ZigBee Smart plug
Llawlyfr Defnyddiwr

Cyflwyniad Cynnyrch

Mae pwysau'r ddyfais yn llai nag 1 kg. Argymhellir uchder gosod o lai na 2 m.

Cyfarwyddiadau gosod

1. Pŵer i ffwrdd Er mwyn osgoi siociau trydan, cysylltwch â'r deliwr neu weithiwr proffesiynol cymwys am gymorth wrth osod a thrwsio.
2. Cyfarwyddyd gwifrau
   Sicrhewch fod y gwifrau'n gywir cyn gyrru'r ddyfais ymlaen. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Manylebau

Math o Gynnyrch	Plug Smart Zigbee
Mewnbwn	100-240VAC 50/60Hz
Allbwn	100-240VAC 50/60Hz
Max.Llwyth	10A/13A/16A/20A
ZigBee	IEEE 802.15.4 2.4GHZ
Deunydd	PC VO

Nodweddion

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Rheolaeth Anghysbell	Amserlen Amseru
Rheoli Llais	Rheoli Rhannu
Golygfa Smart

The above functions are determined by the ZigBee Hub.

Cyfarwyddyd Gweithredu

1. Lawrlwythwch yr APP
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Llew

2. Cysylltiad canolbwynt
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Stiwdio Echo
   Echo Plus (model: ZE39KL)
   2il Sioe Gen Echo (model: DW84JL)
   2il Gen Echo Plus (model: L9D29R)
   Samsung SmartThings canolbwynt
   Philips Hue
   Os bydd y cysylltiad yn methu, symudwch y canolbwynt yn agosach at eich ffôn a rhoi cynnig arall arni.
3. Pŵer ymlaen
   Ar ôl pweru ymlaen, bydd y ddyfais yn mynd i mewn i'r modd paru yn ystod y defnydd cyntaf, ac mae'r dangosydd signal LED yn fflachio.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Cysylltwch â Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Cysylltu â SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Ailosod Ffatri

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Wedi'i wneud yn Tsieina

Dogfennau / Adnoddau

Modiwl Switsh Golau ZigBee [pdfLlawlyfr Defnyddiwr Modiwl Switsh Golau, Modiwl Switsh, Modiwl

Cyfeiriadau

• Llawlyfr Defnyddiwr