ZigBee Smart plug
Buku Logwiritsa Ntchito

Chiyambi cha Zamalonda

Kulemera kwa chipangizocho ndi kosakwana 1 kg. Kutalika kwa unsembe wosakwana 2 m tikulimbikitsidwa.

Malangizo oyika

1. Muzimitsa Kuti mupewe kugwedezeka kwa magetsi, chonde funsani wogulitsa kapena katswiri wodziwa kuti akuthandizeni pakuyika ndi kukonza.
2. Wiring malangizo
   Onetsetsani kuti pali mawaya olondola musanayatse chipangizocho. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Zofotokozera

Mawonekedwe

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Kuwongolera Kwakutali	Ndandanda ya Nthawi
Kuwongolera Mawu	Share Control
Masewera Ochenjera

The above functions are determined by the ZigBee Hub.

Malangizo Oyendetsera Ntchito

1. Tsitsani APP
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Uwu

2. Mgwirizano wa hub
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo Studio
   Echo Plus (chitsanzo: ZE39KL)
   2nd Gen Echo Show (chitsanzo: DW84JL)
   2nd Gen Echo Plus (chitsanzo: L9D29R)
   Samsung SmartThings hub
   Philips Hue
   Ngati kulumikizana kwalephera, chonde yandikitsani pafupi ndi foni yanu ndikuyesanso.
3. Yatsani
   Pambuyo poyatsa, chipangizocho chidzalowa mumayendedwe ophatikizana pakugwiritsa ntchito koyamba, ndipo chizindikiro cha LED chimawala.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Lumikizani ku Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Lumikizani ku SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Bwezerani Fakitale

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Chopangidwa ku China

Zolemba / Zothandizira

ZigBee Light Switch Module [pdf] Buku Logwiritsa Ntchito Light Switch Module, Switch Module, Module

Maumboni

• Buku Logwiritsa Ntchito