ZigBee Smart plug
ಬಳಕೆದಾರ ಕೈಪಿಡಿ
ಉತ್ಪನ್ನ ಪರಿಚಯ
ಸಾಧನದ ತೂಕವು 1 ಕೆಜಿಗಿಂತ ಕಡಿಮೆಯಿದೆ. 2 ಮೀ ಗಿಂತ ಕಡಿಮೆಯಿರುವ ಅನುಸ್ಥಾಪನೆಯ ಎತ್ತರವನ್ನು ಶಿಫಾರಸು ಮಾಡಲಾಗಿದೆ.
ಅನುಸ್ಥಾಪನಾ ಸೂಚನೆಗಳು
- ಪವರ್ ಆಫ್
ವಿದ್ಯುತ್ ಆಘಾತಗಳನ್ನು ತಪ್ಪಿಸಲು, ಸ್ಥಾಪಿಸುವಾಗ ಮತ್ತು ದುರಸ್ತಿ ಮಾಡುವಾಗ ಸಹಾಯಕ್ಕಾಗಿ ಡೀಲರ್ ಅಥವಾ ಅರ್ಹ ವೃತ್ತಿಪರರನ್ನು ಸಂಪರ್ಕಿಸಿ.
- ವೈರಿಂಗ್ ಸೂಚನೆ
ಸಾಧನವನ್ನು ಆನ್ ಮಾಡುವ ಮೊದಲು ಸರಿಯಾದ ವೈರಿಂಗ್ ಅನ್ನು ಖಚಿತಪಡಿಸಿಕೊಳ್ಳಿ.
S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.
ವಿಶೇಷಣಗಳು
ಉತ್ಪನ್ನದ ಪ್ರಕಾರ | ಜಿಗ್ಬೀ ಸ್ಮಾರ್ಟ್ ಪ್ಲಗ್ |
ಇನ್ಪುಟ್ | 100-240VAC 50/60Hz |
ಔಟ್ಪುಟ್ | 100-240VAC 50/60Hz |
ಗರಿಷ್ಠ. ಲೋಡ್ | 10A/13A/16A/20A |
ಜಿಗ್ಬೀ | IEEE 802.15.4 2.4GHZ |
ವಸ್ತು | ಪಿಸಿ VO |
ವೈಶಿಷ್ಟ್ಯಗಳು
ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.
![]() |
![]() |
![]() |
![]() |
![]() |
The above functions are determined by the ZigBee Hub.
ಆಪರೇಟಿಂಗ್ ಸೂಚನೆ
- APP ಡೌನ್ಲೋಡ್ ಮಾಡಿ
Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:ಸ್ಮಾರ್ಟ್ ಥಿಂಗ್ಸ್ ಅಮೆಜಾನ್ ಅಲೆಕ್ಸಾ ವರ್ಣ - ಹಬ್ ಸಂಪರ್ಕ
Set the hub according to the user guide.Support ZigBee plug hubs as follows:
ಎಕೋ ಸ್ಟುಡಿಯೋ
ಎಕೋ ಪ್ಲಸ್ (ಮಾದರಿ: ZE39KL)
2ನೇ ಜನ್ ಎಕೋ ಶೋ (ಮಾದರಿ: DW84JL)
2ನೇ ಜನ್ ಎಕೋ ಪ್ಲಸ್ (ಮಾದರಿ: L9D29R)
Samsung SmartThings ಹಬ್
ಫಿಲಿಪ್ಸ್ ಹ್ಯೂ
ಸಂಪರ್ಕ ವಿಫಲವಾದರೆ, ದಯವಿಟ್ಟು ನಿಮ್ಮ ಫೋನ್ಗೆ ಹಬ್ ಅನ್ನು ಸರಿಸಿ ಮತ್ತು ಮತ್ತೆ ಪ್ರಯತ್ನಿಸಿ.
- ಪವರ್ ಆನ್
ಪವರ್ ಆನ್ ಮಾಡಿದ ನಂತರ, ಸಾಧನವು ಮೊದಲ ಬಳಕೆಯ ಸಮಯದಲ್ಲಿ ಜೋಡಣೆ ಮೋಡ್ ಅನ್ನು ಪ್ರವೇಶಿಸುತ್ತದೆ ಮತ್ತು ಎಲ್ಇಡಿ ಸಿಗ್ನಲ್ ಸೂಚಕವು ಮಿನುಗುತ್ತದೆ.
The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
- ಅಲೆಕ್ಸಾಗೆ ಸಂಪರ್ಕಪಡಿಸಿ
1. Power on the Plug
2. Ask, “Alexa, discover devices!
3. Plug ashes once it’s connected
4. Wait until Alexa finishes, check the new devices” First/Second….plug”
SmartThings ಗೆ ಸಂಪರ್ಕಪಡಿಸಿ
- Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
- Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”
ಫ್ಯಾಕ್ಟರಿ ಮರುಹೊಂದಿಸಿ
Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.
If you pair the device with the hub again, please reset the device to factory default.
ಚೀನಾದಲ್ಲಿ ತಯಾರಿಸಲಾಗುತ್ತದೆ
ದಾಖಲೆಗಳು / ಸಂಪನ್ಮೂಲಗಳು
![]() |
ಜಿಗ್ಬೀ ಲೈಟ್ ಸ್ವಿಚ್ ಮಾಡ್ಯೂಲ್ [ಪಿಡಿಎಫ್] ಬಳಕೆದಾರರ ಕೈಪಿಡಿ ಲೈಟ್ ಸ್ವಿಚ್ ಮಾಡ್ಯೂಲ್, ಸ್ವಿಚ್ ಮಾಡ್ಯೂಲ್, ಮಾಡ್ಯೂಲ್ |