ZigBee Smart plug
Tusi Taiala

Folasaga o oloa

Ole mamafa ole masini e itiiti ifo ile 1 kilokalama. O le maualuga o le faʻapipiʻiina e itiiti ifo i le 2 m e fautuaina.

Fa'atonuga fa'apipi'i

1. Pepe le paoa Ina ia aloese mai le te'i eletise, fa'amolemole fa'afeso'ota'i le fa'atau po'o se tagata tomai fa'apitoa mo se fesoasoani pe a fa'apipi'i ma lipea.
2. Fa'atonuga uaea
   Ia mautinoa sa'o uaea a'o le'i fa'aola le masini. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Fa'amatalaga

Ituaiga Oloa	Zigbee Smart momono
Ulufale	100-240VAC 50/60Hz
Tuuina atu	100-240VAC 50/60Hz
Max. Avega	10A/13A/16A/20A
ZigBee	IEEE 802.15.4 2.4GHZ
Mea	PC VO

Vaega

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Pulea Mamao	Fa'asologa o Taimi
Pulea leo	Fa'asoa Pulea
Vaʻaiga Atamai

The above functions are determined by the ZigBee Hub.

Fa'atonuga o Galuega

1. La'u mai le APP
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Hue

2. So'oga Hub
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo Studio
   Echo Plus (fa'ata'ita'iga: ZE39KL)
   2nd Gen Echo Show (fa'ata'ita'iga: DW84JL)
   2nd Gen Echo Plus (fa'ata'ita'iga: L9D29R)
   Samsung SmartThings hub
   Philips Hue
   Afai e le manuia le feso'ota'iga, fa'amolemole fa'alatalata le fa'aoga i lau telefoni ma toe taumafai.
3. Malosiaga
   A mae'a ona fa'aola, o le a ulufale le masini i le faiga fa'alua i le taimi muamua o le fa'aoga, ma emo le fa'ailo fa'ailo LED.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Faʻafesoʻotaʻi i Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Fesoʻotaʻi i SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Toe Fa'afalega

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Faia i Saina

Pepa / Punaoa

ZigBee Light Switch Module [pdf] Tusi Taiala Module Suiga Malamalama, Suiga Module, Module

Fa'asinomaga

• Tusi Taiala