ZigBee Smart plug
Kasutusjuhend
Toote tutvustus
Seadme kaal on alla 1 kg. Soovitatav on paigalduskõrgus alla 2 m.
Paigaldusjuhised
- Toide välja
Elektrilöökide vältimiseks konsulteerige paigaldamise ja parandamise ajal abi saamiseks edasimüüja või kvalifitseeritud spetsialistiga. - Juhtmete ühendamise juhend
Enne seadme sisselülitamist veenduge, et juhtmestik on õige.
S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.
Tehnilised andmed
| Toote tüüp | Zigbee nutikas pistik |
| Sisend | 100-240VAC 50/60Hz |
| Väljund | 100-240VAC 50/60Hz |
| Maksimaalne koormus | 10A/13A/16A/20A |
| ZigBee | IEEE 802.15.4 2.4GHZ |
| Materjal | PC VO |
Omadused
ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.
 Kaugjuhtimispult |
 Ajakava |
 Hääljuhtimine |
 Jaga juhtimist |
 Nutikas stseen |
|
The above functions are determined by the ZigBee Hub.
Kasutusjuhend
- Laadige APP alla
Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:
SmartThings Amazon Alexa Toon - Jaoturi ühendus
Set the hub according to the user guide.
Support ZigBee plug hubs as follows:
Echo stuudio
Echo Plus (mudel: ZE39KL)
2. põlvkonna kajasaade (mudel: DW84JL)
2. põlvkonna Echo Plus (mudel: L9D29R)
Samsung SmartThingsi jaotur
Philipsi toon
Kui ühenduse loomine ebaõnnestub, viige jaotur telefonile lähemale ja proovige uuesti. - Toide sisse
Pärast sisselülitamist lülitub seade esmakordsel kasutamisel sidumisrežiimi ja LED-signaalindikaator vilgub.
The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release. - Ühendage Alexaga
1. Power on the Plug
2. Ask, “Alexa, discover devices!
3. Plug ashes once it’s connected
4. Wait until Alexa finishes, check the new devices” First/Second….plug”
Ühendage SmartThingsiga
- Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
- Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”
Tehaseseaded
Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.
If you pair the device with the hub again, please reset the device to factory default.
Valmistatud Hiinas
Dokumendid / Ressursid
 |
ZigBee valguslüliti moodul [pdfKasutusjuhend Valguslüliti moodul, lüliti moodul, moodul |