MICROCHIP v2.3 Gen 2 Device Controller
Nhanganyaya
Iyi CoreRxIODBitAlign generic yekudzidzisa IP inoshandiswa muIO gearing block muRx nzira yeBit Alignment yakazvimirira yedata kana protocol iri kushandiswa. Iyo CoreRxIODBitAlign inokutendera kuti ugadzirise kunonoka munzira yedata maererano newachi nzira.
CoreRxIODBitAlign Summary
| Core Version | Gwaro iri rinoshanda kuCoreRxIODBitAlign v2.3 |
| Inotsigirwa Chishandiso | CoreRxIODBitAlign inotsigira mhuri dzinotevera: |
| Mhuri | • PolarFire® SoC |
| • PolarFire | |
| Cherechedza: Kuti uwane rumwe ruzivo, shanya iyo chigadzirwa peji | |
| Inotsigirwa Tool Flow | Inoda Libero® SoC v12.0 kana gare gare kuburitswa |
| Inotsigirwa Interfaces | — |
| Rezinesi | CoreRxIODBitAlign haidi rezinesi |
| Installation Instructions | CoreRxIODBitAlign inofanira kuiswa kuIP Catalog yeLibero SoC software otomatiki, kuburikidza neiyo IP Catalog yekuvandudza basa muLibero SoC software, kana kuti inotorwa nemaoko kubva pakabhuku. Kana iyo IP musimboti yaiswa muLibero SoC software IP Catalog, inogadziriswa, inogadzirwa, uye inomisikidzwa mukati meSmartDesign kuti ibatanidzwe muLibero purojekiti. |
| Kushandiswa Kwemidziyo uye
Performance |
Pfupiso yekushandiswa uye ruzivo rwekuita kweCoreRxIODBitAlign yakanyorwa mu8. Kushandiswa Kwemudziyo uye Perchimiro |
CoreRxIODBitAlign Shandura Rogi Ruzivo
Ichi chikamu chinopa yakazara pamusoroview yezvichangobva kubatanidzwa, kutanga neazvino kuburitswa. Kuti uwane rumwe ruzivo nezve matambudziko akagadziriswa, ona 7. Resolved Issues chikamu.
| CoreRxIODBitAlign v2.3 | Chii New • Yakagadziridzwa yeMIPI-based training mechanism |
| CoreRxIODBitAlign v2.2 | Chii Chitsva • Yakawedzerwa Kuruboshwe uye Kurudyi EYE Tap inononoka ruzivo mune yepamusoro module |
Features
CoreRxIODBitAlign ine zvinotevera maficha:
- Inotsigira Bit Alignment ine akasiyana Eye Widths 1–7
- Inotsigira akasiyana Fabric Double Data Rate (DDR) Modes 2/4/3p5/5
- Inotsigira Skip uye Restart / Bata michina
- Inotsigira Mobile Indasitiri processor Interface (MIPI) kudzidziswa kuburikidza neLP kusaina Kutanga kweFremu
- Inotsigira 256 Tap Kunonoka kweBit Alignment
Tsanangudzo Yekushanda
CoreRxIODBitLinganisa neRx IOD Interface
Iyi inotevera nhamba inoratidza yakakwira-level block dhizaini yeCoreRxIODBitAlign.
- Tsanangudzo inoreva iyo CoreRxIODBitAlign inotsigira PolarFire® uye PolarFire SoC zvishandiso.
- CoreRxIODBitAlign inoita kudzidziswa uye zvakare ine basa rekubatanidza IO Digital (IOD) zvishandiso uye IO Gearing (IOG) kutsigira seyakasimba sosi nekugadzirisa kunonoka kutora data nemazvo.
- Iyo yakakwana yekudzidzira nzira yekuyerera inotsanangurwa muchikamu che5. Nguva yeDiagrams.
- CoreRxIODBitAlign inotsigira zvine simba kuwedzera kana kubvisa kunonoka kubva munzira yedata maererano newachi nzira. Pano RX_DDRX_DYN Interface inopa zvidzoreso kuCoreRxIODBitAlign kuita wachi-kune-data margin kudzidziswa nekuwedzera kunonoka kwepombi munzira inokwira. CoreRxIODBitAlign, zvakare kune gare gare review (yega yega kunonoka kuwedzera), inochengetedza mamiriro emhinduro mireza kubva kuRX_DDRX_DYN Interface.
- Iyo CoreRxIODBitAlign inoenderera mberi nekudzidziswa kweyese tepi kuwedzera kusvika iyo RX_DDRX_DYN Interface yasvika kunze-kwe-renji mamiriro.
- Chekupedzisira, iyo CoreRxIODBitAlign inotsvaira yakazara mamiriro emhinduro mireza. Iyi nhanho inogonesa uye inoverengera kurongeka kwe data kuti ive 90 madhigirii akatarisana kubva kumacheto ewachi.
- Yekupedzisira yakaverengerwa kunonoka yepombi inoiswa muRX_DDRX_DYN Interface kuti ipedze iyo bit alignment kudzidziswa.
- Iwo maficha anotsigirwa neiyi CoreRxIODBitAlign akanyorwa zvakadzama sezvinotevera.
Dynamic Re-training Mechanism
- CoreRxIODBitAlign inoramba ichitarisisa iyo Feedback Status mireza (IOD_EARLY/IOD_LATE) uye inotarisa kana mireza iri kufamba.
- IP inotanga yagadzirisa matapi akaverengerwa ne+/- 4 tepi munzira inokwira kana pasi. Kunyangwe ipapo, kana mireza ikachinja, IP inokonzeresa kudzidziswa zvakare.
Bata Mechanism (Bvunza Mubvunzo)
- Ichi chimiro chinoshandiswa kana kudzidziswa kuchida kuve paHold state. Iyo BIT_ALGN_HOLD inoshanda-yepamusoro-yakavakirwa nhanho uye inofanirwa kusimbiswa kuti inobata uye kusasimbiswa kuti ienderere mberi nekudzidziswa.
- Iyo HOLD_TRNG parameter inofanirwa kusetwa kuita 1 mugadziriso kuti ivhure chinhu ichi. Iyi parameter inoiswa ku 0 nekukasira.
Restart Mechanism (Bvunza Mubvunzo)
- Iyi ficha inoshandiswa kutangazve kudzidziswa. Kuti utangezve kudzidziswa, iyo BIT_ALGN_RSTRT yekuisa inofanirwa kuisirwa wachi imwe chete pulse Serial Clock (SCLK).
- Izvi zvinotanga kuseta zvakare IP zvakapfava, izvo zvinogadzirisa BIT_ALGN_DONE kuenda ku0 uye BIT_ALGN_START ku1.
Skip Mechanism (Bvunza Mubvunzo)
- Ichi chimiro chinoshandiswa kana kudzidziswa kusiri kudikanwa, uye kudzidziswa kwakazara kunogona kupfuudzwa. Iyo BIT_ALGN_SKIP inoshanda-yepamusoro nhanho yakavakirwa manyorero uye inofanira kusimbiswa kusvetuka kudzidziswa kwakazara.
- Iyo SKIP_TRNG parameter inofanirwa kusetwa kune 1 mugadziriso kuti igone kushanda ichi. Iyi parameter inoiswa ku 0 nekukasira.
MIPI-based Training Mechanism (Bvunza Mubvunzo)
- Iyo MIPI_TRNG parameter inofanirwa kusetwa kune 1 mugadziriso kuti igone kuita ichi chimiro. Kana yaiswa, ipapo iyo LP_IN yekupinza chiteshi inowedzerwa kune CoreRxIODBitAlign.
- Iyo IP inoona inodonha mupendero weLP_IN yekuisa port, iyo inoratidza kwakakodzera kutanga kwefuremu kuti utange kudzidziswa.
CoreRxIODBitAlign Parameters uye Interface Signals
Configuration GUI Parameters (Bvunza Mubvunzo)
Iko hakuna zvigadziriso zvimiro zveiyi core kuburitswa.
Ports (Bvunza Mubvunzo)
Tafura inotevera inonyora masaini ekuisa uye ekubuda anoshandiswa mukugadzira kweCoreRxIODBitAlign.
Tafura 3-1. Kupinza uye Kubuda Zviratidzo
| Signal | Direction | Port width (bits) | Tsanangudzo |
| Wachi uye Reset | |||
| SILK | Input | 1 | Fabric wachi |
| PLL_LOCK | Input | 1 | PLL Kiya |
| RESET | Input | 1 | Active-Low asynchronous reset |
| Data bhasi uye Kudzora | |||
| IOD_EARLY | Input | 1 | Data ziso monitor yekutanga mureza |
| IOD_LATE | Input | 1 | Data ziso monitor yakanonoka mureza |
| IOD_ OOR | Input | 1 | Data ziso monitor kunze-kwe-ranji mureza wekunonoka mutsetse |
| BIT_ALGN_EYE_IN | Input | 3 | Mushandisi anoisa iyo data ziso rekutarisa upamhi |
| BIT_ALGN_RTRT | Input | 1 | Bit Align Kudzidzisa kutangazve (Pulse-based assertion) 1— Tangazve Kudzidzisa 0— Hapana Kutanga Kudzidzisa |
| BIT_ALGN_CLR_FLGS | Output | 1 | Bvisa Kare kana Kunonoka mireza |
| BIT_ALGN_LOAD | Output | 1 | Load default |
| BIT_ALGN_DIR | Output | 1 | Kunonoka mutsara kumusoro kana pasi nzira 1- Kumusoro (kuwedzera 1 tap) 0- Pasi (kuderera 1 tap) |
| BIT_ALGN_MOVE | Output | 1 | Wedzera kunonoka pakufamba pulse |
| BIT_ALIGN_SKIP | Input | 1 | Bit Align kudzidzira skip (Level based assertion)
1- Svetuka kudzidziswa uye inoshanda chete kana iyo SKIP_TRNG paramende yakaiswa ku1 0- Kudzidziswa kunofanirwa kuenderera semazuva ese |
| BIT_ALIGN_HOLD | Input | 1 | Bit Align kudzidzisa kubata (Level based assertion)
1- Bata kudzidziswa uye kushanda chete kana iyo HOLD_TRNG paramende yakaiswa ku1 0- Kudzidziswa kunofanirwa kuenderera semazuva ese |
| BIT_ALIGN_ERR | Output | 1 | Bit Align kudzidziswa kukanganisa (Level-based assertion) 1- Kanganiso 0- Hapana Mhosho |
| BIT_ALGN_START | Output | 1 | Bit Align kudzidziswa kutanga (Level-based assertion) 1— Yakatanga 0— Haina kutanga |
| BIT_ALGN_DONE | Output | 1 | Bit Align kudzidziswa kwaitwa (Level based assertion) 1- Yakapedzwa 0- Haina kupera |
| Signal | Direction | Port width (bits) | Tsanangudzo |
| LP_IN | Input | 1 | MIPI-yakavakirwa furemu kudzidziswa (Level based assertion)
1- Inoshanda-Yakaderera siginecha inofanirwa kutaura yakaderera kuratidza kutanga kwefuremu uye inofanira dessert chete pakupera kwefuremu. 0- Kudzidziswa kunofanirwa kuenderera seyakajairika uye chiratidzo ichi chinofanira kusungirirwa pasi mukati. |
| DEM_BIT_ALGN_TAPDLY | Output | 8 | Yakaverengerwa kunonoka kweTAP uye inoshanda kana BIT_ALGN_DONE yaiswa pamusoro neIP. |
| RX_BIT_ALIGN_LEFT_WIN | Output | 8 | Kuruboshwe Data Ziso chekutarisa kukosha
Cherechedza: Nhamba dzinoshanda chete kana BIT_ALGN_DONE yaiswa ku 1 uye BIT_ALGN_START yaiswa ku 0. Kana parameter SKIP_TRNG ikaiswa inodzosa 0. |
| RX_BIT_ALIGN_RGHT_WIN | Output | 8 | Right Data Ziso chekutarisa kukosha
Cherechedza: Nhamba dzinoshanda chete kana BIT_ALGN_DONE yaiswa ku 1 uye BIT_ALGN_START yaiswa ku 0. Kana parameter SKIP_TRNG ikaiswa inodzosa 0. |
Kuita CoreRxIODBitAlign muLibero Dhizaini Suite
SmartDesign (Bvunza Mubvunzo)
- CoreRxIODBitAlign pre-yakaiswa muSmartDesign IP deployment dhizaini nharaunda. Mufananidzo unotevera unoratidza exampiyo yakasimbiswa CoreRxIODBitAlign.
- Iyo yakakosha inogadziriswa uchishandisa hwindo rekugadzirisa muSmartDesign, sezvakaratidzwa muFigure 4-2.
- Kuti uwane rumwe ruzivo nezve kushandisa iyo SmartDesign kusimbisa uye kugadzira macores, ona SmartDesign User Guide.
Kugadzirisa CoreRxIODBitAlign muSmartDesign (Bvunza Mubvunzo)
- Iyo yakakosha inogadziriswa uchishandisa iyo yekumisikidza GUI mukati meSmartDesign sezvakaratidzwa mumufananidzo unotevera.
Simulation inoyerera (Bvunza Mubvunzo)
- Iyo mushandisi testbench yeCoreRxIODBitAlign inosanganisirwa mune zvese zvinoburitswa.
- Kuti umhanye masimulation, ita danho rinotevera: sarudza Mushandisi Testbench kuyerera muSmartDesign, wobva wadzvanya Sevha uye Gadzira pane Gadzira pane.
- Mushandisi testbench inosarudzwa kuburikidza neiyo core testbench Configuration GUI. Kana SmartDesign inogadzira iyo Libero® SoC purojekiti, inoisa mushandisi testbench files.
- Kuti umhanye mushandisi testbench, isa iyo dhizaini mudzi kuCoreRxIODBitAlign instantiation muLibero SoC dhizaini yehierarchy pane, wobva wadzvanya Simulation muLibero SoC Dhizaini Flow hwindo.
- Izvi zvinodaidzira ModelSim® uye inomhanyisa otomatiki simulation.
- Mufananidzo unotevera unoratidza example yesimulation subsystem. Inoshandisa iyo IOG_IOD chikamu DDRX4 uye DDTX4 mu loopback modhi ine CoreRxIODBitAlign yekufananidza.
- Pano, iyo data yePRBS inogadzirwa inofambiswa neDDTX4 serially kuDDRX4 uye pakupedzisira, iyo PRBS cheki inoshandiswa kutarisa kuvimbika kwedata mushure mekunge kudzidziswa kwapera.
Synthesis muLibero SoC (Bvunza Mubvunzo)
- Kuti umhanye synthesis neyakagadziriswa yakasarudzwa muiyo GUI yekumisikidza, isa dhizaini midzi zvakakodzera. Pasi peKushandisa Dhizaini, mune Dhizaini Inoyerera tebhu, tinya-kurudyi pane Synthesize uye tinya Mhanya.
Nzvimbo uye Nzira muLibero SoC (Bvunza Mubvunzo)
- Mushure mekuisa dhizaini midzi zvakakodzera uye kumhanya Synthesis. Pasi peKushandisa Dhizaini mune Dhizaini Flow tab, tinya-kurudyi pane Nzvimbo uye Nzira, uye tinya Mhanya.
Kubatanidzwa kweSystem (Bvunza Mubvunzo)
- Ichi chikamu chinonongedza kurerutsa kubatanidzwa kweCoreRxIODBitAlign.
- Iyo Rx/Tx IOG inoshandiswa inotsigira akawanda ekuisa uye kubuda modhi. Aya data uye wachi mareti anogona kunonoka uye mune dzimwe nguva nekukurumidza, zvichibva pane yekupedzisira silicon maitiro.
- Tafura inotevera inonyora data uye chiyero chewachi.
Tafura 4-1. Data uye Clock Rate
| IOG Mode | Direction | Gear Ratio | Max IO Data Rate Inotarisirwa | IO Clock Rate | Core Clock Rate | Data Type |
| DDRX4 | Input | 8:1 | 1600 Mbps | 800 MHz | 200 MHz | DDR |
Mufananidzo unotevera unoratidza exampiyo yeCoreRXIODBitAlign subsystem yekubatanidza.
- Iyo subsystem yakapfuura inoshandisa IOG_IOD chikamu DDRX4 uye DDTX4 muLoopback modhi ine CoreRxIODBitAlign yekufananidza. Pano, iyo data yePRBS inogadzirwa inofambiswa neIOG_IOD_DDRTX4_0, serially kuIOG_IOD_DDRX4_PF_0.
- CoreRxIODBitAlign inoita dzidziso (BIT_ALIGN_START yakaiswa ku 1, BIT_ALIGN_DONE yakaiswa ku 0) nechikamu IOG_IOD_DDRX4_PF_0, uye pekupedzisira, kana dzidziso yangoitwa (BIT_ALIGN_START yakaiswa ku 0, BIT_ALIGN_DONE yaiswa ku PR kutarisa kuti data i 1)
Testbench (Bvunza Mubvunzo)
- Testbench yakabatana inoshandiswa kuona uye kuyedza CoreRxIODBitAlign inonzi mushandisi testbench.
Mushandisi Testbench (Bvunza Mubvunzo)
- Iyo mushandisi testbench inosanganisirwa nekuburitswa kweCoreRxIODBitAlign iyo inosimbisa mashoma maficha eCoreRxIODBitAlign. Iyi inotevera nhamba inoratidza CoreRxIODBitAlign mushandisi testbench.
- Sezvaratidzwa mumufananidzo wapfuura, mushandisi testbench ine Microchip DirectCore CoreRxIODBitAlign DUT, PRBS_GEN, PRBS_CHK, CCC, IOG_IOD_TX, uye IOG_IOD_RX kuratidza muLoopback mode.
- Iyo Clock Conditioning Circuit (CCC) inotyaira CORE_CLK uye IO_CLK kana wachi yagadzikana.
- PRBS_GEN inotyaira iyo parallel data kuIOG_IOD_TX, uyezve IOG_ID_RX inogamuchira serial data yakafanana.
- Iyo CoreRxIODBitAlign DUT inoita kudzidziswa neIOD_CTRL masaini. Kana kudzidziswa kwapera, PRBS_CHK block inogoneswa kutarisa data kubva kuIOG_IOD_RX block yekuvimbika kwedata.
Zvakakosha: Mushandisi testbench inotsigira chete yakagadziriswa gadziriso.
Madhiyamu enguva
- Ichi chikamu chinotsanangura dhizaini yenguva yeCoreRxIODBitAlign.
CoreRxIODBitAlign Kudzidzisa Nguva Dhiagiramu (Bvunza Mubvunzo)
- Iyo inotevera dhizaini yenguva ndeye example yekutevedzana yekudzidziswa ine zvinotevera paramita.
- CoreRxIODBitAlign inoshanda zvichibva paFabric wachi kana SCLK, kana OUT2_FABCLK_* kubva kuCCC kana PLL component, uye PF_IOD_GENERIC_RX IOD chikamu chinoshandiswa chinoenderana neOUT*_HS_IO_CLK_* kana wachi yeBhangi kana BCLK yekurongeka zvishoma. Pano, iyo PF_IOD_GENERIC_RX IOD chikamu chinogashira serial data yekurongeka zvishoma. For example, kana nhamba inodiwa yedata iri 1000 Mbps paDDRx4 Fabric mode, ipapo OUT2_FABCLK_0 kana SCLK inofanira kubva paPLL kana CCC chikamu se125 MHz uye OUT0_HS_IO_CLK_0 kana BCLK kusvika PF_IOD_GENERIC_RX inofanira kuva 500 MHz.
- CoreRxIODBitAlign inotanga kudzidziswa kana PLL_LOCK yagadzikana uye ichityairwa kumusoro. Wobva watanga kudzidzira nekutyaira BIT_ALGN_START ichikwira uye BIT_ALGN_DONE ichidzika uye wobva wachaira zvinobuda BIT_ALGN_LOAD kurodha zvigadziriso zvagara zviri muPF_IOD_GENERIC_RX chikamu. Iyo BIT_ALGN_CLR_FLGS inoshandiswa kubvisa mireza yeIOD_EARLY, IOD_LATE, neBIT_ALGN_OOR.
- CoreRxIODBitAlign inoenderera mberi neBIT_ALGN_MOVE ichiteverwa neBIT_ALGN_CLR_FLGS yeTAP yega yega uye inorekodha IOD_EARLY neIOD_LATE mireza. Kana BIT_ALGN_OOR yaiswa pamusoro nePF_IOD_GENERIC_RX chikamu, CoreRxIODBitAlign inotsvaira yakarekodhwa KAZVO neKUNOGARA mireza uye inowana iyo yakakwana Mireza Yekutanga uye Yanonoka kuverenga inodiwa TAP kunonoka kwewachi uye data bit alignment.
- CoreRxIODBitAlign inotakura kunonoka kweTAP yakaverengerwa uye inotyaira BIT_ALGN_START yakaderera uye BIT_ALGN_DONE yakakwirira kuratidza kupera kwekudzidziswa.
- CoreRxIODBitAlign inoenderera mberi nekudzidzisa patsva zvine simba kana yaona mheremhere IOD_EARLY kana IOD_LATE kubva kuPF_IOD_GENERIC_RX chikamu. Pano, BIT_ALGN_DONE inoiswa patsva uye inotyairwa pasi uye BIT_ALGN_START inofambiswa mudenga zvakare neCoreRxIODBitAlign kuratidza kutangwa patsva kwedzidziso. Iyo yekubuda-yenguva counter kana yasvika panguva yekubuda mamiriro, inosimbisa iyo BIT_ALGN_ERR pakupera kwekudzidziswa.
- CoreRxIODBitAlign inopawo maitiro ekutangazve kuti mushandisi wekupedzisira atangezve kudzidziswa pese pazvinodiwa. Iyo BIT_ALGN_RSTRT inopinza iri active-high pulse inofanira kufambiswa kumusoro, semuenzanisoample, wachi sere.
- Pano BIT_ALGN_DONE yakagadziridzwa patsva uye yadzikiswa, uye BIT_ALGN_START inofambiswa pamusoro zvakare neCoreRxIODBitAlign, kuratidza kutanga patsva kwekudzidziswa.
- CoreRxIODBitAlign inopawo maitiro ekubata kubata kudzidziswa pakati. Pano HOLD_TRNG parameter inofanirwa kusetwa ku1, uyezve CoreRxIODBitAlign inoshandisa iyo BIT_ALGN_HOLD yekuisa uye inofanirwa kutaura inoshanda-yepamusoro nhanho zvichibva kusvika zvada CoreRxIODBitAlign kubata kudzidziswa uye yoenderera mberi nekudzidziswa kana iyo BIT_ALGN_HOLD yadzikiswa.
Zvimwe Zvinyorwa
- Ichi chikamu chinopa runyoro rwemamwe ruzivo.
- Kuti uwane zvigadziriso uye rumwe ruzivo nezve software, zvishandiso, uye Hardware, shanyira iyo Intellectual Property mapeji pa Microchip FPGA Intellectual Property Cores.
Matambudziko Anozivikanwa uye Magadzirirwo (Bvunza Mubvunzo)
- Iko hakuna zvinozivikanwa zvipimo kana workaround muCoreRxIODBitAlign v2.3.
Discontinued Features uye Zvishandiso (Bvunza Mubvunzo)
- Iko hakuna maficha akaregwa uye zvishandiso muCoreRxIODBitAlign v2.3.
Nyaya Dzakagadziriswa
- Tafura inotevera inonyora zvese zvakagadziriswa nyaya dzakasiyana dzeCoreRxIODbitAlign kuburitswa.
Tafura 7-1. Nyaya Dzakagadziriswa
| Kusunungurwa | Tsanangudzo |
| 2.3 | Iko hakuna nyaya dzakagadziriswa mune iyi v2.3 kuburitswa |
| 2.2 | Iko hakuna nyaya dzakagadziriswa mune iyi v2.2 kuburitswa |
| 1.0 | Kutanga Kusunungurwa |
Kushandiswa Kwemudziyo uye Kuita
Iyo CoreRxIODBitAlign macro inoshandiswa mumhuri dzakanyorwa patafura inotevera.
Tafura 8-1. Kushandiswa Kwemudziyo uye Kuita
| Mudziyo Details | FPGA Zviwanikwa | Kuita (MHz) | |||
| Mhuri | Mudziyo | DFF | LUTs | Logic Elements | SILK |
| PolarFire® | MPF300TS | 788 | 1004 | 1432 | 261 |
| PolarFire SoC | MPF250TS | 788 | 1004 | 1416 | 240 |
- Chinokosha: The data iri mutafura yakapfuura inowanikwa uchishandisa Libero® SoC v2023.2.
- Iyo data iri mutafura yapfuura inowanwa uchishandisa yakajairwa synthesis uye marongero.
- Iyo inotevera yepamusoro-level yekumisikidza GUI paramita yakagadziridzwa kubva kune yavo default kukosha.
- Aya anotevera ndiwo akasarudzika maitiro:
- SKIP_TRNG = 1
- HOLD_TRNG = 1
- MIPI_TRNG = 1
- DEM_TAP_WAIT_CNT_WIDTH = 3
- Zvinotevera zvisungo zvewachi zvinoshandiswa kuwana nhamba dzekuita:
- SCLK = 200 MHz
- Speed Giredhi = −1
- Kuburikidza kunoverengerwa sezvizvi: (Bit hupamhi/Nhamba yema cycles) × Clock Rate (Performance).
Revision History
Nhoroondo yekudzokorora inotsanangura shanduko dzakaitwa mugwaro. Kuchinja kwacho kunorongwa nekudzokorora, kutanga nebhuku razvino uno.
Tafura 9-1. Revision History
| Kudzokorora | Date | Tsanangudzo |
| B | 02/2024 | Iyi inotevera rondedzero yekuchinja mukudzokorora B kwegwaro:
• Yakagadziridzwa yeCoreRxIODBitAlign v2.3 • Yakawedzera Shandura logi ruzivo muchikamu cheIntroduction • Yakagadziridzwa 8. Kushandiswa Kwechishandiso uye Chikamu Chekuita • Yakawedzerwa 7. Chikamu Chenyaya Dzakagadziriswa |
| A | 03/2022 | Inotevera rondedzero yeshanduko mukudzokorora A yegwaro:
• Gwaro rakatamirwa kuMicrochip template • Nhamba yegwaro yakachinjwa kubva pa50200861 kuenda kuDS50003255 |
| 3 | — | Iyi inotevera rondedzero yeshanduko mukudzokorora 3 yegwaro:
• Yakagadziridzwa yeCoreRxIODBitAlign v2.2. • Yakagadziridzwa mushandisi gwara rekuruboshwe uye kurudyi data maziso masaini kumusoro. Kuti uwane rumwe ruzivo, tarisa mufananidzo 2-1 uye 3.2. Ports. |
| 2 | — | Iyi inotevera rondedzero yeshanduko mukudzokorora 2 yegwaro:
• Yakagadziridzwa yeCoreRxIODBitAlign v2.1. • Yakagadziridzwa: 2. Tsanangudzo Yekushanda uye 5. Madhiyamu enguva. |
| 1 | — | Revision 1.0 yaive yekutanga kuburitswa kwegwaro iri. Yakagadzirirwa CoreRxIODBitAlign v2.0. |
Microchip FPGA Tsigiro
- Microchip FPGA zvigadzirwa boka rinodzosera zvigadzirwa zvaro neakasiyana masevhisi ekutsigira, anosanganisira Customer Service, Customer Technical Support Center, a websaiti, uye mahofisi ekutengesa pasi rese.
- Vatengi vanokurudzirwa kushanyira Microchip online zviwanikwa vasati vabata rutsigiro sezvo paine mukana wekuti mibvunzo yavo yatopindurwa.
- Bata iyo Technical Support Center kuburikidza ne website pa www.microchip.com/support. Taura nezve
- FPGA Chidimbu Chikamu nhamba, sarudza yakakodzera kesi chikamu, uye kurodha dhizaini files paunenge uchigadzira tekinoroji yekutsigira kesi.
- Bata Mutengi Sevhisi kune isiri-tekinoroji yechigadzirwa rutsigiro, semitengo yechigadzirwa, kukwidziridzwa kwechigadzirwa, ruzivo rwekuvandudza, mamiriro eodha, uye mvumo.
- Kubva kuNorth America, fonera 8002621060
- Kubva kune dzimwe nyika, fonera 6503184460
- Fax, kubva kupi zvako munyika, 6503188044
Microchip Ruzivo
Iyo Microchip Website
- Microchip inopa online rutsigiro kuburikidza neyedu website pa www.microchip.com/. Izvi webnzvimbo inoshandiswa kugadzira files uye ruzivo runowanikwa nyore kune vatengi. Zvimwe zvezvinyorwa zviripo zvinosanganisira:
- Product Support -Datasheets uye errata, zvinyorwa zvekushandisa uye sample zvirongwa, zviwanikwa zvekugadzira, madhairekitori evashandisi uye magwaro ekutsigira Hardware, ichangoburwa kuburitswa kwesoftware uye software yakachengetwa
- General Technical Support -Mibvunzo Inowanzo bvunzwa (FAQs), zvikumbiro zvetsigiro yehunyanzvi, mapoka ekukurukurirana epamhepo, Microchip dhizaini dhizaini yenhengo chirongwa
- Bhizinesi reMicrochip - Chigadzirwa chekusarudza uye madhairekitori ekurongeka, ichangoburwa Microchip inoburitswa, rondedzero yemasemina uye zviitiko, rondedzero yeMicrochip mahofisi ekutengesa, vaparidzi, uye vamiriri vefekitari.
Product Change Notification Service
- Microchip's product change notification service inobatsira kuchengetedza vatengi varipo paMicrochip zvigadzirwa.
- Vanyoreri vanogashira zviziviso zveemail pese paine shanduko, zvigadziriso, zvidzokororo, kana errata ine chekuita neyakatsanangurwa chigadzirwa mhuri kana chishandiso chekusimudzira chekufarira.
- Kuti unyore, enda ku www.microchip.com/pcn uye tevera mirairo yekunyoresa.
Mutengi Support
- Vashandisi vezvigadzirwa zveMicrochip vanogona kugamuchira rubatsiro kuburikidza nematanho akati wandei:
- Distributor kana Mumiririri
- Local Sales Office
- Embedded Solutions Engineer (ESE)
- Technical Support
- Vatengi vanofanirwa kubata mugovera wavo, mumiriri, kana ESE kuti vawane rutsigiro. Mahofisi ekutengesa emunharaunda aripowo kubatsira vatengi. Rondedzero yemahofisi ekutengesa nenzvimbo inosanganisirwa mugwaro iri.
- Tsigiro yehunyanzvi inowanikwa kuburikidza ne websaiti pa: www.microchip.com/support
Microchip Devices Code Dziviriro Feature
- Cherechedza iyo inotevera tsanangudzo yekodhi yekudzivirira ficha pane Microchip zvigadzirwa.
- Zvigadzirwa zveMicrochip zvinosangana nezvakatsanangurwa zviri mune yavo chaiyo Microchip Data Sheet.
- Microchip inotenda kuti mhuri yayo yezvigadzirwa yakachengeteka kana ichishandiswa nenzira yakatarwa, mukati memaitiro ekushanda, uye pasi pemamiriro ezvinhu.
- Microchip inokoshesa uye inodzivirira zvine hukasha kodzero dzayo dzepfuma. Kuedza kutyora kodhi yekudzivirira maficha eMicrochip zvigadzirwa zvinorambidzwa zvachose uye zvinogona kutyora Digital Millennium Copyright Act.
- Kunyange Microchip kana chero imwe semiconductor inogadzira inogona kuvimbisa kuchengetedzwa kwekodhi yayo. Kudzivirirwa kwekodhi hazvireve kuti tiri kuvimbisa kuti chigadzirwa "hachiputsike".
- Kudzivirirwa kwekodhi kunogara kuchishanduka. Microchip yakazvipira kuramba ichivandudza kodhi yekudzivirira maficha ezvigadzirwa zvedu.
Legal Notice
- Ichi chinyorwa uye ruzivo rwuri pano runogona kushandiswa chete neMicrochip zvigadzirwa, zvinosanganisira kugadzira, kuyedza, uye kubatanidza zvigadzirwa zveMicrochip nechishandiso chako. Kushandiswa kweruzivo urwu neimwe nzira kunotyora aya mazwi. Ruzivo nezve maapplication emudziyo unopihwa chete kuti zvikunakire uye unogona kukwidziridzwa nekuvandudzwa. Ibasa rako kuona kuti application yako inosangana nezvako zvakatemwa. Bata hofisi yako yekutengesa Microchip kuti uwane rumwe rutsigiro kana, uwane rumwe rutsigiro pa www.microchip.com/en-us/support/design-help/client-support-services.
- RUZIVO IYI INOPIWA NE MICROCHIP "SESE ZVIRI". MICROCHIP HAIITA ZVINOmiririrwa KANA KUTI MWARATIDZO YERUPI RWERUDZI ZVINO ZVINOTAURA KANA ZVINOREVA, KUNYORA KANA KUTAURA, ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINO zvinosanganisira ASI ZVISI ZVINOGWADZIRWA KUTI ZVINO ZVINOREVA KUTI ZVINOTAURWA KUTI ZVINOTAURWA, ZVINOTAURWA, ZVINOTAURWA, ZVINOTAURWA. KUNE CHINANGWA CHAKATADZWA, KANA KUTI MAWARANTI ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVICHAITWA NEZVINHU ZVAKAITWA, HUNHU, KANA KUITA.
- HAPANA CHIITIKO CHICHAITWA MICROCHIP KUNE MHOSVA DZEPI ZVIRI KUNHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU , ZVINHU , ZVINOITWA , ZVAKAITIKA , KANA ZVINOTEVERA KURASIKA , KUPARADZWA , MUTEMO , KANA KUTI KUTI MUTE CHESE ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINHU ZVINO KANA MASHANDISI AWO, ZVISINEI ZVAKAITWA MAZANO ZVINOGONA KANA KUKABADZA ZVINOFONEKWA. ZVINO ZVIKURU ZVINOBVUNZWA NEMUTEMO, MICROCHIP YOSE YAKUBVIRA PAZVINOITWA ZVINHU ZVINHU ZVINHU ZVINHU ZVINOITWA NERUZVO KANA KUSHANDISWA KWAKO HAKUZOPIRI NHAMBA YEMARIPO, KANA ZVICHIDA, ZVAWABHADHARA WAKANGA KUTI KUTI UZIVE MICROCHIP.
- Kushandiswa kweMicrochip zvishandiso mukutsigira hupenyu uye / kana kuchengetedza zvikumbiro zviri panjodzi yemutengi, uye mutengi anobvuma kudzivirira, kubhadharira, uye kubata Microchip isingakuvadzi kubva kune chero kukuvadzwa, zvirevo, masutu, kana mari inokonzerwa nekushandiswa kwakadaro. Hapana marezinesi anofambiswa, zviri pachena kana neimwe nzira, pasi pekodzero chero ipi zvayo yeMicrochip intellectual property kunze kwekunge zvataurwa neimwe nzira.
Trademarks
- Iyo Microchip zita uye logo, iyo Microchip logo, Adaptec, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXTouchlus MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetri , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, uye XMEGA zviratidzo zvakanyoreswa zveMicrochip Technology Incorporated muUSA nedzimwe nyika.
- AgileSwitch, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight Load, Libero, motor bhenji, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet-Wire, SmartFusion, SyncWorld. , TimeCesium, TimeHub, TimePictra, TimeProvider, uye ZL zviratidzo zvakanyoreswa zveMicrochip Technology Incorporated muUSA.
- Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Chero Capacitor, AnyIn, AnyOut, Augmented Switching, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEMArage Average, dsPICDEMAverage.net , DAM, ECAN, Espresso T1S, EtherGREEN, EyeOpen, GridTime, IdealBridge, IGaT, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, maxCryLipto, max. maxView, membrane, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mSiC, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, Power MOS IV, Power MOS 7, PowerSmart, PureSili , QMatrix, REAL ICE, Ripple Blocker, RTAX, RTG4, SAM-ICE, Serial Quad I/O,
- mepu iri nyore, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Total Endurance, Nguva Yakavimbika, TSHARC, Turing, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock,
- XpressConnect uye ZENA zviratidzo zveMicrochip Technology Incorporated muUSA nedzimwe nyika.
- SQTP chiratidzo chesevhisi cheMicrochip Technology Incorporated muUSA
- The Adaptec logo, Frequency on Demand, Silicon Storage Technology, neSymmcom zviratidzo zvekutengeserana zveMicrochip Technology Inc. kune dzimwe nyika.
- GestIC ichiratidzo chekutengeserana chakanyoreswa cheMicrochip Technology Germany II GmbH & Co. KG, inotsigira Microchip Technology Inc., kune dzimwe nyika.
- Mamwe matrademark ese ataurwa pano ndeemakambani avo.
- © 2024, Microchip Technology Incorporated nemakambani ayo. All Rights Reserved.
- ISBN: 9781668339879
Quality Management System
- Kuti uwane ruzivo nezve Microchip's Quality Management Systems, ndapota shanya www.microchip.com/quality.
Munyika Yose Kutengesa uye Basa
| AMERICAS | ASIA/PACIFIC | ASIA/PACIFIC | EUROPE |
| Corporate Office
2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Tsigiro yehunyanzvi: www.microchip.com/support Web Kero: www.microchip.com Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Austin, TX Tel: 512-257-3370 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Vadivelu Comedy Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Tel: 317-536-2380 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Tel: 951-273-7800 Raleigh, NC Tel: 919-844-7510 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Tel: 408-436-4270 Kanadha – Toronto Tel: 905-695-1980 Fax: 905-695-2078 |
Ositireriya – Sydney
Tel: 61-2-9868-6733 China - Beijing Tel: 86-10-8569-7000 China – Chengdu Tel: 86-28-8665-5511 China - Chongqing Tel: 86-23-8980-9588 China - Dongguan Tel: 86-769-8702-9880 China - Guangzhou Tel: 86-20-8755-8029 China - Hangzhou Tel: 86-571-8792-8115 China – Hong Kong SAR Tel: 852-2943-5100 China – Nanjing Tel: 86-25-8473-2460 China – Qingdao Tel: 86-532-8502-7355 China - Shanghai Tel: 86-21-3326-8000 China – Shenyang Tel: 86-24-2334-2829 China - Shenzhen Tel: 86-755-8864-2200 China - Suzhou Tel: 86-186-6233-1526 China - Wuhan Tel: 86-27-5980-5300 China - Xian Tel: 86-29-8833-7252 China - Xiamen Tel: 86-592-2388138 China – Zhuhai Tel: 86-756-3210040 |
India – Bangalore
Tel: 91-80-3090-4444 India - New Delhi Tel: 91-11-4160-8631 India – Pune Tel: 91-20-4121-0141 Japani – Osaka Tel: 81-6-6152-7160 Japani – Tokyo Tel: 81-3-6880- 3770 Korea – Daegu Tel: 82-53-744-4301 Korea - Seoul Tel: 82-2-554-7200 Malaysia – Kuala Lumpur Tel: 60-3-7651-7906 Malaysia – Penang Tel: 60-4-227-8870 Firipaini – Manila Tel: 63-2-634-9065 Singapowo Tel: 65-6334-8870 Taiwan - Hsin Chu Tel: 886-3-577-8366 Taiwan - Kaohsiung Tel: 886-7-213-7830 Taiwan - Taipei Tel: 886-2-2508-8600 Tairendi - Bangkok Tel: 66-2-694-1351 Vietnam – Ho Chi Minh Tel: 84-28-5448-2100 |
Ositiriya – Wels
Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Dhenimaki – Copenhagen Tel: 45-4485-5910 Fax: 45-4485-2829 Finirendi – Espoo Tel: 358-9-4520-820 Furanzi - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Jerimani – garching Tel: 49-8931-9700 Jerimani – Haan Tel: 49-2129-3766400 Jerimani – Heilbronn Tel: 49-7131-72400 Jerimani – Karlsruhe Tel: 49-721-625370 Jerimani – Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Jerimani – Rosenheim Tel: 49-8031-354-560 Izirayeri – Ra'anana Tel: 972-9-744-7705 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Italy – Padova Tel: 39-049-7625286 Netherlands – Drunen Tel: 31-416-690399 Fax: 31-416-690340 Noweyi – Trondheim Nhare: 47-72884388 Porendi – Warsaw Tel: 48-22-3325737 Romaniya – Bucharest Tel: 40-21-407-87-50 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Gothenburg Tel: 46-31-704-60-40 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 Fax: 44-118-921-5820 |
Zvinyorwa / Zvishandiso
 |
MICROCHIP v2.3 Gen 2 Device Controller [pdf] Bhuku reMushandisi v2.3, v2.2, v2.3 Gen 2 Device Controller, v2.3, Gen 2 Device Controller, Device Controller, Controller |
