ZigBee Smart plug
User Manual
Product Sumo
Uremu hwechigadzirwa huri pasi pe1 kg. Iyo yekuisa kureba isingasviki 2 m inokurudzirwa.
Kuisa mirayiridzo
- Kudzima
Kuti udzivise kuvhunduka kwemagetsi, ndapota bvunza mutengesi kana nyanzvi inokwanisa kuti ubatsirwe pakuisa nekugadzirisa. - Wiring mirayiridzo
Ita shuwa kuti waya wakakodzera usati wabatidza mudziyo.
S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.
Zvinotsanangurwa
| Product Type | Zigbee Smart Plug |
| Input | 100-240VAC 50/60Hz |
| Output | 100-240VAC 50/60Hz |
| Max.Road | 10A/13A/16A/20A |
| ZigBee | IEEE 802.15.4 2.4GHZ |
| Material | PC VO |
Features
ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.
 Remote Control |
 Nguva Yekuronga |
 Voice Control |
 Share Control |
 Smart Chiitiko |
|
The above functions are determined by the ZigBee Hub.
Operating Instruction
- Dhaunirodha APP
Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:
SmartThings Amazon Alexa Hue - Hub kubatana
Set the hub according to the user guide.
Support ZigBee plug hubs as follows:
Echo Studio
Echo Plus (modhi: ZE39KL)
2nd Gen Echo Show (muenzaniso: DW84JL)
2nd Gen Echo Plus (muenzaniso: L9D29R)
Samsung SmartThings hub
Philips Hue
Kana kubatana kukakanika, ndapota fambisa hub pedyo nefoni yako uye edza zvakare. - Power on
Mushure mekuisa simba, chishandiso chinopinda muchimiro chekubatanidza panguva yekutanga kushandiswa, uye chiratidzo che LED chinopenya.
The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release. - Batanidza ku Alexa
1. Power on the Plug
2. Ask, “Alexa, discover devices!
3. Plug ashes once it’s connected
4. Wait until Alexa finishes, check the new devices” First/Second….plug”
Unganidza kune SmartThings
- Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
- Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”
Factory Reset
Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.
If you pair the device with the hub again, please reset the device to factory default.
Yakagadzirwa muChina
Zvinyorwa / Zvishandiso
 |
ZigBee Light Switch Module [pdf] User Manual Light Switch Module, Switch Module, Module |