ZigBee Smart plug
Manual de usuario

Introdución do produto

O peso do dispositivo é inferior a 1 kg. Recoméndase unha altura de instalación inferior a 2 m.

Instrucións de instalación

1. Apagar Para evitar descargas eléctricas, consulte co distribuidor ou cun profesional cualificado para obter axuda ao instalar e reparar.
2. Instrución de cableado
   Asegúrese de que o cableado é correcto antes de acender o dispositivo. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Especificacións

Tipo de produto	Enchufe intelixente Zigbee
Entrada	100-240 VCA 50/60 Hz
Saída	100-240 VCA 50/60 Hz
Carga máx	10A/13A/16A/20A
ZigBee	IEEE 802.15.4 2.4GHZ
Material	PC VO

Características

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Control remoto	Cronograma
Control de voz	Compartir Control
Escena intelixente

The above functions are determined by the ZigBee Hub.

Instrución de funcionamento

1. Descarga a APP
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Hue

2. Conexión de hub
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo Studio
   Echo Plus (modelo: ZE39KL)
   Echo Show de segunda xeración (modelo: DW2JL)
   Echo Plus de segunda xeración (modelo: L2D9R)
   Hub Samsung SmartThings
   Philips Hue
   Se a conexión falla, achega o concentrador ao teu teléfono e téntao de novo.
3. Encender
   Despois de acendelo, o dispositivo entrará no modo de sincronización durante o primeiro uso e o indicador de sinal LED parpadea.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Conéctate a Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Conéctate a SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Restablecemento de fábrica

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Feito en China

Documentos/Recursos

Módulo de interruptor de luz ZigBee [pdfManual do usuario Módulo de interruptor de luz, Módulo de interruptor, Módulo

Referencias

• Manual de usuario