ZigBee Smart plug
Uputstvo za upotrebu

Uvod u proizvod

Težina uređaja je manja od 1 kg. Preporuča se visina ugradnje manja od 2 m.

Upute za instalaciju

1. Isključite napajanje Da biste izbjegli strujni udar, obratite se prodavaču ili kvalificiranom stručnjaku za pomoć prilikom instaliranja i popravka.
2. Uputstvo za ožičenje
   Provjerite ispravno ožičenje prije nego što uključite uređaj. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Specifikacije

Vrsta proizvoda	Zigbee pametni utikač
Input	100-240VAC 50/60Hz
Izlaz	100-240VAC 50/60Hz
Max.Tovar	10A/13A/16A/20A
ZigBee	IEEE 802.15.4 2.4GHZ
Materijal	PC VO

Karakteristike

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Daljinski upravljač	Vremenski raspored
Voice Control	Dijeli kontrolu
Pametna scena

The above functions are determined by the ZigBee Hub.

Uputstvo za upotrebu

1. Preuzmite APLIKACIJU
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Hue

2. Konekcija čvorišta
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo Studio
   Echo Plus (model: ZE39KL)
   Echo Show 2. generacije (model: DW84JL)
   Echo Plus 2. generacije (model: L9D29R)
   Samsung SmartThings čvorište
   Philips Hue
   Ako veza ne uspije, pomaknite čvorište bliže telefonu i pokušajte ponovo.
3. Uključite napajanje
   Nakon uključivanja, uređaj će ući u režim uparivanja tokom prve upotrebe, a LED indikator signala treperi.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Povežite se na Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Povežite se na SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Factory Reset

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Proizvedeno u Kini

Dokumenti / Resursi

ZigBee Light Switch Module [pdf] Korisnički priručnik Light Switch Module, Switch Module, Module

Reference

• Uputstvo za upotrebu