31-416-690399 Fax: 31-416-690340 Norway – Trondheim Mohala: 47-72884388 Poland - Warsaw Mohala: 48-22-3325737 Romania – Bucharest Tel: 40-21-407-87-50 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Gothenburg Tel: 46-31-704-60-40 Sweden - Stockholm Mohala: 46-8-5090-4654 UK - Wokingham Mohala: 44-118-921-5800 Fax: 44-118-921-5820 |
Litokomane / Lisebelisoa
 |
MICROCHIP v2.3 Gen 2 Selaoli sa Sesebelisoa [pdf] Bukana ea Mosebelisi v2.3, v2.2, v2.3 Gen 2 Selaoli sa Sesebelisoa, v2.3, Gen 2 Selaoli sa Sesebelisoa, Selaoli sa Sesebelisoa, Selaoli |
