ZigBee Smart plug
Manual pangguna

Pambuka produk

Bobot piranti kurang saka 1 kg. Dhuwur instalasi kurang saka 2 m dianjurake.

Instruksi instalasi

1. Pateni Kanggo ngindhari kejut listrik, hubungi dealer utawa profesional sing nduweni kualifikasi kanggo bantuan nalika nginstal lan ndandani.
2. instruksi Wiring
   Priksa manawa kabel sing bener sadurunge nguripake piranti. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Spesifikasi

Jinis produk	Zigbee Smart Plug
Input	100-240VAC 50/60Hz
Output	100-240VAC 50/60Hz
Maks. Muat	10A / 13A / 16A / 20A
ZigBee	IEEE 802.15.4 2.4GHZ
Bahan	PC VO

Fitur

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Remote Control	Jadwal wektu
Kontrol Swara	Enggo bareng Kontrol
Adegan Cerdas

The above functions are determined by the ZigBee Hub.

Instruksi Operasi

1. Ngundhuh APP
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Hue

2. Sambungan hub
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo Studio
   Echo Plus (model: ZE39KL)
   Pertunjukan Echo Generasi kaping 2 (model: DW84JL)
   Echo Plus Generasi kaping 2 (model: L9D29R)
   Samsung SmartThings hub
   Philips Hue Kab
   Yen sambungan gagal, mangga pindhah hub nyedhaki telpon lan nyoba maneh.
3. Daya urip
   Sawise diuripake, piranti bakal mlebu ing mode pasangan nalika nggunakake pisanan, lan indikator sinyal LED sumunar.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Nyambung menyang Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Sambungake menyang SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Reset pabrik

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Made in China

Dokumen / Sumber Daya

ZigBee Light Switch Module [pdf] Manual pangguna Light Switch Module, Switch Module, Module

Referensi

• Manual pangguna