ZigBee Smart Plug

Product Introduction

This document describes the ZigBee Smart Plug, a device designed for smart home automation.

Diagram Description: A visual representation of the ZigBee Smart Plug is provided. It shows the device from a top and side perspective. The top view features a circular pattern of dots. The side view highlights key components: a "Pairing Button/Manual Switch", a "Power / WiFi indicator light (blue)", and clearly labeled output/input terminals: "L-Out", "L-In", "N-In", "N-Out", "S1", and "S2".

The device weight is less than 1 kg. An installation height of less than 2 meters is recommended.

Installation Instructions

1. Power Off

Before proceeding with installation, ensure the power supply is turned off.[!] To avoid electric shocks, please consult the dealer or a qualified professional for help when installing and repairing.

Diagram Description: An illustration shows a standard electrical switch in the 'OFF' position, with an arrow indicating the action to turn it 'ON'.

2. Wiring Instruction

Make sure correct wiring is performed before powering the device on.

Diagram Description: A wiring diagram illustrates the connections. AC power (100-240V) is connected to the "L-In" and "N-In" terminals of the smart plug. The "L-Out" terminal is connected to the load (e.g., a light fixture), and the "N-Out" terminal is connected to the neutral wire. Terminals "S1" and "S2" are available for connecting a rocker light switch.

[!] Terminals S1/S2 can connect with the rocker light switch or be left unconnected. To ensure safety, do not connect the neutral wire and live wire to it.

Specifications

Features

The ZigBee plug is a smart plug that adopts the ZigBee plug wireless protocol and connects to your internet through a ZigBee hub. You can turn it on/off, schedule on/off, and share the device with your family for collective control.

• ? Remote Control
• ⏰ Timing Schedule
• ? Voice Control
• ? Share Control
• ? Smart Scene

? Above functions are determined by the ZigBee Hub.

Operating Instructions

1. Download the APP

Please refer to the user guide of your hub to download the corresponding APP. The following platforms are recommended:

• SmartThings
• Amazon Alexa
• Hue

2. Hub Connection

Set up the hub according to its user guide.

Diagram Description: A diagram shows a smartphone with dashed arrows indicating a wireless connection to a device labeled "HUB".

? Support ZigBee plug hubs include: Echo Studio, Echo Plus (model: ZE39KL), 2nd Gen Echo Show (model: DW84JL), 2nd Gen Echo Plus (model: L9D29R), Samsung SmartThings hub, Philips Hue.

? If the connection fails, please move the hub closer to your phone and try again.

3. Power On

After powering on, the device will enter the pairing mode during the first use, and the LED signal indicator will flash. The device will exit the pairing mode if no further operation occurs for a long time. To re-enter pairing mode, please long-press the manual switch for 5 seconds until the LED signal indicator flashes and then release.

4. Connect to Alexa

1. Power on the Plug.
2. Ask, "Alexa, discover devices!"
3. The Plug's indicator light will flash once it's connected.
4. Wait until Alexa finishes, then check for new devices named "First/Second....plug" (or similar).

Connect to SmartThings

1. Power up the smart bulb; the bulb will breathe 3 times and enter the configuration state.
2. Open the SmartThings app, and click "+".
3. Click "Device", then click "SmartThings".
4. Click "Lighting", then click "Smart Bulb".
5. Click "Start", then click "Next".
6. Click "Skip the step", then click "Done".

Factory Reset

Long-press the configuration button for 5 seconds until the LED signal indicator flashes, then release. The reset is successful, and the device enters pairing mode.

? If you need to pair the device with a hub again, please reset the device to factory default first.

Compliance and Manufacturing

The product complies with relevant standards, indicated by the following marks:

• [CE mark]
• [RoHS symbol]
• [WEEE symbol]

Made in China.