ZigBee Smart plug
User Manual
Panimula ng Produkto
Ang bigat ng device ay mas mababa sa 1 kg. Inirerekomenda ang taas ng pag-install na mas mababa sa 2 m.
Mga tagubilin sa pag-install
- Power off
Upang maiwasan ang mga electric shock, mangyaring kumonsulta sa dealer o isang kwalipikadong propesyonal para sa tulong kapag nag-i-install at nagkukumpuni. - Pagtuturo sa mga kable
Tiyaking tama ang mga kable bago i-on ang device.
S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.
Mga pagtutukoy
| Uri ng Produkto | Zigbee Smart Plug |
| Input | 100-240VAC 50/60Hz |
| Output | 100-240VAC 50/60Hz |
| Todong kargahe | 10A/13A/16A/20A |
| ZigBee | IEEE 802.15.4 2.4GHZ |
| materyal | PC VO |
Mga tampok
ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.
 Remote Control |
 Iskedyul ng Oras |
 Kontrol ng Boses |
 Ibahagi ang Kontrol |
 Matalinong Eksena |
|
The above functions are determined by the ZigBee Hub.
Pagtuturo sa Pagpapatakbo
- I-download ang APP
Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:
SmartThings Amazon Alexa Hue - Koneksyon sa hub
Set the hub according to the user guide.
Support ZigBee plug hubs as follows:
Echo Studio
Echo Plus (modelo: ZE39KL)
2nd Gen Echo Show (modelo: DW84JL)
2nd Gen Echo Plus (modelo: L9D29R)
Hub ng Samsung SmartThings
Philips Hue
Kung nabigo ang koneksyon, mangyaring ilipat ang hub palapit sa iyong telepono at subukang muli. - Power on
Pagkatapos mag-on, papasok ang device sa pairing mode sa unang paggamit, at ang LED signal indicator ay kumikislap.
The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release. - Kumonekta kay Alexa
1. Power on the Plug
2. Ask, “Alexa, discover devices!
3. Plug ashes once it’s connected
4. Wait until Alexa finishes, check the new devices” First/Second….plug”
Kumonekta sa SmartThings
- Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
- Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”
Factory Reset
Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.
If you pair the device with the hub again, please reset the device to factory default.
Ginawa sa China
Mga Dokumento / Mga Mapagkukunan
 |
ZigBee Light Switch Module [pdf] User Manual Light Switch Module, Switch Module, Module |