ZigBee Smart plug
Gebruikershandleiding

Produk Inleiding

Die toestel se gewig is minder as 1 kg. Die installasiehoogte van minder as 2 m word aanbeveel.

Installasie-instruksies

1. Krag af Om elektriese skokke te vermy, raadpleeg asseblief die handelaar of 'n gekwalifiseerde professionele persoon vir hulp met installering en herstel.
2. Bedrading instruksie
   Maak seker dat die bedrading korrek is voordat die toestel aangeskakel word. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Spesifikasies

Produk Tipe	Zigbee slimprop
Invoer	100-240VAC 50/60Hz
Uitset	100-240VAC 50/60Hz
Max.Lading	10A/13A/16A/20A
ZigBee	IEEE 802.15.4 2.4GHZ
Materiaal	PC VO

Kenmerke

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Afstandbeheer	Tydskedule
Stembeheer	Deelbeheer
Slim toneel

The above functions are determined by the ZigBee Hub.

Bedryfsinstruksie

1. Laai die APP af
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   Slim dinge	Amazon Alexa	Tint

2. Hubverbinding
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo Studio
   Echo Plus (model: ZE39KL)
   2de Gen Echo Show (model: DW84JL)
   2de Gen Echo Plus (model: L9D29R)
   Samsung SmartThings-hub
   Philips Hue
   As die verbinding misluk, skuif asseblief die spilpunt nader aan jou foon en probeer weer.
3. Krag aan
   Nadat dit aangeskakel is, sal die toestel die saambindmodus betree tydens die eerste gebruik, en die LED-sein-aanwyser flikker.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Koppel aan Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Koppel aan SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Fabrieksterugstelling

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Gemaak in China

Dokumente / Hulpbronne

ZigBee Ligskakelaarmodule [pdfGebruikershandleiding Ligskakelaarmodule, Skakelaarmodule, Module

Verwysings

• Gebruikershandleiding