ZigBee Smart plug
Notendahandbók

Vörukynning

Þyngd tækisins er minna en 1 kg. Mælt er með uppsetningarhæð minni en 2 m.

Uppsetningarleiðbeiningar

1. Slökkvið á Til að forðast raflost, vinsamlegast hafðu samband við söluaðila eða viðurkenndan fagmann til að fá aðstoð við uppsetningu og viðgerðir.
2. Leiðbeiningar um raflögn
   Gakktu úr skugga um að raflögn séu rétt áður en þú kveikir á tækinu. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Tæknilýsing

Vörutegund	Zigbee snjallstunga
Inntak	100-240VAC 50/60Hz
Framleiðsla	100-240VAC 50/60Hz
Hámarkshleðsla	10A/13A/16A/20A
ZigBee	IEEE 802.15.4 2.4GHZ
Efni	PC VO

Eiginleikar

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Fjarstýring	Tímasetningaráætlun
Raddstýring	Deila stjórn
Snjöll umhverfi

The above functions are determined by the ZigBee Hub.

Rekstrarleiðbeiningar

1. Sækja APP
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Litbrigði

2. Miðstöð tenging
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo stúdíó
   Echo Plus (gerð: ZE39KL)
   2. Gen Echo Show (gerð: DW84JL)
   2. Gen Echo Plus (gerð: L9D29R)
   Samsung SmartThings miðstöð
   Philips Hue
   Ef tengingin mistekst, vinsamlegast færðu miðstöðina nær símanum þínum og reyndu aftur.
3. Kveikt á
   Eftir að kveikt er á því fer tækið í pörunarstillingu við fyrstu notkun og LED merki vísirinn blikkar.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Tengdu Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Tengstu við SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Factory Reset

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Framleitt í Kína

Skjöl / auðlindir

ZigBee ljósrofaeining [pdfNotendahandbók Ljósrofaeining, rofaeining, eining

Heimildir

• Notendahandbók